STMicroelectronics

LM2903YDT - Dual 36V Comparator, SOIC-8 | STMicroelectronics

MPN: LM2903YDT ✓ فعال
+2 V to +36 V Vdss 0.4 mA typical Id 8-pin SOIC Package
حداقل سفارش: 1 |

LM2903YDT نمای کلی

The STMicroelectronics LM2903YDT is a low-power dual differential voltage comparator with two independent open-collector outputs, a single-supply operating range of +2 V to +36 V, and an 8-pin SOIC package. It is designed for general-purpose signal comparison over wide supply-voltage and input-voltage ranges, making it suitable for industrial, automotive, and embedded control systems.

A voltage comparator is an analog interface that compares two input voltages and produces a digital logic result indicating which input is higher. The LM2903 belongs to the comparator hierarchy, which includes differential comparators, analog interface ICs, and semiconductor signal-conditioning devices. Its two independent channels allow one package to perform two separate threshold, sorting, level-detection, or overvoltage-monitoring functions without sharing internal circuitry between channels.

Key characteristics include a supply current of 0.4 mA, low input bias current of 25 nA typical, input offset current of ±5 nA typical, and operation from +2 V to +36 V with a single supply or ±1 V to ±18 V with dual supplies. The open-collector outputs allow wired-AND logic and require an external pull-up resistor. Low input current is especially useful when sensing high-impedance sensors because it reduces the input burden and allows the source impedance to determine practical sensitivity.

The device compares two differential inputs without saturating at either supply rail. This rail-to-rail comparison behavior supports designs in which the sensed signal approaches ground or the positive supply. Because the outputs are open collector, external pull-ups can establish the logic voltage independently of the comparator supply, allowing interfacing with TTL, CMOS, MCU inputs, relay drivers, or other open-collector loads. The low 0.4 mA supply current also keeps comparator overhead low in continuously powered equipment.

Typical applications include industrial sensor thresholding, motor and valve control, battery monitoring, overvoltage detection, window-comparator functions, and digital control systems. The automotive-qualified LM2903YDT variant is particularly appropriate for vehicle electronic modules requiring a wide supply range, low quiescent current, and robust open-collector signaling. Its SOIC-8 package supports conventional reflow assembly and provides adequate pin spacing for straightforward routing.

Designers should account for open-collector output behavior, input common-mode range, offset voltage, propagation delay, and supply decoupling. Place the supply bypass capacitor close to the device and use pull-up resistors that satisfy the required rise time without excessive switching current. Verify the selected logic family’s input thresholds and check the comparator’s response time against the application’s switching requirements.

This page combines the manufacturer specifications with practical interface guidance, package-aware alternatives, and a parameter-by-parameter comparison. It is intended to help engineers determine whether the LM2903YDT fits a particular dual-comparator design and whether a same-footprint replacement is electrically acceptable.

جایگزین‌های drop-in برای LM2903YDT — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای LM2903YDT (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Comparator Type, Package, Output Type, Number of Channels, Operating Temperature Range.

Texas Instruments
Comparator Type: Differential
Package: 8-SOIC (D), 3.90 mm body width
Output Type: Open-Collector (Open-Drain)
مقایسه با LM2903YDT →
Texas Instruments
Comparator Type: Dual differential comparator
Package: 8-pin SOIC (D)
Output Type: Open-collector
Texas Instruments
Comparator Type: Dual differential comparator
مقایسه با LM2903YDT →
STMicroelectronics
Comparator Type: Dual, independent voltage comparator
Package: 8-DFN, 2 x 2 mm
Output Type: Open-collector
مقایسه با LM2903YDT →
onsemi
Comparator Type: Dual independent precision voltage comparator
Output Type: Open-collector
Operating Temperature Range: -40 °C to +125 °C
مقایسه با LM2903YDT →
STMicroelectronics
Comparator Type: General-purpose voltage comparator
Output Type: Open-collector
Operating Temperature Range: -40 °C to +125 °C
مقایسه با LM2903YDT →

LM2903DT

✅ جایگزین مستقیم
📦 8-pin SOIC
Non-Y ordering variant; basic voltage, current, and open-collector specifications are equivalent, while temperature and qualification suffixes differ

📋 جایگزین مرجع (خارج از کاتالوگ)

LM2903Q2T

✅ جایگزین مستقیم
STMicroelectronics
📦 8-pin SOIC
Dual, independent voltage comparator · Low-power dual voltage comparator · 2 · Single supply or split supply · Open-collector · Rail-to-rail · Standard general-purpose comparator

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM2903AVQDRG4Q1

✅ جایگزین مستقیم
Texas Instruments
📦 8-pin SOIC
Differential · 2 · Open-Collector (Open-Drain) · 2 V to 36 V · +/-1 V to +/-18 V · 0.4 mA typ, independent of supply voltage · AEC-Q100 Grade 0 and Grade 1 · -40 °C to +125 °C

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM2903YDT حداکثر مقادیر مجاز و مشخصات الکتریکی

Comparator Type Dual differential voltage comparator
Number of Channels 2 channels
Single-Supply Voltage Range +2 V to +36 V
Dual-Supply Voltage Range ±1 V to ±18 V
جریان تغذیه 0.4 mA typical
Power Consumption Per Comparator 1 mW at +5 V
Input Bias Current 25 nA typical
Input Offset Current ±5 nA typical
نوع خروجی Open collector
Comparison Capability Rail-to-rail
بسته‌بندی 8-pin SOIC
نوع نصب Surface mount
Automotive Qualification AEC-Q100 and Q003 or equivalent
Advanced Screening AEC-Q001 and Q002 or equivalent

راهنمای پیکربندی پین LM2903YDT 8-pin soic

پیکربندی پین برای LM2903YDT (پکیج 8-pin soic). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 8-pin soic برای LM2903YDT

داده پین‌آوت تفصیلی موجود نیست برای LM2903YDT.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

LM2903YDT مناسب است برای 6 کاربردs: Automotive Battery Threshold Detection, Industrial Sensor Limit Detection, Motor and Valve Control Interface, Battery Charger Overvoltage Protection, Window Comparator for Precision Control, Embedded Control Signal Qualification.

🚗

Automotive Battery Threshold Detection

The LM2903YDT fits automotive battery monitoring because its two channels can compare separate voltage thresholds while operating from a single supply of +2 V to +36 V. The typical 0.4 mA supply current limits continuous overhead in always-on vehicle electronics, and the Y order suffix identifies an automotive-oriented qualification tier. Each open-collector output can pull up a vehicle logic input, with an external resistor setting the high level. Designers should divide the battery voltage appropriately, account for transient protection, and verify the input common-mode limits over the complete automotive electrical environment.

🏭

Industrial Sensor Limit Detection

The LM2903YDT is appropriate for industrial sensors whose output must be checked against a configurable threshold, especially when the sensor has high source impedance. Its 25 nA typical input bias current and ±5 nA typical input offset current reduce loading and threshold error, while two independent channels support upper and lower limits. The comparator can operate across a +2 V to +36 V supply range, simplifying designs in which the monitored signal shares a higher-voltage industrial rail. Use input protection as required, place the pull-up near the receiving logic, and avoid long high-impedance traces that can amplify noise.

🔧

Motor and Valve Control Interface

The LM2903YDT can generate a fault or control signal by comparing a feedback voltage with a reference level in motor-control and valve-position systems. Two channels allow complementary or independent limit checks within one package, while the 0.4 mA typical supply current is useful in compact power-constrained control electronics. The open-collector output can trigger an MCU input, a driver input, or a protection circuit through a pull-up. The design should account for electrical transients, common-mode limits, and propagation delay when determining whether the comparator can directly initiate a shutdown without additional filtering.

⚡

Battery Charger Overvoltage Protection

The LM2903YDT can supervise a charger or protected power rail by comparing a divided battery or output voltage against a reference. Its wide +2 V to +36 V single-supply operation allows the comparator to operate in elevated-voltage systems when the input network keeps the pins within their permitted common-mode range. Low typical input currents help preserve the accuracy of high-value dividers, and the two channels can monitor overvoltage and undervoltage conditions independently. Open-collector outputs permit wired fault signaling, provided the pull-up voltage remains compatible with the downstream logic and the fault node’s electrical limits.

📺

Window Comparator for Precision Control

The two channels in the LM2903YDT can be configured as upper and lower thresholds to create a window comparator. This arrangement is useful when an analog signal must remain within a permitted band before an actuator, converter, or digital system is enabled. The rail-to-rail comparison capability supports signals extending toward the supply rails, and the open-collector outputs can be combined to produce a single in-range or out-of-range indication. Resistor matching and input bias current should be included in the threshold-error budget, while hysteresis can be added where the monitored signal crosses the limits slowly.

🧩

Embedded Control Signal Qualification

The LM2903YDT can qualify a noisy or slowly changing analog signal before it enters a microcontroller or programmable controller. A divided signal is compared with a reference, and the open-collector result provides a defined digital transition at the receiver. The low 0.4 mA supply current helps when the controller rail is always active, while the wide supply range provides flexibility across industrial and automotive systems. Choose the pull-up voltage for the receiving logic, keep the comparator input route short, and check whether the application requires a faster switching device than the LM2903 propagation characteristics can provide.

خلاصه محصولات پیشنهادی

LM2903DT Same-family dual comparator for threshold detection استفاده‌شده در: Automotive Battery Threshold Detection, Industrial Sensor Limit Detection, Motor and Valve Control Interface, Battery Charger Overvoltage Protection, Window Comparator for Precision Control, Embedded Control Signal Qualification LM2903Q2T STMicroelectronics استفاده‌شده در: Automotive Battery Threshold Detection, Industrial Sensor Limit Detection, Battery Charger Overvoltage Protection, Window Comparator for Precision Control LM2903AVQDR Texas Instruments استفاده‌شده در: Motor and Valve Control Interface, Embedded Control Signal Qualification
Where to buy LM2903YDT online?
The LM2903YDT can be requested through the Request a Quote form on this page. The form is the appropriate channel for checking current availability, order quantity, shipment timing, and the exact SOIC-8 ordering code without relying on a static catalog figure. The manufacturer identifies the part as the automotive-grade suffix of the LM2903 dual-comparator family.
What is the price of LM2903YDT?
The LM2903YDT price is confirmed through the Request a Quote form on this page because availability and commercial terms can change with order quantity and packaging requirements. The product is a dual, open-collector voltage comparator in an 8-pin SOIC package. A static price figure should not be used for budgeting without a current quotation.
What is the lead time for LM2903YDT?
Use the Request a Quote form on this page to obtain the current lead time for the exact LM2903YDT ordering code and requested quantity. The device is manufactured by STMicroelectronics as an 8-pin SOIC automotive-qualified comparator. Lead time can depend on batch availability, order volume, and whether additional inspection or screening is required.
Is LM2903YDT in stock?
Current LM2903YDT stock status should be confirmed through the Request a Quote form on this page rather than inferred from a distributor search page. The exact part contains two low-power open-collector comparators in an 8-pin SOIC package and carries the automotive-oriented Y suffix. Submit the required quantity to receive a current availability response.
What is the difference between LM2903YDT and LM2903DT?
The LM2903YDT and LM2903DT use the same 8-pin SOIC comparator arrangement, but their order suffixes identify different qualification or temperature-oriented variants. The LM2903YDT is associated with automotive qualification under AEC-Q100 and Q003 or equivalent, while the LM2903DT is the non-Y ordering variant. Check the manufacturer ordering table for the exact temperature and qualification requirements before substitution.
LM2903YDT vs LM2903Q2T - which is better for automotive control?
The LM2903YDT is the better-supported choice when the design requires the automotive-oriented Y-qualified device, while the LM2903Q2T is described as having identical sequential-database performance. Both provide the same basic LM2903 dual-comparator function, including open-collector outputs, low supply current, and a wide supply range. Qualification, temperature grade, and traceability should determine the final selection.
When should I choose LM2903YDT over LM2903DT?
Choose the LM2903YDT when the application calls for the automotive-qualified Y variant and requires its associated operating and documentation requirements. Keep the LM2903DT for designs that do not need that specific qualification tier and fit the non-Y ordering variant. Both use the same SOIC-8 footprint, but suffix changes can carry meaningful qualification differences.
Is LM2903YDT suitable for automotive battery monitoring?
The LM2903YDT is suitable for automotive battery and supply-monitoring functions because it is the Y-qualified LM2903 variant, operates from a single +2 V to +36 V supply, and has 0.4 mA typical supply current. Its two independent channels can monitor two thresholds, while open-collector outputs can drive a pull-up logic signal. The final input common-mode and transient limits must be checked against the vehicle electrical environment.
What can replace LM2903YDT?
An LM2903-family part is a replacement candidate only when it has the same SOIC-8 pin arrangement, compatible input and output behavior, and suitable voltage, temperature, and qualification ratings. LM2903DT and LM2903Q2T are the closest same-family candidates found for this page. Before replacing the Y-qualified device, verify whether the substitute’s temperature grade and automotive qualification meet the original design requirement.
Is LM2903YDT the same as LM2903AVQDR?
No, the two order codes are not identical even though both belong to the LM2903 family. The LM2903YDT uses the Y automotive-oriented suffix, while the LM2903AVQDR identifies a different order-code combination. Their exact package and qualification details must be compared before treating either part as a drop-in replacement, especially for automotive production programs.
Where to download the LM2903YDT datasheet PDF?
Download the LM2903YDT datasheet from the official STMicroelectronics PDF linked on this page. The document describes the low-power dual comparator, including its +2 V to +36 V single-supply range, ±1 V to ±18 V dual-supply range, 0.4 mA supply current, and open-collector architecture. Use the manufacturer document for ordering codes, pin assignments, electrical limits, and qualification details.
Where to find the LM2903YDT pinout?
The LM2903YDT pin assignment is documented in the STMicroelectronics LM2903 datasheet under the device pin-description information. The device is packaged in 8-pin SOIC and contains two independent comparator channels. Use the manufacturer pin table when assigning input, output, supply, and ground nets because connector naming conventions can differ between schematic symbols.
What are the key specifications of LM2903YDT that engineers should know?
The principal LM2903YDT specifications are its dual-comparator configuration, 0.4 mA typical supply current, 25 nA typical input bias current, ±5 nA typical input offset current, and +2 V to +36 V single-supply operation. It uses open-collector outputs and an 8-pin SOIC package. These parameters make it suitable for low-power sensing and control circuits that need wide supply tolerance.
What is the best TI equivalent for LM2903YDT?
The Texas Instruments LM2903 family is a functional cross-reference, but an exact drop-in selection must match the SOIC-8 footprint, input polarity, open-collector output, supply range, temperature grade, and qualification requirements. The available cross-reference information identifies the TI LM2903 and LM2903B as related family devices without establishing a qualified automotive Y-suffix ordering code. Review the exact TI orderable MPN and its datasheet before releasing a substitution.
Does LM2903YDT need an output pull-up resistor?
Yes, each LM2903YDT open-collector output requires an external pull-up resistor to establish a high logic level. The resistor value determines the logic rise time and current drawn while the transistor is off. Select it using the receiving logic’s input threshold, leakage requirements, maximum switching frequency, and the number of devices connected to the shared open-collector node.

داده‌های مرجع مهندسی برای LM2903YDT — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the LM2903YDT when the design needs two independent, low-power comparators in an 8-pin SOIC package, particularly for automotive-oriented threshold, monitoring, and fault-detection functions. Its +2 V to +36 V single-supply range, 0.4 mA typical supply current, and open-collector outputs support wide-range industrial and vehicle systems. The LM2903DT is appropriate when the non-Y ordering variant is preferred, but qualification and temperature requirements should be checked. The LM2903Q2T is a close same-family option when its Q2 grade meets the production requirements. The LM2903AVQDR requires explicit review of its A and V suffix meanings. Do not substitute solely by package: verify input polarity, common-mode limits, output behavior, propagation delay, temperature grade, and automotive qualification.

مقایسه با جایگزین‌ها

پارامتر این محصول LM2903DT LM2903Q2T LM2903AVQDR
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Comparator Configuration Dual differential comparator Dual differential comparator Dual differential comparator Dual differential comparator
Output Type Open collector Open collector Open collector Open collector
Automotive Qualification Suffix Y Non-Y Q2 AVQ

تفاوت‌های کلیدی

  • Automotive-oriented order suffix (در مقابلLM2903DT)
  • Low quiescent supply demand (در مقابلLM2903Q2T)
  • Very low input loading (در مقابلLM2903AVQDR)

یادداشت‌های طراحی

Do not treat an open-collector output as a push-pull logic output. Each channel requires a pull-up resistor, and multiple open-collector outputs may share one pull-up when wired-AND behavior is acceptable. Select the resistor using the receiver’s input thresholds and leakage, the required rise time, and the total capacitance of the connected traces. Omitting the pull-up leaves the output unable to establish a valid high state.

Keep comparator inputs short and connect them to a quiet reference ground. The typical 25 nA input bias current is small, but long PCB traces can introduce leakage and coupling that become significant with very high source impedances. If the input crosses a threshold slowly, add hysteresis to prevent output chatter and review propagation delay when defining the allowable transition time.

Place the supply bypass capacitor close to the device’s supply and ground pins, and provide a low-impedance ground return for both comparator channels. The open-collector pull-up should be positioned near the receiving circuit when the node is long or noisy. Maintain the SOIC-8 footprint and verify the pin assignment in the manufacturer datasheet before assigning nets, because schematic-library conventions can differ.

For automotive or industrial rails, distinguish the comparator’s +36 V maximum single-supply capability from the separate maximum input and differential-voltage ratings. Transient pulses, supply overshoot, and input common-mode excursions can violate the device limits even when the nominal rail is within range. Use the datasheet’s recommended protection network and validate it against the final source impedance and pulse profile.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The manufacturer datasheet states that the device is qualified and characterized according to AEC Q100 and Q003 or equivalent, with advanced screening according to AEC Q001 and Q002 or equivalent. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not explicitly established.

تاریخ تأیید داده‌ها: 2026-11-13 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

LM2903YDT datasheet LM2903YDT pinout LM2903YDT datasheet pdf LM2903YDT SOIC-8 comparator LM2903YDT equivalent LM2903YDT replacement LM2903YDT vs LM2903DT LM2903YDT automotive comparator LM2903YDT open collector output STMicroelectronics LM2903YDT LM2903YDT price LM2903YDT stock

قطعات و اصطلاحات مرتبط

STMicroelectronics LM2903YDT LM2903DT LM2903Q2T LM2903AVQDR LM2903 Texas Instruments dual differential comparator voltage comparator analog interface IC semiconductor open-collector output rail-to-rail comparison input bias current input offset current supply current single supply dual supply 8-pin SOIC SOIC family surface mount automotive electronics industrial control sensor thresholding AEC-Q100 RoHS REACH
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ