Renesas Electronics

ISL8325IBZ - Dual SPST Analog Switch, 60 Ohm, SOIC-8 | Renesas

부품 번호: ISL8325IBZ ✓ 활성
Single supply Vdss 60 ohm Rds(on) 8-pin SOIC Package
MOQ: 1 |

ISL8325IBZ 개요

The Renesas Electronics ISL8325IBZ is a low-voltage, single-supply, dual SPST analog switch with a 1:1 signal configuration and 60 ohm on-resistance, packaged in an 8-pin SOIC. It provides two independently controlled analog switches for routing low-voltage signals within test, measurement, communication, and control systems. The 1:1 configuration indicates one terminal connected to one common terminal when the corresponding switch is closed.

An analog switch is an electronic semiconductor device that steers signals between circuit paths under digital control. The SPST designation means single-pole, single-throw: each switch has one common terminal and one selectable terminal rather than multiple throw positions. As a dual analog switch, the ISL8325IBZ contains two such elements in one package, allowing paired routing operations while reducing board area and control-component count.

The key documented specifications are two switch circuits, a 1:1 configuration, 60 ohm on-resistance, single-supply operation, low-voltage operation, and an 8-pin SOIC package. The 60 ohm on-resistance identifies the resistance presented by a closed switch path and makes the device suitable for applications where moderate insertion resistance is acceptable. The SOIC-8 package is a surface-mount package suitable for automated assembly and conventional PCB layouts.

The device combines analog signal routing with logic-level control in a compact integrated circuit. Each independent switch can isolate or connect a signal path, supporting multiplexing-style signal selection, source selection, test-point isolation, and straightforward circuit bypassing. Its dual-channel organization allows one control interface to manage related routing functions while keeping the analog paths physically separate.

Typical uses include low-voltage sensor signal switching, data-acquisition input selection, instrumentation signal routing, communication-path isolation, and embedded control systems that need two compact SPST switches. In these applications, the 60 ohm path resistance and single-supply architecture simplify implementation where low-voltage analog signals must be redirected under firmware or logic control.

For PCB design, use the pin-description table in the manufacturer datasheet when assigning control and analog nets. Keep analog traces short, provide a continuous ground reference, and place interface protection close to externally accessible connectors. Confirm the switch state during power-up if a default signal path is required, because the control logic and supply sequencing determine the initial routing condition.

This page combines the manufacturer part identity, verified distributor specifications, package details, replacement guidance, and application-focused design guidance. It also distinguishes true drop-in options from related family members and provides practical considerations for using the ISL8325IBZ in low-voltage switching systems.

드롭인 대체품: ISL8325IBZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ISL8325IBZ (동일 폼 팩터 및 풋프린트) — 차이점: Package, Number of Circuits, Switch Configuration.

Renesas Electronics
Package: 8-SOIC
Number of Circuits: 2
Switch Configuration: Dual SPST
비교 대상: ISL8325IBZ →
Renesas Electronics
Package: 8-SOIC (IB) 3.9 mm
비교 대상: ISL8325IBZ →

ISL8325IAZ

✅ 드롭인 ⚠️ 사양 미검증
📦 8-pin SOIC
Same-family dual SPST architecture and 8-pin SOIC footprint; the I-grade operating limits differ from the B-grade limits by an unquantified manufacturer-defined temperature difference.

📋 참조 대체품 (카탈로그에 없음)

ISL83485IBZ-T

✅ 드롭인
Renesas Electronics
📦 8-pin SOIC
Transceiver · 1/1 · Half · RS-422, RS-485 · 10 Mbps · 3.3 V · 3.0 V to 3.6 V · 1/8 unit-load (up to 256 nodes)

가격 문의

데이터시트 보기 →

ISL8325IBZ 최대 정격 & 전기적 특성

Product Type Dual SPST analog switch
Number of Circuits 2 circuits
Switch Configuration 1:1
On-Resistance 60 ohm
Supply Type Single supply
Voltage Class Low voltage
패키지 8-pin SOIC
실장 유형 Surface mount
Switch Type SPST
Pole Count 1 pole per switch
Throw Count 1 throw per switch
Signal Routing Ratio 1:1
Manufacturer Renesas Electronics Corporation

ISL8325IBZ 8-pin soic 핀 구성 가이드

ISL8325IBZ(8-pin soic 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

ISL8325IBZ의 8-pin soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ISL8325IBZ.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ISL8325IBZ 적합 용도: 6 애플리케이션s: Low-Voltage Sensor Signal Routing, Data-Acquisition Input Selection, Instrumentation Signal Bypass, Communication Path Isolation, Test-Point and Bypass Control, Embedded Control Signal Multiplexing.

🧩

Low-Voltage Sensor Signal Routing

The ISL8325IBZ fits sensor-selection circuits that need two independently controlled analog paths in one package. Its dual SPST topology can isolate a sensor from a measurement chain or connect it to a selected destination, while the 60 ohm on-resistance adds a defined series resistance to the signal path. This arrangement is most appropriate for medium-impedance sensors where that resistance does not materially degrade accuracy. The 8-pin SOIC footprint also reduces board area compared with two separate switch packages. Before implementation, verify the sensor signal amplitude, supply voltage, control thresholds, leakage, and bandwidth against the manufacturer electrical characteristics.

📊

Data-Acquisition Input Selection

The ISL8325IBZ can select or isolate two low-voltage measurement paths in a compact data-acquisition front end. One SPST channel may connect an active sensor to the converter input while the other provides an alternate or bypass route, with each path controlled independently. The 1:1 configuration preserves the signal architecture without adding an analog multiplexer stage. Because the switch contributes 60 ohm when closed, the input impedance of the measurement chain should be high enough that the resulting attenuation remains acceptable. Use the manufacturer datasheet to confirm leakage, switching time, off-isolation, and operating-temperature requirements.

🔧

Instrumentation Signal Bypass

The ISL8325IBZ is suitable for instrumentation circuits that require a signal to be connected, bypassed, or isolated under digital control. Its two SPST paths can manage complementary routing functions, such as connecting a source during measurement and disconnecting it during calibration or another operating state. The 60 ohm on-resistance is a relevant consideration when the source impedance is high, because series resistance combines with input impedance and can affect amplitude and response time. The low-voltage, single-supply architecture supports integration with contemporary measurement controllers. Confirm control levels and supply limits in the manufacturer datasheet before connecting external signals.

🌐

Communication Path Isolation

The ISL8325IBZ can isolate or reconnect low-voltage communication-related paths in equipment where controlled test access or signal routing is required. Its dual SPST structure allows two related paths to be managed independently while remaining in one 8-pin SOIC package. The 60 ohm closed-path resistance is generally suitable for modest-bandwidth, low-impedance routing, but it should be included in termination and signal-integrity calculations for longer traces. Designers should also review capacitance, off-isolation, switching time, and allowable input voltage using the manufacturer data sheet before placing the device next to high-speed or high-energy nodes.

🖥️

Test-Point and Bypass Control

The ISL8325IBZ supports automated test-point routing by connecting or disconnecting low-voltage nodes under controller command. A typical arrangement uses one channel to expose a circuit node to a tester and the other to control a complementary bypass path. This dual-channel organization can reduce the number of discrete switch packages and simplify firmware sequencing. The SPST configuration provides isolation rather than multiway selection, and the 60 ohm path resistance should be considered in continuity measurements and high-impedance test setups. For production reliability, verify the control state during startup and use the manufacturer pin and absolute-maximum guidance for implementation.

🏭

Embedded Control Signal Multiplexing

The ISL8325IBZ fits embedded systems that must route two auxiliary low-voltage signals around an analog subsystem. Independent SPST control allows firmware to connect, isolate, or bypass each signal without changing the main processor pin plan. The compact 8-pin SOIC package is practical for surface-mount control boards, while the 1:1 routing architecture avoids unnecessary signal conditioning. Care is required when the source has high impedance because the 60 ohm switch resistance can form a meaningful voltage divider with the receiving input. Review supply range, logic thresholds, leakage, and operating-temperature limits before finalizing the control interface.

추천 제품 요약

ISL8325IAZ Same-family dual SPST switch 사용처: Low-Voltage Sensor Signal Routing, Data-Acquisition Input Selection, Instrumentation Signal Bypass, Communication Path Isolation, Test-Point and Bypass Control, Embedded Control Signal Multiplexing ISL83485IBZ Renesas 8-pin SOIC analog-switch alternative 사용처: Low-Voltage Sensor Signal Routing, Instrumentation Signal Bypass, Test-Point and Bypass Control ISL8325IBZ-T Same electrical device in a tape-and-reel order code 사용처: Data-Acquisition Input Selection, Communication Path Isolation, Embedded Control Signal Multiplexing
What is the ISL8325IBZ?
The ISL8325IBZ is a Renesas Electronics dual SPST analog switch with two independently controlled 1:1 switch circuits, 60 ohm on-resistance, and an 8-pin SOIC package. It is designed for low-voltage, single-supply signal-routing applications. According to the manufacturer datasheet, the device can bypass, isolate, or select analog signal paths under external logic control.
How many switches does the ISL8325IBZ contain?
The ISL8325IBZ contains two analog switches, and each switch has one common path and one throw path in an SPST configuration. The manufacturer describes the part as a dual SPST device with a 1:1 signal configuration. Both switches are integrated into one 8-pin SOIC package, which can simplify routing layouts compared with two separate single-switch packages.
What is the on-resistance of the ISL8325IBZ?
The ISL8325IBZ has a specified on-resistance of 60 ohm. This value represents the approximate resistance through a closed switch path. According to the manufacturer datasheet, designers should account for this resistance when calculating signal attenuation, especially for high-impedance sensors, precision analog measurement paths, or signal chains operating at relatively high frequencies.
What is the pinout of the ISL8325IBZ?
The ISL8325IBZ uses an 8-pin SOIC footprint, with pin assignments specified in the manufacturer pin-description table. The device contains two SPST analog switches and their associated control and supply connections. Use the package drawing and pin-description table in the manufacturer datasheet when assigning PCB tracks, particularly to distinguish common terminals, throw terminals, control inputs, supply, and ground.
Where can I download the ISL8325IBZ datasheet PDF?
The ISL8325IBZ datasheet is available through the linked datasheet page and describes the low-voltage, single-supply dual SPST architecture, 60 ohm on-resistance, electrical characteristics, and 8-pin SOIC pin assignments. Download the current manufacturer document and confirm its revision before releasing a production design because operating limits, logic thresholds, and recommended application circuits are defined in that document.
Can the ISL8325IBZ replace the ISL8325IBZ-T?
The ISL8325IBZ and ISL8325IBZ-T identify the same 8-pin SOIC device in different orderable packaging configurations. The ISL8325IBZ is listed as an 8-SOIC, and the ISL8325IBZ-T is likewise listed as an 8-SOIC. Confirm the required packing method, reel orientation, moisture-handling requirements, and marking before treating one order code as a procurement replacement for the other.
Is the ISL8325IBZ suitable for low-voltage sensor switching?
The ISL8325IBZ is suitable for low-voltage sensor routing when the source impedance and acceptable insertion loss permit a 60 ohm switch resistance. Its SPST topology can connect or isolate a sensor signal path, while the second channel can handle a complementary routing function. The manufacturer datasheet should be checked for signal-level limits, control thresholds, bandwidth, and off-isolation before selecting it for a precision sensor front end.
What can replace the ISL8325IBZ?
The ISL8325IBZ can be replaced by a pin-compatible 8-pin SOIC dual SPST switch whose logic levels, supply range, on-resistance, bandwidth, leakage, and power ratings satisfy the application. A candidate such as ISL8325IAZ belongs to the same device family, but the temperature grade and control thresholds must be compared before substitution. No substitute should be approved solely because it has two SPST switches.
What is the difference between the ISL8325IBZ and ISL8325IAZ?
The ISL8325IBZ and ISL8325IAZ are related members of the same Renesas dual SPST family and use an 8-pin SOIC package. Their grade-specific operating limits and control thresholds must be checked in the manufacturer documentation before interchange. For an existing PCB, also confirm supply voltage, logic levels, switch timing, leakage, and on-resistance against the original design requirements.
Is the ISL8325IBZ the same as the ISL83485IBZ?
The ISL83485IBZ is not automatically interchangeable with the ISL8325IBZ despite both being identified as 8-pin SOIC analog-switch devices. The ISL83485 family can have different channel counts, on-resistance, logic levels, or supply requirements. Compare the manufacturer pin descriptions and electrical tables before considering it as a drop-in substitute, and prototype the change in the target signal path.
When should I choose the ISL8325IBZ over another dual SPST switch?
Choose the ISL8325IBZ when the design requires two independently controlled 1:1 SPST paths, a 60 ohm on-resistance, low-voltage single-supply operation, and an 8-pin SOIC footprint. Select another device when its lower on-resistance, wider supply range, higher bandwidth, lower leakage, smaller package, or automotive qualification provides a functional benefit. The final choice should be based on the complete electrical and mechanical requirements of the target circuit.
Is the ISL8325IBZ suitable for data-acquisition systems?
The ISL8325IBZ can support signal selection or isolation in low-voltage data-acquisition systems because it provides two controlled 1:1 paths in one 8-pin SOIC package. Its 60 ohm on-resistance may be acceptable for medium-impedance sensors but can influence precision measurements when source impedance is high. Use the manufacturer specifications to evaluate leakage, bandwidth, injection error, and control timing in the selected measurement range.
How should the ISL8325IBZ be laid out on a PCB?
Place the ISL8325IBZ close to the switched signal nodes to minimize trace resistance and susceptibility to interference. Keep analog routing separated from noisy switching nodes, provide a low-impedance ground reference, and place any external input or interface-protection components near the connector. Follow the manufacturer datasheet layout guidance and pin-description table when assigning the eight SOIC pins.
Where can I buy the ISL8325IBZ?
The ISL8325IBZ can be requested through the Request a Quote form on this page. Quote requests should include the exact ISL8325IBZ order code, required quantity, acceptable packaging method, target shipment date, and destination country. Current commercial availability and lead time should be confirmed at request time so the order matches the assembly plan.
What is the lead time for the ISL8325IBZ?
The current lead time for the ISL8325IBZ depends on inventory, packaging, quantity, and the manufacturing schedule. Submit the required quantity and target date through the Request a Quote form on this page. Include any approved alternate sourcing plan or component-shortage requirement so the commercial response can reflect the production schedule.
What are the key specifications of the ISL8325IBZ that engineers should know?
The key ISL8325IBZ specifications are two SPST circuits, a 1:1 routing configuration, 60 ohm on-resistance, single-supply operation, low-voltage operation, and an 8-pin SOIC package. According to the manufacturer datasheet, these features position the device for compact low-voltage signal routing. Designers should additionally verify supply range, control thresholds, leakage, bandwidth, temperature limits, and absolute maximum ratings for the intended circuit.

엔지니어링 참조 데이터: ISL8325IBZ — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the ISL8325IBZ for low-voltage systems that need two independently controlled 1:1 SPST paths, a 60 ohm on-resistance, and an 8-pin SOIC footprint. The ISL8325IAZ is the closest same-family alternative when its manufacturer-defined temperature grade and electrical limits satisfy the design. Consider the ISL83485IBZ only after confirming its pin functions, channel configuration, on-resistance, supply range, and logic levels against the target circuit. A different dual SPST device may be preferable when lower resistance, wider bandwidth, smaller package size, lower leakage, or different qualification requirements dominate the design. For precision sensor or measurement paths, calculate the divider formed by the 60 ohm switch resistance and the receiving input impedance. For external connections, review signal limits and protection requirements before assigning the switch pins.

대체품과의 비교

파라미터 이 제품 ISL8325IAZ ISL83485IBZ
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Renesas Electronics Renesas Electronics Renesas Electronics

주요 차별점

  • Two independent SPST paths in one SOIC-8 package (vs ISL83485IBZ)
  • Defined 60 ohm on-resistance (vs ISL8325IAZ)
  • Single-supply low-voltage architecture (vs ISL83485IBZ)

설계 노트

Treat the closed-switch resistance as part of the signal-path impedance. With a specified 60 ohm on-resistance, a 10 kohm receiver produces an estimated closed-path voltage-divider factor of 10 kohm divided by 10.06 kohm, or about 0.994, before accounting for leakage and switch parasitics. Keep the source impedance sufficiently lower than the receiver input or revise the architecture when amplitude accuracy is critical.

Place the ISL8325IBZ near the two switched nodes and the corresponding control inputs to minimize trace length and parasitic capacitance. Keep the ground-pin connection short and use a continuous ground plane, with analog traces routed away from high-energy switching nodes. Follow the manufacturer package drawing and pin-description table for the exact SOIC-8 footprint, orientation, and land pattern.

Do not treat the ISL8325IBZ and ISL8325IBZ-T as distinct electrical designs without reviewing their order-code details; the principal distinction shown is packaging. Also avoid selecting the ISL83485IBZ solely from its 8-pin SOIC description. Confirm pin functions, supply limits, control thresholds, on-resistance, leakage, bandwidth, and operating-temperature grade before approving any substitute in an existing layout.

Operate the device only within the manufacturer-specified single-supply range and ensure control inputs never exceed the permitted logic and absolute-maximum limits. Decouple the supply pin close to the device with the capacitance recommended in the manufacturer application guidance. If the control controller resets while signals are present, define whether each switched path must remain isolated, connected, or in a known state during startup.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The ISL8325IBZ is an analog interface IC rather than an automotive-qualified power device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be confirmed from the current manufacturer product documentation or declaration.

데이터 검증일: 2026-11-10 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ISL8325IBZ ISL8325IBZ datasheet ISL8325IBZ datasheet pdf ISL8325IBZ pinout ISL8325IBZ schematic ISL8325IBZ equivalent ISL8325IBZ replacement ISL8325IBZ cross reference ISL8325IBZ vs ISL83485IBZ ISL8325IBZ price ISL8325IBZ stock Renesas ISL8325IBZ ISL8325IBZ 60 ohm switch ISL8325IBZ SOIC-8 ISL8325IBZ application circuit

관련 부품 & 용어

Renesas Electronics ISL8325IBZ ISL8325IAZ ISL83485IBZ analog switch SPST single-pole single-throw switch dual analog switch signal routing multiplexing on-resistance 60 ohm single supply low-voltage IC interface IC semiconductor SOIC-8 SOIC package family surface-mount package SMD signal isolation test-point routing sensor interface data acquisition instrumentation
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기