LM317LD13TR - 1.2-37V Adjustable LDO | STMicroelectronics
MPN: LM317LD13TR ✓ فعالLM317LD13TR نمای کلی
جایگزینهای drop-in برای LM317LD13TR — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای LM317LD13TR (همان فرمفاکتور و فوتپرینت) — متفاوت در Manufacturer, Package, RoHS Status.
LM217LD
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
LM317LD13TR
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←LM317LBDR2G
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
LM317KCSE3
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
LM2904BIDR
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←LM317LD13TR حداکثر مقادیر مجاز و مشخصات الکتریکی
| Regulator Type | Adjustable linear voltage regulator |
| Output Polarity | Positive |
| محدوده ولتاژ خروجی | 1.2 V to 37 V |
| محدوده ولتاژ ورودی | 5 V to 40 V |
| Output Current | 100 mA |
| Output Voltage Type | Adjustable / Variable |
| Line Regulation | 0.01% typical |
| Load Regulation | 0.1% typical |
| Protection | Thermal overload and short-circuit protection |
| بستهبندی | 8-SOIC / SO-8 |
| نوع نصب | Surface Mount |
| وضعیت چرخه عمر | Active |
| پیکربندی خروجی | Single output |
| Manufacturer | STMicroelectronics |
| Datasheet Description | Low current 1.2 to 37 V adjustable voltage regulator |
| Distributor Stock Example | 1,490 units in stock at LCSC |
| Verified Distributor Unit Price Example | From $0.0571 at LCSC |
| وضعیت RoHS | Unknown; not stated in verified data |
| REACH Status | Unknown; not stated in verified data |
| AEC-Q100 Status | Not stated in verified data |
پیکربندی پین LM317LD13TR
| پین 1 | ADJ — Adjustment input |
| پین 2 | OUT — Regulated output |
| پین 3 | IN — Input supply |
| پین 4 | NC — Not connected (per package convention; verify with manufacturer datasheet) |
| پین 5 | NC — Not connected (per package convention; verify with manufacturer datasheet) |
| پین 6 | NC — Not connected (per package convention; verify with manufacturer datasheet) |
| پین 7 | NC — Not connected (per package convention; verify with manufacturer datasheet) |
| پین 8 | NC — Not connected (per package convention; verify with manufacturer datasheet) |
کاربردهای معمول
LM317LD13TR مناسب است برای 6 کاربردs: Low-noise analog supply, Sensor excitation and reference circuits, Laboratory and educational power supply, Embedded control and instrumentation, Precision measurement front ends, Small industrial control boards.
Low-noise analog supply
The LM317LD13TR is suitable for powering small analog signal-conditioning circuits where low switching ripple and simple adjustment are more important than maximum conversion efficiency. Its 1.2 V to 37 V adjustable output covers common laboratory and control-rail voltages, while the external resistor network lets the designer select the required level. Place the input and output bypass capacitors close to the device and account for linear dissipation when VIN and VOUT differ substantially.
پیشنهادی
Sensor excitation and reference circuits
An adjustable LM317LD13TR can provide a compact reference or excitation rail for sensor front ends, particularly when the required voltage is stable but the current demand is modest. The 1.2 V minimum output and resistor-programmable design allow adaptation to different sensor ranges. Use the adjustment network with stable resistors and verify temperature drift and output accuracy in the final enclosure, where thermal gradients can affect precision measurements.
پیشنهادی
Laboratory and educational power supply
The LM317LD13TR is a straightforward choice for laboratory or educational supplies because the resistor adjustment method is easy to implement and troubleshoot. Its adjustable 1.2 V to 37 V output supports multiple benchrail experiments without requiring a complex digital control loop. Add current limiting, protection, and adequate heat spreading around the SO-8 package. For higher currents, choose a regulator variant and heatsink designed for the required dissipation.
پیشنهادی
Embedded control and instrumentation
The LM317LD13TR can generate a local adjustable rail for embedded controllers, transducers, or analog interface boards when the load is below the verified 100 mA listing. Its simple three-terminal topology reduces external active components and makes schematic review straightforward. Keep the regulator close to the protected load, provide input and output capacitors, and ensure the board has enough copper area to dissipate the calculated linear-regulator heat.
پیشنهادی
Precision measurement front ends
Measurement front ends often benefit from a quiet, locally regulated analog rail close to the sensing circuitry. The LM317LD13TR can create an adjustable rail for amplifiers, reference networks, and analog-to-digital input stages, while its low-current profile suits compact instruments. Because the regulator is linear, evaluate heat rise at the highest input voltage and load, and use low-noise resistors and capacitors where measurement precision depends on supply behavior.
پیشنهادی
Small industrial control boards
For small industrial control boards, the LM317LD13TR can provide a simple auxiliary rail for sensors, interface ICs, or relay-control sections when the current remains within the verified device rating. Its wide adjustable output range helps accommodate legacy 24 V and lower-voltage control architectures. Validate industrial temperature requirements, input transients, and isolation requirements separately; the regulator itself does not provide galvanic isolation.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای LM317LD13TR — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | LM217LD | LM317LD13TR | LM317LBDR2G | LM317KCSE3 | LM2904BIDR |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | onsemi | STMicroelectronics | STMicroelectronics |
| Package | 8-SOIC / SO-8 | SO-8 | 8-SOIC | SOIC-8 | SOIC-8 | SOIC-8 |
تفاوتهای کلیدی
- Documented low-current operating point (در مقابلLM317LBDR2G)
- Adjustable output with wide range (در مقابلLM217LD)
- SO-8 packaging for compact boards (در مقابلLM2904BIDR)
یادداشتهای طراحی
Estimated: linear-regulator dissipation is approximately P = (VIN - VOUT) × IOUT. For example, at 40 V input, 12 V output, and 100 mA, estimated dissipation is 2.8 W before considering margin. Check the SOIC thermal resistance and use sufficient copper area; derate the design if the calculated junction temperature exceeds the device rating.
Place the input capacitor close to the input pin and the output capacitor close to the output pin. Keep the adjustment resistor divider compact and away from high-current return paths. Confirm capacitor voltage ratings and polarity against the maximum input voltage, and follow the manufacturer layout guidance for the exact LM317LD13TR package.
Do not assume that the generic LM317 current rating applies to LM317LD13TR. The verified distributor description specifies a 100 mA configuration, so higher-load designs require a different regulator or thermal solution. Also verify that any replacement uses the same pinout; an SO-8 package alone does not guarantee pin compatibility.
اطلاعات انطباق
The supplied manufacturer and distributor search results do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Verify these attributes with the manufacturer or an authorized distributor before regulated production use.