Texas Instruments

MAX3221IDBG4 - Single RS-232 Transceiver | Texas Instruments

MPN: MAX3221IDBG4 ✓ فعال
3 V to 5.5 V Vdss 16-SSOP Package Free Memory
حداقل سفارش: 1 |

MAX3221IDBG4 نمای کلی

The Texas Instruments MAX3221IDBG4 is a single-channel RS-232 line driver and receiver, or transceiver, designed for asynchronous serial communication. It operates from a 3 V to 5.5 V supply, supports data rates up to 250 kbit/s, and provides ±15 kV human-body-model ESD protection on the serial-port connection pins, including ground. The device is packaged in a 16-pin SSOP.

An RS-232 transceiver is an interface IC that converts logic-level signals from a host, controller, or embedded processor into RS-232 voltage levels, while converting incoming RS-232 signals back into CMOS-compatible logic. This device belongs to the interface IC hierarchy, combining a line driver, line receiver, and dual charge-pump voltage-conversion circuitry in one package. It is designed to bridge modern digital electronics with legacy RS-232 equipment.

The MAX3221IDBG4 provides one driver and one receiver, making it appropriate for point-to-point serial links, industrial equipment, data-acquisition systems, service interfaces, and embedded control products. Its 3 V to 5.5 V operating range allows operation from both 3.3 V and 5 V systems. The 250 kbit/s data rate supports moderate-speed serial communication while the integrated charge pumps generate the bipolar voltage levels required by RS-232 without requiring a separate negative supply.

The ±15 kV ESD rating applies to the human-body model and is intended to improve protection when cables are connected to exposed communication ports. This protection does not eliminate the need for appropriate system-level grounding, shielding, or surge-protection design. The device also uses charge-pump circuitry, so power-supply bypass capacitors and careful layout around the flying-capacitor connections remain important for stable operation.

Typical uses include service-console interfaces, industrial control panels, instrumentation, point-of-sale equipment, and systems that retain an RS-232 port while using a modern microcontroller. Its single-channel architecture minimizes board area compared with multi-channel transceivers when only one serial port is required.

When selecting this interface, verify the connector's signal polarity, the host-side logic levels, the required data rate, and the grounding arrangement. Place the charge-pump capacitors and supply bypass capacitors close to their specified pins, and observe the recommended connector and cable-routing practices for exposed RS-232 ports. This page combines device specifications, sourcing guidance, compatible alternatives, and practical interface-design notes for engineers evaluating the MAX3221IDBG4.

جایگزین‌های drop-in برای MAX3221IDBG4 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MAX3221IDBG4 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Product Type, Supply Voltage Range, Maximum Data Rate, Number of Drivers.

Analog Devices
Package: 16-pin SSOP
Product Type: RS-232 transceiver
Supply Voltage Range: +3 V to +5.5 V
مقایسه با MAX3221IDBG4 →
Texas Instruments
Package: 16-pin SSOP
Product Type: Single-channel RS-232 line driver/receiver
Maximum Data Rate: 250 kbps
مقایسه با MAX3221IDBG4 →
Texas Instruments
Package: 16-pin SSOP (DB)
Product Type: Single-channel RS-232 line driver/receiver transceiver
Maximum Data Rate: 250 kbps
مقایسه با MAX3221IDBG4 →

MAX3221IDB

✅ جایگزین مستقیم
Texas Instruments
📦 16-SSOP
Single-channel RS-232 line driver/receiver · 3 V to 5.5 V · 250 kbps · ±15 kV pin to pin · 1 driver · 1 receiver · Dedicated enable pin · Dual charge-pump circuit

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX3221MDBREP

✅ جایگزین مستقیم
Texas Instruments
📦 16-SSOP
Single-channel RS-232 line driver/receiver transceiver · 1 · 1 · 3 V to 5.5 V · 250 kbps · ±15 kV using the human body model · Dual charge-pump circuit · Accepts 5 V logic input with a 3.3 V supply

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX3221CAE+

✅ جایگزین مستقیم
Analog Devices
📦 16-SSOP
RS-232 transceiver · 1 transmitter and 1 receiver · +3 V to +5.5 V · 1 µA · 16-pin SSOP · Surface mount · 1 driver · 1 receiver

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX3221IDBG4 مشخصات

Device Type RS-232 line driver/receiver transceiver
Number of Drivers 1
Number of Receivers 1
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbit/s
Protocol RS-232
ESD Protection ±15 kV human-body model
ESD Protected Pins Serial-port connection pins, including GND
Compliance TIA/EIA-232-F and ITU V.28 requirements
Voltage Conversion Dual charge-pump circuit
بسته‌بندی 16-SSOP
Package Width 5.30 mm
Package Body Width 0.209 inch
نوع نصب Surface mount
Lead-Free Status Lead-free
Green Product Yes
Antimony and Bromide Free
دسته‌بندی Integrated Circuits > Interface ICs > RS-232, RS-422, RS-485 Interface ICs

راهنمای پیکربندی پین MAX3221IDBG4 0.209 inch

پیکربندی پین برای MAX3221IDBG4 (پکیج 0.209 inch). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 0.209 inch برای MAX3221IDBG4

داده پین‌آوت تفصیلی موجود نیست برای MAX3221IDBG4.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MAX3221IDBG4 مناسب است برای 6 کاربردs: Industrial Control Panels, Data-Acquisition Equipment, Point-of-Sale Terminals, Instrument Service Interfaces, Embedded Serial Service Ports, Remote Monitoring and Telemetry.

🏭

Industrial Control Panels

The MAX3221IDBG4 suits industrial control panels that retain an RS-232 service or configuration port while using a modern 3.3 V or 5 V controller. Its single driver and single receiver provide bidirectional signal conversion in a 16-SSOP package, while 250 kbit/s operation is sufficient for configuration consoles, parameter transfer, and supervisory commands. The ±15 kV human-body-model ESD protection on the serial connection pins adds useful defense for a cable-accessible port, although the enclosure, grounding, and cable routing still determine overall surge robustness. Use a low-noise bypass capacitor at the supply pins and place the charge-pump capacitors exactly as shown in the manufacturer layout to avoid converter noise or unstable startup.

🖥️

Data-Acquisition Equipment

For laboratory and industrial data-acquisition equipment, the MAX3221IDBG4 provides a compact interface between a controller and a legacy RS-232 instrument. The 3 V to 5.5 V supply range supports both 3.3 V embedded processors and 5 V control logic, while the 250 kbit/s limit accommodates many command and measurement-data links. The single-channel arrangement reduces footprint and power-system complexity when only one port is needed. Its integrated dual charge pump generates the required RS-232 levels, eliminating a separate negative rail. Place the bypass and charge-pump capacitors close to the device, route the interface ground with the signal return, and verify that the connected instrument uses compatible RS-232 voltage levels and signal polarity.

🖥️

Point-of-Sale Terminals

The MAX3221IDBG4 can provide a compact RS-232 connection between a point-of-sale terminal or peripheral and a legacy printer, scanner, or customer-display device. One driver and one receiver cover the required single-port conversion, and the 16-SSOP package preserves board area in compact equipment. Its 3 V to 5.5 V operating range allows use with common embedded system supplies, while the 250 kbit/s data rate is more than adequate for many peripheral-control protocols. The ±15 kV human-body-model rating is valuable for exposed service connectors. Design the connector-side ground as a low-impedance return path, use the manufacturer-specified capacitor values, and verify whether the peripheral requires hardware or software flow control.

🔧

Instrument Service Interfaces

The MAX3221IDBG4 is appropriate for a service interface on test and measurement instruments where technicians connect a computer or service controller through RS-232. The device's one-driver, one-receiver configuration supports bidirectional command and response traffic, and 250 kbit/s operation supports common service-port baud rates. Its low-voltage supply range simplifies connection to 3.3 V and 5 V instrument control sections. Integrated charge-pump circuitry removes the need for a separate negative supply, while ±15 kV human-body-model ESD protection helps manage incidental cable-contact transients. Keep the RS-232 traces short and away from sensitive analog nodes, connect the interface ground correctly, and use the datasheet capacitor arrangement to preserve signal and power integrity.

🧩

Embedded Serial Service Ports

The MAX3221IDBG4 allows a microcontroller-based product to retain a wired RS-232 service port for configuration, diagnostics, and firmware maintenance. Its 16-SSOP package and single-channel architecture are useful where board space is limited but one legacy serial interface is essential. The MAX3221IDBG4 accepts a 3 V to 5.5 V supply and supports communication at up to 250 kbit/s, matching many embedded debug and configuration protocols. Its dual charge-pump circuitry produces the bipolar RS-232 levels internally. Place the flying capacitors and supply bypass capacitor directly beside the associated pins, keep the charge-pump loop compact, and isolate the connector ground from noisy power-return paths where the system architecture requires separate signal and power grounds.

🌐

Remote Monitoring and Telemetry

The MAX3221IDBG4 can be used in remote monitoring equipment that sends configuration commands or telemetry over a wired RS-232 link. Its 250 kbit/s data rate supports moderate-speed telemetry bursts, while the single driver and receiver reduce component count and board area compared with a multi-channel interface. The 3 V to 5.5 V supply range allows operation from either 3.3 V or 5 V telemetry controllers, and the internal charge pumps eliminate a separate negative supply. The ±15 kV human-body-model ESD rating on serial connection pins is especially relevant when the cable reaches beyond an enclosed enclosure. Use shielded cable where appropriate, connect signal ground consistently at the interface, and verify surge requirements beyond human-body-model ESD with an external protection network.

What is the MAX3221IDBG4?
The MAX3221IDBG4 is a single-channel RS-232 line driver and receiver from Texas Instruments. According to the manufacturer datasheet, it combines one driver, one receiver, and a dual charge-pump circuit in a 16-SSOP package. It converts between CMOS-compatible logic levels and RS-232 voltage levels for asynchronous serial links operating up to 250 kbit/s from a 3 V to 5.5 V supply.
What is the operating voltage of MAX3221IDBG4?
The MAX3221IDBG4 operates from 3 V to 5.5 V. According to the Texas Instruments datasheet, this supply range permits use with both 3.3 V and 5 V host systems. The internal charge-pump circuitry develops the bipolar voltage levels required by the RS-232 interface, while the logic-side supply remains compatible with common microcontroller and embedded-platform rail voltages.
What is the maximum data rate of MAX3221IDBG4?
The MAX3221IDBG4 supports data rates up to 250 kbit/s. According to the Texas Instruments datasheet, the device uses one line driver and one line receiver for full-duplex-style RS-232 signal conversion. This rate is appropriate for service ports, control consoles, data-acquisition equipment, and other moderate-speed serial interfaces that use asynchronous RS-232 communication.
Where can I download the MAX3221IDBG4 datasheet PDF?
The MAX3221IDBG4 datasheet PDF is available through the manufacturer's product documentation and the linked technical-document page. According to the Texas Instruments datasheet, the document describes the 3 V to 5.5 V supply range, 250 kbit/s operation, ±15 kV human-body-model ESD protection, and compliance with TIA/EIA-232-F and ITU V.28 requirements. Use the pin-description table in that document for final PCB assignments.
Where can I find the MAX3221IDBG4 pinout?
Use the pin-description table and package drawing in the Texas Instruments MAX3221 datasheet to locate the MAX3221IDBG4 pinout. The device uses a 16-SSOP package with one RS-232 driver, one receiver, supply connections, ground, enable-related functions, and charge-pump capacitor connections. Preserve every required bypass and charge-pump capacitor connection when assigning the PCB footprint.
Is the MAX3221IDBG4 drop-in compatible with MAX3221IDB?
The MAX3221IDB is a same-family, same-manufacturer candidate for the MAX3221IDBG4, but final substitution still requires checking the exact suffix and package drawing against the approved BOM. According to the manufacturer datasheet, both devices are single RS-232 transceivers with dedicated enable and ±15 kV human-body-model ESD protection. Confirm operating-temperature, marking, and qualification requirements before releasing a replacement.
What is the best drop-in replacement for MAX3221IDBG4?
The MAX3221IDB is the closest same-family drop-in candidate identified for the MAX3221IDBG4 because it provides the same single-driver, single-receiver RS-232 architecture and a corresponding 16-SSOP form factor. According to Texas Instruments documentation, the MAX3221IDB includes a dedicated enable pin and ±15 kV human-body-model ESD protection. Verify the exact ordering code and temperature grade before substitution.
What can replace MAX3221IDBG4?
The MAX3221IDB can replace the MAX3221IDBG4 when its exact ordering suffix, temperature grade, and 16-SSOP footprint meet the system requirements. The MAX3221MDBREP and MAX3221CAE are additional same-family candidates to evaluate because they use the same single-channel RS-232 architecture. A replacement should not be approved solely from the family name; compare pin functions, supply limits, data rate, and qualification status.
Are MAX3221IDBG4 and MAX3221CAE equivalent?
The MAX3221IDBG4 and MAX3221CAE are closely related single-channel RS-232 transceivers, but they should be treated as conditional alternatives rather than automatically identical parts. According to the Texas Instruments family documentation, the MAX3221CAE includes an automatic shutdown function and operates from 3 V to 5.5 V. Confirm enable behavior, shutdown timing, package dimensions, and temperature grade before treating it as a drop-in replacement.
Is MAX3221IDBG4 suitable for industrial equipment?
The MAX3221IDBG4 is suitable for many industrial and embedded serial interfaces because it provides ±15 kV human-body-model ESD protection and operates from 3 V to 5.5 V. According to the Texas Instruments datasheet, it supports 250 kbit/s communication and TIA/EIA-232-F and ITU V.28 requirements. Industrial suitability still depends on the required temperature grade, environmental qualification, grounding, and enclosure-level surge requirements.
Where can I buy MAX3221IDBG4 online?
Use the Request a Quote form on this page to request MAX3221IDBG4 availability, current unit pricing, and order scheduling. The Texas Instruments product documentation identifies the device as a 16-SSOP RS-232 transceiver with a 3 V to 5.5 V supply range. The request should include your required quantity, packing preference, target date, and any automotive or industrial qualification requirements.
What is the price of MAX3221IDBG4?
Current MAX3221IDBG4 pricing is handled through the Request a Quote form on this page. The form accepts the required quantity and order details so the quote can reflect current market availability, currency, and fulfillment requirements. For engineering comparison, the key baseline is a 1-driver, 1-receiver RS-232 transceiver in a 16-SSOP package operating from 3 V to 5.5 V.
What is the lead time for MAX3221IDBG4?
Submit a MAX3221IDBG4 request through the Request a Quote form on this page to obtain a lead-time commitment for the required quantity. When requesting the quote, state the desired delivery date, tube or tape-and-reel packing requirement, and target date. Texas Instruments identifies the device as a 16-SSOP RS-232 transceiver, but a production schedule should always be confirmed for the actual order quantity.
Is MAX3221IDBG4 in stock?
Current MAX3221IDBG4 stock should be confirmed through the Request a Quote form on this page. Include the required quantity and preferred packing in the request so the order response can account for factory inventory, distribution availability, and production scheduling. The device is listed by Texas Instruments as a 16-SSOP, single-channel RS-232 transceiver for 3 V to 5.5 V systems.
What are the key specifications of MAX3221IDBG4 that engineers should know?
The MAX3221IDBG4 combines one RS-232 driver and one receiver, a 3 V to 5.5 V supply range, 250 kbit/s operation, and ±15 kV human-body-model ESD protection in a 16-SSOP package. According to the Texas Instruments datasheet, the serial-port connection pins, including ground, receive ESD protection and the device meets TIA/EIA-232-F and ITU V.28 requirements. Its dual charge-pump architecture eliminates the need for a separate negative supply.

داده‌های مرجع مهندسی برای MAX3221IDBG4 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the MAX3221IDBG4 when a compact system needs one 3.3 V or 5 V RS-232 port, up to 250 kbit/s of data transfer, and ±15 kV human-body-model ESD protection on serial connection pins. Select MAX3221IDB when its exact suffix and qualification status satisfy the production requirements; it shares the same fundamental single-channel architecture and 16-SSOP format. Consider MAX3221MDBREP for another same-family 16-SSOP option, but verify its ordering code and environmental requirements. Choose MAX3221CAE when automatic shutdown is useful and the associated behavior change is acceptable. For any substitution, confirm pin functions, package dimensions, supply limits, enable or shutdown behavior, temperature grade, and cable-side protection requirements rather than relying only on the family name.

مقایسه با جایگزین‌ها

پارامتر این محصول MAX3221IDB MAX3221MDBREP MAX3221CAE
Package 16-SSOP 16-SSOP 16-SSOP 16-SSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Device Type Single RS-232 transceiver Single RS-232 transceiver Single RS-232 transceiver Single RS-232 transceiver
Number of Drivers 1 1 1 1
Number of Receivers 1 1 1 1
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbit/s 250 kbit/s 250 kbit/s 250 kbit/s
ESD Protection ±15 kV human-body model ±15 kV human-body model ±15 kV human-body model ±15 kV human-body model
Charge-Pump Circuit Dual charge-pump circuit Dual charge-pump circuit Dual charge-pump circuit Dual charge-pump circuit

تفاوت‌های کلیدی

  • Compact single-channel RS-232 conversion (در مقابلMAX3221CAE)
  • Direct same-family interface architecture (در مقابلMAX3221IDB)
  • Single-rail RS-232 level generation (در مقابلMAX3221MDBREP)

یادداشت‌های طراحی

Place the charge-pump capacitors and the supply bypass capacitor directly beside their associated MAX3221IDBG4 pins. Keep these loops compact, use the shortest practical ground return, and avoid routing the high-current charge-pump paths beneath sensitive analog or communication lines. The 3 V to 5.5 V operating range supports common system rails, but stable capacitor connections are essential for clean charge-pump operation and reliable RS-232 level generation.

Do not treat the ±15 kV human-body-model ESD rating as complete protection against every cable-borne surge. Connect the interface ground with the RS-232 signal return, use a suitable enclosure and cable strategy, and add external protection when the connector can encounter industrial surge or discharge conditions. Also verify whether the connected equipment requires hardware flow control or a particular RS-232 signal polarity.

Keep connector-side RS-232 traces separated from sensitive board areas and route them away from clocks, switching regulators, and high-current return paths. Use a continuous reference plane where practical, maintain return continuity beneath the interface, and terminate unused inputs according to the manufacturer recommendations. Before releasing a cross-reference design, compare the complete pin descriptions and physical drawings of the exact replacement ordering code.

اطلاعات انطباق

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Yes
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The MAX3221IDBG4 listing identifies lead-free status and a green product without antimony and bromide. RoHS compliance is shown in the component comparison information; REACH, halogen-free status, and conflict-minerals status are not confirmed.

تاریخ تأیید داده‌ها: 2026-11-09 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MAX3221IDBG4 datasheet MAX3221IDBG4 datasheet pdf MAX3221IDBG4 pinout MAX3221IDBG4 equivalent MAX3221IDBG4 replacement MAX3221IDBG4 cross reference MAX3221IDBG4 price MAX3221IDBG4 stock Texas Instruments MAX3221IDBG4 MAX3221IDBG4 16-SSOP MAX3221IDBG4 RS-232 transceiver MAX3221IDBG4 vs MAX3221IDB MAX3221IDBG4 application circuit MAX3221IDBG4 industrial control

قطعات و اصطلاحات مرتبط

Texas Instruments MAX3221IDBG4 MAX3221IDB MAX3221MDBREP MAX3221CAE RS-232 RS-232 transceiver line driver line receiver interface IC semiconductor dual charge-pump circuit TIA/EIA-232-F ITU V.28 ESD protection human-body model 250 kbit/s 3 V to 5.5 V supply 16-SSOP SSOP package family surface-mount package serial communication industrial control data-acquisition equipment
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ