Analog Devices

MAX232CEAWE+T - 2/2 RS-232 Transceiver | Analog Devices

MPN: MAX232CEAWE+T ✓ فعال
+5 V Vdss 16-SOIC Package
حداقل سفارش: 1 |

MAX232CEAWE+T نمای کلی

The Analog Devices MAX232CEAWE+T is a 2/2 full RS-232 transceiver with one driver and one receiver implemented in each direction, a 16-SOIC package, and an operating temperature range of -40°C to +125°C. The device is powered from +5 V and is intended for translating logic-level digital signals to and from RS-232 voltage levels.

An RS-232 transceiver is an interface IC that combines drivers and receivers for serial data communication. The driver converts a logic-level input into the bipolar voltage signaling used by RS-232, while the receiver converts a bipolar RS-232 input into a logic-level output. As a full-duplex 2/2 device, the MAX232CEAWE+T supports two transmit channels and two receive channels in one package.

Its principal features include two RS-232 drivers, two RS-232 receivers, operation from a +5 V supply, and operation from -40°C to +125°C. The extended temperature range makes the device suitable for industrial equipment, control systems, instrumentation, and communications equipment that must operate across a broad environmental range. The 16-SOIC package supports conventional surface-mount PCB assembly.

The MAX232 family combines a dual RS-232 driver and dual receiver with charge-pump voltage generation, allowing the interface to produce RS-232 levels from a single positive supply. Because this is an integrated transceiver, a system can use fewer discrete interface components than a design composed of separate drivers, receivers, and level-shifting circuits. Charge-pump capacitors and supply-decoupling components remain external to the IC.

Typical uses include serial service ports, industrial controllers, data-acquisition equipment, test and measurement instruments, and embedded systems that communicate with RS-232 equipment. The two-driver and two-receiver arrangement is useful for point-to-point links where both ends can transmit and receive. A transceiver does not define the serial baud rate or protocol framing; those functions are handled by the host UART and application firmware.

For PCB implementation, place the required charge-pump and bypass capacitors close to their associated pins, route the RS-232 driver outputs as impedance-controlled interfaces, and keep switching or high-current paths away from receiver inputs. Confirm the logic levels of the attached UART before connecting the transceiver because RS-232 voltage levels are not directly compatible with TTL or CMOS logic.

This product guide combines the exact MAX232CEAWE+T device information with application guidance, engineering considerations, and clearly qualified drop-in comparison options. It also organizes sourcing, datasheet, replacement, and pinout questions so engineers can evaluate the interface quickly without overlooking temperature-range, package, or supply requirements.

جایگزین‌های drop-in برای MAX232CEAWE+T — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MAX232CEAWE+T (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Supply Voltage, AEC-Q100 Qualification, Data Rate, Function.

Analog Devices
Package: 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width)
Supply Voltage: 4.5 V to 5.5 V
Data Rate: 200 kbps
مقایسه با MAX232CEAWE+T →
Analog Devices
Package: 16-pin Narrow SOIC (SOIC-N-16)
Data Rate: 120 kb/s
Function: RS-232 Line Driver/Receiver (Transceiver)
مقایسه با MAX232CEAWE+T →
Analog Devices
Package: 16-pin SOIC
Supply Voltage: 4.5 V to 5.5 V
AEC-Q100 Qualification: not_applicable
مقایسه با MAX232CEAWE+T →

MAX232ESE+T

✅ جایگزین مستقیم
Analog Devices
📦 16-SOIC
RS-232 transceiver interface IC · 2 drivers and 2 receivers · 4.5 V to 5.5 V · 120 kbps · EIA/TIA-232E and CCITT V.28 · V.28 and V.24 · On-chip capacitive voltage generator · 16 pins

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX232CSE+T

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Analog Devices
📦 16-SOIC
RS-232 Line Driver/Receiver (Transceiver) · 2 · 2 · RS-232 (EIA/TIA-232E, V.28/V.24) · 4.5 V to 5.5 V (single +5V supply) · 120 kb/s · ±7.5 V minimum (typical ±9 V) into 3 kΩ load · ±30 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX232ASE+T

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 16-SOIC
Same 16-pin footprint and 2/2 RS-232 configuration; the ordering suffix identifies a different grade, with no package-pin-count change

📋 جایگزین مرجع (خارج از کاتالوگ)

MAX232AESE+T

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 16-SOIC
Same 16-SOIC footprint and MAX232 2/2 function; the suffix denotes a distinct device grade rather than a different package

📋 جایگزین مرجع (خارج از کاتالوگ)

MAX232ACSE+T

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Analog Devices
📦 16-SOIC
RS-232 Transceiver (2 Driver / 2 Receiver) · 200 kbps · 4.5 V to 5.5 V · 2 · 2 · Full · ±30 V (HBM ESD tolerance on RS-232 inputs) · 0 °C to +70 °C (C grade)

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX232CEAWE+T مشخصات

Product Type 2/2 full RS-232 transceiver
Transmitter Configuration 2 transmitters
Receiver Configuration 2 receivers
Interface Standard RS-232
ولتاژ تغذیه +5 V
محدوده دمای کاری -40°C to +125°C
بسته‌بندی 16-SOIC
تعداد پایه 16 pins
نوع نصب Surface mount
Channel Direction Full duplex
Driver and Receiver Count 2 drivers and 2 receivers
وضعیت RoHS unknown
REACH Status unknown
AEC-Q100 Qualification unknown

راهنمای پیکربندی پین MAX232CEAWE+T 16-soic

پیکربندی پین برای MAX232CEAWE+T (پکیج 16-soic). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 16-soic برای MAX232CEAWE+T

داده پین‌آوت تفصیلی موجود نیست برای MAX232CEAWE+T.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MAX232CEAWE+T مناسب است برای 6 کاربردs: Industrial Serial Control Interfaces, Data Acquisition Equipment, Test and Measurement Instruments, Serial Service and Configuration Ports, Networking and Communications Equipment, Embedded System Debug Interfaces.

🏭

Industrial Serial Control Interfaces

The MAX232CEAWE+T fits industrial controllers that require a compact, temperature-tolerant RS-232 interface. Its two drivers and two receivers support bidirectional point-to-point communication, while the -40°C to +125°C operating range suits equipment deployed across factory, process, and environmental-control environments. The +5 V supply and 16-SOIC package simplify integration into surface-mount control hardware. Connect the transceiver between the host UART and an external RS-232 connector, and place the manufacturer's recommended charge-pump and bypass capacitors close to their pins. Validate the UART logic levels, data rate, grounding, and protection requirements before releasing the PCB.

🖥️

Data Acquisition Equipment

The MAX232CEAWE+T can provide a standard serial control channel between a data-acquisition instrument and a host computer. The integrated 2/2 arrangement allows the instrument to transmit commands and status while receiving configuration data over one RS-232 link. Its broad -40°C to +125°C range supports laboratory and industrial instrumentation, and the 16-SOIC package leaves more board area than larger discrete driver-receiver implementations. Use the manufacturer reference circuit for charge-pump capacitance and supply bypassing, and add the connector-level transient protection required by the installation environment.

🔧

Test and Measurement Instruments

For test and measurement instruments, the MAX232CEAWE+T offers a compact way to add a full-duplex RS-232 management port. Two transmitter channels can carry commands, calibration data, and results, while two receiver channels support host configuration and remote control traffic. The -40°C to +125°C range covers demanding industrial test environments, while +5 V operation simplifies power architecture. Keep sensitive analog and measurement sections separated from the RS-232 driver return currents, and verify whether the end product requires galvanic isolation, shield termination, or additional surge protection.

🧩

Serial Service and Configuration Ports

The MAX232CEAWE+T is well suited to service, configuration, and diagnostic ports on embedded and industrial equipment. A host can transmit setup commands and receive status messages through the two bidirectional channels, while the 16-SOIC package supports automated PCB assembly. Its extended -40°C to +125°C range allows use in equipment exposed to varied ambient conditions. The design must include the manufacturer-specified charge-pump capacitors and local supply decoupling, and the cable connector should receive ESD or surge protection appropriate to the exposed environment.

🌐

Networking and Communications Equipment

The MAX232CEAWE+T can be used for legacy RS-232 service channels in communications equipment where a full-duplex control link is required. Its two drivers and two receivers provide multiple serial paths without using separate driver and receiver packages, and its +5 V operation is compatible with conventional embedded logic. The -40°C to +125°C range supports industrial networking equipment. Preserve the separation between the RS-232 domain and other communications domains, observe recommended capacitor placement, and apply connector-level protection because the external cable can introduce transient voltage beyond the transceiver's operating limits.

🔧

Embedded System Debug Interfaces

The MAX232CEAWE+T can serve as a legacy debug or service interface on embedded control boards. Its full-duplex 2/2 arrangement allows a debugger to download commands and receive diagnostic responses through a standardized RS-232 connection. The 16-SOIC footprint is easy to route in a compact design, and operation over -40°C to +125°C supports industrial embedded products. Route driver outputs away from sensitive receiver traces, use a solid ground reference, and confirm the host UART's logic levels. External protection is particularly important when the RS-232 connector is connected to long or unprotected field cables.

What is the MAX232CEAWE+T?
The MAX232CEAWE+T is a 2/2 full RS-232 transceiver from Analog Devices, integrating two transmit drivers and two receive receivers in a 16-SOIC package. According to the manufacturer datasheet, it operates from a +5 V supply across -40°C to +125°C. It converts between digital logic levels and RS-232 signal levels for full-duplex serial communication.
What are the key specifications of MAX232CEAWE+T that engineers should know?
The MAX232CEAWE+T combines two RS-232 drivers and two receivers in a 16-SOIC surface-mount package. According to the manufacturer datasheet, its principal specifications include +5 V operation and a -40°C to +125°C temperature range. Maximum data rate, logic thresholds, driver voltage levels, and recommended capacitor values must be taken from the manufacturer's electrical-characteristics and application-information sections before final design release.
What is the operating temperature range of MAX232CEAWE+T?
The MAX232CEAWE+T operates from -40°C to +125°C. This extended range is stated in the Mouser product listing for the exact +T ordering code and is suitable for industrial, instrumentation, and control applications. The manufacturer datasheet remains the controlling document for temperature-specific electrical limits and any derating requirements.
What package does the MAX232CEAWE+T use?
The MAX232CEAWE+T is supplied in a 16-SOIC surface-mount package. The package designation and pin count are identified in the exact-part distributor records. Its 16-pin SOIC footprint must be compared with the PCB land pattern and pin assignments in the manufacturer pin description table before a schematic or board layout is released.
Where can I download the MAX232CEAWE+T datasheet PDF?
The MAX232CEAWE+T datasheet is available through the Analog Devices MAX232 product documentation. Use the manufacturer PDF for the electrical characteristics, charge-pump capacitor requirements, pin description, and typical application circuit. The product also appears in the exact-part distributor records linked from this page, which provide an additional route to manufacturer documentation.
Where can I find the MAX232CEAWE+T pinout?
The MAX232CEAWE+T pinout is defined by the 16-pin pin-description and connection diagrams in the manufacturer datasheet. Use that diagram to assign the two driver inputs, two receiver outputs, supply pins, ground connections, and charge-pump capacitor nodes. Do not derive PCB connections from the package drawing alone because the functional pin names must match the exact device revision.
Where to buy MAX232CEAWE+T online?
The MAX232CEAWE+T can be requested through the Request a Quote form on this page. The exact +T ordering code is listed for a 16-SOIC RS-232 transceiver by multiple authorized distribution records, but current stock, lot traceability, and delivery commitments should be confirmed during quotation. The form is the appropriate route for volume and production requirements.
What is the price of MAX232CEAWE+T?
Current price and quantity-break availability for the MAX232CEAWE+T are handled through the Request a Quote form on this page. The exact-part listings do not expose a verifiable quantity-price table in the information available for this record. Submit the required quantity, target date, and shipment location so a current quotation can be prepared.
What is the lead time for MAX232CEAWE+T?
The current lead time for MAX232CEAWE+T should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, inventory, date code, packaging, and manufacturing schedule, so a general claim would not represent a firm supply commitment. Request the production schedule and available lot information when placing the order.
Is MAX232CEAWE+T in stock?
Stock status should be requested through the Request a Quote form on this page. The exact MPN appears in active distributor listings, but that alone does not establish a current quantity available for every order size. A quotation response can confirm live inventory, allocation, and expected fulfillment for the required production quantity.
MAX232CEAWE+T vs MAX232ESE+T - which is better for industrial equipment?
The MAX232CEAWE+T and MAX232ESE+T are the closest same-family options identified for a 16-SOIC comparison, but their exact temperature grades and electrical limits must be checked in the manufacturer datasheets. According to the manufacturer information, the MAX232CEAWE+T supports -40°C to +125°C. Choose it when that grade and its exact ordering code meet the production requirements.
What is the difference between MAX232CEAWE+T and MAX232ESE+T?
Both devices belong to the MAX232 family and are associated with 2/2 RS-232 operation in a 16-SOIC package. The exact distinction is their ordering suffix and corresponding temperature or qualification grade. Compare the manufacturer ordering guide and electrical tables for the exact suffixes before declaring either part a substitute for an existing production design.
When should I choose MAX232CEAWE+T over MAX232ESE+T?
Choose the MAX232CEAWE+T when its documented +5 V operation, -40°C to +125°C range, 16-SOIC footprint, and exact ordering code satisfy the design. Choose the MAX232ESE+T when its manufacturer-defined grade and sourcing conditions are preferable for the target application. PCB reuse still requires confirmation of every pin function, capacitor connection, and electrical limit.
Is MAX232CEAWE+T suitable for industrial serial equipment?
The MAX232CEAWE+T is suitable for many industrial serial interfaces because it operates from -40°C to +125°C and provides two drivers and two receivers. Its +5 V supply and 16-SOIC package simplify implementation in surface-mount control and instrumentation products. Verify data rate, logic thresholds, ESD requirements, isolation needs, and isolation between interface circuits.
What can replace the MAX232CEAWE+T?
The MAX232ESE+T is the primary same-family replacement candidate identified by the cross-reference results, while several MAX232 ordering variants share the 16-SOIC format. A true drop-in decision requires identical pin functions, supply requirements, charge-pump connections, logic thresholds, and acceptable temperature performance. Use the manufacturer ordering guide to confirm the exact suffix before replacing the installed part.
What is the best equivalent for MAX232CEAWE+T?
The best equivalent is the same-family MAX232 ordering variant whose manufacturer datasheet confirms the same 16-SOIC pinout, electrical behavior, and required temperature grade. The MAX232ESE+T is the closest candidate identified in the replacement search, but it should not be treated as a confirmed substitute without suffix-level comparison. PCB and qualification requirements take priority over nominal family similarity.

داده‌های مرجع مهندسی برای MAX232CEAWE+T — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the MAX232CEAWE+T for a +5 V, full-duplex RS-232 interface that requires two transmit channels and two receive channels, particularly in equipment operating across -40°C to +125°C. The MAX232ESE+T is the closest replacement candidate identified by the cross-reference search and is worth checking when sourcing or grade alignment favors that suffix, but its exact temperature and qualification limits must be confirmed. The other listed MAX232 16-SOIC variants provide additional same-family sourcing options; verify the ordering guide and electrical tables before substituting them. This part is preferable when a combined transceiver reduces external driver and receiver count. It is not preferable when the design needs a different supply voltage, a larger data rate, another interface standard, galvanic isolation, or a package already committed to another footprint.

مقایسه با جایگزین‌ها

پارامتر این محصول MAX232ESE+T MAX232CSE+T MAX232ASE+T MAX232AESE+T MAX232ACSE+T
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Transceiver Configuration 2/2 full RS-232 transceiver 2/2 full RS-232 transceiver 2/2 full RS-232 transceiver 2/2 full RS-232 transceiver 2/2 full RS-232 transceiver 2/2 full RS-232 transceiver
Driver Count 2 2 2 2 2 2
Receiver Count 2 2 2 2 2 2
Supply Voltage +5 V +5 V +5 V +5 V +5 V +5 V
Surface-Mount Footprint 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Special Features Integrated dual driver and dual receiver Integrated dual driver and dual receiver Integrated dual driver and dual receiver Integrated dual driver and dual receiver Integrated dual driver and dual receiver Integrated dual driver and dual receiver

تفاوت‌های کلیدی

  • Exact +T ordering code with extended-temperature operation (در مقابلMAX232ESE+T)
  • Two transmitters and two receivers in one 16-SOIC package (در مقابلMAX232CSE+T)
  • Single-package integration reduces separate driver and receiver count (در مقابلMC1489NE4)

یادداشت‌های طراحی

Place the charge-pump capacitors and local supply-decoupling capacitor close to their associated MAX232 pins using the manufacturer layout and capacitance recommendations. Keep the driver output paths away from receiver inputs and sensitive analog circuitry. Route the two RS-232 channels as impedance-controlled interfaces, use a continuous ground reference, and place any connector protection close to the connector entry point.

Do not assume that the UART logic pins can directly connect to an external RS-232 connector; the MAX232 performs the required level translation. Verify input thresholds, output levels, polarity, timing, and data rate against the attached UART. Also confirm that the ordering suffix supplies the required temperature grade and that every PCB connection follows the exact pin-description diagram for the selected MPN.

Treat each RS-232 channel as a balanced, bipolar interface rather than a low-voltage single-ended signal. Terminate the cable and shield according to the connector and system grounding strategy, avoid long unprotected board traces, and use ESD or surge protection at exposed connectors. Keep ground current from external cables out of sensitive measurement paths to prevent common-mode disturbance.

The MAX232CEAWE+T is specified for -40°C to +125°C, but board temperature, copper area, airflow, and nearby heat sources must be checked against the manufacturer's maximum operating and package-temperature limits. Use the exact electrical characteristics for the selected suffix rather than assuming that every grade has identical limits across temperature.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

Compliance declarations were not identified in the exact-part records and must be confirmed using the manufacturer's current declaration or product documentation.

جستجوهای مرتبط

MAX232CEAWE+T datasheet MAX232CEAWE+T pinout MAX232CEAWE+T datasheet pdf MAX232CEAWE+T equivalent MAX232CEAWE+T replacement MAX232CEAWE+T price MAX232CEAWE+T stock Analog Devices MAX232CEAWE+T MAX232CEAWE+T 16-SOIC MAX232CEAWE+T RS-232 transceiver MAX232CEAWE+T industrial interface MAX232CEAWE+T vs MAX232ESE+T

قطعات و اصطلاحات مرتبط

Analog Devices MAX232CEAWE+T MAX232ESE+T MAX232CSE+T MAX232ASE+T MAX232AESE+T MAX232ACSE+T RS-232 RS-232 transceiver full-duplex interface serial interface IC driver receiver charge-pump voltage conversion 16-SOIC SOIC package family surface-mount technology +5 V power supply -40°C to +125°C industrial control equipment data-acquisition equipment test and measurement instruments serial service port legacy serial communications
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ