Microchip Technology

LAN8710AI-EZK-ABC - Industrial 10/100 Ethernet PHY | Microchip

MPN: LAN8710AI-EZK-ABC ✓ فعال
Variable I/O voltage Vdss IEEE 802.3-2005 Rds(on) 32-QFN, 5 x 5 mm Package Automatic negotiation Speed
حداقل سفارش: 1 |

LAN8710AI-EZK-ABC نمای کلی

The Microchip Technology LAN8710AI-EZK-ABC is an industrial-temperature 10BASE-T/100BASE-TX Ethernet physical layer transceiver with a variable-voltage digital MII or RMII host interface, HP Auto-MDIX support, and a 32-pin QFN 5 x 5 mm package. It provides the physical-layer functions required to connect an Ethernet MAC to a 10/100BASE-T network while supporting automatic speed and duplex negotiation.

An Ethernet PHY is a semiconductor within the Ethernet interface hierarchy: an Ethernet controller or MAC communicates through a digital bus, while the PHY translates that data into differential copper-pair signaling. The LAN8710AI family supports IEEE 802.3-2005 operation, vendor-specific registers, MII and RMII host interfaces, and direct or crossover cable connections through HP Auto-MDIX. This makes it suitable for embedded equipment that needs 10/100 Ethernet without a four-pair Gigabit Ethernet physical layer.

The principal benefits are its small 32-QFN footprint, flexible MII or RMII connectivity, low-power flexPWR operation, and broad industrial-temperature capability. The AI suffix identifies the industrial option, supporting operation from -40°C to 85°C, while the standard digital host interface can operate with a variable I/O voltage. Auto-negotiation automatically selects the best supported speed and duplex mode, reducing host configuration requirements when connected to either 10BASE-T or 100BASE-TX equipment.

Internally, the PHY separates digital MAC signaling from the analog magnetic-link interface. MII provides separate control, status, transmit, and receive paths, while RMII reduces the number of digital signal lines for applications where a compact host interface is preferred. The exposed-pad QFN construction also supports heat transfer into the PCB rather than relying on a conventional lead-frame package. Because the device handles cable-side signal generation, the magnetics and physical layout around the PHY remain critical to link performance.

Typical implementations include industrial Ethernet gateways, programmable controllers, embedded servers, automation equipment, smart-building controllers, and network-connected sensor platforms. The LAN8710AI-EZK-ABC is especially relevant where an MCU or dedicated Ethernet controller requires a compact 10/100 PHY, industrial temperature support, and compatibility with both MII and RMII implementations.

For PCB design, follow the manufacturer’s pin-description table, exposed-pad land pattern, and recommended magnetic-circuit layout. Place the PHY, magnetics, and high-speed copper pairs close together, provide clean supply and ground connections, and observe the differential trace geometry shown in the application guidance. The key trade-off is that the part supports 10/100BASE-T only, so designs requiring 1000BASE-T operation need a Gigabit Ethernet PHY instead.

This page combines manufacturer specifications, industrial-temperature positioning, interface guidance, and same-footprint alternatives to support component selection, schematic review, and PCB implementation.

جایگزین‌های drop-in برای LAN8710AI-EZK-ABC — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای LAN8710AI-EZK-ABC (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Power Technology, RoHS Status, Host Interface, MAC Interface.

Microchip Technology
Power Technology: Microchip flexPWR
RoHS Status: ROHS3 compliant
MAC Interface: MII and RMII
مقایسه با LAN8710AI-EZK-ABC →
Microchip Technology
Package: 32-QFN, 5 mm x 5 mm
Power Technology: Microchip flexPWR technology
Host Interface: MII and RMII
مقایسه با LAN8710AI-EZK-ABC →
Microchip Technology
Package: 32-SQFN, 5x5 mm
MAC Interface: MII or RMII digital interface
مقایسه با LAN8710AI-EZK-ABC →

LAN8710AI-EZK

✅ جایگزین مستقیم
📦 32-QFN (5x5)
Same 32-QFN footprint and industrial temperature range; order-code assembly form differs by 40°C minimum rating only when compared with commercial LAN8710A options

📋 جایگزین مرجع (خارج از کاتالوگ)

LAN8710AI-EZK-TR-ABC

✅ جایگزین مستقیم
Microchip Technology
📦 32-QFN (5x5)
10BASE-T/100BASE-TX Ethernet physical-layer transceiver · 10 Mb/s and 100 Mb/s · MII or RMII digital interface · 32-SQFN, 5x5 mm · Surface mount · -40°C to 85°C · 10BASE-T and 100BASE-TX · Supported

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LAN8710A-EZK

✅ جایگزین مستقیم
Microchip Technology
📦 32-QFN (5x5)
10/100 Ethernet physical-layer transceiver · 10 Mbps and 100 Mbps · 10BASE-T and 100BASE-TX · MII and RMII · IEEE 802.3-2005 · Full-duplex · HP Auto-MDIX · Auto-negotiation

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LAN8710A-EZC-ABC

✅ جایگزین مستقیم
Microchip Technology
📦 32-QFN (5x5)
10/100 Ethernet physical-layer transceiver · 10 Mbps and 100 Mbps · 10BASE-T and 100BASE-TX · MII or RMII · 4/4 transceiver · Supported · Supported · Microchip flexPWR technology

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LAN8710A-EZC-TR-ABC

✅ جایگزین مستقیم
Microchip Technology
📦 32-QFN (5x5)
10 Mbps and 100 Mbps · IEEE 802.3u · MII and RMII · 10BASE-T and 100BASE-TX, full-duplex · 1.6 V to 3.6 V · 4/4 · 0°C to 85°C · 32-VFQFN with exposed pad

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LAN8710AI-EZK-ABC مشخصات

Ethernet Support 10BASE-T and 100BASE-TX
Maximum Ethernet Data Rate 100 Mbit/s
Host Interface MII or RMII digital interface
MAC Interface Logic Voltage Variable I/O voltage
Cable Polarity Support HP Auto-MDIX
Speed and Duplex Automatic negotiation
Standards Compliance IEEE 802.3-2005
Power Technology flexPWR technology
Industrial Temperature Range -40°C to 85°C
بسته‌بندی 32-QFN, 5 x 5 mm
Package Height 0.9 mm maximum
نوع نصب Surface mount
تعداد پین‌ها 32 pins
Ethernet Magnetics Requirement External magnetic components required
Digital Register Support IEEE 802.3-2005 compliant and vendor-specific registers
وضعیت RoHS Compliant
REACH Status Compliant

راهنمای پیکربندی پین LAN8710AI-EZK-ABC 0.9 mm maximum

پیکربندی پین برای LAN8710AI-EZK-ABC (پکیج 0.9 mm maximum). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 0.9 mm maximum برای LAN8710AI-EZK-ABC

داده پین‌آوت تفصیلی موجود نیست برای LAN8710AI-EZK-ABC.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

LAN8710AI-EZK-ABC مناسب است برای 6 کاربردs: Industrial Ethernet Gateway, Programmable Automation Controller, Smart Building Controller, Embedded Network Appliance, Connected Sensor Platform, Embedded Server or Control Console.

🏭

Industrial Ethernet Gateway

The LAN8710AI-EZK-ABC fits an industrial gateway that connects a host controller to a 10/100BASE-T network. Its MII and RMII interfaces let the designer select the digital bus appropriate for the host processor, while HP Auto-MDIX removes crossover-cable restrictions in field installations. The -40°C to 85°C range supports equipment exposed to temperature variation outside consumer enclosures. Place the PHY and external magnetics close to the Ethernet connector, preserve controlled differential-pair geometry, and provide local decoupling at the supply pins to maintain reliable link performance.

🏭

Programmable Automation Controller

The LAN8710AI-EZK-ABC can provide network connectivity for a programmable automation controller while leaving control and motion functions to the host MCU. Automatic speed and duplex negotiation allows the controller to operate with both 10BASE-T and 100BASE-TX infrastructure without manual link configuration. The industrial temperature rating is valuable in machinery rooms where ambient conditions can exceed the 0°C lower limit of commercial options. The principal design consideration is maintaining separation between sensitive PHY supply, digital interface, and magnetics paths to reduce coupling into control signals.

🧩

Smart Building Controller

A smart-building controller can use the LAN8710AI-EZK-ABC to communicate over a 10/100 Ethernet backbone while operating sensors, relays, and local user interfaces. MII support accommodates controllers using wider parallel host buses, whereas RMII reduces connector count in compact designs. HP Auto-MDIX lets installers use straight-through or crossover wiring, simplifying field commissioning. Because building equipment may sit in unheated cabinets, the -40°C lower operating limit provides useful margin. Firmware should still handle link renegotiation, and the PCB should follow the manufacturer’s magnetic-component placement guidance.

🌐

Embedded Network Appliance

The LAN8710AI-EZK-ABC is useful in compact network appliances that require 10/100 Ethernet but do not need Gigabit throughput. Its 5 x 5 mm QFN package conserves board area, and the choice between MII and RMII supports both legacy parallel-interface hosts and more pin-constrained processors. Automatic negotiation improves interoperability with switches and embedded network equipment operating at 10 or 100 Mbit/s. Designers should reserve solid copper area under the exposed pad, follow the recommended component and magnetic-circuit layout, and validate signal integrity across the full operating-temperature range.

🧩

Connected Sensor Platform

The LAN8710AI-EZK-ABC can add wired Ethernet connectivity to a distributed sensor platform that monitors environmental or equipment data. A 100 Mbit/s link provides sufficient bandwidth for typical telemetry, configuration, and status traffic, while low-power flexPWR technology supports compact embedded equipment. The industrial temperature range makes the device suitable for installations outside controlled office environments. Keep the PHY and magnetics away from high-current switching nodes, observe differential impedance requirements, and verify recovered-clock and power-supply behavior in the final board-level design.

🖥️

Embedded Server or Control Console

The LAN8710AI-EZK-ABC can provide a cost-effective 10/100 network port for an embedded server, maintenance console, or diagnostic controller. A dedicated Ethernet controller can use MII for a conventional parallel interface, while an MCU-based implementation can use RMII to reduce host I/O requirements. HP Auto-MDIX improves installation flexibility and automatic negotiation accommodates common 10/100 infrastructure. Because this PHY does not support 1000BASE-T, systems requiring higher transfer rates should use a Gigabit-capable controller and PHY instead. Thermal performance should be checked with the final exposed-pad and copper implementation.

خلاصه محصولات پیشنهادی

STM32G431C8T6TR STMicroelectronics استفاده‌شده در: Industrial Ethernet Gateway, Embedded Network Appliance STM32G071GBU6TR STMicroelectronics استفاده‌شده در: Industrial Ethernet Gateway KSZ8081RNACA Microchip Technology استفاده‌شده در: Industrial Ethernet Gateway STM32G071C8T6TR STMicroelectronics استفاده‌شده در: Programmable Automation Controller STM32G030K6T6TR STMicroelectronics استفاده‌شده در: Programmable Automation Controller KSZ8721SLI-TR Microchip Technology استفاده‌شده در: Programmable Automation Controller STM32G030C8T6TR STMicroelectronics استفاده‌شده در: Smart Building Controller STM32G031G6U6TR STMicroelectronics استفاده‌شده در: Smart Building Controller KSZ8041TLI-TR Microchip Technology استفاده‌شده در: Smart Building Controller LAN7500I-ABZJ-TR Microchip Technology استفاده‌شده در: Embedded Network Appliance, Embedded Server or Control Console LAN9730-ABZJ-TR Microchip Technology استفاده‌شده در: Embedded Network Appliance STM32G031J6M6TR STMicroelectronics استفاده‌شده در: Connected Sensor Platform STM32G031C8U6TR STMicroelectronics استفاده‌شده در: Connected Sensor Platform KSZ8041RNL-TR Microchip Technology استفاده‌شده در: Connected Sensor Platform LAN9313I-NZW-TR Microchip Technology استفاده‌شده در: Embedded Server or Control Console STM32G030C6T6TR STMicroelectronics استفاده‌شده در: Embedded Server or Control Console
What is the LAN8710AI-EZK-ABC?
The LAN8710AI-EZK-ABC is a Microchip Technology 10BASE-T/100BASE-TX Ethernet physical layer transceiver for industrial equipment. According to the manufacturer datasheet, it connects an Ethernet MAC through a variable-voltage MII or RMII interface, supports HP Auto-MDIX and automatic speed and duplex negotiation, and is offered in a 32-QFN 5 x 5 mm package rated for -40°C to 85°C.
What are the key specifications of LAN8710AI-EZK-ABC?
The LAN8710AI-EZK-ABC combines 10BASE-T and 100BASE-TX support with MII and RMII host interfaces in a 32-QFN 5 x 5 mm package. The manufacturer datasheet identifies IEEE 802.3-2005 compliance, HP Auto-MDIX, automatic speed and duplex negotiation, variable-voltage digital I/O, flexPWR technology, and an industrial temperature range of -40°C to 85°C.
Where can I download the LAN8710AI-EZK-ABC datasheet PDF?
The official LAN8710A/LAN8710Ai datasheet PDF is available from Microchip Technology through the manufacturer document link on this page. It contains the electrical characteristics, register descriptions, package drawings, pin assignments, and recommended application information. Use the pin-description table when assigning the 32-QFN connections and follow its exposed-pad and layout guidance during PCB design.
Where can I find the LAN8710AI-EZK-ABC pinout?
The LAN8710AI-EZK-ABC pinout is shown in the pin-description section of the official manufacturer datasheet. Because the device is a 32-pin QFN with an exposed thermal pad, the land pattern must be implemented exactly as specified. Use the package drawing for the 32 perimeter pins and exposed-pad geometry rather than relying on a generic QFN footprint.
Is LAN8710AI-EZK-ABC suitable for industrial applications?
The LAN8710AI-EZK-ABC is suitable for industrial applications because the AI designation identifies a -40°C to 85°C operating range. According to the manufacturer datasheet, the device also supports HP Auto-MDIX, automatic negotiation, and variable-voltage MII or RMII host interfacing. Its 5 x 5 mm QFN package and low-power flexPWR design suit compact industrial controllers requiring 10/100 Ethernet.
Where can I buy LAN8710AI-EZK-ABC online?
Use the Request a Quote form on this page to request LAN8710AI-EZK-ABC availability, current lead time, and ordering details. The request identifies the exact 32-QFN industrial-temperature orderable MPN, avoiding confusion with tape-and-reel or commercial-temperature variants. Stock status can change, so current allocation should be confirmed through the form before production purchasing.
What is the price of LAN8710AI-EZK-ABC?
The current price of LAN8710AI-EZK-ABC is supplied through the Request a Quote form on this page. Quote responses reflect order quantity, package form, current inventory, and market conditions. Use the form for the exact MPN rather than comparing packaging variants, because reel, tray, and temperature-grade order codes may have different procurement conditions.
What is the lead time for LAN8710AI-EZK-ABC?
The lead time for LAN8710AI-EZK-ABC should be confirmed through the Request a Quote form on this page. The form captures the exact industrial-temperature, 32-QFN part number and the required quantity, allowing procurement to return a current schedule. For scheduled production, include the requested delivery date and annual usage because allocation can vary by package form and order volume.
Is LAN8710AI-EZK-ABC in stock?
Current LAN8710AI-EZK-ABC stock status should be checked through the Request a Quote form on this page. The form is linked to the exact MPN and provides a direct route for confirming available inventory and lead time. Do not infer availability from general LAN8710A family listings, since individual package and temperature-grade order codes can have different stock positions.
What can replace the LAN8710AI-EZK-ABC?
The LAN8710AI-EZK-ABC can be replaced by a same-package LAN8710AI or LAN8710A order code when its temperature grade and assembly form meet the design requirements. Candidates in the 32-QFN 5 x 5 mm family include LAN8710AI-EZK, LAN8710AI-EZK-TR-ABC, LAN8710A-EZK, LAN8710A-EZC-ABC, and LAN8710A-EZC-TR-ABC. Confirm pin, register, thermal, and procurement requirements before substitution.
Is LAN8710AI-EZK-ABC the same as LAN8710A-EZK?
The LAN8710AI-EZK-ABC and LAN8710A-EZK use the same 32-QFN 5 x 5 mm physical format, but their temperature grades differ. The AI part supports -40°C to 85°C, while the manufacturer identifies the A option as available from 0°C to 85°C. The AI version is therefore preferable when the enclosure or operating environment falls below 0°C; the two MPNs should not be treated as equivalent without reviewing those limits.
LAN8710AI-EZK-ABC vs LAN8710A-EZK: which is better for industrial use?
The LAN8710AI-EZK-ABC is better for industrial use when operation below 0°C is required because its temperature range extends to -40°C, versus 0°C to 85°C for LAN8710A-EZK. Both use a 32-QFN 5 x 5 mm package and belong to the LAN8710A family. Choose by temperature requirement rather than by package, and verify the complete electrical and register specifications before substitution.
When should I choose LAN8710AI-EZK-ABC over LAN8710A-EZK-ABC?
Choose LAN8710AI-EZK-ABC over the commercial-temperature LAN8710A-EZK-ABC when the design must operate below 0°C. The industrial suffix corresponds to a -40°C to 85°C range, while the standard A suffix corresponds to 0°C to 85°C. Both retain the same 32-QFN package size, so temperature requirements are the decisive functional selection criterion.
Is LAN8710AI-EZK-ABC suitable for a 1000BASE-T network?
The LAN8710AI-EZK-ABC is not suitable for 1000BASE-T operation because it is a 10/100 Ethernet PHY supporting 10BASE-T and 100BASE-TX. It can negotiate a 100 Mbit/s link with compatible 10/100 equipment, but Gigabit Ethernet requires a 1000BASE-T PHY and corresponding magnetics. Select a Gigabit Ethernet PHY when the network link must operate at 1000 Mbit/s.
What is the best drop-in replacement for LAN8710AI-EZK-ABC?
The closest same-footprint drop-in replacements are the listed LAN8710A and LAN8710AI 32-QFN variants, subject to temperature, package-form, and exact ordering requirements. According to the manufacturer product information, the LAN8710A family supports MII or RMII, HP Auto-MDIX, and the same 32-QFN 5 x 5 mm package. No cross-brand substitute was established as pin-compatible from the cited manufacturer documentation.
What is the best Microchip equivalent for LAN8710AI-EZK-ABC?
The best Microchip equivalent depends on whether the priority is temperature range, assembly form, or exact order-code continuity. LAN8710AI-EZK and LAN8710AI-EZK-TR-ABC preserve the industrial -40°C to 85°C grade and 32-QFN package, while LAN8710A-EZK and LAN8710A-EZC-ABC use the commercial 0°C to 85°C grade. The original order code remains preferable when procurement continuity is critical.

داده‌های مرجع مهندسی برای LAN8710AI-EZK-ABC — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the LAN8710AI-EZK-ABC when the design needs a compact 10/100BASE-T Ethernet PHY, a variable-voltage MII or RMII host interface, and operation from -40°C to 85°C. It is particularly suitable for industrial controllers, gateways, building controls, and compact embedded appliances. Select LAN8710AI-EZK or LAN8710AI-EZK-TR-ABC when the industrial temperature grade is required but the procurement form differs. Use LAN8710A-EZK, LAN8710A-EZC-ABC, or LAN8710A-EZC-TR-ABC only when a 0°C minimum temperature is acceptable. None of these alternatives adds 1000BASE-T support; a Gigabit Ethernet controller and PHY are required when the link must exceed 100 Mbit/s. Final selection should also verify the exact register set, supply configuration, exposed-pad layout, magnetics selection, and assembly form against the manufacturer datasheet.

مقایسه با جایگزین‌ها

پارامتر این محصول LAN8710AI-EZK LAN8710AI-EZK-TR-ABC LAN8710A-EZK LAN8710A-EZC-ABC LAN8710A-EZC-TR-ABC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 32-QFN (5x5) 32-QFN (5x5) - same 32-QFN (5x5) - same 32-QFN (5x5) - same 32-QFN (5x5) - same 32-QFN (5x5) - same
Ethernet Speed Support 10BASE-T and 100BASE-TX 10BASE-T and 100BASE-TX 10BASE-T and 100BASE-TX 10BASE-T and 100BASE-TX 10BASE-T and 100BASE-TX 10BASE-T and 100BASE-TX
Maximum Link Rate 100 Mbit/s 100 Mbit/s 100 Mbit/s 100 Mbit/s 100 Mbit/s 100 Mbit/s
Host Interface MII or RMII MII or RMII MII or RMII MII or RMII MII or RMII MII or RMII
Auto-MDIX HP Auto-MDIX supported HP Auto-MDIX supported HP Auto-MDIX supported HP Auto-MDIX supported HP Auto-MDIX supported HP Auto-MDIX supported
Temperature Range -40°C to 85°C -40°C to 85°C -40°C to 85°C 0°C to 85°C 0°C to 85°C 0°C to 85°C
Power Technology flexPWR flexPWR flexPWR flexPWR flexPWR flexPWR
IEEE 802.3-2005 Support Supported Supported Supported Supported Supported Supported

تفاوت‌های کلیدی

  • Lower operating-temperature limit (در مقابلLAN8710A-EZK)
  • Industrial temperature option in the same 32-QFN footprint (در مقابلLAN8710A-EZC-ABC)
  • Compact Ethernet interface supporting two host-bus styles (در مقابلLAN8710A-EZK)
  • Exact industrial ordering option (در مقابلLAN8710AI-EZK-TR-ABC)

یادداشت‌های طراحی

Implement the 32-QFN footprint directly from the manufacturer package drawing, including the exposed thermal pad and its solder-mask and paste details. Place the PHY close to the board edge or Ethernet connector when practical, shorten the differential traces to the magnetics, and avoid splitting the return path beneath the pairs. The copper plane under the exposed pad should be evaluated thermally and for return-current continuity rather than added only for mechanical attachment.

Follow the manufacturer’s recommended Ethernet magnetic-component arrangement to control insertion loss, impedance, and radiated emissions. Keep the PHY-to-magnetics differential pair short and symmetric, use the specified impedance-controlled geometry, and keep unrelated switching nodes and noisy clocks away from this region. Do not route copper or split planes beneath the differential pairs if doing so creates a discontinuity in their reference path.

Provide the specified core and digital I/O supplies close to the device and decouple each supply domain according to the manufacturer application circuit. The digital interface voltage is variable, so the host bus voltage must match the selected I/O configuration. Confirm supply sequencing, voltage tolerance, and power-up behavior in the complete system; the adjustable interface capability does not remove the need to verify every supply rail independently.

Do not treat the LAN8710AI-EZK-ABC as a Gigabit Ethernet PHY: it supports 10BASE-T and 100BASE-TX, not 1000BASE-T. Also distinguish AI industrial parts from A commercial parts when substituting order codes. The AI suffix supports -40°C to 85°C, while the standard A option starts at 0°C, making an apparently identical 32-QFN replacement unsuitable for sub-zero environments.

اطلاعات انطباق

RoHS
Compliant
REACH
Compliant
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

RoHS and REACH compliance are identified in the cited comparison information. No explicit AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is stated for this order code.

جستجوهای مرتبط

lan8710ai ezk tr lan8710ai ezk datasheet LAN8710AI-EZK-ABC datasheet LAN8710AI-EZK-ABC pinout LAN8710AI-EZK-ABC replacement LAN8710AI-EZK-ABC equivalent LAN8710AI-EZK-ABC footprint LAN8710AI-EZK-ABC price LAN8710AI-EZK-ABC stock LAN8710AI-EZK-ABC vs LAN8710A-EZK Microchip LAN8710AI-EZK-ABC LAN8710AI 32-QFN Ethernet PHY LAN8710AI industrial Ethernet application LAN8710AI-EZK-ABC RMII interface

قطعات و اصطلاحات مرتبط

Microchip Technology LAN8710AI-EZK-ABC LAN8710AI-EZK LAN8710AI-EZK-TR-ABC LAN8710A-EZK LAN8710A-EZC-ABC LAN8710A-EZC-TR-ABC Ethernet PHY physical layer transceiver 10BASE-T 100BASE-TX MII RMII Ethernet MAC IEEE 802.3-2005 HP Auto-MDIX flexPWR technology 32-QFN QFN family surface mount industrial Ethernet Ethernet magnetics automatic negotiation RoHS REACH
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ