EP2C15AF256C6N - 14,448-Cell 500 MHz FPGA | Altera
MPN: EP2C15AF256C6N ✓ Hoạt độngEP2C15AF256C6N Tóm tắt
A field-programmable gate array is a reconfigurable digital semiconductor used to implement logic, state machines, interfaces, and parallel processing functions. The broader hierarchy is FPGA and CPLD, then programmable-logic semiconductor. Unlike fixed-function logic, an FPGA allows its hardware behavior to be changed through a configuration bitstream after manufacture, shortening development cycles and supporting product variants through a common PCB design.
The EP2C15AF256C6N combines 14,448 logic elements with 152 user I/O in a surface-mount 256-LBGA package. Its listed 500 MHz operating frequency supports demanding clocked logic, while 1.2 V core operation suits modern low-voltage digital systems. The commercial temperature grade is listed as 0 to 85 degrees Celsius, making the device appropriate for industrial equipment where operating conditions stay within that range.
Cyclone II devices use configurable logic elements, embedded memory, and programmable interconnect resources to support embedded processing and control architectures. The EP2C15 designation identifies the device family and resource level, while AF256 identifies the 256-ball package. Programming and board bring-up should follow the Cyclone II device-family data sheet and the exact pin-assignment table for this orderable part.
Typical applications include industrial control, communications infrastructure, instrumentation, consumer electronics, embedded control, and parallel signal processing. Its combination of 152 I/O and 14,448 logic elements is useful when a design needs many peripheral connections but does not justify the resources or cost of a much larger FPGA.
The primary layout consideration is the 256-LBGA land pattern. Follow the manufacturer pin-assignment, escape-routing, and decoupling guidance rather than relying on a generic BGA layout. Confirm that the PCB design has adequate fanout from the fine-pitch balls to the component power, ground, configuration, clock, and user-I/O routing layers.
This product record combines the device's key architecture, package, frequency, logic-cell, I/O, temperature, and sourcing information with practical FPGA design guidance and a clearly documented drop-in alternative assessment for engineers evaluating lifecycle and board-compatibility decisions.
Bộ thay thế dễ dàng lắp đặt cho EP2C15AF256C6N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EP2C15AF256C6N (cùng hình factor và footprint) — khác nhau ở Device Type, Logic Elements, Number of User I/O, Package Type, RoHS Status.
EP2C15AF256C6
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
EP2C15AF256C6N Tỷ lệ tối đa & tính chất điện
| Device Type | Cyclone II Field Programmable Gate Array (FPGA) |
| Logic Elements | 14,448 cells |
| User I/O Count | 152 I/O |
| Maximum Operating Frequency | 500 MHz |
| Core Supply Voltage | 1.2 V |
| Package Type | 256-LBGA |
| Total Package Pins | 256 pins |
| Kiểu lắp đặt | Surface Mount |
| Nhiệt độ hoạt động | 0 to 85 C |
| Manufacturer | Altera |
| Device Family | Cyclone II |
| Programmable Logic Type | FPGA |
Hướng dẫn cấu hình chân EP2C15AF256C6N 256 pins
Cấu hình chân cho EP2C15AF256C6N (256 pins gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho EP2C15AF256C6N.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
EP2C15AF256C6N phù hợp cho 6 Áp dụngs: Industrial PLC Control, Network Interface Equipment, Instrumentation and Data Acquisition, Video and Image Processing, Communications Gateway, Consumer and Embedded Control.
Industrial PLC Control
EP2C15AF256C6N fits compact programmable-logic controllers because 14,448 logic elements can implement sequencing, timers, interlocks, and machine-state logic while 152 user I/O connect field signals. The 500 MHz maximum operating frequency provides margin for parallel control paths, and the 1.2 V core supply aligns with modern digital power architectures. In a controller, the FPGA can execute deterministic acquisition and control logic beside communication interfaces while remaining within the listed 0 to 85 degrees Celsius range.
Được đề xuất
Network Interface Equipment
EP2C15AF256C6N is suitable for protocol bridging, packet processing, and network-interface control where parallel logic and numerous external connections are required. Its 14,448 logic elements support stateful datapaths, while 152 user I/O can connect transceivers, status signals, clocks, and control registers. The 500 MHz device speed helps implement parallel stages efficiently. Designers should use the Cyclone II I/O and clock documentation to establish voltage compatibility, timing margins, and bank constraints.
Được đề xuất
Instrumentation and Data Acquisition
EP2C15AF256C6N can implement digital measurement, sampling control, trigger logic, and instrument-control functions in a compact embedded architecture. The 152 I/O support parallel sensor connections and control signals, while 14,448 logic elements accommodate timing, filtering, and data-format conversion functions. Its listed 500 MHz maximum frequency is useful for clocked acquisition pipelines, although achievable system timing depends on the selected speed grade, external memory interface, pin assignments, and routing. Analog front-end design remains separate from the FPGA's digital core.
Được đề xuất
Video and Image Processing
EP2C15AF256C6N can support parallel image preprocessing, pixel transport, test-pattern generation, and display timing when the design fits its 14,448 logic elements and 152 I/O. Its 500 MHz maximum operating frequency enables clocked pixel pipelines, while the 1.2 V core supply simplifies integration with contemporary logic levels. Video timing, external memory, and high-speed interface constraints must be evaluated against the device-family data sheet. The FPGA is best suited to moderate-resolution parallel processing rather than unrestricted high-bandwidth video engines.
Được đề xuất
Communications Gateway
EP2C15AF256C6N is appropriate for small protocol gateways that must bridge several serial or parallel interfaces while performing buffering, framing, and routing in hardware. The 14,448 logic elements support concurrent fixed-function pipelines, and 152 I/O provide flexible connectivity for transceivers and control logic. At a listed maximum operating frequency of 500 MHz, the device can meet demanding packet-processing clock rates. Final timing closure requires the actual speed grade, clock tree, I/O standards, board topology, and configuration method.
Được đề xuất
Consumer and Embedded Control
EP2C15AF256C6N supports cost-sensitive products that need configurable control logic, user interfaces, and peripheral coordination without a dedicated microcontroller for every function. Its 14,448 logic elements and 152 I/O can consolidate timers, state machines, display control, and communication sequencing, while the 256-LBGA supports dense board layouts. The 1.2 V core operation and 0 to 85 degrees Celsius specification suit controlled consumer and embedded environments. Firmware and configuration storage requirements must be planned alongside the logic design.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EP2C15AF256C6N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EP2C15AF256C6 |
|---|---|---|
| Manufacturer | Altera | Altera |
| Package | 256-LBGA | 256-LBGA |
| Device Family | Cyclone II | Cyclone II |
Bảo phân biệt quan trọng
- Compact 14,448-cell implementation resource (vsEP2C15AF256C6)
- High user-interface connectivity (vsEP2C15AF256C6)
- Defined 500 MHz device speed (vsEP2C15AF256C6)
Ghi chú thiết kế
Design the PCB around the manufacturer land pattern for the AF256 package rather than a generic 256-ball BGA. Verify pad dimensions, solder-mask definition, ball-pitch tolerances, and the recommended via arrangement against the Cyclone II package drawing. Fine-pitch escape routing should be planned before placement because power, configuration pins, clocks, and 152 user I/O can make layer transitions difficult if the board stack-up leaves insufficient routing channels.
Separate the 1.2 V core rail from other supply requirements and follow the manufacturer's recommended decoupling and power-plane topology. Place high-frequency decoupling capacitors close to the device's power balls, while maintaining low-impedance connections between the power and ground planes. Calculate total rail dissipation from the selected logic utilization, core voltage, and device speed grade; then verify that the regulator, copper area, vias, and ambient temperature maintain the required core voltage at worst-case load.
Reserve clock and configuration-routing resources during floorplanning. Route the configuration interface away from high-current switching nodes, follow the manufacturer's guidance for configuration pins and pull resistors, and keep sensitive inputs away from noisy power converters and inductors. Because the device has 152 user I/O, assign pins according to supported banks and voltage standards before committing the schematic. This prevents late changes from invalidating the package escape-routing strategy.
Do not treat 500 MHz as a guaranteed system clock without completing timing analysis using the selected speed grade and actual design constraints. Resource utilization, routing congestion, memory interfaces, I/O standards, and clock topology can reduce achievable performance. Likewise, verify the exact EP2C15AF256C6N ordering code against the pin table before releasing PCB artwork, particularly if EP2C15AF256C6 is being considered as a substitute.
Thông tin tuân thủ
No explicit compliance declaration was identified for EP2C15AF256C6N. Confirm RoHS, REACH, halogen-free, and conflict-minerals status with the manufacturer using the exact orderable MPN.