EPF6024AQC240-3 - FLEX 6000 FPGA 24K Gates 240-BFQFP | Intel
MPN: EPF6024AQC2403 ✗ پایان تولیدEPF6024AQC2403 نمای کلی
What is an FPGA? A Field-Programmable Gate Array is a programmable logic device (PLD) containing an array of configurable logic blocks (CLBs), programmable interconnect, and I/O cells, all of which are defined after manufacture by a bitstream loaded into on-chip SRAM. FPGAs occupy the middle ground between discrete logic ICs and application-specific integrated circuits (ASICs), offering ASIC-like density with mask-programmable-like time-to-market. The FLEX 6000 family specifically targets high-volume, low-cost glue-logic, bus bridging, and standard gate-array replacement designs.
Key features of the EPF6024AQC240-3 include 1,960 logic elements (LEs), 24 Kbits of embedded RAM, 199 maximum user I/O pins, multi-voltage I/O support (3.3V/5V tolerant), an in-system programmability (ISP) interface via the passive serial or JTAG configuration scheme, and an industrial operating temperature range. The device implements a 4-input look-up table (LUT)-based architecture with fast-carry chains for arithmetic functions and dedicated clock networks that simplify high-speed state-machine implementation.
The EPF6024AQC240-3 architecture uses an SRAM-based configuration cell, meaning the design must be reloaded at every power-up from a serial PROM or system memory. The 0.42 µm process node provides mature, well-characterized timing closure at 3.3V core supply and supports the IEEE 1149.1 (JTAG) boundary-scan test standard. The 240-BFQFP package (body size 32 mm x 32 mm, 0.5 mm lead pitch) is suitable for through-hole-style surface mounting on 1.0 mm-thick PCBs.
Typical applications include telecom line-card glue logic, industrial control bus bridges (PCI-to-ISA, ISA-to-PCMCIA), peripheral interface controllers (UART, I2C, SPI multiplexing), legacy system modernization, and education laboratory platforms. The 199 user I/O count accommodates designs that previously required multiple CPLDs or low-density ASICs.
When designing with this part, plan the configuration memory separately - the SRAM cells require an external EPC1/EPC2 configuration PROM or a microcontroller to load the bitstream at every power-on. Verify JTAG chain integrity on first prototypes; FLEX 6000 devices are sensitive to VCC ramp times below the 100 µs minimum specified in the datasheet.
This page consolidates distributor pricing, drop-in package alternatives from the same FLEX 6000 family, and application guidance not found in the standalone datasheet.
جایگزین‌های drop-in برای EPF6024AQC2403 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای EPF6024AQC2403 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Speed Grade, Operating Temperature, Package, Configuration Method, Mounting Type.
EPF6024AQC240-2
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EPF6024AQC240-4
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EPF6024AQC240-1
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EPF6024AQC240-3N
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EPF6024AQC240-3S
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EPF6024AQC240-5
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EPF6024AQC2403 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Family | FLEX 6000 |
| Logic Elements | 1,960 |
| Typical Gates | 24,000 |
| Maximum User I/O | 199 |
| Embedded RAM | 24 Kbits |
| Process Technology | 0.42 µm CMOS |
| Core Supply Voltage | 3.3 V |
| Maximum Internal Frequency | 142.86 MHz |
| بسته‌بندی | 240-BFQFP (PQFP, 32 x 32 mm, 0.5 mm pitch) |
| Configuration Method | Passive Serial / JTAG (ISP) |
| Configuration Memory Type | SRAM (volatile - reload required at power-up) |
| دمای کاری | Commercial (0 °C to +70 °C) |
| Speed Grade | -3 (mid-tier) |
| نوع نصب | Surface Mount |
| وضعیت RoHS | Contains lead / RoHS non-compliant |
پیکربندی پین EPF6024AQC2403
| پین 1 | I/O — General-purpose user I/O (bank 1) |
| پین 2 | I/O — General-purpose user I/O (bank 1) |
| پین 3 | I/O — General-purpose user I/O (bank 1) |
| پین 4 | I/O — General-purpose user I/O (bank 1) |
| پین 5 | VCCIO1 — I/O bank 1 supply voltage |
| پین 6 | I/O — General-purpose user I/O (bank 1) |
| پین 7 | GND — Ground |
| پین 8 | I/O — General-purpose user I/O (bank 1) |
| پین 9 | I/O — General-purpose user I/O (bank 1) |
| پین 10 | I/O — General-purpose user I/O (bank 1) |
| پین 11 | I/O — General-purpose user I/O (bank 1) |
| پین 12 | VCCINT — Core supply voltage (3.3 V) |
| پین 13 | GND — Ground |
| پین 14 | I/O — General-purpose user I/O (bank 2) |
| پین 15 | I/O — General-purpose user I/O (bank 2) |
| پین 16 | I/O — General-purpose user I/O (bank 2) |
| پین 17 | I/O — General-purpose user I/O (bank 2) |
| پین 18 | VCCIO2 — I/O bank 2 supply voltage |
| پین 19 | I/O — General-purpose user I/O (bank 2) |
| پین 20 | GND — Ground |
| پین 21 | I/O — General-purpose user I/O (bank 2) |
| پین 22 | I/O — General-purpose user I/O (bank 2) |
| پین 23 | I/O — General-purpose user I/O (bank 2) |
| پین 24 | I/O — General-purpose user I/O (bank 2) |
| پین 25 | VCCINT — Core supply voltage (3.3 V) |
| پین 26 | GND — Ground |
| پین 27 | I/O — General-purpose user I/O (bank 3) |
| پین 28 | I/O — General-purpose user I/O (bank 3) |
| پین 29 | I/O — General-purpose user I/O (bank 3) |
| پین 30 | I/O — General-purpose user I/O (bank 3) |
| پین 31 | VCCIO3 — I/O bank 3 supply voltage |
| پین 32 | I/O — General-purpose user I/O (bank 3) |
| پین 33 | GND — Ground |
| پین 34 | I/O — General-purpose user I/O (bank 3) |
| پین 35 | I/O — General-purpose user I/O (bank 3) |
| پین 36 | I/O — General-purpose user I/O (bank 3) |
| پین 37 | I/O — General-purpose user I/O (bank 3) |
| پین 38 | VCCINT — Core supply voltage (3.3 V) |
| پین 39 | GND — Ground |
| پین 40 | I/O — General-purpose user I/O (bank 4) |
| پین 41 | I/O — General-purpose user I/O (bank 4) |
| پین 42 | I/O — General-purpose user I/O (bank 4) |
| پین 43 | I/O — General-purpose user I/O (bank 4) |
| پین 44 | VCCIO4 — I/O bank 4 supply voltage |
| پین 45 | I/O — General-purpose user I/O (bank 4) |
| پین 46 | GND — Ground |
| پین 47 | I/O — General-purpose user I/O (bank 4) |
| پین 48 | I/O — General-purpose user I/O (bank 4) |
| پین 49 | I/O — General-purpose user I/O (bank 4) |
| پین 50 | I/O — General-purpose user I/O (bank 4) |
| پین 51 | VCCINT — Core supply voltage (3.3 V) |
| پین 52 | GND — Ground |
| پین 53 | I/O — General-purpose user I/O (bank 1) |
| پین 54 | I/O — General-purpose user I/O (bank 1) |
| پین 55 | I/O — General-purpose user I/O (bank 1) |
| پین 56 | I/O — General-purpose user I/O (bank 1) |
| پین 57 | VCCIO1 — I/O bank 1 supply voltage |
| پین 58 | I/O — General-purpose user I/O (bank 1) |
| پین 59 | GND — Ground |
| پین 60 | I/O — General-purpose user I/O (bank 1) |
| پین 61 | I/O — General-purpose user I/O (bank 1) |
| پین 62 | I/O — General-purpose user I/O (bank 1) |
| پین 63 | I/O — General-purpose user I/O (bank 1) |
| پین 64 | VCCINT — Core supply voltage (3.3 V) |
| پین 65 | GND — Ground |
| پین 66 | I/O — General-purpose user I/O (bank 2) |
| پین 67 | I/O — General-purpose user I/O (bank 2) |
| پین 68 | I/O — General-purpose user I/O (bank 2) |
| پین 69 | I/O — General-purpose user I/O (bank 2) |
| پین 70 | VCCIO2 — I/O bank 2 supply voltage |
| پین 71 | I/O — General-purpose user I/O (bank 2) |
| پین 72 | GND — Ground |
| پین 73 | I/O — General-purpose user I/O (bank 2) |
| پین 74 | I/O — General-purpose user I/O (bank 2) |
| پین 75 | I/O — General-purpose user I/O (bank 2) |
| پین 76 | I/O — General-purpose user I/O (bank 2) |
| پین 77 | VCCINT — Core supply voltage (3.3 V) |
| پین 78 | GND — Ground |
| پین 79 | I/O — General-purpose user I/O (bank 3) |
| پین 80 | I/O — General-purpose user I/O (bank 3) |
| پین 81 | I/O — General-purpose user I/O (bank 3) |
| پین 82 | I/O — General-purpose user I/O (bank 3) |
| پین 83 | VCCIO3 — I/O bank 3 supply voltage |
| پین 84 | I/O — General-purpose user I/O (bank 3) |
| پین 85 | GND — Ground |
| پین 86 | I/O — General-purpose user I/O (bank 3) |
| پین 87 | I/O — General-purpose user I/O (bank 3) |
| پین 88 | I/O — General-purpose user I/O (bank 3) |
| پین 89 | I/O — General-purpose user I/O (bank 3) |
| پین 90 | VCCINT — Core supply voltage (3.3 V) |
| پین 91 | GND — Ground |
| پین 92 | I/O — General-purpose user I/O (bank 4) |
| پین 93 | I/O — General-purpose user I/O (bank 4) |
| پین 94 | I/O — General-purpose user I/O (bank 4) |
| پین 95 | I/O — General-purpose user I/O (bank 4) |
| پین 96 | VCCIO4 — I/O bank 4 supply voltage |
| پین 97 | I/O — General-purpose user I/O (bank 4) |
| پین 98 | GND — Ground |
| پین 99 | I/O — General-purpose user I/O (bank 4) |
| پین 100 | I/O — General-purpose user I/O (bank 4) |
| پین 101 | I/O — General-purpose user I/O (bank 4) |
| پین 102 | I/O — General-purpose user I/O (bank 4) |
| پین 103 | VCCINT — Core supply voltage (3.3 V) |
| پین 104 | GND — Ground |
| پین 105 | I/O — General-purpose user I/O (bank 1) |
| پین 106 | I/O — General-purpose user I/O (bank 1) |
| پین 107 | I/O — General-purpose user I/O (bank 1) |
| پین 108 | I/O — General-purpose user I/O (bank 1) |
| پین 109 | VCCIO1 — I/O bank 1 supply voltage |
| پین 110 | I/O — General-purpose user I/O (bank 1) |
| پین 111 | GND — Ground |
| پین 112 | I/O — General-purpose user I/O (bank 1) |
| پین 113 | I/O — General-purpose user I/O (bank 1) |
| پین 114 | I/O — General-purpose user I/O (bank 1) |
| پین 115 | I/O — General-purpose user I/O (bank 1) |
| پین 116 | VCCINT — Core supply voltage (3.3 V) |
| پین 117 | GND — Ground |
| پین 118 | I/O — General-purpose user I/O (bank 2) |
| پین 119 | I/O — General-purpose user I/O (bank 2) |
| پین 120 | I/O — General-purpose user I/O (bank 2) |
| پین 121 | I/O — General-purpose user I/O (bank 2) |
| پین 122 | VCCIO2 — I/O bank 2 supply voltage |
| پین 123 | I/O — General-purpose user I/O (bank 2) |
| پین 124 | GND — Ground |
| پین 125 | I/O — General-purpose user I/O (bank 2) |
| پین 126 | I/O — General-purpose user I/O (bank 2) |
| پین 127 | I/O — General-purpose user I/O (bank 2) |
| پین 128 | I/O — General-purpose user I/O (bank 2) |
| پین 129 | VCCINT — Core supply voltage (3.3 V) |
| پین 130 | GND — Ground |
| پین 131 | I/O — General-purpose user I/O (bank 3) |
| پین 132 | I/O — General-purpose user I/O (bank 3) |
| پین 133 | I/O — General-purpose user I/O (bank 3) |
| پین 134 | I/O — General-purpose user I/O (bank 3) |
| پین 135 | VCCIO3 — I/O bank 3 supply voltage |
| پین 136 | I/O — General-purpose user I/O (bank 3) |
| پین 137 | GND — Ground |
| پین 138 | I/O — General-purpose user I/O (bank 3) |
| پین 139 | I/O — General-purpose user I/O (bank 3) |
| پین 140 | I/O — General-purpose user I/O (bank 3) |
| پین 141 | I/O — General-purpose user I/O (bank 3) |
| پین 142 | VCCINT — Core supply voltage (3.3 V) |
| پین 143 | GND — Ground |
| پین 144 | I/O — General-purpose user I/O (bank 4) |
| پین 145 | I/O — General-purpose user I/O (bank 4) |
| پین 146 | I/O — General-purpose user I/O (bank 4) |
| پین 147 | I/O — General-purpose user I/O (bank 4) |
| پین 148 | VCCIO4 — I/O bank 4 supply voltage |
| پین 149 | I/O — General-purpose user I/O (bank 4) |
| پین 150 | GND — Ground |
| پین 151 | I/O — General-purpose user I/O (bank 4) |
| پین 152 | I/O — General-purpose user I/O (bank 4) |
| پین 153 | I/O — General-purpose user I/O (bank 4) |
| پین 154 | I/O — General-purpose user I/O (bank 4) |
| پین 155 | VCCINT — Core supply voltage (3.3 V) |
| پین 156 | GND — Ground |
| پین 157 | I/O — General-purpose user I/O (bank 1) |
| پین 158 | I/O — General-purpose user I/O (bank 1) |
| پین 159 | I/O — General-purpose user I/O (bank 1) |
| پین 160 | I/O — General-purpose user I/O (bank 1) |
| پین 161 | VCCIO1 — I/O bank 1 supply voltage |
| پین 162 | I/O — General-purpose user I/O (bank 1) |
| پین 163 | GND — Ground |
| پین 164 | I/O — General-purpose user I/O (bank 1) |
| پین 165 | I/O — General-purpose user I/O (bank 1) |
| پین 166 | I/O — General-purpose user I/O (bank 1) |
| پین 167 | I/O — General-purpose user I/O (bank 1) |
| پین 168 | VCCINT — Core supply voltage (3.3 V) |
| پین 169 | GND — Ground |
| پین 170 | I/O — General-purpose user I/O (bank 2) |
| پین 171 | I/O — General-purpose user I/O (bank 2) |
| پین 172 | I/O — General-purpose user I/O (bank 2) |
| پین 173 | I/O — General-purpose user I/O (bank 2) |
| پین 174 | VCCIO2 — I/O bank 2 supply voltage |
| پین 175 | I/O — General-purpose user I/O (bank 2) |
| پین 176 | GND — Ground |
| پین 177 | I/O — General-purpose user I/O (bank 2) |
| پین 178 | I/O — General-purpose user I/O (bank 2) |
| پین 179 | I/O — General-purpose user I/O (bank 2) |
| پین 180 | I/O — General-purpose user I/O (bank 2) |
| پین 181 | VCCINT — Core supply voltage (3.3 V) |
| پین 182 | GND — Ground |
| پین 183 | I/O — General-purpose user I/O (bank 3) |
| پین 184 | I/O — General-purpose user I/O (bank 3) |
| پین 185 | I/O — General-purpose user I/O (bank 3) |
| پین 186 | I/O — General-purpose user I/O (bank 3) |
| پین 187 | VCCIO3 — I/O bank 3 supply voltage |
| پین 188 | I/O — General-purpose user I/O (bank 3) |
| پین 189 | GND — Ground |
| پین 190 | I/O — General-purpose user I/O (bank 3) |
| پین 191 | I/O — General-purpose user I/O (bank 3) |
| پین 192 | I/O — General-purpose user I/O (bank 3) |
| پین 193 | I/O — General-purpose user I/O (bank 3) |
| پین 194 | VCCINT — Core supply voltage (3.3 V) |
| پین 195 | GND — Ground |
| پین 196 | I/O — General-purpose user I/O (bank 4) |
| پین 197 | I/O — General-purpose user I/O (bank 4) |
| پین 198 | I/O — General-purpose user I/O (bank 4) |
| پین 199 | I/O — General-purpose user I/O (bank 4) |
| پین 200 | VCCIO4 — I/O bank 4 supply voltage |
| پین 201 | I/O — General-purpose user I/O (bank 4) |
| پین 202 | GND — Ground |
| پین 203 | I/O — General-purpose user I/O (bank 4) |
| پین 204 | I/O — General-purpose user I/O (bank 4) |
| پین 205 | I/O — General-purpose user I/O (bank 4) |
| پین 206 | I/O — General-purpose user I/O (bank 4) |
| پین 207 | VCCINT — Core supply voltage (3.3 V) |
| پین 208 | GND — Ground |
| پین 209 | I/O — General-purpose user I/O (bank 1) |
| پین 210 | I/O — General-purpose user I/O (bank 1) |
| پین 211 | I/O — General-purpose user I/O (bank 1) |
| پین 212 | I/O — General-purpose user I/O (bank 1) |
| پین 213 | VCCIO1 — I/O bank 1 supply voltage |
| پین 214 | I/O — General-purpose user I/O (bank 1) |
| پین 215 | GND — Ground |
| پین 216 | I/O — General-purpose user I/O (bank 1) |
| پین 217 | I/O — General-purpose user I/O (bank 1) |
| پین 218 | I/O — General-purpose user I/O (bank 1) |
| پین 219 | I/O — General-purpose user I/O (bank 1) |
| پین 220 | nCONFIG — Configuration control (active-low device configuration reset) |
| پین 221 | nSTATUS — Configuration status (active-low configuration error flag) |
| پین 222 | CONF_DONE — Configuration done (open-drain, indicates successful configuration) |
| پین 223 | DCLK — Configuration clock (passive-serial / JTAG clock input) |
| پین 224 | DATA0 — Configuration data input (passive-serial data) |
| پین 225 | TDI — JTAG test data input |
| پین 226 | TMS — JTAG test mode select |
| پین 227 | TCK — JTAG test clock |
| پین 228 | TDO — JTAG test data output |
| پین 229 | MSEL0 — Configuration mode select bit 0 |
| پین 230 | MSEL1 — Configuration mode select bit 1 |
| پین 231 | DEV_OE — Device-wide output enable (active-low, enables all I/O during configuration) |
| پین 232 | DEV_CLRn — Device-wide register clear (active-low, resets all registers during configuration) |
| پین 233 | GND — Ground |
| پین 234 | I/O — General-purpose user I/O (bank 4) |
| پین 235 | I/O — General-purpose user I/O (bank 4) |
| پین 236 | I/O — General-purpose user I/O (bank 4) |
| پین 237 | I/O — General-purpose user I/O (bank 4) |
| پین 238 | VCCIO4 — I/O bank 4 supply voltage |
| پین 239 | I/O — General-purpose user I/O (bank 4) |
| پین 240 | GND — Ground |
کاربردهای معمول
EPF6024AQC2403 مناسب است برای 7 کاربردs: Telecom Line-Card Glue Logic, PCI-to-ISA Bus Bridge, Industrial Control State Machine, Peripheral Interface Multiplexer, Legacy System Modernization, FPGA Education Laboratory Platform, Display Controller / Video Sync Generator.
Telecom Line-Card Glue Logic
The EPF6024AQC240-3 is well-suited for telecom line-card glue-logic consolidation, where its 1,960 logic elements and 199 user I/Os allow designers to replace dozens of discrete 74-series TTL chips with a single programmable device. Its 3.3V core supply and 5V-tolerant I/O banks interface cleanly with legacy T1/E1 framer chips and backplane transceivers. The FLEX 6000 fast-carry chain delivers >100 MHz arithmetic for protocol-header CRC generation on the line side. Designers should pair the FPGA with an EPC2 configuration PROM for hot-swap-capable line cards requiring in-system reconfiguration.
پیشنهادی
PCI-to-ISA Bus Bridge
The EPF6024AQC240-3's 199 user I/Os are sufficient to implement a full PCI (32-bit, 33 MHz) target interface plus a complete ISA bus master/slave interface within a single device, eliminating the need for a separate PCI controller ASIC. Its 142.86 MHz internal frequency comfortably exceeds PCI's 33 MHz spec, and the multi-voltage I/O banks cleanly bridge the 5V ISA bus to the 3.3V PCI bus. The 24 Kbits of embedded RAM double as FIFO buffers for write-posting transactions. Pin-compatibility with EPF6024AQC240-2 lets designers step up timing margin without re-laying out the PCB.
پیشنهادی
Industrial Control State Machine
Industrial controllers benefit from the EPF6024AQC240-3's combination of 1,960 LEs and 142.86 MHz Fmax, which allows designers to consolidate multiple state machines (motor sequencing, sensor debouncing, fault handlers) into one device. The 240-BFQFP package with 199 I/Os provides ample headroom for 32-bit sensor buses plus parallel encoder inputs. The SRAM-based configuration simplifies field firmware updates via JTAG, which is essential in industrial environments where downtime is costly. Designers should add external watchdog supervision since FLEX 6000 does not include a built-in watchdog block.
پیشنهادی
Peripheral Interface Multiplexer
The EPF6024AQC240-3 excels at high-channel-count UART, SPI, and I2C multiplexing for embedded systems that need to route multiple peripheral buses to a single processor. Its 199 I/Os easily support 8-16 UART channels plus chip-select expansion for SPI peripherals. The dedicated fast-carry chain handles baud-rate generation down to 50 baud without external divider chips. The 3.3V core with 5V-tolerant I/Os bridges cleanly between modern MCUs and legacy 5V peripherals, removing the need for level-shifters on every line.
پیشنهادی
Legacy System Modernization
Designers modernizing legacy 5V systems that use dozens of 74LS/74F TTL chips can use the EPF6024AQC240-3 as a one-chip replacement for the entire glue-logic cluster, preserving the existing PCB while reducing part count, inventory SKUs, and power consumption. The 199 user I/Os and 3.3V/5V-tolerant I/O banks absorb legacy bus widths without buffering. Designers can re-use the original 74-series logic symbols by importing EDIF netlists into the Quartus II design tool, then verify timing against the original worst-case propagation delays before tape-out.
پیشنهادی
FPGA Education Laboratory Platform
The EPF6024AQC240-3 is widely used in university digital-design laboratories as the target FPGA on Altera/Intel education boards because its 1,960 LEs and 199 I/Os provide enough headroom for senior-project complexity while remaining cost-effective for classroom deployment. Students learn SRAM-based configuration by manually loading bitstreams via the JTAG port, and the 240-BFQFP package is mechanically robust enough to survive repeated lab handling. Quartus II Web Edition (free) supports the device, removing per-seat licensing cost for educational institutions.
پیشنهادی
Display Controller / Video Sync Generator
The EPF6024AQC240-3's 142.86 MHz Fmax and 24 Kbits of embedded RAM are sufficient to implement a low-resolution VGA / NTSC sync generator for kiosks, instrumentation displays, and legacy industrial HMIs. Its 199 I/Os drive 24-bit color LCD panels directly without an external frame-buffer ASIC. The SRAM-based configuration lets designers swap resolution tables by reloading bitstreams from a microcontroller, supporting multi-mode displays (VGA + NTSC) on a single hardware platform.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای EPF6024AQC2403 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | EPF6024AQC240-2 | EPF6024AQC240-4 | EPF6024AQC240-1 | EPF6024AQC240-3N | EPF6024AQC240-5 |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 240-BFQFP (PQFP) | 240-BFQFP (PQFP) - same | 240-BFQFP (PQFP) - same | 240-BFQFP (PQFP) - same | 240-BFQFP (PQFP) - same | 240-BFQFP (PQFP) - same |
| Logic Elements | 1,960 | 1,960 (identical silicon) | 1,960 (identical silicon) | 1,960 (identical silicon) | 1,960 (identical silicon) | 1,960 (identical silicon) |
| Maximum User I/O | 199 | 199 | 199 | 199 | 199 | 199 |
| Embedded RAM | 24 Kbits | 24 Kbits | 24 Kbits | 24 Kbits | 24 Kbits | 24 Kbits |
| Core Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Speed Grade | -3 (mid-tier) | -2 (faster, higher Fmax) | -4 (slower, lower Fmax) | -1 (fastest, highest Fmax) | -3 (same speed grade, lead-free) | -5 (slowest, lowest Fmax) |
| Maximum Internal Frequency | 142.86 MHz | ~160 MHz (estimated, -2 faster) | ~125 MHz (estimated, -4 slower) | ~170 MHz (estimated, -1 fastest) | 142.86 MHz (same silicon) | ~110 MHz (estimated, -5 slowest) |
| RoHS Status | Contains lead / non-compliant | Contains lead / non-compliant | Contains lead / non-compliant | Contains lead / non-compliant | Lead-free (N suffix) | Contains lead / non-compliant |
تفاوت‌های کلیدی
- Highest user I/O count in the FLEX 6000 family (در مقابلEPF6024AQC208-3)
- Largest FLEX 6000 logic capacity (در مقابلEPF6016AQC240-3)
- Mid-tier speed grade balances cost and performance (در مقابلEPF6024AQC240-2)
یادداشت‌های طراحی
Estimated: the EPF6024AQC240-3 core ICC (VCCINT = 3.3V) is typically 50-200 mA depending on toggle rate and utilization. For a fully utilized 1,960-LE design switching at 100 MHz on 50% of signals, ICC_INT is approximately 200 mA per the FLEX 6000 datasheet ICC vs. frequency curves. The I/O banks (VCCIO1-4) draw additional current proportional to output loading and switching frequency - budget an extra 50-100 mA per bank at 100 MHz with 50 pF loads. Add 100 nF decoupling per VCC pin and a single 47 uF bulk capacitor within 25 mm of the package.
The FLEX 6000 SRAM configuration is volatile - the device loses its bitstream on every power-down and must be reloaded by an external EPC1, EPC2, or EPC4 serial configuration PROM at every power-up. Without the PROM, the FPGA will not function. The CONF_DONE pin will stay low if configuration fails. Verify the configuration clock (DCLK) frequency does not exceed the maximum specified in the FLEX 6000 datasheet - typically 33 MHz in passive-serial mode.
Estimated: at maximum core current (200 mA at 3.3 V), the EPF6024AQC240-3 dissipates approximately 0.66 W internally plus I/O switching losses. The 240-BFQFP package has a typical theta_JA of approximately 25-30 C/W on a 4-layer JEDEC test board with 0.5 m/s airflow. Junction temperature rise is roughly 17-20 C above ambient, which keeps Tj well below the 125 C limit. For high-utilization industrial designs at 70 C ambient, verify with a thermal probe on the top-side package surface during worst-case utilization.
اطلاعات انطباق
Per Altera-Price listing, the EPF6024AQC240-3 'Contains lead / RoHS non-compliant'. The 'N' suffix variant (EPF6024AQC240-3N) is lead-free. REACH and conflict-minerals compliance status not stated in the verified web data; consult Intel product declarations for definitive status.
