ISL8325IBZ - Dual SPST Analog Switch, 60 Ohm, SOIC-8 | Renesas
MPN: ISL8325IBZ ✓ فعالISL8325IBZ نمای کلی
An analog switch is an electronic semiconductor device that steers signals between circuit paths under digital control. The SPST designation means single-pole, single-throw: each switch has one common terminal and one selectable terminal rather than multiple throw positions. As a dual analog switch, the ISL8325IBZ contains two such elements in one package, allowing paired routing operations while reducing board area and control-component count.
The key documented specifications are two switch circuits, a 1:1 configuration, 60 ohm on-resistance, single-supply operation, low-voltage operation, and an 8-pin SOIC package. The 60 ohm on-resistance identifies the resistance presented by a closed switch path and makes the device suitable for applications where moderate insertion resistance is acceptable. The SOIC-8 package is a surface-mount package suitable for automated assembly and conventional PCB layouts.
The device combines analog signal routing with logic-level control in a compact integrated circuit. Each independent switch can isolate or connect a signal path, supporting multiplexing-style signal selection, source selection, test-point isolation, and straightforward circuit bypassing. Its dual-channel organization allows one control interface to manage related routing functions while keeping the analog paths physically separate.
Typical uses include low-voltage sensor signal switching, data-acquisition input selection, instrumentation signal routing, communication-path isolation, and embedded control systems that need two compact SPST switches. In these applications, the 60 ohm path resistance and single-supply architecture simplify implementation where low-voltage analog signals must be redirected under firmware or logic control.
For PCB design, use the pin-description table in the manufacturer datasheet when assigning control and analog nets. Keep analog traces short, provide a continuous ground reference, and place interface protection close to externally accessible connectors. Confirm the switch state during power-up if a default signal path is required, because the control logic and supply sequencing determine the initial routing condition.
This page combines the manufacturer part identity, verified distributor specifications, package details, replacement guidance, and application-focused design guidance. It also distinguishes true drop-in options from related family members and provides practical considerations for using the ISL8325IBZ in low-voltage switching systems.
جایگزینهای drop-in برای ISL8325IBZ — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای ISL8325IBZ (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Number of Circuits, Switch Configuration.
ISL8325IAZ
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
ISL83485IBZ-T
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ISL8325IBZ حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | Dual SPST analog switch |
| Number of Circuits | 2 circuits |
| Switch Configuration | 1:1 |
| On-Resistance | 60 ohm |
| Supply Type | Single supply |
| Voltage Class | Low voltage |
| بستهبندی | 8-pin SOIC |
| نوع نصب | Surface mount |
| Switch Type | SPST |
| Pole Count | 1 pole per switch |
| Throw Count | 1 throw per switch |
| Signal Routing Ratio | 1:1 |
| Manufacturer | Renesas Electronics Corporation |
راهنمای پیکربندی پین ISL8325IBZ 8-pin soic
پیکربندی پین برای ISL8325IBZ (پکیج 8-pin soic). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای ISL8325IBZ.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ISL8325IBZ مناسب است برای 6 کاربردs: Low-Voltage Sensor Signal Routing, Data-Acquisition Input Selection, Instrumentation Signal Bypass, Communication Path Isolation, Test-Point and Bypass Control, Embedded Control Signal Multiplexing.
Low-Voltage Sensor Signal Routing
The ISL8325IBZ fits sensor-selection circuits that need two independently controlled analog paths in one package. Its dual SPST topology can isolate a sensor from a measurement chain or connect it to a selected destination, while the 60 ohm on-resistance adds a defined series resistance to the signal path. This arrangement is most appropriate for medium-impedance sensors where that resistance does not materially degrade accuracy. The 8-pin SOIC footprint also reduces board area compared with two separate switch packages. Before implementation, verify the sensor signal amplitude, supply voltage, control thresholds, leakage, and bandwidth against the manufacturer electrical characteristics.
پیشنهادی
Data-Acquisition Input Selection
The ISL8325IBZ can select or isolate two low-voltage measurement paths in a compact data-acquisition front end. One SPST channel may connect an active sensor to the converter input while the other provides an alternate or bypass route, with each path controlled independently. The 1:1 configuration preserves the signal architecture without adding an analog multiplexer stage. Because the switch contributes 60 ohm when closed, the input impedance of the measurement chain should be high enough that the resulting attenuation remains acceptable. Use the manufacturer datasheet to confirm leakage, switching time, off-isolation, and operating-temperature requirements.
پیشنهادی
Instrumentation Signal Bypass
The ISL8325IBZ is suitable for instrumentation circuits that require a signal to be connected, bypassed, or isolated under digital control. Its two SPST paths can manage complementary routing functions, such as connecting a source during measurement and disconnecting it during calibration or another operating state. The 60 ohm on-resistance is a relevant consideration when the source impedance is high, because series resistance combines with input impedance and can affect amplitude and response time. The low-voltage, single-supply architecture supports integration with contemporary measurement controllers. Confirm control levels and supply limits in the manufacturer datasheet before connecting external signals.
پیشنهادی
Communication Path Isolation
The ISL8325IBZ can isolate or reconnect low-voltage communication-related paths in equipment where controlled test access or signal routing is required. Its dual SPST structure allows two related paths to be managed independently while remaining in one 8-pin SOIC package. The 60 ohm closed-path resistance is generally suitable for modest-bandwidth, low-impedance routing, but it should be included in termination and signal-integrity calculations for longer traces. Designers should also review capacitance, off-isolation, switching time, and allowable input voltage using the manufacturer data sheet before placing the device next to high-speed or high-energy nodes.
پیشنهادی
Test-Point and Bypass Control
The ISL8325IBZ supports automated test-point routing by connecting or disconnecting low-voltage nodes under controller command. A typical arrangement uses one channel to expose a circuit node to a tester and the other to control a complementary bypass path. This dual-channel organization can reduce the number of discrete switch packages and simplify firmware sequencing. The SPST configuration provides isolation rather than multiway selection, and the 60 ohm path resistance should be considered in continuity measurements and high-impedance test setups. For production reliability, verify the control state during startup and use the manufacturer pin and absolute-maximum guidance for implementation.
پیشنهادی
Embedded Control Signal Multiplexing
The ISL8325IBZ fits embedded systems that must route two auxiliary low-voltage signals around an analog subsystem. Independent SPST control allows firmware to connect, isolate, or bypass each signal without changing the main processor pin plan. The compact 8-pin SOIC package is practical for surface-mount control boards, while the 1:1 routing architecture avoids unnecessary signal conditioning. Care is required when the source has high impedance because the 60 ohm switch resistance can form a meaningful voltage divider with the receiving input. Review supply range, logic thresholds, leakage, and operating-temperature limits before finalizing the control interface.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای ISL8325IBZ — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | ISL8325IAZ | ISL83485IBZ |
|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
تفاوتهای کلیدی
- Two independent SPST paths in one SOIC-8 package (در مقابلISL83485IBZ)
- Defined 60 ohm on-resistance (در مقابلISL8325IAZ)
- Single-supply low-voltage architecture (در مقابلISL83485IBZ)
یادداشتهای طراحی
Treat the closed-switch resistance as part of the signal-path impedance. With a specified 60 ohm on-resistance, a 10 kohm receiver produces an estimated closed-path voltage-divider factor of 10 kohm divided by 10.06 kohm, or about 0.994, before accounting for leakage and switch parasitics. Keep the source impedance sufficiently lower than the receiver input or revise the architecture when amplitude accuracy is critical.
Place the ISL8325IBZ near the two switched nodes and the corresponding control inputs to minimize trace length and parasitic capacitance. Keep the ground-pin connection short and use a continuous ground plane, with analog traces routed away from high-energy switching nodes. Follow the manufacturer package drawing and pin-description table for the exact SOIC-8 footprint, orientation, and land pattern.
Do not treat the ISL8325IBZ and ISL8325IBZ-T as distinct electrical designs without reviewing their order-code details; the principal distinction shown is packaging. Also avoid selecting the ISL83485IBZ solely from its 8-pin SOIC description. Confirm pin functions, supply limits, control thresholds, on-resistance, leakage, bandwidth, and operating-temperature grade before approving any substitute in an existing layout.
Operate the device only within the manufacturer-specified single-supply range and ensure control inputs never exceed the permitted logic and absolute-maximum limits. Decouple the supply pin close to the device with the capacitance recommended in the manufacturer application guidance. If the control controller resets while signals are present, define whether each switched path must remain isolated, connected, or in a known state during startup.
اطلاعات انطباق
The ISL8325IBZ is an analog interface IC rather than an automotive-qualified power device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be confirmed from the current manufacturer product documentation or declaration.