Renesas Electronics

ICS663MT - 120MHz CMOS PLL | Renesas | Clock & Timing

MPN: ICS663MT ✓ 啟用中
8-SOIC, 0.154 inch body width, 3.90 mm width Package 120 MHz Speed
MOQ: 1 |

ICS663MT 概覽

Renesas Electronics ICS663MT is a low-cost phase-locked-loop clock synthesis and synchronization building block with a maximum operating frequency of 120 MHz, one PLL circuit, CMOS output, and an 8-SOIC package. The device integrates a phase detector, charge pump, voltage-controlled oscillator, and output buffer to support clock generation and synchronization functions. Its 1:1 input-to-output ratio identifies it as a non-differential clock PLL rather than a frequency-multiplying synthesizer.

A phase-locked loop is a feedback-controlled timing circuit that locks a voltage-controlled oscillator to a reference clock. In the broader semiconductor hierarchy, the ICS663MT belongs to the clock and timing IC family, where PLL building blocks synchronize oscillators, regenerate or distribute clock signals, and reduce timing differences between related circuit domains. The ICS663MT specifically provides the phase-detection and feedback functions needed to establish a stable relationship between an input clock and its generated output.

The principal documented characteristics are a 120 MHz maximum frequency, one PLL circuit, a 1:1 input-to-output ratio, CMOS output signaling, and no differential input or differential output. These specifications make the ICS663MT relevant to designs requiring a single-ended clock relationship, including communications equipment, clock-distribution modules, frequency-standard interfaces, and legacy digital systems. The 8-SOIC outline supports conventional surface-mount assembly, although final board compatibility must be confirmed against the exact pin configuration.

Technically, the PLL architecture compares the incoming clock with a feedback signal, drives the charge pump from the phase-error information, and adjusts the voltage-controlled oscillator until the loop approaches lock. The external components and loop-filter requirements should therefore be taken directly from the manufacturer datasheet. Because the available device summary does not state the complete input-frequency range, lock range, jitter, supply voltage, or operating-temperature limits, those characteristics should not be inferred from the 120 MHz headline value.

Typical clock-synchronization uses include recovering a coherent timing relationship in communications equipment, distributing a system reference to one internal clock domain, and supporting laboratory or industrial timing modules. The non-differential interface is particularly useful where the source and destination use single-ended CMOS clocks. Conversely, systems requiring differential clock I/O, programmable multiplication, fractional synthesis, or a known higher-ratio architecture need a different PLL family.

Before layout, confirm the pin names, exposed connections, supply requirements, and recommended loop filter in the manufacturer datasheet. Place the PLL close to the clock source and sensitive clock-consuming circuitry, route outputs as short as practical, and maintain a continuous ground reference. Avoid introducing long stubs or uncontrolled impedance discontinuities into clock traces because they can degrade edge quality and timing margin even when the nominal operating frequency is acceptable.

This product page consolidates the documented architecture, operating frequency, ratio, interface type, package outline, design guidance, and sourcing workflow for engineers evaluating the ICS663MT. It also distinguishes confirmed characteristics from parameters that require confirmation during component review, helping teams assess fit, board compatibility, and supply continuity before committing to a production design.

直接替換替代品,適用於 ICS663MT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此產品無可直接替換的替代品。

申請替代品

ICS663MT 規格

Product Type PLL building block
PLL Yes
Maximum Frequency 120 MHz
Number of Circuits 1
Input Type Clock
輸出類型 CMOS
Input-to-Output Ratio 1:1
Differential Input No
Differential Output No
Integrated Phase Detector Yes
Integrated Charge Pump Yes
Integrated VCO Yes
Integrated Output Buffer Yes
封裝 8-SOIC, 0.154 inch body width, 3.90 mm width
安裝類型 Surface mount

ICS663MT 8-soic, 0.154 inch body width, 3.90 mm width 腳位配置指南

ICS663MT(8-soic, 0.154 inch body width, 3.90 mm width 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

ICS663MT 的 8-soic, 0.154 inch body width, 3.90 mm width 封裝腳位圖

無詳細腳位定義資料: ICS663MT.

請參閱 資料表 以查看完整腳位配置。

典型應用

ICS663MT 適用於 6 應用s: Communications Clock Synchronization, Clock Regeneration Systems, Industrial Timing Modules, Instrumentation Reference Clocks, Data Communication Clock Distribution, Test and Measurement Clocking.

🌐

Communications Clock Synchronization

The ICS663MT fits legacy single-ended clock synchronization paths that require a PLL feedback function and a documented operating ceiling of 120 MHz. Its phase detector, charge pump, VCO, and output buffer are integrated into one 8-SOIC device, reducing the number of discrete timing blocks around a synchronizer. The stated 1:1 input-to-output ratio suits architectures that preserve the source clock relationship rather than deliberately multiplying or dividing it. Before implementation, verify the reference frequency, supply limits, lock range, and loop-filter values in the complete datasheet. The circuit should also preserve a continuous ground reference and short clock traces to minimize edge degradation.

🖥️

Clock Regeneration Systems

A clock-regeneration subsystem can use the ICS663MT when a received or distributed reference clock must be compared with a feedback signal and locked into a stable output. The integrated PLL building blocks support the basic phase-comparison and correction loop, while the CMOS output provides a single-ended interface for downstream logic. The 120 MHz maximum frequency makes it relevant to legacy and moderate-speed timing architectures. Designers should calculate loop bandwidth and jitter from the specified operating conditions, preserve the recommended external compensation network, and confirm that the reference and feedback signals meet amplitude and slew requirements.

🏭

Industrial Timing Modules

The ICS663MT is applicable to compact industrial timing modules that need a phase-locked loop with a single-ended CMOS clock interface. Its 8-SOIC outline is convenient for conventional surface-mount assembly, and the integrated VCO and output buffer reduce the component count of a discrete timing block. Because the device is not documented as differential or programmable, the target system must accept a 1:1 relationship and single-ended signaling. Validate operation across the complete environmental temperature range and at the maximum line rate used by the module. Follow the datasheet loop-filter and grounding recommendations, and keep sensitive clock routing away from high-current switching paths.

🔧

Instrumentation Reference Clocks

The ICS663MT can support a legacy instrumentation reference-clock path where a local oscillator must remain phase-related to an external reference. Its integrated phase detector and feedback functions make it useful for synchronization rather than free-running frequency generation, while the CMOS output can feed compatible counters and timing logic. The 120 MHz ceiling and 1:1 ratio should be checked against every clock domain in the instrument. Because jitter and lock-range details are not stated in the product summary, those values must be confirmed from the manufacturer datasheet before setting measurement-uncertainty or instrument-timing budgets.

🌐

Data Communication Clock Distribution

The ICS663MT may be used in data-communication equipment that distributes a coherent single-ended clock from a common reference. A 1:1 PLL relationship helps maintain phase alignment between the source and regenerated clock, and the integrated output buffer provides a direct output stage for compatible CMOS loads. The 8-SOIC package fits established boards designed around a non-differential PLL. Verify output rise and fall times, load capacitance, duty-cycle distortion, and timing jitter at the system operating condition. Use controlled impedance routing, avoid long test pads, and place decoupling close to the supply pins according to the device recommendations.

🔧

Test and Measurement Clocking

The ICS663MT is suitable for test and measurement modules that require a feedback-locked clock rather than an independent free-running oscillator. Its single PLL circuit, 120 MHz maximum frequency, and CMOS output can support timing alignment, trigger sequencing, or clock regeneration in legacy systems. The design must tolerate the non-differential interface and fixed 1:1 ratio. Before committing to a board revision, confirm supply-voltage tolerance, lock-acquisition behavior, output-jitter contribution, and temperature performance from the full datasheet. Keep the feedback loop compact, provide a stable reference ground, and isolate sensitive measurement paths from clock outputs to reduce coupled noise.

What is the ICS663MT?
The ICS663MT is a low-cost phase-locked-loop building block designed for clock synthesis and synchronization. According to the manufacturer datasheet description, it integrates a phase detector, charge pump, voltage-controlled oscillator, and output buffer. The device uses single-ended clock signaling, produces a CMOS output, and is specified for operation up to 120 MHz in an 8-SOIC package.
What is the maximum frequency of the ICS663MT?
The ICS663MT has a documented maximum frequency of 120 MHz. This value describes the highest stated operating point for the PLL building block and should not be interpreted as permission to exceed that frequency without checking the complete operating limits. The device-specific datasheet should be consulted for input range, lock range, supply conditions, jitter, and temperature boundaries before final timing validation.
Is the ICS663MT a frequency multiplier?
The ICS663MT has a documented input-to-output ratio of 1:1, so it is not identified as a programmable frequency multiplier in the device specification. Its PLL architecture is intended for clock synthesis and synchronization while preserving the stated one-to-one relationship. If multiplication, division, fractional synthesis, or programmable feedback ratios are required, select a PLL with those functions rather than assuming they are present.
What is the pinout of the ICS663MT?
The ICS663MT is housed in an 8-SOIC package, and a public datasheet listing includes a pinout section. The exact numbered pin names and any no-connect or test assignments must be taken from the device pin-description table before PCB routing. Use the package drawing and pin table together so that orientation, exposed connections, supply pins, and ground pins are assigned consistently.
Where can I download the ICS663MT datasheet PDF?
The ICS663MT datasheet can be located through the device-specific PDF listings on AllDataSheet and DatasheetQ, while Octopart provides a separate datasheet landing page for the Renesas part. Compare the document header and pinout before relying on a mirrored copy, especially for legacy IDT-origin documentation. Confirm the package code, revision, ordering information, and electrical limits against the exact ICS663MT variant.
What does ICS663MT stand for?
ICS663MT is the ordering code for a Renesas Electronics PLL building block originally associated with Integrated Circuit Systems and IDT. The suffix identifies the specific ordering or package configuration, while the device function is a clock phase-locked loop. Always pair the MPN with its complete package and pin description because related PLL families may use similar numerical identifiers.
Can the ICS663MT provide differential clock outputs?
No differential clock output is documented for the ICS663MT. Its output is identified as CMOS, and both differential input and differential output fields are marked as not supported. The device is therefore appropriate for single-ended clock designs. A differential clock requirement should be routed to a PLL with explicit differential I/O and suitable impedance-defined outputs.
When should I choose the ICS663MT for a clock design?
Choose the ICS663MT when a design needs a single PLL circuit, a single-ended CMOS clock path, a 1:1 input-to-output relationship, and operation up to 120 MHz in an 8-SOIC package. It is a sensible candidate for legacy synchronization or clock-distribution subsystems. Avoid it when the system requires programmable multiplication, differential I/O, fractional frequency synthesis, or a supply range outside the device limits.
Is the ICS663MT suitable for communications clock synchronization?
The ICS663MT is suitable for communications clock synchronization when the design uses single-ended CMOS clocks and the required frequency falls within the documented operating range. Its integrated phase detector, charge pump, VCO, and output buffer provide the fundamental PLL building blocks. The system designer must still verify lock range, jitter, supply voltage, and loop-filter requirements from the complete datasheet.
What is the best drop-in replacement for the ICS663MT?
No verified drop-in replacement is established for the ICS663MT. A valid replacement must match the 8-SOIC footprint and pin assignments while preserving the single-ended 120 MHz PLL architecture, 1:1 ratio, supply requirements, and loop behavior. Use the Request a Quote form on this page for current sourcing assistance, and require manufacturer or distributor confirmation before treating any substitute as a drop-in part.
What can replace the ICS663MT?
The ICS663MT can only be replaced safely after confirming package, pinout, frequency range, PLL ratio, supply voltage, and loop characteristics. No same-footprint substitute has been established from the available cross-reference information. Treat functionally similar PLL ICs as redesign candidates unless their datasheets explicitly demonstrate pin-to-pin compatibility with the 8-SOIC ICS663MT.
ICS663MT versus a modern programmable PLL: which is better?
The ICS663MT is better when a fixed 1:1, single-ended clock relationship and established legacy board compatibility are more important than synthesis flexibility. A modern programmable PLL is better when multiple ratios, fractional operation, differential I/O, low jitter, or digitally controlled calibration are required. The decision should follow interface requirements and timing performance rather than headline frequency alone.
Where can I buy the ICS663MT and check its price?
Use the Request a Quote form on this page to request the ICS663MT price, stock position, minimum order quantity, and current lead time. The structured product data does not contain a qualifying quantity-break listing for the exact MPN, so no unit price or inventory claim should be inferred. Confirm the package suffix and assembly requirements as part of the quotation request.
What is the lead time for the ICS663MT?
The current lead time for the ICS663MT is not stated in the product listing, so it should be requested through the Request a Quote form on this page. Lead time can vary with the exact package suffix, order quantity, lifecycle status, and manufacturing availability. Include your required quantity and target delivery date in the request so procurement can provide a meaningful schedule.
Is the ICS663MT in stock?
The ICS663MT is associated with a current distributor and component-listing presence, but the available information does not explicitly confirm a stock quantity for the exact MPN. Use the Request a Quote form on this page for current availability. When requesting a quotation, specify the 8-SOIC configuration, annual usage, target package form, and whether any factory packaging or traceability documentation is required.
What are the key specifications of ICS663MT that engineers should know?
The key confirmed specifications are a maximum frequency of 120 MHz, one PLL circuit, a 1:1 input-to-output ratio, single-ended CMOS output, no differential input or output, and an 8-SOIC package. The device also integrates the phase detector, charge pump, VCO, and output buffer. Supply voltage, full frequency range, jitter, lock characteristics, and temperature limits require review of the complete manufacturer datasheet.
Are there any Renesas equivalents to the ICS663MT?
No verified Renesas or cross-brand pin-compatible equivalent is established for the ICS663MT. Similar PLL building blocks may differ in feedback architecture, supply voltage, input range, output ratio, pin arrangement, or jitter, so they cannot automatically replace this device. Request a formal cross-reference or manufacturer confirmation, and verify every pin and operating parameter before changing an approved design.

工程參考資料,適用於 ICS663MT — 比較、設計指引及合規資訊。

選型指南

Choose the ICS663MT when the design requires a single-ended CMOS PLL building block, a documented 1:1 input-to-output relationship, and operation up to 120 MHz in an established 8-SOIC design. It is particularly appropriate for legacy communications, instrumentation, industrial timing, and clock-regeneration boards where changing the footprint would be costly. Select a modern programmable PLL instead when the system requires multiple ratios, fractional frequency synthesis, differential I/O, digital calibration, lower jitter, or a current automotive qualification program. Treat the ICS663MT as a fixed-function component and confirm supply voltage, lock range, output timing, and loop-filter requirements in the complete datasheet. Because no pin-compatible substitute has been established, the safest replacement path is an exact MPN procurement or a manufacturer-supported cross-reference rather than a functionally similar PLL selected only by maximum frequency.

與替代品比較

參數 本產品
Package 8-SOIC
Brand Renesas Electronics
Device Type PLL building block
Maximum Frequency 120 MHz
Number of Circuits 1
Input-to-Output Ratio 1:1
Output Type CMOS
Differential Input/Output No / No
Integrated Blocks Phase detector, charge pump, VCO, and output buffer

主要差異化特點

  • Integrated PLL building blocks reduce external timing circuitry (對比No verified drop-in alternative)
  • Single-ended CMOS architecture supports conventional clock interfaces (對比No verified drop-in alternative)
  • Fixed 1:1 relationship simplifies clock-domain alignment (對比No verified drop-in alternative)

設計說明

Route the reference clock, feedback path, and PLL output as short, controlled-impedance traces, particularly when the design operates near the documented 120 MHz ceiling. Avoid long stubs and unnecessary test pads that can create reflections. Keep the feedback loop compact and maintain continuous ground references under the device to minimize inductive voltage excursions and timing variation.

Place the input and output bypass capacitors directly beside their corresponding pins and follow the capacitance and voltage requirements in the manufacturer datasheet. Confirm the device's full supply-voltage range before selecting a rail. Estimated: capacitor placement and loop stability cannot be validated from a 120 MHz maximum-frequency statement alone; use the recommended network values and operating conditions during schematic review.

Do not treat the ICS663MT as a programmable multiplier or differential clock device merely because it uses PLL terminology. Its documented input-to-output ratio is 1:1 and its differential input and output functions are absent. Validate lock range, jitter, duty cycle, and loop bandwidth for the actual reference frequency, and verify the exact 8-SOIC pinout before releasing artwork.

Check output edge quality and timing margin at the highest operating frequency and worst-case loading condition. CMOS transitions can become less efficient when heavily loaded, so downstream fanout and capacitance should be evaluated rather than inferred from nominal frequency. Keep sensitive clocks away from switching-node and high-current return paths, and use a proper source termination strategy if reflections appear on the board.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

No specific RoHS, REACH, halogen-free, lead-free, conflict-minerals, or automotive qualification statement was identified for this legacy PLL building block.

資料驗證日期: 2026-11-11 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

ICS663MT datasheet ICS663MT datasheet PDF ICS663MT pinout ICS663MT 8-SOIC pinout ICS663MT specifications ICS663MT 120MHz PLL ICS663MT equivalent ICS663MT replacement ICS663MT cross reference ICS663MT price ICS663MT stock Renesas ICS663MT ICS663MT clock synthesizer ICS663MT schematic

相關元件與詞彙

Renesas Electronics ICS663MT Integrated Circuit Systems Integrated Device Technology phase-locked loop PLL clock synthesizer clock synchronizer clock and timing IC phase detector charge pump voltage-controlled oscillator VCO output buffer CMOS output 120 MHz 1:1 input-to-output ratio 8-SOIC SOIC package family surface-mount technology single-ended clock clock distribution clock regeneration
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情