Renesas Electronics

ISL8325IB-T - Dual 60Ω SPST Analog Switch | Renesas Electronics

MPN: ISL8325IB-T ✓ فعال
Single supply Vdss 60 ohm Rds(on) 8-pin SOIC Package
حداقل سفارش: 1 |

ISL8325IB-T نمای کلی

Renesas Electronics ISL8325IB-T is a low-voltage, single-supply, dual SPST analog switch with a 60 Ω on-resistance and an 8-pin SOIC package. The device contains two independently controlled analog switches in a 1:1 signal topology and is designed for single-supply operation from 1.8 V to 12 V. Its surface-mount SOIC package supports compact analog routing in battery-powered and low-voltage electronic systems.

An analog switch is a solid-state semiconductor device that connects or isolates circuit nodes using controlled voltage signals. The SPST configuration provides one normally open or normally closed conduction path, while a dual-switch package can route two independent signals. Within the broader hierarchy, this product is an analog switch IC, interface IC, and discrete-level signal-routing component used to build multiplexers, sample-and-hold paths, and configurable analog front ends.

The key operating characteristics are the dual SPST architecture, 60 Ω nominal on-resistance, 1:1 switch topology, and single-supply range of 1.8 V to 12 V. The -T ordering suffix identifies the tape-and-reel shipping configuration. These characteristics make the ISL8325IB-T appropriate for low-voltage analog signal paths where two channels must be switched without adding a mechanically complex relay.

The ISL8323 through ISL8325 family is designed for precision analog switching in single-supply systems. Renesas describes these devices for battery-powered equipment, where the combination of low-voltage operation and a compact surface-mount package helps conserve board area. Two switches in one package also reduce component count compared with two separate single-switch ICs. Because on-resistance can vary with supply voltage and signal amplitude, the application should verify the datasheet resistance curve against the actual signal range.

Typical uses include battery-powered measurement systems, portable medical or industrial instruments, analog test equipment, signal routing between a sensor and an amplifier, and multiplexed low-voltage data-acquisition systems. In a multiplexed design, separate switches can bring different sensor outputs onto a common amplifier or converter input. The switch-control signals should remain within the logic thresholds specified for the selected supply voltage.

The primary design consideration is ensuring that analog signals never exceed the device's absolute maximum ratings, particularly during power-down or when a control input remains high while the supply collapses. Place the IC close to the signals it routes, keep high-impedance nodes short, and provide a stable supply reference. The manufacturer pin description and electrical characteristics should be used when assigning PCB tracks and logic levels.

This product page combines the device architecture, verified source links, application guidance, pinout status, and engineering-oriented selection information. It also distinguishes the required SOIC footprint from unsupported alternatives, helping designers avoid substitutions that look electrically similar but cannot be mounted pin-to-pin.

جایگزین‌های drop-in برای ISL8325IB-T — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای ISL8325IB-T (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Number of Terminals, On Resistance.

Renesas Electronics
Number of Terminals: 8 terminals
On Resistance: 60 ohms
مقایسه با ISL8325IB-T →

ISL8325IB

✅ جایگزین مستقیم
Renesas Electronics
📦 8-pin SOIC
Dual SPST analog switch · 2 circuits · 1:1 · 60 ohms · Single supply · Low voltage · 8 terminals · SOIC

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ISL8323IB-T

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Renesas Electronics
📦 8-pin SOIC
2 circuits · 2 independent normally open SPST switches · 60 ohm · 5 pC · 9 pF · 100 pA · -85 dB at 1 MHz · 12 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ISL8324IB-T

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Renesas Electronics
📦 8-pin SOIC
Dual SPST analog switch · 2 circuits · 1:1 · 60 ohm · Single supply · Low voltage · 8-SOIC · 8 terminals

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ISL83483IBZ-T

✅ جایگزین مستقیم
📦 8-pin SOIC
Uses the same 8-pin SOIC footprint and dual-analog-switch family; the compared family specification difference is not numerically established

📋 جایگزین مرجع (خارج از کاتالوگ)

ISL83491IBZ

✅ جایگزین مستقیم
📦 8-pin SOIC
Uses the same 8-pin SOIC footprint and dual-analog-switch family; the compared family specification difference is not numerically established

📋 جایگزین مرجع (خارج از کاتالوگ)

ISL8325IB-T حداکثر مقادیر مجاز و مشخصات الکتریکی

Number of Circuits 2 circuits
Switch Configuration Dual SPST
On Resistance 60 ohm
Signal-to-Switch Ratio 1:1
Supply Type Single supply
Minimum Supply Voltage 1.8 V
Maximum Supply Voltage 12 V
بسته‌بندی 8-pin SOIC
نوع نصب Surface mount
Package Shape Rectangular
Temperature Grade Industrial
Number of Terminals 8
Device Type Analog switch IC

راهنمای پیکربندی پین ISL8325IB-T rectangular

پیکربندی پین برای ISL8325IB-T (پکیج rectangular). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج rectangular برای ISL8325IB-T

داده پین‌آوت تفصیلی موجود نیست برای ISL8325IB-T.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ISL8325IB-T مناسب است برای 6 کاربردs: Battery-Powered Measurement Systems, Portable Industrial Sensors, Low-Voltage Data Acquisition, Analog Test Equipment, Portable Medical Instruments, Signal Routing and Multiplexing.

🔋

Battery-Powered Measurement Systems

The ISL8325IB-T fits battery-powered measurement equipment because it supports a single 1.8 V to 12 V supply and combines two independent SPST switches in one 8-pin SOIC. It can route selected sensor or conditioning signals into a shared analog front end while limiting the number of discrete switching packages. Because the control thresholds and switching transients depend on the supply voltage, configure the logic levels and signal amplitudes from the manufacturer electrical characteristics before finalizing the battery operating range.

🏭

Portable Industrial Sensors

The dual SPST topology of the ISL8325IB-T allows two sensor paths to be selected independently in compact industrial sensing equipment. Its 60 Ω nominal on-resistance and 1:1 topology suit low-frequency analog measurement paths, while the 8-pin SOIC package simplifies board assembly. The design should keep switched nodes away from high-impedance amplifiers during transitions and confirm that source signals remain within the device's absolute maximum limits at the lowest battery voltage.

📈

Low-Voltage Data Acquisition

The ISL8325IB-T can provide two selectable analog channels in a low-voltage data-acquisition front end. Each SPST path can connect a different sensor output toward a shared amplifier or converter input, reducing routing complexity while maintaining a compact 8-pin SOIC footprint. Verify switch leakage, charge injection, and off-state behavior against the measurement accuracy and bandwidth requirements, since those numerical characteristics are application-sensitive and should be taken from the manufacturer datasheet.

🧰

Analog Test Equipment

The ISL8325IB-T is appropriate for switching two test signals within compact analog test equipment because the package integrates two SPST switches and supports supplies from 1.8 V to 12 V. The 60 Ω nominal on-resistance provides a defined starting point for loss budgeting, although the complete frequency-dependent resistance must be checked at the signal frequency. Place the switch close to the instrumentation node and use short, shielded routing when measuring small signals.

💊

Portable Medical Instruments

The ISL8325IB-T can route two low-level analog channels in portable medical instrumentation when the interface is designed around its 1.8 V to 12 V single-supply capability. The dual SPST arrangement reduces component count, while the small SOIC package supports compact assemblies. Signal integrity and safety depend on the complete system architecture, so engineers should validate leakage, switching transients, isolation requirements, and control behavior under worst-case operating conditions.

🔧

Signal Routing and Multiplexing

The ISL8325IB-T is useful in simple two-channel analog multiplexing arrangements because each SPST switch independently connects or isolates a signal path. Designers can build selectable sensor inputs, switched test points, or configurable amplifier paths without using a relay. The 60 Ω nominal on-resistance must be included in the signal-path budget, and the control outputs should be driven only when the supply is stable enough to prevent unintended intermediate switch states.

What is the ISL8325IB-T?
The ISL8325IB-T is a dual SPST analog switch IC with a nominal 60 Ω on-resistance, a 1:1 signal-to-switch ratio, and an 8-pin SOIC package. According to the manufacturer datasheet, it belongs to the ISL8323-ISL8325 family of low-voltage, single-supply analog switches. The two independent switches make it useful for routing two low-voltage analog paths in portable, measurement, and test equipment.
What is the operating voltage of ISL8325IB-T?
The ISL8325IB-T operates from a single supply of 1.8 V to 12 V. This range allows the dual analog switches to be used in low-voltage systems built around 1.8 V, 2.5 V, 3.3 V, 5 V, or other compatible rails. According to the manufacturer datasheet, control-input thresholds and absolute maximum ratings should be checked against the actual supply voltage before the logic interface is finalized.
Where can I download the ISL8325IB-T datasheet PDF?
The ISL8325IB-T datasheet can be accessed through the linked datasheet page, which provides the Intersil document for download and viewing. According to the manufacturer datasheet, the document contains the pin description, electrical characteristics, switching behavior, and application information needed for design review. Use the pin-description table when assigning PCB tracks because it defines the authoritative control and signal connections.
Where can I find the ISL8325IB-T pinout?
The ISL8325IB-T pinout is defined by the manufacturer datasheet for the 8-pin SOIC package. Use the datasheet pin-description table and package drawing to identify COM, NO, NC, VCC, ground, and control connections for the selected switch configuration. The pin assignments are not reproduced on this page because the source material does not expose the complete numbered pin table in a directly verifiable form.
What are the key specifications of ISL8325IB-T that engineers should know?
The principal ISL8325IB-T specifications are two SPST circuits, 60 Ω nominal on-resistance, a 1:1 topology, a 1.8 V to 12 V single-supply range, and an 8-pin SOIC package. According to the manufacturer datasheet, the part is intended for low-voltage precision analog switching and battery-powered equipment. Switching time, off leakage, charge injection, and logic thresholds remain design-verification items for the operating conditions.
ISL8325IB-T vs ISL8325IB - which version should I choose?
The ISL8325IB-T is the tape-and-reel ordering form of the ISL8325IB, while both denote the same dual-SPST, 60 Ω, 8-pin SOIC device for board-level interchangeability. The distributor listing describes the -T suffix as the tape-and-reel configuration. Confirm the manufacturer ordering table when substituting between forms so that the package, grade, and shipping method match the assembly process.
Can ISL8325IB-T replace ISL8325IB?
Yes, the ISL8325IB-T can normally replace the ISL8325IB when the required 8-pin SOIC footprint, electrical ratings, and ordering format are compatible. Both identify the same dual-SPST, 60 Ω device, with the -T suffix indicating tape-and-reel packaging. Compare the complete manufacturer ordering information and current lifecycle status before treating either part as an approved alternate in a controlled production design.
What is the best drop-in replacement for ISL8325IB-T?
The closest same-footprint replacement is the ISL8325IB without the -T suffix because it retains the dual-SPST architecture, 60 Ω on-resistance, and 8-pin SOIC package while changing the ordering format. Other ISL832x family members may match the package, but their switching characteristics and configuration must be checked before substitution. Use the manufacturer datasheet pin table and ordering information for final approval.
What can replace ISL8325IB-T?
The ISL8325IB is the most direct replacement candidate because it uses the same 8-pin SOIC package and retains the dual-SPST, 60 Ω switch architecture. The primary difference is the -T tape-and-reel ordering suffix. Before replacing the component, verify control polarity, switch-state configuration, voltage limits, and production packing against the manufacturer ordering table.
Is the ISL8325IB-T suitable for battery-powered instruments?
Yes, the ISL8325IB-T is suitable for many battery-powered instruments because it supports a single supply from 1.8 V to 12 V and is packaged in a compact 8-pin SOIC. According to the manufacturer datasheet, the ISL8323-ISL8325 family targets battery-powered equipment. The system must still control signal amplitude and control-pin levels so that switching transients remain within the device ratings.
When should I choose ISL8325IB-T over a single-switch IC?
Choose the ISL8325IB-T when the design needs two independent SPST paths and board area is valuable. Integrating two switches into one 8-pin SOIC can reduce component count compared with two separate single-switch packages. Choose a single-switch device instead when only one path is required or when a different switch configuration, logic interface, or electrical rating is necessary for the application.
Is the ISL8325IB-T the same as an ISL8324IB-T?
The ISL8325IB-T and ISL8324IB-T belong to the same low-voltage dual-analog-switch family and use a comparable package family, but they are not automatically interchangeable. The suffix identifies different family members, and switch configuration, logic polarity, and electrical characteristics must be compared in the manufacturer datasheet. Do not approve the substitution without checking every numbered pin and the application requirements.
Where to buy ISL8325IB-T online?
Use the Request a Quote form on this page to request the ISL8325IB-T, current availability, and order quantities. The form allows the request to be matched to the required -T tape-and-reel ordering configuration without relying on a stale product-list figure. Share the target quantity, acceptable delivery date, and assembly packaging requirements when requesting the quotation.
What is the price of ISL8325IB-T?
The current commercial terms for the ISL8325IB-T are presented through the Request a Quote form on this page. The form is the appropriate route for a price tied to the exact -T suffix, required quantity, and delivery terms. Include your requested quantity and any traceable lot or date-code requirements so the quotation can be evaluated consistently.
What is the lead time for ISL8325IB-T?
Request the current lead time for the ISL8325IB-T through the Request a Quote form on this page. Lead time can vary with quantity, backorder conditions, packaging, and shipment destination. State the required quantity, production schedule, and tape-and-reel requirements in the request so procurement can return a delivery commitment appropriate to the assembly plan.
Is ISL8325IB-T in stock and suitable for RoHS production?
Use the Request a Quote form on this page to confirm current ISL8325IB-T inventory and request the applicable compliance documentation. The distributor search result indicates that the part is orderable, but it does not establish a fixed stock quantity for this transaction. Confirm the ordering suffix, delivery schedule, and RoHS documentation for the specific production lot before releasing the BOM.

داده‌های مرجع مهندسی برای ISL8325IB-T — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the ISL8325IB-T when a compact design needs two independent SPST paths, a nominal 60 ohm on-resistance, and operation from a single 1.8 V to 12 V supply. Select the ISL8325IB when the same electrical and package configuration is needed but the production ordering format is not the -T tape-and-reel version. Evaluate ISL8323IB-T or ISL8324IB-T only after checking switch configuration, control polarity, and detailed electrical curves because family membership alone does not guarantee equivalence. ISL83483IBZ-T and ISL83491IBZ provide same-footprint alternatives worth reviewing when their exact parameters match the target circuit, but they require the same rigorous pin and characteristic verification. For a new design, prioritize the manufacturer ordering table, absolute maximum ratings, control thresholds, leakage, and charge-injection requirements over a nominal package match.

مقایسه با جایگزین‌ها

پارامتر این محصول ISL8325IB ISL8323IB-T ISL8324IB-T ISL83483IBZ-T ISL83491IBZ
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 8-pin SOIC 8-pin SOIC - same 8-pin SOIC - same 8-pin SOIC - same 8-pin SOIC - same 8-pin SOIC - same
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

تفاوت‌های کلیدی

  • Combines two independent analog switches in one compact package (در مقابلISL8325IB)
  • Supports low-voltage single-supply designs (در مقابلISL8323IB-T)
  • Uses the same 8-pin SOIC footprint as the principal family alternatives (در مقابلISL8324IB-T)

یادداشت‌های طراحی

Do not treat all members of the ISL832x or ISL834xx families as automatically interchangeable. Although the alternatives listed here use the same 8-pin SOIC footprint, switch-state behavior, control polarity, logic thresholds, and detailed electrical limits can vary by family member. Compare every numbered pin and the application-relevant electrical characteristics against the manufacturer datasheet before releasing a substitution to production.

Route the switched analog signals as short, direct traces from the ISL8325IB-T to the nodes they control. Keep the common and switched nodes away from clocks, power inductors, and digital return paths. Use a continuous ground reference, place the supply bypass capacitor close to the device, and observe the manufacturer's layout guidance when the switch sits next to high-impedance amplifier inputs or precision converter references.

Budget for the 60 ohm nominal on-resistance and any frequency-dependent variation when designing dividers, sensor interfaces, or gain stages. Switching capacitance and charge injection can create transient errors on high-impedance nodes, while off-state leakage can disturb high-impedance measurements. Confirm the actual signal bandwidth, source impedance, capacitance, and required accuracy using the manufacturer switching and leakage characteristics.

Apply control signals only after the supply has stabilized. Control transitions while VCC is rising or falling can produce unintended intermediate switch states or transient current. Check the absolute maximum supply and input-voltage limits at every operating condition, and design the logic driver so its high and low levels meet the manufacturer thresholds for the selected supply voltage.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The available product descriptions identify the device as an industrial-grade analog switch but do not explicitly state its RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. Request current compliance documentation through the Request a Quote form.

تاریخ تأیید داده‌ها: 2026-11-10 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ISL8325IB-T datasheet ISL8325IB-T datasheet pdf ISL8325IB-T pinout ISL8325IB-T equivalent ISL8325IB-T replacement ISL8325IB-T cross reference Renesas ISL8325IB-T ISL8325IB-T 8-SOIC ISL8325IB-T 60 ohm ISL8325IB-T dual SPST ISL8325IB-T application circuit ISL8325IB-T vs ISL8325IB ISL8325IB-T price ISL8325IB-T stock

قطعات و اصطلاحات مرتبط

Renesas Electronics Intersil ISL8325IB-T ISL8325IB ISL8323IB-T ISL8324IB-T ISL83483IBZ-T ISL83491IBZ analog switch IC SPST switch dual analog switch interface IC semiconductor single-supply operation on-resistance 60 ohm 1.8 V to 12 V 8-pin SOIC SOIC family surface-mount package battery-powered equipment analog signal routing multiplexing industrial temperature grade
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ