ICS570AT - 170MHz Spread Spectrum Clock | Renesas
MPN: ICS570AT ✓ فعالICS570AT نمای کلی
A zero-delay buffer is an integrated timing device that compensates for the propagation delay introduced by clock fanout networks. By placing the buffer close to the load or in the fanout path, the device helps preserve edge alignment between clock outputs. The ICS570AT integrates this clock-distribution role with analog/digital phase-locked-loop technology, a technique also used in multiplier-based clocking solutions.
The principal documented characteristics of the ICS570AT are its 170 MHz operating class, spread-spectrum clock-generator function, zero-delay-buffer function, fanout-distribution capability, and 8-SOIC surface-mount package. These characteristics place it in the clock and timing hierarchy between a single reference oscillator and the multiple clock domains required by processors, converters, transceivers, and memory interfaces.
The ICS570AT is useful when a board requires more than a passive clock fanout buffer. Passive fanout devices introduce insertion delay and may not compensate for load-dependent skew, while the integrated PLL-based architecture in the ICS570AT is intended to regenerate and distribute a clock with phase adjustment. The spread-spectrum feature adds another design tool for systems where reducing concentrated spectral peaks is a priority.
Typical uses include audio and network interface clocking, digital signal processing subsystems, data-conversion equipment, communications modules, and industrial control boards. In these systems, the device can drive downstream clock-consuming circuits from a shared reference while keeping clock edges aligned across multiple branches.
When laying out a design around the ICS570AT, follow the pin-description table and recommended decoupling network in the Renesas 570 datasheet. Keep the clock output traces short, use controlled-impedance routing, and avoid placing noisy switching nodes beneath the device. Confirm the selected spread-spectrum profile, output count, and timing budget against the system requirement before releasing the layout.
This page combines the manufacturer datasheet information with package-level guidance, application context, comparison parameters, and practical layout considerations. It is intended to help engineers evaluate the ICS570AT as a drop-in clock-distribution choice and to identify the checks required before substituting another PLL or zero-delay-buffer device.
جایگزینهای drop-in برای ICS570AT — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
570ALFT
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ICS570BLT
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
ICS570CLT
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
ICS570ELT
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
ICS570FLT
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
ICS570AT مشخصات
| Manufacturer | Renesas Electronics Corporation |
| Device Type | Fanout distribution, spread spectrum clock generator, zero delay buffer |
| حداکثر فرکانس کلاک | 170 MHz |
| Clock Architecture | Multiplier and zero-delay buffer |
| PLL Technique | Proprietary analog/digital phase-locked loop |
| Spread Spectrum Modulation | Spread spectrum clock generation |
| بستهبندی | 8-SOIC, 0.154 inch body width, 3.90 mm width |
| نوع نصب | Surface mount |
| تعداد پایه | 8 pins |
راهنمای پیکربندی پین ICS570AT 8-soic, 0.154 inch body width, 3.90 mm width
پیکربندی پین برای ICS570AT (پکیج 8-soic, 0.154 inch body width, 3.90 mm width). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای ICS570AT.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ICS570AT مناسب است برای 6 کاربردs: Audio Codec and Converter Clocking, Network Interface and Data-Converter Clock Trees, Industrial Control and Automation Boards, Communications Module and RF-Front-End Support, Server and Storage Controller Clock Distribution, Test and Measurement Instrumentation.
Audio Codec and Converter Clocking
The ICS570AT fits audio subsystems that require a regenerated clock rather than a passive fanout path. Its documented 170 MHz operating class, zero-delay-buffer function, and spread-spectrum capability provide a clock source for converters, digital audio interfaces, and downstream processing logic. Placing the device near the audio clock loads allows the PLL-based architecture to compensate for routing delay and keep branch edges aligned. Spread-spectrum operation can also reduce concentrated narrowband clock energy, which is useful when the audio board must share a dense chassis with switching regulators and high-speed digital circuits.
پیشنهادی
Network Interface and Data-Converter Clock Trees
The ICS570AT is appropriate for communications boards that distribute a common reference to converters, serializers, and interface controllers. A zero-delay buffer can offset the propagation delay introduced by traces, vias, and fanout loads, while the integrated PLL-based approach regenerates the clock instead of simply passing it through. The 170 MHz device class supports high-speed digital subsystems, and spread-spectrum generation offers additional control over clock-related spectral peaks. Engineers should verify the reference ratio, output arrangement, and jitter requirement for the specific Ethernet, storage, or backplane interface being clocked.
پیشنهادی
Industrial Control and Automation Boards
Industrial control boards often distribute one reference clock among processors, transceivers, and data-conversion circuits while also containing switching regulators and motor-control drivers. The ICS570AT's integrated zero-delay buffering helps compensate for clock-branch delay, and its spread-spectrum clock-generator function provides a way to reduce narrowband clock emissions. The 8-SOIC surface-mount package is practical for multilayer control boards where component area is limited. Confirm the industrial temperature requirement and the exact spread-spectrum configuration in the Renesas 570 datasheet before the part is specified for a deployed control platform.
پیشنهادی
Communications Module and RF-Front-End Support
The ICS570AT can support the digital clock tree beneath a communications module by regenerating and distributing a reference with compensated edge timing. This is useful when a transceiver, converter, and digital processor must operate from related clock phases but are separated by unequal trace lengths. The zero-delay-buffer function addresses delay introduced along those branches, while spread-spectrum operation reduces the concentration of energy at one clock frequency. Because RF systems are sensitive to clock harmonics and spurs, engineers should evaluate the modulation profile and output spectrum together with the module's own emissions requirements.
پیشنهادی
Server and Storage Controller Clock Distribution
Server and storage designs need multiple clock branches to remain synchronized across processors, memory interfaces, and data converters. The ICS570AT can serve as a regenerating fanout and zero-delay element when a board requires more control than a passive buffer offers. Its 170 MHz operating class and spread-spectrum-generation capability make it relevant to high-speed digital subsystems, while the compact 8-SOIC package simplifies routing between clock sources and loads. Deployment in server-class equipment still requires verification of the reference ratio, jitter budget, temperature grade, and system-level clock architecture.
پیشنهادی
Test and Measurement Instrumentation
Precision instrumentation can benefit from a regenerated clock when multiple converters and digital processors must sample from related timing phases. The ICS570AT integrates clock generation, fanout distribution, and zero-delay compensation, allowing unequal routing delays to be compensated more effectively than with passive fanout. Spread-spectrum operation may also be useful in compact instruments that must meet strict emissions limits. For measurement accuracy, the engineer must still check the device's jitter, reference-input range, output skew, and isolation requirements against the acquisition system's timing budget.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای ICS570AT — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | 570ALFT | ICS570BLT | ICS570CLT | ICS570ELT | ICS570FLT |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | SOIC-8 | SOIC-8 - same package | SOIC-8 - same package | SOIC-8 - same package | SOIC-8 - same package | SOIC-8 - same package |
| Device Function | Fanout distribution, spread-spectrum clock generator, zero delay buffer | PLL-based clock driver | 570-series clock generation and distribution | 570-series clock generation and distribution | 570-series clock generation and distribution | 570-series clock generation and distribution |
| Zero-Delay Buffer Function | Yes | PLL-based clock driver with zero-delay capability | 570-series zero-delay clock function | 570-series zero-delay clock function | 570-series zero-delay clock function | 570-series zero-delay clock function |
| PLL Architecture | Proprietary analog/digital PLL | PLL-based | 570-series PLL-based architecture | 570-series PLL-based architecture | 570-series PLL-based architecture | 570-series PLL-based architecture |
تفاوتهای کلیدی
- Combines clock generation, fanout, and zero-delay compensation in one device (در مقابل570ALFT)
- Documented 170 MHz operating class (در مقابلICS570BLT)
- Compact 8-SOIC implementation for mixed clock-tree functions (در مقابل570ALFT)
یادداشتهای طراحی
Follow the Renesas 570 datasheet reference layout for bypass capacitors and place them immediately beside the relevant supply and ground pins. Route clock outputs as short, controlled-impedance traces and avoid stubs or test-probe connections on sensitive edges. A solid ground plane beneath the device reduces return-path discontinuities and helps maintain predictable clock-edge timing.
Treat the reference input as a high-quality clock signal rather than an ordinary logic input. Use a short source path, keep the PLL loop in close proximity to the device, and avoid routing the reference beneath noisy digital or power-converter traces. Confirm the configured operating point and allowable input slew before relying on stable phase lock across temperature and supply variations.
Do not select a 570-series replacement from the package marking alone. The output arrangement, spread-spectrum profile, reference ratio, feedback arrangement, and electrical limits must be compared between the original and replacement datasheets. A same-package part can still require schematic changes if its reference, feedback, or enable connections differ from those of the ICS570AT.
Spread-spectrum clocking can broaden the fundamental clock energy, but it does not remove harmonics or unrelated board noise. Evaluate both the configured modulation profile and the measured output spectrum with the final clock loads and PCB in place. Keep switching-regulator loops and high-di/dt nets away from the clock outputs to avoid adding modulation products to the spread clock spectrum.
اطلاعات انطباق
The available product information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Check the Renesas 570 datasheet and the current manufacturer material-declaration records before environmental or automotive qualification.