ICS663MT - 120MHz CMOS PLL | Renesas | Clock & Timing
MPN: ICS663MT ✓ فعالICS663MT نمای کلی
A phase-locked loop is a feedback-controlled timing circuit that locks a voltage-controlled oscillator to a reference clock. In the broader semiconductor hierarchy, the ICS663MT belongs to the clock and timing IC family, where PLL building blocks synchronize oscillators, regenerate or distribute clock signals, and reduce timing differences between related circuit domains. The ICS663MT specifically provides the phase-detection and feedback functions needed to establish a stable relationship between an input clock and its generated output.
The principal documented characteristics are a 120 MHz maximum frequency, one PLL circuit, a 1:1 input-to-output ratio, CMOS output signaling, and no differential input or differential output. These specifications make the ICS663MT relevant to designs requiring a single-ended clock relationship, including communications equipment, clock-distribution modules, frequency-standard interfaces, and legacy digital systems. The 8-SOIC outline supports conventional surface-mount assembly, although final board compatibility must be confirmed against the exact pin configuration.
Technically, the PLL architecture compares the incoming clock with a feedback signal, drives the charge pump from the phase-error information, and adjusts the voltage-controlled oscillator until the loop approaches lock. The external components and loop-filter requirements should therefore be taken directly from the manufacturer datasheet. Because the available device summary does not state the complete input-frequency range, lock range, jitter, supply voltage, or operating-temperature limits, those characteristics should not be inferred from the 120 MHz headline value.
Typical clock-synchronization uses include recovering a coherent timing relationship in communications equipment, distributing a system reference to one internal clock domain, and supporting laboratory or industrial timing modules. The non-differential interface is particularly useful where the source and destination use single-ended CMOS clocks. Conversely, systems requiring differential clock I/O, programmable multiplication, fractional synthesis, or a known higher-ratio architecture need a different PLL family.
Before layout, confirm the pin names, exposed connections, supply requirements, and recommended loop filter in the manufacturer datasheet. Place the PLL close to the clock source and sensitive clock-consuming circuitry, route outputs as short as practical, and maintain a continuous ground reference. Avoid introducing long stubs or uncontrolled impedance discontinuities into clock traces because they can degrade edge quality and timing margin even when the nominal operating frequency is acceptable.
This product page consolidates the documented architecture, operating frequency, ratio, interface type, package outline, design guidance, and sourcing workflow for engineers evaluating the ICS663MT. It also distinguishes confirmed characteristics from parameters that require confirmation during component review, helping teams assess fit, board compatibility, and supply continuity before committing to a production design.
جایگزینهای drop-in برای ICS663MT — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
هیچ جایگزین مستقیمی برای این محصول موجود نیست.
درخواست جایگزینICS663MT مشخصات
| Product Type | PLL building block |
| PLL | Yes |
| Maximum Frequency | 120 MHz |
| Number of Circuits | 1 |
| Input Type | Clock |
| نوع خروجی | CMOS |
| Input-to-Output Ratio | 1:1 |
| Differential Input | No |
| Differential Output | No |
| Integrated Phase Detector | Yes |
| Integrated Charge Pump | Yes |
| Integrated VCO | Yes |
| Integrated Output Buffer | Yes |
| بستهبندی | 8-SOIC, 0.154 inch body width, 3.90 mm width |
| نوع نصب | Surface mount |
راهنمای پیکربندی پین ICS663MT 8-soic, 0.154 inch body width, 3.90 mm width
پیکربندی پین برای ICS663MT (پکیج 8-soic, 0.154 inch body width, 3.90 mm width). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای ICS663MT.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ICS663MT مناسب است برای 6 کاربردs: Communications Clock Synchronization, Clock Regeneration Systems, Industrial Timing Modules, Instrumentation Reference Clocks, Data Communication Clock Distribution, Test and Measurement Clocking.
Communications Clock Synchronization
The ICS663MT fits legacy single-ended clock synchronization paths that require a PLL feedback function and a documented operating ceiling of 120 MHz. Its phase detector, charge pump, VCO, and output buffer are integrated into one 8-SOIC device, reducing the number of discrete timing blocks around a synchronizer. The stated 1:1 input-to-output ratio suits architectures that preserve the source clock relationship rather than deliberately multiplying or dividing it. Before implementation, verify the reference frequency, supply limits, lock range, and loop-filter values in the complete datasheet. The circuit should also preserve a continuous ground reference and short clock traces to minimize edge degradation.
Clock Regeneration Systems
A clock-regeneration subsystem can use the ICS663MT when a received or distributed reference clock must be compared with a feedback signal and locked into a stable output. The integrated PLL building blocks support the basic phase-comparison and correction loop, while the CMOS output provides a single-ended interface for downstream logic. The 120 MHz maximum frequency makes it relevant to legacy and moderate-speed timing architectures. Designers should calculate loop bandwidth and jitter from the specified operating conditions, preserve the recommended external compensation network, and confirm that the reference and feedback signals meet amplitude and slew requirements.
Industrial Timing Modules
The ICS663MT is applicable to compact industrial timing modules that need a phase-locked loop with a single-ended CMOS clock interface. Its 8-SOIC outline is convenient for conventional surface-mount assembly, and the integrated VCO and output buffer reduce the component count of a discrete timing block. Because the device is not documented as differential or programmable, the target system must accept a 1:1 relationship and single-ended signaling. Validate operation across the complete environmental temperature range and at the maximum line rate used by the module. Follow the datasheet loop-filter and grounding recommendations, and keep sensitive clock routing away from high-current switching paths.
Instrumentation Reference Clocks
The ICS663MT can support a legacy instrumentation reference-clock path where a local oscillator must remain phase-related to an external reference. Its integrated phase detector and feedback functions make it useful for synchronization rather than free-running frequency generation, while the CMOS output can feed compatible counters and timing logic. The 120 MHz ceiling and 1:1 ratio should be checked against every clock domain in the instrument. Because jitter and lock-range details are not stated in the product summary, those values must be confirmed from the manufacturer datasheet before setting measurement-uncertainty or instrument-timing budgets.
Data Communication Clock Distribution
The ICS663MT may be used in data-communication equipment that distributes a coherent single-ended clock from a common reference. A 1:1 PLL relationship helps maintain phase alignment between the source and regenerated clock, and the integrated output buffer provides a direct output stage for compatible CMOS loads. The 8-SOIC package fits established boards designed around a non-differential PLL. Verify output rise and fall times, load capacitance, duty-cycle distortion, and timing jitter at the system operating condition. Use controlled impedance routing, avoid long test pads, and place decoupling close to the supply pins according to the device recommendations.
Test and Measurement Clocking
The ICS663MT is suitable for test and measurement modules that require a feedback-locked clock rather than an independent free-running oscillator. Its single PLL circuit, 120 MHz maximum frequency, and CMOS output can support timing alignment, trigger sequencing, or clock regeneration in legacy systems. The design must tolerate the non-differential interface and fixed 1:1 ratio. Before committing to a board revision, confirm supply-voltage tolerance, lock-acquisition behavior, output-jitter contribution, and temperature performance from the full datasheet. Keep the feedback loop compact, provide a stable reference ground, and isolate sensitive measurement paths from clock outputs to reduce coupled noise.
دادههای مرجع مهندسی برای ICS663MT — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول |
|---|---|
| Package | 8-SOIC |
| Brand | Renesas Electronics |
| Device Type | PLL building block |
| Maximum Frequency | 120 MHz |
| Number of Circuits | 1 |
| Input-to-Output Ratio | 1:1 |
| Output Type | CMOS |
| Differential Input/Output | No / No |
| Integrated Blocks | Phase detector, charge pump, VCO, and output buffer |
تفاوتهای کلیدی
- Integrated PLL building blocks reduce external timing circuitry (در مقابلNo verified drop-in alternative)
- Single-ended CMOS architecture supports conventional clock interfaces (در مقابلNo verified drop-in alternative)
- Fixed 1:1 relationship simplifies clock-domain alignment (در مقابلNo verified drop-in alternative)
یادداشتهای طراحی
Route the reference clock, feedback path, and PLL output as short, controlled-impedance traces, particularly when the design operates near the documented 120 MHz ceiling. Avoid long stubs and unnecessary test pads that can create reflections. Keep the feedback loop compact and maintain continuous ground references under the device to minimize inductive voltage excursions and timing variation.
Place the input and output bypass capacitors directly beside their corresponding pins and follow the capacitance and voltage requirements in the manufacturer datasheet. Confirm the device's full supply-voltage range before selecting a rail. Estimated: capacitor placement and loop stability cannot be validated from a 120 MHz maximum-frequency statement alone; use the recommended network values and operating conditions during schematic review.
Do not treat the ICS663MT as a programmable multiplier or differential clock device merely because it uses PLL terminology. Its documented input-to-output ratio is 1:1 and its differential input and output functions are absent. Validate lock range, jitter, duty cycle, and loop bandwidth for the actual reference frequency, and verify the exact 8-SOIC pinout before releasing artwork.
Check output edge quality and timing margin at the highest operating frequency and worst-case loading condition. CMOS transitions can become less efficient when heavily loaded, so downstream fanout and capacitance should be evaluated rather than inferred from nominal frequency. Keep sensitive clocks away from switching-node and high-current return paths, and use a proper source termination strategy if reflections appear on the board.
اطلاعات انطباق
No specific RoHS, REACH, halogen-free, lead-free, conflict-minerals, or automotive qualification statement was identified for this legacy PLL building block.