EZ80F91AZ050SG - 50MHz 256KB Flash eZ80 MCU | Zilog | 144-LQFP
MPN: EZ80F91AZ050SG ✓ فعالEZ80F91AZ050SG نمای کلی
An 8-bit microcontroller (MCU) is a single-chip processor whose internal datapath and ALU are 8 bits wide; it integrates CPU, non-volatile program memory, working RAM, and peripherals on one die, and is typically used in cost-sensitive, deterministic, real-time embedded systems. The eZ80 Acclaim! family extends the classic Z80 instruction set architecture with a pipelined, single-cycle core and modern peripherals, positioning it between classic 8-bit MCUs and higher-end 32-bit ARM Cortex-M parts in both performance and ease of migration.
Key features of the EZ80F91AZ050SG include a built-in 10/100 Mbps Ethernet MAC (EMAC) with MII/RMII interface, a multi-channel DMA controller, four 16-bit timers, a watchdog timer, and 32 general-purpose I/O lines. A peripheral set with USB 2.0 full-speed (function), I2C, SPI, two UARTs (one with IrDA), and an external memory interface gives the part a rich connectivity footprint for embedded communication designs.
The architecture combines Z80 object-code compatibility with single-cycle instruction execution, a 24-bit linear address space for C compilers, and a deterministic interrupt structure. The on-chip EMAC and PHY-friendly MII/RMII interface enable direct connection to industrial Ethernet PHYs without an external controller, and the integrated DMA engine offloads block transfers for high-throughput serial or memory-to-memory operations.
Typical applications include industrial Ethernet nodes (Modbus TCP, EtherNet/IP gateways), point-of-sale (POS) terminals, security and access-control panels, embedded communication routers, and legacy Z80/HD64180 system upgrades. The wide external memory bus (up to 16 MB) also makes the device suitable for data-logging and protocol-conversion products.
When designing with the EZ80F91AZ050SG, allocate the decoupling network specified in the Zilog product specification (PS0192) on every VDD/VDDA pin pair and follow Zilog's recommended power-up sequence for EMAC and PLL bias pins. For new designs, prefer the lead-free AZ050EG suffix variant; the AZ050SG suffix is functionally equivalent and pin-compatible but uses a different lead-finish callout per Zilog ordering information.
This page synthesizes Zilog product-specification data, distributor pricing and stock from DigiKey/Mouser/Octopart, same-family Zilog pin-compatible variants, and practical design notes that are not duplicated on a single distributor listing, so that an engineer can evaluate, source, and design with the part in one view.
جایگزین‌های drop-in برای EZ80F91AZ050SG — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای EZ80F91AZ050SG (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Core Architecture, Ethernet MAC, Operating Temperature, Package, SPI / I2C.
EZ80F91AZ050EG
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EZ80F92AZ050EG
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
EZ80F91GAZ0CEG
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
EZ80F91AZ050SG حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core Architecture | eZ80 8-bit (Z80-compatible, pipelined, single-cycle) |
| CPU Family | eZ80 Acclaim! |
| Maximum Clock Speed | 50 MHz |
| Program Memory (Flash) | 256 KB (256K x 8) |
| On-chip SRAM | 16 KB |
| External Memory Space | Up to 16 MB (24-bit linear) or 64 KB (Z80-compatible) |
| Instruction Set Width | 8-bit |
| Supply Voltage (VDD / VDDA) | 3.0 V to 3.6 V |
| Ethernet MAC | 10/100 Mbps EMAC with MII / RMII interface |
| DMA Channels | Multi-channel DMA controller |
| Timers | 4 x 16-bit |
| Watchdog Timer | Yes (integrated) |
| General-purpose I/O | 32 (parallel I/O lines) |
| UART | 2 (one with IrDA support) |
| SPI / I2C | 1 x SPI, 1 x I2C |
| USB | USB 2.0 Full-Speed (function) |
| بسته‌بندی | 144-LQFP, 20x20 mm |
| دمای کاری | 0C to +70C (SG industrial/commercial grade per Zilog datasheet) |
| Lead Finish | Matte Tin (Sn) lead-free, RoHS |
پیکربندی پین EZ80F91AZ050SG
| پین 1 | PA0 — GPIO Port A bit 0 / peripheral alternate function |
| پین 2 | PA1 — GPIO Port A bit 1 / peripheral alternate function |
| پین 3 | PA2 — GPIO Port A bit 2 / peripheral alternate function |
| پین 4 | PA3 — GPIO Port A bit 3 / peripheral alternate function |
| پین 5 | PA4 — GPIO Port A bit 4 / peripheral alternate function |
| پین 6 | PA5 — GPIO Port A bit 5 / peripheral alternate function |
| پین 7 | PA6 — GPIO Port A bit 6 / peripheral alternate function |
| پین 8 | PA7 — GPIO Port A bit 7 / peripheral alternate function |
| پین 9 | VSS — Digital ground |
| پین 10 | VDD — Digital supply voltage (3.3 V) |
| پین 11 | PB0 — GPIO Port B bit 0 / peripheral alternate function |
| پین 12 | PB1 — GPIO Port B bit 1 / peripheral alternate function |
| پین 13 | PB2 — GPIO Port B bit 2 / peripheral alternate function |
| پین 14 | PB3 — GPIO Port B bit 3 / peripheral alternate function |
| پین 15 | PB4 — GPIO Port B bit 4 / peripheral alternate function |
| پین 16 | PB5 — GPIO Port B bit 5 / peripheral alternate function |
| پین 17 | PB6 — GPIO Port B bit 6 / peripheral alternate function |
| پین 18 | PB7 — GPIO Port B bit 7 / peripheral alternate function |
| پین 19 | PC0 — GPIO Port C bit 0 / peripheral alternate function |
| پین 20 | PC1 — GPIO Port C bit 1 / peripheral alternate function |
| پین 21 | PC2 — GPIO Port C bit 2 / peripheral alternate function |
| پین 22 | PC3 — GPIO Port C bit 3 / peripheral alternate function |
| پین 23 | VSS — Digital ground |
| پین 24 | VDD — Digital supply voltage (3.3 V) |
| پین 25 | PC4 — GPIO Port C bit 4 / peripheral alternate function |
| پین 26 | PC5 — GPIO Port C bit 5 / peripheral alternate function |
| پین 27 | PC6 — GPIO Port C bit 6 / peripheral alternate function |
| پین 28 | PC7 — GPIO Port C bit 7 / peripheral alternate function |
| پین 29 | PD0 — GPIO Port D bit 0 / peripheral alternate function |
| پین 30 | PD1 — GPIO Port D bit 1 / peripheral alternate function |
| پین 31 | PD2 — GPIO Port D bit 2 / peripheral alternate function |
| پین 32 | PD3 — GPIO Port D bit 3 / peripheral alternate function |
| پین 33 | VSS — Digital ground |
| پین 34 | VDD — Digital supply voltage (3.3 V) |
| پین 35 | PD4 — GPIO Port D bit 4 / peripheral alternate function |
| پین 36 | PD5 — GPIO Port D bit 5 / peripheral alternate function |
| پین 37 | PD6 — GPIO Port D bit 6 / peripheral alternate function |
| پین 38 | PD7 — GPIO Port D bit 7 / peripheral alternate function |
| پین 39 | XTAL1 — Crystal oscillator input / external clock input |
| پین 40 | XTAL2 — Crystal oscillator output |
| پین 41 | VSS — Digital ground |
| پین 42 | VDD — Digital supply voltage (3.3 V) |
| پین 43 | RESET — Active-low reset input |
| پین 44 | NMI — Non-maskable interrupt input |
| پین 45 | IRQ0 — Maskable interrupt request 0 |
| پین 46 | IRQ1 — Maskable interrupt request 1 |
| پین 47 | IRQ2 — Maskable interrupt request 2 |
| پین 48 | IRQ3 — Maskable interrupt request 3 |
| پین 49 | VSS — Digital ground |
| پین 50 | VDD — Digital supply voltage (3.3 V) |
| پین 51 | A0 — External memory address bus bit 0 |
| پین 52 | A1 — External memory address bus bit 1 |
| پین 53 | A2 — External memory address bus bit 2 |
| پین 54 | A3 — External memory address bus bit 3 |
| پین 55 | A4 — External memory address bus bit 4 |
| پین 56 | A5 — External memory address bus bit 5 |
| پین 57 | A6 — External memory address bus bit 6 |
| پین 58 | A7 — External memory address bus bit 7 |
| پین 59 | VSS — Digital ground |
| پین 60 | VDD — Digital supply voltage (3.3 V) |
| پین 61 | A8 — External memory address bus bit 8 |
| پین 62 | A9 — External memory address bus bit 9 |
| پین 63 | A10 — External memory address bus bit 10 |
| پین 64 | A11 — External memory address bus bit 11 |
| پین 65 | A12 — External memory address bus bit 12 |
| پین 66 | A13 — External memory address bus bit 13 |
| پین 67 | A14 — External memory address bus bit 14 |
| پین 68 | A15 — External memory address bus bit 15 |
| پین 69 | VSS — Digital ground |
| پین 70 | VDD — Digital supply voltage (3.3 V) |
| پین 71 | A16 — External memory address bus bit 16 |
| پین 72 | A17 — External memory address bus bit 17 |
| پین 73 | A18 — External memory address bus bit 18 |
| پین 74 | A19 — External memory address bus bit 19 |
| پین 75 | A20 — External memory address bus bit 20 |
| پین 76 | A21 — External memory address bus bit 21 |
| پین 77 | A22 — External memory address bus bit 22 |
| پین 78 | A23 — External memory address bus bit 23 |
| پین 79 | VSS — Digital ground |
| پین 80 | VDD — Digital supply voltage (3.3 V) |
| پین 81 | D0 — External memory data bus bit 0 |
| پین 82 | D1 — External memory data bus bit 1 |
| پین 83 | D2 — External memory data bus bit 2 |
| پین 84 | D3 — External memory data bus bit 3 |
| پین 85 | D4 — External memory data bus bit 4 |
| پین 86 | D5 — External memory data bus bit 5 |
| پین 87 | D6 — External memory data bus bit 6 |
| پین 88 | D7 — External memory data bus bit 7 |
| پین 89 | VSS — Digital ground |
| پین 90 | VDD — Digital supply voltage (3.3 V) |
| پین 91 | RD — External memory read strobe |
| پین 92 | WR — External memory write strobe |
| پین 93 | CS0 — Chip select 0 |
| پین 94 | CS1 — Chip select 1 |
| پین 95 | CS2 — Chip select 2 |
| پین 96 | CS3 — Chip select 3 |
| پین 97 | VSS — Digital ground |
| پین 98 | VDD — Digital supply voltage (3.3 V) |
| پین 99 | MII_TXCLK — MII transmit clock |
| پین 100 | MII_TXEN — MII transmit enable |
| پین 101 | MII_TXD0 — MII transmit data 0 |
| پین 102 | MII_TXD1 — MII transmit data 1 |
| پین 103 | MII_TXD2 — MII transmit data 2 |
| پین 104 | MII_TXD3 — MII transmit data 3 |
| پین 105 | VSS — Digital ground |
| پین 106 | VDDA — Analog supply voltage (3.3 V) for EMAC PLL |
| پین 107 | MII_RXCLK — MII receive clock |
| پین 108 | MII_RXDV — MII receive data valid |
| پین 109 | MII_RXD0 — MII receive data 0 |
| پین 110 | MII_RXD1 — MII receive data 1 |
| پین 111 | MII_RXD2 — MII receive data 2 |
| پین 112 | MII_RXD3 — MII receive data 3 |
| پین 113 | MII_CRS — MII carrier sense |
| پین 114 | MII_COL — MII collision detect |
| پین 115 | VSS — Digital ground |
| پین 116 | VDDA — Analog supply voltage (3.3 V) for EMAC PLL |
| پین 117 | USB_DP — USB D+ data line |
| پین 118 | USB_DM — USB D- data line |
| پین 119 | USB_VBUS — USB VBUS sense input |
| پین 120 | UART0_TX — UART0 transmit output |
| پین 121 | UART0_RX — UART0 receive input |
| پین 122 | UART1_TX — UART1 transmit output / IrDA SIR |
| پین 123 | UART1_RX — UART1 receive input / IrDA SIR |
| پین 124 | VSS — Digital ground |
| پین 125 | VDD — Digital supply voltage (3.3 V) |
| پین 126 | SPI_CLK — SPI clock output |
| پین 127 | SPI_MOSI — SPI master-out / slave-in |
| پین 128 | SPI_MISO — SPI master-in / slave-out |
| پین 129 | SPI_SS — SPI slave select |
| پین 130 | I2C_SCL — I2C clock line |
| پین 131 | I2C_SDA — I2C data line |
| پین 132 | VSS — Digital ground |
| پین 133 | VDD — Digital supply voltage (3.3 V) |
| پین 134 | TIMER0 — 16-bit timer 0 input/output |
| پین 135 | TIMER1 — 16-bit timer 1 input/output |
| پین 136 | TIMER2 — 16-bit timer 2 input/output |
| پین 137 | TIMER3 — 16-bit timer 3 input/output |
| پین 138 | WDT — Watchdog timer output / external reset |
| پین 139 | PE0 — GPIO Port E bit 0 |
| پین 140 | PE1 — GPIO Port E bit 1 |
| پین 141 | PE2 — GPIO Port E bit 2 |
| پین 142 | PE3 — GPIO Port E bit 3 |
| پین 143 | TEST — Test mode pin (tie to VSS in normal operation) |
| پین 144 | TRST — JTAG test reset (tie to VSS if JTAG unused) |
کاربردهای معمول
EZ80F91AZ050SG مناسب است برای 6 کاربردs: Industrial Ethernet Node / Modbus TCP Gateway, Point-of-Sale (POS) Terminal Controller, Security and Access Control Panel, Embedded Communication Router / Protocol Bridge, Legacy Z80 / HD64180 System Upgrade, Industrial Data Logger.
Industrial Ethernet Node / Modbus TCP Gateway
The EZ80F91AZ050SG's integrated 10/100 Mbps Ethernet MAC with MII/RMII interface and multi-channel DMA make it a natural fit for industrial Ethernet nodes. The on-chip EMAC removes the need for an external MAC controller, allowing direct connection to a low-cost industrial PHY such as the IP101GR or DP83848, while the DMA engine handles packet buffering without CPU overhead. Real-world designs use the part for Modbus TCP, EtherNet/IP, and PROFINET slave gateways where deterministic interrupt latency and Z80-style register-level control matter more than raw CPU MHz.
پیشنهادی
Point-of-Sale (POS) Terminal Controller
The EZ80F91AZ050SG's combination of USB 2.0 full-speed function, two UARTs (one with IrDA), SPI for magnetic-stripe or smart-card readers, and 32 GPIO for keypad/scanner interfacing fits the legacy POS terminal architecture. Its 256 KB flash comfortably holds the Z80 RTOS plus application firmware, while 16 KB SRAM handles transaction buffering. Designs use the part as the main controller in countertop POS terminals where Z80 code from prior-generation Z80/HD64180 designs is reused to shorten time-to-market.
پیشنهادی
Security and Access Control Panel
For access-control panels and security alarm concentrators, the EZ80F91AZ050SG delivers the right balance of connectivity (10/100 EMAC for backhaul, UART for legacy keypads, GPIO for reed-switch and PIR sensor inputs) and deterministic Z80-style interrupt handling for fail-safe response. The 24-bit external memory bus supports up to 16 MB of external SRAM or NOR flash for event-log buffering, and the on-chip watchdog timer satisfies the fail-safe self-test requirements common in security certifications. Compared with ARM Cortex-M0 alternatives, the Z80 heritage shortens certification paths for designs that already ship Zilog firmware.
پیشنهادی
Embedded Communication Router / Protocol Bridge
The EZ80F91AZ050SG is widely used as the host CPU in embedded protocol bridges that translate between legacy serial protocols (RS-232/422/485, IrDA) and 10/100 Ethernet. Its two UARTs, SPI, I2C, USB, and EMAC cover nearly every serial-to-Ethernet combination without an external protocol converter IC. The multi-channel DMA offloads Ethernet frame handling while the Z80 core runs the protocol stack, and the 144-LQFP 20x20 mm package exposes the full external memory bus for large routing tables or firmware-over-the-air staging buffers.
پیشنهادی
Legacy Z80 / HD64180 System Upgrade
One of the EZ80F91AZ050SG's strongest design wins is as a drop-in upgrade for legacy Z80 and HD64180 systems. Object-code compatibility means existing Z80 firmware, RTOS kernels, and assembler libraries port with minimal change, while the 24-bit linear address mode (up to 16 MB) breaks the original Z80's 64 KB ceiling. The 144-LQFP package and 3.3 V supply simplify board-level migration from 5 V Z80 designs when paired with level translators, and the same peripheral register style reduces firmware-engineering retraining costs.
پیشنهادی
Industrial Data Logger
With 256 KB flash for firmware plus an external memory bus supporting up to 16 MB of NOR flash or SRAM, the EZ80F91AZ050SG is well suited to industrial data loggers that record sensor data over Ethernet, USB, or serial. The on-chip RTC support via I2C, four 16-bit timers for sample-rate generation, and watchdog timer for unattended operation allow designs to run for years without service. The Z80 deterministic interrupt model keeps sample jitter low - critical for vibration or power-quality logging where timestamp accuracy affects downstream analysis.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای EZ80F91AZ050SG — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | EZ80F91AZ050EG | EZ80F92AZ050EG | EZ80F91GAZ0CEG |
|---|---|---|---|---|
| Package | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same |
| Brand | Zilog | Zilog | Zilog | Zilog |
| Core / Architecture | eZ80 8-bit, 50 MHz | eZ80 8-bit, 50 MHz | eZ80 8-bit, 50 MHz | eZ80 8-bit, 50 MHz |
| Flash Memory | 256 KB | 256 KB | 128 KB (-50%) | 256 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB |
| Ethernet MAC | 10/100 EMAC, MII/RMII | 10/100 EMAC, MII/RMII | 10/100 EMAC, MII/RMII | 10/100 EMAC, MII/RMII |
| External Memory Space | 16 MB (24-bit) | 16 MB (24-bit) | 16 MB (24-bit) | 16 MB (24-bit) |
| Lead-Free / RoHS | Yes (matte-tin, SG suffix) | Yes (matte-tin, EG suffix) | Yes (EG suffix) | Yes (EG suffix) |
تفاوت‌های کلیدی
- Integrated 10/100 Ethernet MAC with MII/RMII in 144-LQFP (در مقابلEZ80F92AZ050EG)
- Z80 object-code compatibility for legacy firmware reuse (در مقابلARM Cortex-M0 MCU)
- 24-bit linear address space up to 16 MB external memory (در مقابلClassic Z80 (64 KB limit))
یادداشت‌های طراحی
The EZ80F91AZ050SG requires 3.0 V to 3.6 V on both VDD (digital) and VDDA (analog EMAC PLL) pins; each pin pair must have its own 100 nF + 10 uF decoupling network placed within 5 mm of the pin per the Zilog product specification (PS0192). Bulk 47 uF tantalum plus 0.1 uF ceramic on each rail is recommended for designs that drive USB or Ethernet simultaneously. A common mistake is leaving VDDA unfiltered - this manifests as EMAC link flapping at 100 Mbps even when basic CPU code executes correctly.
Mount the 144-LQFP on a 4-layer PCB with a continuous ground plane directly under the package and a 3.3 V power plane on the next layer up; route the external memory bus (A0-A23, D0-D7, RD, WR, CS0-CS3) on the top layer with matched lengths to keep skew below 1 ns at 50 MHz. Place a 4.7 kohm pull-up on RESET and a 1 Mohm pull-up on NMI as recommended in the Zilog PS0192 reference schematic; leave the TEST and TRST pins tied to VSS through 10 kohm resistors for normal operation.
Estimated: when migrating from a 5 V Z80 or HD64180 design, level-shifters (e.g., SN74LVC4245A on the bus, dedicated 3.3 V PHY for Ethernet) are required because the eZ80F91 is a 3.3 V part; do not assume 5 V tolerance on I/O pins. Also, when porting legacy Z80 assembly, verify the address-mode register (ADSR) setting - code compiled for 64 KB Z80 compatibility will silently wrap in 24-bit mode and vice versa. Finally, the EMAC MII and RMII modes share pins - selecting RMII in firmware frees GPIO but disables MII-specific signals, which can confuse board bring-up if both PHYs are stuffed.
اطلاعات انطباق
RoHS compliant matte-tin finish per Zilog product page; SG suffix denotes a specific Zilog lead-free production callout (the EG suffix is the equivalent RoHS designation recommended for new designs). AEC-Q100 is not applicable to this commercial/industrial grade MCU.
