STMicroelectronics

LM358AWPT - Low-Power Dual Op Amp | STMicroelectronics | TSSOP-8

MPN: LM358AWPT ✓ فعال
40 mA Id 8-pin TSSOP Package
حداقل سفارش: 1 |

LM358AWPT نمای کلی

The STMicroelectronics LM358AWPT is a low-power, dual operational amplifier packaged in an 8-pin TSSOP. It integrates two general-purpose amplifier channels in one surface-mount package, with a listed output-current capability of 40 mA. The LM358AWPT combines the familiar dual-amplifier organization with a compact power-surface-mount footprint, making it suitable for signal conditioning, buffering, feedback control, and low-frequency analog circuits.

An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify the difference between two input voltages. A dual operational amplifier contains two amplifier sections that share common supply and ground connections but can process separate signals. In the broader semiconductor hierarchy, the LM358 belongs to the operational-amplifier class, then to amplifier ICs, analog ICs, and ultimately the wider integrated-circuit and semiconductor categories.

The LM358AWPT is identified by STMicroelectronics as a low-power dual operational amplifier. Its two-circuit configuration reduces component count and board area when two related analog functions must be implemented. The 8-pin TSSOP package supports automated assembly while preserving a compact outline. The listed 40 mA output-current capability also makes the device relevant to designs that require more drive than a minimum-footprint micropower amplifier.

Each amplifier section can support common analog signal-processing tasks such as voltage amplification, impedance buffering, comparators, current-sensing interfaces, and active-feedback control. Because the two channels share package-level power pins, their operating supply is common even when they perform unrelated functions. PCB designers should still route input, output, supply, and ground connections carefully to minimize coupling between the two channels and to preserve signal integrity near the device.

Typical applications include industrial sensor interfaces, low-voltage control loops, audio and communications equipment, battery-powered instrumentation, and general-purpose analog signal conditioning. In a feedback controller, one channel might amplify a sensor signal while the other buffers a reference or drives an error amplifier. In a sensing circuit, the dual organization can reduce the number of packages needed compared with separate single-channel amplifiers.

The principal design consideration is supply compatibility. Confirm the minimum and maximum operating voltages, input common-mode range, output swing, input bias current, noise, slew rate, and stability requirements in the STMicroelectronics manufacturer datasheet before using the device with a selected system rail. Decoupling capacitors, grounding, output-load limits, and any reactive load compensation should follow the application guidance in that datasheet.

This product page organizes the LM358AWPT information around verified product identity, package details, directly compatible replacement options, application guidance, and PCB-level design considerations. It also distinguishes exact drop-in candidates from broader LM358 comparisons so that engineers can assess footprint, function, and operating-limit compatibility before authorizing a substitution.

جایگزین‌های drop-in برای LM358AWPT — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای LM358AWPT (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Amplifier Type, Package.

STMicroelectronics
Amplifier Type: Standard general-purpose operational amplifier
Package: 8-TSSOP
مقایسه با LM358AWPT →
STMicroelectronics
Package: 8-pin TSSOP
مقایسه با LM358AWPT →

LM358AWYPT

✅ جایگزین مستقیم
📦 8-pin TSSOP
Same dual-amplifier configuration and 8-pin TSSOP footprint; the ordering suffix indicates a grade or reel-processing difference while the core channel count remains identical at 2.

📋 جایگزین مرجع (خارج از کاتالوگ)

LM358APT

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
STMicroelectronics
📦 8-pin TSSOP
Standard general-purpose operational amplifier · 2 channels · 2 circuits · 8-TSSOP · Surface mount

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM358PT

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
STMicroelectronics
📦 8-pin TSSOP
2 amplifiers · General-purpose operational amplifier · 2 circuits · 3 V to 32 V · Single supply · 1.1 MHz · 100 dB · 0.6 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM358AQUPT

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-pin TSSOP
Same 2-channel LM358A function and 8-pin TSSOP land pattern, with a different ordering suffix for grade or temperature classification and identical core package pin count at 8.

📋 جایگزین مرجع (خارج از کاتالوگ)

LM358AYPT

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-pin TSSOP
Same 2-channel LM358A configuration and 8-pin TSSOP footprint, with a different ordering suffix that may change temperature or grade classification while preserving the physical interface.

📋 جایگزین مرجع (خارج از کاتالوگ)

LM358AWPT حداکثر مقادیر مجاز و مشخصات الکتریکی

Amplifier Type General-purpose operational amplifier
Number of Amplifier Channels 2 channels
Output Current Capability 40 mA
Power Class Low power
Package Type 8-pin TSSOP
Total Pin Count 8 pins
نوع نصب Surface mount

پیکربندی پین LM358AWPT

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
پین 1 OUT1 — Output of amplifier channel 1
پین 2 IN1− — Inverting input of amplifier channel 1
پین 3 IN1+ — Non-inverting input of amplifier channel 1
پین 4 V− — Negative supply connection
پین 5 IN2+ — Non-inverting input of amplifier channel 2
پین 6 IN2− — Inverting input of amplifier channel 2
پین 7 OUT2 — Output of amplifier channel 2
پین 8 V+ — Positive supply connection

کاربردهای معمول

LM358AWPT مناسب است برای 6 کاربردs: Industrial Sensor Signal Conditioning, Battery-Powered Instrumentation, Audio Preamp and Output Buffering, Communications Interface Buffering, Active Feedback Control, Test and Measurement Front Ends.

🏭

Industrial Sensor Signal Conditioning

The LM358AWPT fits sensor-amplification and conditioning stages that require two channels in one compact 8-pin TSSOP package. One section can amplify a sensor output while the other provides buffering or reference amplification, reducing the number of separate amplifier packages and associated board area. Its listed 40 mA output-current capability also provides useful drive margin for moderate loads. Before finalizing the design, confirm that the selected sensor output lies within the input common-mode range and that the required gain and accuracy satisfy the electrical limits in the STMicroelectronics manufacturer datasheet. Place bypass capacitance close to pins 8 and 4 and keep high-impedance input traces short to reduce susceptibility to noise and parasitic loading.

🔧

Battery-Powered Instrumentation

The LM358AWPT is appropriate for low-voltage instrumentation in which two low-power amplifier sections are useful on a common supply rail. A channel can condition a transducer signal while the second channel buffers an intermediate node, creates an adjustable reference, or forms part of an error-feedback loop. The 8-pin TSSOP footprint is particularly useful where a through-hole dual-op-amp package would consume excessive board area. Because low-power operation does not automatically mean unrestricted input or output ranges, verify supply current, input common-mode limits, output swing, and quiescent behavior against the expected battery operating region. Stable power-ground routing and local supply bypass are essential when both channels operate near low signal amplitudes.

🎧

Audio Preamp and Output Buffering

The two channels in the LM358AWPT can support separate stages in a low-frequency audio preamplifier, such as input amplification followed by gain or impedance buffering. The device must be assessed for the audio band of interest, output swing on the chosen supply, capacitive-load behavior, and noise performance using the STMicroelectronics manufacturer datasheet. Its listed 40 mA output-current capability is useful when driving the next stage through a coupling network, but it does not remove the need to observe maximum output-current and voltage limits. Keep the two amplifier paths physically separated enough to limit feedback through shared supply impedance, and place the supply bypass capacitor where it can suppress coupling from both channels effectively.

🌐

Communications Interface Buffering

The LM358AWPT can be used in communications equipment for impedance conversion, gain adjustment, and active feedback around line-driver or receiver stages. Its dual-channel organization permits one amplifier to condition the forward signal path while the other supports feedback, monitoring, or a second polarity. The 8-pin TSSOP package supports compact surface-mount assemblies, while the two channels share common supply pins that require careful decoupling. Confirm that the signal amplitude remains inside the input common-mode range and that the output can meet the load's voltage and current requirements. Route sensitive input traces away from output and high-current return paths, and use a continuous ground reference to minimize channel-to-channel coupling and data errors.

⚡

Active Feedback Control

The LM358AWPT can implement error amplification in an active feedback control loop when its bandwidth, slew rate, input common-mode range, and output swing are adequate for the loop. One channel can compare a feedback signal with a reference, while the other can buffer the reference or drive an additional analog stage. The device's two amplifier channels and compact 8-pin TSSOP package make it a practical fit for dual-loop industrial and control boards. Stability analysis must account for the sensor path, compensation method, load, and supply impedance. In particular, confirm operating limits from the STMicroelectronics manufacturer datasheet and place the bypass capacitor close to the package to prevent supply feedback from degrading loop stability.

🔧

Test and Measurement Front Ends

The LM358AWPT is suitable for compact test and measurement front ends that need signal amplification and buffering within the same 8-pin TSSOP package. One channel can amplify a probe or sensor output, while the other can buffer it for an ADC, comparator, or instrument input stage. The general-purpose architecture also supports offset-null and feedback-network layouts when precision requirements permit. Validate the full measurement chain against the manufacturer's offset-voltage, bias-current, noise, bandwidth, and common-mode specifications rather than relying on nominal gain alone. Use short guarded input traces, a low-impedance ground return, and local supply bypassing to preserve measurement integrity and minimize channel coupling.

What is the LM358AWPT?
The LM358AWPT is a low-power dual general-purpose operational amplifier from STMicroelectronics, with two amplifier channels and a 40 mA listed output-current capability in an 8-pin TSSOP package. According to the STMicroelectronics manufacturer datasheet, it is intended for general analog signal-processing functions where two amplifiers can share common supply and ground connections.
What is the LM358AWPT pinout?
The LM358AWPT uses the standard 8-pin dual-op-amp arrangement: pin 1 is OUT1, pin 2 is IN1−, pin 3 is IN1+, pin 4 is V−, pin 5 is IN2+, pin 6 is IN2−, pin 7 is OUT2, and pin 8 is V+. Use the pin-description table in the STMicroelectronics manufacturer datasheet when assigning PCB tracks and checking input polarity.
Where can I download the LM358AWPT datasheet PDF?
The LM358AWPT datasheet PDF is available from the official STMicroelectronics product resources at https://www.st.com/resource/en/datasheet/lm358.pdf. The document contains the authoritative pin description, electrical characteristics, application information, package dimensions, and recommended operating conditions for the LM358 family.
Where can I buy LM358AWPT online?
The LM358AWPT can be requested through the Request a Quote form on this page, where the exact MPN, package, target quantity, and delivery requirements can be reviewed together. Because availability and commercial terms can change, use the form for a current quotation rather than relying on a static listing or historical market figure.
What is the price of LM358AWPT?
A current unit price for LM358AWPT should be obtained through the Request a Quote form on this page. The structured pricing area on this page reflects exact-MPN, quantity-break sourcing when an eligible listing is available, while the request form supports project quantities and delivery-specific quotations.
What is the lead time for LM358AWPT?
The current lead time for LM358AWPT should be confirmed through the Request a Quote form on this page. Include the required quantity, acceptable delivery date, and packaging preference so that supply planning can be based on the exact 8-pin TSSOP order rather than a generic LM358 family quantity.
Is LM358AWPT in stock?
Current LM358AWPT inventory should be checked through the Request a Quote form on this page. Submit the required quantity and delivery schedule, and the sourcing response can confirm availability for the exact LM358AWPT ordering code and its 8-pin TSSOP configuration.
What can replace LM358AWPT?
A drop-in replacement for LM358AWPT should use the same 8-pin TSSOP footprint, maintain the standard dual-op-amp pin arrangement, and satisfy the original supply-voltage, common-mode, output-swing, and load requirements. Candidate devices must be checked against the STMicroelectronics manufacturer datasheet rather than selected solely from the generic LM358 name.
Is LM358AWPT the same as LM358AWYPT?
The LM358AWPT and LM358AWYPT belong to the same STMicroelectronics LM358A family and are presented as 8-pin TSSOP devices, but their ordering suffixes can encode different grade, temperature, or reel-processing attributes. Confirm the full ordering-code table and electrical-temperature ratings in the STMicroelectronics manufacturer datasheet before treating them as interchangeable.
What is the best drop-in replacement for LM358AWPT?
The closest replacement is a dual low-power operational amplifier with the same 8-pin TSSOP land pattern, identical channel pin assignments, and equivalent supply and common-mode limits. STMicroelectronics family members such as LM358AWYPT are the leading candidates, but the selection must be validated against voltage range, input bias current, output swing, noise, and temperature requirements.
When should I choose LM358AWPT over another LM358 variant?
Choose LM358AWPT when the design specifically requires the STMicroelectronics LM358A dual-amplifier configuration in an 8-pin TSSOP package. Prefer another member only when a documented ordering attribute provides a needed advantage, such as a broader temperature grade, while preserving the same footprint, pinout, supply limits, and signal-chain requirements.
Is LM358AWPT suitable for industrial sensor conditioning?
The LM358AWPT can suit sensor-conditioning applications when its operating limits cover the sensor output, supply rail, and required bandwidth. The STMicroelectronics manufacturer datasheet should be used to verify input common-mode range, offset, bias current, output swing, and noise. Its two channels can reduce package count by combining signal conditioning with buffering or active feedback.
How do I use LM358AWPT as a buffer?
Connect the signal to the non-inverting input, connect the inverting input to the corresponding output, and place a suitable bypass capacitor from the positive supply pin to ground near the device. The standard LM358 dual-channel pin arrangement is OUT1 at pin 1, IN1− at pin 2, IN1+ at pin 3, V− at pin 4, IN2+ at pin 5, IN2− at pin 6, OUT2 at pin 7, and V+ at pin 8.
What are the key specifications of LM358AWPT that engineers should know?
The key confirmed identifiers are two low-power general-purpose amplifier channels, a listed 40 mA output-current capability, and an 8-pin TSSOP surface-mount package. The manufacturer datasheet should also be checked for supply voltage, input common-mode range, output swing, open-loop gain, bandwidth, slew rate, offset voltage, bias current, supply current, noise, and operating temperature.
How should LM358AWPT PCB layout be designed?
Place the supply bypass capacitor close to pin 8 and ground return close to pin 4, then route each input and output with short traces and no unnecessary coupling between channels. Keep sensitive inputs away from output nodes and switching nodes, maintain a stable ground reference, and follow the decoupling and stability recommendations in the STMicroelectronics manufacturer datasheet.

داده‌های مرجع مهندسی برای LM358AWPT — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the LM358AWPT when the design needs a low-power, dual general-purpose operational amplifier in an 8-pin TSSOP package and its documented supply, common-mode, output, and temperature limits satisfy the application. Select LM358AWYPT when its ordering-code grade better matches the required temperature or processing classification while preserving the same family footprint. LM358APT, LM358PT, LM358AQUPT, and LM358AYPT are additional same-family candidates when their ordering attributes and electrical ratings meet the design. Do not choose a generic LM358 substitute solely because its pin count is eight: DIP-8 and SOIC-8 devices use different PCB land patterns, and low-voltage rail-to-rail amplifiers may not support the same supply range. For designs requiring more than two channels, a quad amplifier can reduce package count, but the LM358AWPT remains preferable when its two-channel organization matches the actual signal-chain requirement.

مقایسه با جایگزین‌ها

پارامتر این محصول LM358AWYPT LM358APT LM358PT LM358AQUPT LM358AYPT
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP
Amplifier Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Power Class Low power Low power Low power Low power Low power Low power

تفاوت‌های کلیدی

  • Combines two amplifier channels in one compact surface-mount package (در مقابلLM324ANSR)
  • Maintains the same TSSOP footprint across STMicroelectronics LM358A ordering variants (در مقابلLM358AWYPT)
  • Uses the standard dual-op-amp pin arrangement for straightforward PCB implementation (در مقابلLM358PT)

یادداشت‌های طراحی

Place the supply bypass capacitor immediately between pins 8 and 4, with a short ground return and minimal loop area. Route the two amplifier channels to avoid sharing long input or output paths, because the channels use common supply pins even though their signal inputs and outputs are independent. Use the manufacturer application guidance for the recommended capacitance and ESR range.

Do not select a generic LM358 replacement from the device name alone. Confirm that the substitute has an 8-pin TSSOP land pattern, the same pin assignments, adequate supply-voltage range, acceptable input common-mode range, and the required output-current capability. Generic cross-reference pages may include DIP and SOIC devices, which do not match this TSSOP footprint.

Keep high-impedance inputs short and guard them against nearby outputs, clock lines, inductors, and switching nodes. If either channel drives a capacitive load, verify stability in the STMicroelectronics manufacturer datasheet and add isolation resistance close to the output when required. Separate sensitive ground returns from output-current paths to reduce channel-to-channel coupling.

Check the complete supply operating region rather than only nominal rail voltage. Confirm minimum input voltage for correct operation, maximum supply voltage, output swing, quiescent current, and output-current limits. If both channels can operate near the output-current capability of 40 mA, calculate the worst-case power dissipation and provide copper area and layout conditions consistent with the package thermal data.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

Compliance status is not stated in the product records used for this page. Check the current STMicroelectronics product documentation and declaration before using the LM358AWPT in a regulated production design.

تاریخ تأیید داده‌ها: 2026-11-17 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

LM358AWPT datasheet LM358AWPT datasheet pdf LM358AWPT pinout STMicroelectronics LM358AWPT LM358AWPT 8-TSSOP LM358AWPT dual operational amplifier LM358AWPT replacement LM358AWPT equivalent LM358AWPT vs LM358AWYPT LM358AWPT price LM358AWPT stock LM358AWPT sensor interface

قطعات و اصطلاحات مرتبط

STMicroelectronics LM358AWPT LM358AWYPT LM358APT LM358PT LM358AQUPT LM358AYPT LM324ANSR LM2902NSR operational amplifier dual operational amplifier general-purpose amplifier analog integrated circuit amplifier IC integrated circuit semiconductor TSSOP-8 TSSOP package family surface mount SMD signal conditioning impedance buffering input common-mode range output current supply voltage
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ