Texas Instruments

MAX3232IPWRG4 - 3-5.5V RS-232 Transceiver | Texas Instruments

MPN: MAX3232IPWRG4 ✓ فعال
3 V to 5.5 V Vdss 16-pin TSSOP Package
حداقل سفارش: 1 |

MAX3232IPWRG4 نمای کلی

The Texas Instruments MAX3232IPWRG4 is a 3 V to 5.5 V dual RS-232 line driver and receiver with a 16-pin TSSOP package, two transmit channels, two receive channels, and ±15-kV ESD protection on the serial-port terminals. It is designed to connect an asynchronous communication controller to an RS-232 connector while operating from a single low-voltage supply.

An RS-232 transceiver is a semiconductor interface that converts logic-level signals into RS-232 line levels and converts received line-level signals back into CMOS logic. The MAX3232 belongs to the interface IC and RS-232 transceiver hierarchy, using an on-chip dual charge-pump circuit to generate the positive and negative voltages required by true RS-232 operation. This makes it suitable for industrial control, instrumentation, point-of-sale equipment, and legacy serial-port systems.

Key features include a 3 V to 5.5 V supply range, full-duplex operation with two drivers and two receivers, and data rates up to 250 kbps according to the manufacturer product information. The device also provides ±15-kV ESD protection on the serial-port connection terminals and uses external 0.1 µF charge-pump capacitors. Its low-voltage operation reduces the power burden compared with traditional ±5 V or ±12 V RS-232 implementations.

The internal charge-pump circuitry generates the bipolar voltages required to meet TIA/EIA-232-F electrical requirements. Because the charge pump switches internally, PCB layout must keep the charge-pump capacitors close to their designated pins and preserve adequate routing away from sensitive analog or communication circuits. The receiver includes hysteresis, which helps reject noise and prevents excessive output chatter as an input signal crosses the logic threshold.

Typical applications include legacy RS-232 ports on industrial controllers, test and measurement equipment, programmable logic controllers, security systems, and computer peripherals. The part is particularly useful where a modern 3.3 V or 5 V controller must communicate with an RS-232 device through a DB9 or equivalent connector.

The principal design trade-off is that the MAX3232IPWRG4 is a mature RS-232 interface rather than a modern USB-to-serial bridge. It requires external charge-pump capacitors, a suitable connector, and careful treatment of the exposed cable-side pins. Its industrial temperature grade supports equipment intended for a wider operating environment than commercial-temperature parts.

This product record combines manufacturer specifications, exact package information, lifecycle status, source links, and verified substitute information to support component selection. Engineers can use the comparison table and replacement notes to determine whether an alternative preserves the TSSOP-16 footprint, supply range, channel count, and RS-232 operating characteristics.

جایگزین‌های drop-in برای MAX3232IPWRG4 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MAX3232IPWRG4 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Supply Voltage Range, ESD Protection, Maximum Data Rate, Product Type.

Texas Instruments
Package: 16-pin TSSOP (PW)
ESD Protection: ±15 kV
Maximum Data Rate: 250 kbit/s
مقایسه با MAX3232IPWRG4 →
Texas Instruments
Package: 16-TSSOP (0.173 in, 4.40 mm width)
مقایسه با MAX3232IPWRG4 →
Texas Instruments
Supply Voltage Range: 3V to 5.5V
ESD Protection: ±15kV
Maximum Data Rate: 250kbit/s
مقایسه با MAX3232IPWRG4 →
MaxLinear
Supply Voltage Range: +3.0 V to +5.5 V
Product Type: RS-232 transceiver

MAX3232IPWR

✅ جایگزین مستقیم
Texas Instruments
📦 16-pin TSSOP
Dual RS-232 line driver and receiver · 2 channels · 2 channels · 3V to 5.5V · 250kbit/s · ±15kV · 5V logic · 0.1µF

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX3232EIPWG4

✅ جایگزین مستقیم
Texas Instruments
📦 16-pin TSSOP
RS-232 Line Driver/Receiver · 2 · 2 · 3 V to 5.5 V · 250 kbps · +/-15 kV · +/-8 kV · +/-15 kV

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX3232EIPWG4

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Texas Instruments
📦 16-pin TSSOP
RS-232 Line Driver/Receiver · 2 · 2 · 3 V to 5.5 V · 250 kbps · +/-15 kV · +/-8 kV · +/-15 kV

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX3232CPWR

✅ جایگزین مستقیم
Texas Instruments
📦 16-pin TSSOP
Dual RS-232 line driver/receiver transceiver · 3 V to 5.5 V · 250 kbit/s · 2 · 2 · ±15 kV · 300 µA · 0.1 µF

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX3232CPWG4

✅ جایگزین مستقیم
Texas Instruments
📦 16-pin TSSOP
2 drivers and 2 receivers · 3 V to 5.5 V · 250 kbit/s · RS-232 · ±15 kV · 16-pin TSSOP, 4.40 mm width · Surface Mount · 4 capacitors, 0.1 µF each

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

SP3232EBEY-L/TR

✅ جایگزین مستقیم
MaxLinear
📦 16-pin SSOP
RS-232 transceiver · 2 drivers · 2 receivers · +3.0 V to +5.5 V · RS-232 · 16-pin TSSOP · Surface mount · 0.1 µF

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX3232IPWRG4 مشخصات

Device Type RS-232 line transceiver
Number of Drivers 2
Number of Receivers 2
Duplex Type Full duplex
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
ESD Protection ±15 kV terminal to terminal
Interface Standard TIA/EIA-232-F
Charge-Pump Architecture Dual charge-pump circuit
External Charge-Pump Capacitors 0.1 µF each
Receiver Hysteresis 300 mV
بسته‌بندی 16-pin TSSOP
Terminal Count 16
نوع نصب Surface mount
محدوده دمای کاری -40 °C to +85 °C

راهنمای پیکربندی پین MAX3232IPWRG4 16-pin tssop

پیکربندی پین برای MAX3232IPWRG4 (پکیج 16-pin tssop). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 16-pin tssop برای MAX3232IPWRG4

داده پین‌آوت تفصیلی موجود نیست برای MAX3232IPWRG4.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MAX3232IPWRG4 مناسب است برای 6 کاربردs: Industrial RS-232 Controller Interface, Programmable Logic Controller Communication, Test and Measurement Equipment, Point-of-Sale and Peripheral Communication, Security and Access-Control Equipment, Embedded Service and Debug Port.

🏭

Industrial RS-232 Controller Interface

The MAX3232IPWRG4 fits industrial controllers that retain RS-232 communication with drives, meters, or service equipment. Its 3- to 5.5-V supply range allows connection to 3.3 V or 5 V controller logic without separate ±12 V interface rails. The dual charge-pump generates compliant positive and negative line voltages, while the two transmitters and two receivers support full-duplex links. Its -40 °C to +85 °C operating range supports industrial enclosures, although connector ratings and system-level thermal rise must also be checked.

🔧

Programmable Logic Controller Communication

The MAX3232IPWRG4 is suitable for PLC communication modules that must translate controller logic into RS-232 signals. A maximum data rate of 250 kbps supports common asynchronous serial configurations, while the full-duplex arrangement permits simultaneous command transmission and status reception. Its single 3- to 5.5-V supply simplifies interface design around modern embedded processors. The four required 0.1 µF capacitors should be placed directly beside their charge-pump pins to reduce switching-loop area and cable-side noise.

🖥️

Test and Measurement Equipment

The MAX3232IPWRG4 can provide a legacy RS-232 port on bench instruments, programmable power supplies, and automated test systems. The 3.3 V compatibility reduces the need for level shifting between the transceiver and modern control logic, while the integrated charge pump supplies the bipolar voltages required by RS-232. The device supports up to 250 kbps, allowing it to match conventional serial-control links. For laboratory equipment, use a suitable isolated or chassis-connected protection strategy at the external connector and verify grounding to avoid introducing noise into measurements.

🖥️

Point-of-Sale and Peripheral Communication

The MAX3232IPWRG4 supports RS-232 links used by point-of-sale terminals, scales, printers, and other commercial peripherals. The two-transmitter, two-receiver configuration allows independent inbound and outbound channels, and the device operates from the 5 V rails commonly present in peripheral equipment. Its 250-kbps maximum rate is more than adequate for many short-distance transaction and configuration links. Cable length, connector grounding, and peripheral-specific protocol requirements should be validated together because the transceiver rating does not remove all RS-232 cable limitations.

🎥

Security and Access-Control Equipment

The MAX3232IPWRG4 can be used in access-control panels and security-system modules that maintain an RS-232 service or configuration port. Its low-voltage operation integrates cleanly with 3.3 V or 5 V system logic, and ±15-kV terminal-to-terminal ESD protection adds useful robustness at an exposed cable-side interface. The industrial temperature range is advantageous in equipment stored in unconditioned spaces. The design should still include connector grounding, surge protection appropriate to the installation, and verified separation between the protected cable interface and sensitive security circuitry.

💻

Embedded Service and Debug Port

The MAX3232IPWRG4 is appropriate for embedded systems that expose an RS-232 configuration, firmware-update, or diagnostic port. It bridges low-voltage CMOS UART signals to true RS-232 levels without requiring the host system to generate bipolar voltages. The dual full-dupplex channels support common transmit-and-receive diagnostic workflows, and 250 kbps is suitable for many bootloaders and console protocols. Firmware should implement appropriate electrical safeguards because the RS-232 transceiver provides logical signaling but does not by itself establish a secure authenticated update channel.

What is the MAX3232IPWRG4 used for?
The MAX3232IPWRG4 is a dual RS-232 transceiver used to connect a 3.3 V or 5 V asynchronous controller to an RS-232 port. According to the Texas Instruments product page, it contains two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection on the serial-port terminals. It is therefore appropriate for industrial controllers, instruments, and other equipment that retain a cable-based RS-232 interface.
What is the operating voltage of MAX3232IPWRG4?
The MAX3232IPWRG4 operates from 3 V to 5.5 V. The manufacturer product information identifies it as a 3- to 5.5-V multichannel RS-232 line driver and receiver, allowing it to interface directly with 3.3 V or 5 V CMOS logic. The internal dual charge-pump generates the bipolar line voltages required for RS-232 transmission from this single low-voltage supply.
What is the MAX3232IPWRG4 data rate?
The MAX3232IPWRG4 supports data rates up to 250 kbps, according to the Texas Instruments device description and the verified component specifications. This rate is suitable for asynchronous RS-232 links used by programmable controllers, test equipment, and industrial peripherals. Signal integrity should still be checked at the connector, especially when long or unshielded cables are involved.
Where can I download the MAX3232IPWRG4 datasheet PDF?
The official MAX3232IPWRG4 datasheet is available through the Texas Instruments product page listed on this page. The product page links the manufacturer documentation and identifies the device as a 3- to 5.5-V RS-232 line driver and receiver with ±15-kV ESD protection. Use the manufacturer document for the final pin description, charge-pump capacitor values, and electrical characteristics before completing the PCB design.
Where can I find the MAX3232IPWRG4 pinout?
The MAX3232IPWRG4 uses a 16-pin TSSOP package, and its pin assignment is documented in the Texas Instruments MAX3232 datasheet. Use the manufacturer pin-description table when assigning driver outputs, receiver inputs, supply pins, ground, and the four external charge-pump capacitors. The verified web results confirm the 16-terminal TSSOP package, but they do not reproduce a pin-by-pin diagram on this page.
Does MAX3232IPWRG4 need external capacitors?
Yes, the MAX3232IPWRG4 requires four external 0.1 µF charge-pump capacitors. Texas Instruments describes the device as a true RS-232 transceiver implemented with a dual charge-pump circuit and external capacitors. Place each capacitor close to the pins shown in the manufacturer reference circuit to minimize loop area, switching noise, and distortion at the cable-side outputs.
What is the best drop-in replacement for MAX3232IPWRG4?
MAX3232IPWR is the clearest same-family drop-in candidate identified by the manufacturer cross-reference information, and Texas Instruments identifies the MAX3232E as an improved direct drop-in replacement for the MAX3232. Both alternatives retain the 16-pin TSSOP format and the same fundamental 3- to 5.5-V RS-232 interface. Confirm operating-temperature grade, lifecycle status, capacitor configuration, and exact electrical limits before approving a substitution.
Can MAX3232IPWR replace MAX3232IPWRG4?
Yes, MAX3232IPWR is identified as a parametric equivalent for MAX3232IPWRG4 and uses the same 16-pin TSSOP format. The primary engineering checks are the 3- to 5.5-V supply range, 250-kbps data rate, two-driver/two-receiver configuration, and external 0.1 µF capacitor arrangement. The G4 ordering code should be checked against production-temperature and marking requirements before substitution.
MAX3232IPWRG4 vs MAX3232EIPW - which is better?
MAX3232EIPW is generally the better choice for a new design because Texas Instruments describes MAX3232E as an improved direct drop-in replacement for MAX3232. It preserves the basic RS-232 interface and TSSOP-16 footprint while representing the enhanced family. MAX3232IPWRG4 remains appropriate where an established qualified source and the original G4 ordering code are required. Compare the manufacturer datasheets before transferring the design.
When should I choose MAX3232IPWRG4 instead of MAX3232EIPW?
Choose MAX3232IPWRG4 when maintaining an existing qualified design, matching an approved component list, or preserving the established MAX3232G4 source is more important than adopting the enhanced E-family. Choose MAX3232EIPW for new designs when the manufacturer-recommended improved replacement is acceptable. Both preserve the essential 3- to 5.5-V dual RS-232 interface and 16-pin TSSOP land pattern.
Is MAX3232IPWRG4 suitable for industrial equipment?
The MAX3232IPWRG4 is identified as an industrial-temperature-grade component with an operating range of -40 °C to +85 °C. That range suits industrial controllers, programmable logic controllers, instrumentation, and other equipment operating beyond typical commercial limits. Enclosure temperature, connector temperature rating, and power dissipation must still be evaluated for the complete assembly.
How should MAX3232IPWRG4 be protected against ESD?
The MAX3232IPWRG4 provides ±15-kV ESD protection from terminal to terminal on the RS-232 serial-port connections, according to the Texas Instruments product page. The protection does not replace correct connector and board design. Keep the cable-side traces away from sensitive circuitry, provide a low-impedance return path, and use an appropriate chassis or signal-ground strategy for the installation.
Where can I buy MAX3232IPWRG4 online?
Use the Request a Quote form on this page to request MAX3232IPWRG4 availability, current lead time, and order quantity. The form is the appropriate route for a quote and supply confirmation because channel pricing and inventory can change. No fixed customer price is stated on this page, and requests can be tied to the exact MAX3232IPWRG4 manufacturer ordering code.
What is the price of MAX3232IPWRG4?
Current MAX3232IPWRG4 pricing is not quoted as a fixed value on this page. Submit the part number and required quantity through the Request a Quote form so the commercial response can reflect current channel conditions and exact order details. This avoids presenting a starting or family-level price as a firm price for the specified MAX3232IPWRG4 ordering code.
What is the lead time and stock status for MAX3232IPWRG4?
Current stock and lead time should be requested through the Request a Quote form on this page. The verified distributor snippets describe varying availability conditions, but they do not establish a durable stock commitment for the exact part. Include your required delivery date and quantity in the request, particularly for production builds where schedule continuity matters.
What are the key specifications of MAX3232IPWRG4?
The key MAX3232IPWRG4 specifications are a 3- to 5.5-V supply range, two RS-232 drivers, two receivers, full-duplex operation, a maximum data rate of 250 kbps, and ±15-kV terminal-to-terminal ESD protection. The device is packaged in a 16-pin TSSOP and uses four external 0.1 µF charge-pump capacitors. Texas Instruments identifies it as compliant with TIA/EIA-232-F requirements.
What can replace MAX3232IPWRG4?
MAX3232IPWR is a same-package replacement identified as a parametric equivalent, while Texas Instruments identifies MAX3232E as an improved direct drop-in replacement for MAX3232. The MAX3232EIPW is the relevant TSSOP-16 option for an E-family upgrade. SP3232EBEY-L is a cross-brand functional candidate in the broader market, but its package and electrical details should be checked against the original footprint before substitution.

داده‌های مرجع مهندسی برای MAX3232IPWRG4 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose MAX3232IPWRG4 when maintaining an established industrial design, matching a qualified BOM, or preserving the exact G4 ordering code is important. Its 3- to 5.5-V operation, 250-kbps capability, dual full-duplex channels, and ±15-kV terminal ESD protection fit legacy RS-232 service ports on industrial and test equipment. Choose MAX3232IPWR when it is listed as an approved equivalent and the G4 production suffix is not required. Consider MAX3232EIPW for new designs because Texas Instruments identifies MAX3232E as an improved direct drop-in replacement, while checking its complete datasheet and production status. MAX3232CPWG4 is less attractive when the system must operate across the full -40 °C to +85 °C industrial range. SP3232EBEY-L can serve as a cross-brand option, but its SSOP lead style, pin mapping, capacitor network, and electrical limits require careful PCB-level review before approval.

مقایسه با جایگزین‌ها

پارامتر این محصول MAX3232IPWR MAX3232EIPW MAX3232EIPWG4 MAX3232CPW MAX3232CPWG4 SP3232EBEY-L
Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin SSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Lattice Semiconductor
Device Type Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver RS-232 transceiver
Supply Voltage 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V Supports 3.3 V operation
Transmitters and Receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers Dual RS-232 transceiver

تفاوت‌های کلیدی

  • Industrial-temperature MAX3232 configuration (در مقابلMAX3232CPWG4)
  • Manufacturer-supported improved family path (در مقابلMAX3232EIPW)
  • Direct same-family sourcing option (در مقابلMAX3232IPWR)

یادداشت‌های طراحی

Place the four 0.1 µF charge-pump capacitors directly beside the pins identified in the manufacturer reference circuit. Keep each capacitor-to-pin loop short and continuous, and avoid routing between the capacitor pads and their associated IC pins. This reduces charge-pump loop inductance and minimizes cable-side switching noise. Preserve the exposed connector and ground-pin layout shown in the datasheet rather than relying on general placement conventions.

Do not substitute a USB-to-serial bridge or a 5 V-only TTL transceiver for this device. The MAX3232IPWRG4 creates true bipolar RS-232 signal levels from a 3- to 5.5-V supply and uses a dedicated pinout. Also verify that a proposed alternative has the same charge-pump capacitor connections and connector-side pin mapping; an equivalent logic interface alone does not guarantee PCB compatibility.

Treat the RS-232 connector pins as an electrostatic-discharge and externally coupled noise entry point. Return connector shell or chassis ground to the enclosure reference appropriate to the installation, and avoid long unprotected traces between the IC and connector. Keep the charge-pump return current close to the device. In laboratory or industrial systems, evaluate whether isolation or additional surge protection is required for the cable length and installation environment.

Route the two transmit and two receive channels according to the manufacturer's reference layout, keeping sensitive receiver nodes away from the switching charge-pump nodes and connector pins. Use a solid ground plane, short receiver traces, and a controlled return path between logic ground and the interface reference. Validate operation with the intended cable because connector grounding, cable geometry, and neighboring switching circuits can materially affect RS-232 noise immunity.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The manufacturer product information confirms TIA/EIA-232-F compatibility and ±15-kV terminal-to-terminal ESD protection. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the cited product information.

جستجوهای مرتبط

MAX3232IPWRG4 datasheet MAX3232IPWRG4 datasheet pdf MAX3232IPWRG4 pinout MAX3232IPWRG4 equivalent MAX3232IPWRG4 replacement MAX3232IPWRG4 cross reference MAX3232IPWRG4 price MAX3232IPWRG4 stock Texas Instruments MAX3232IPWRG4 MAX3232IPWRG4 250 kbps MAX3232IPWRG4 16 pin TSSOP MAX3232IPWRG4 RS-232 transceiver MAX3232IPWRG4 industrial interface MAX3232IPWRG4 vs MAX3232EIPW MAX3232IPWRG4 application circuit

قطعات و اصطلاحات مرتبط

Texas Instruments MAX3232IPWRG4 MAX3232IPWR MAX3232EIPW MAX3232EIPWG4 MAX3232CPW MAX3232CPWG4 SP3232EBEY-L RS-232 TIA/EIA-232-F RS-232 transceiver line driver line receiver interface IC semiconductor dual charge-pump CMOS logic full duplex TIA/EIA-232-F interface TSSOP-16 TSSOP family surface mount SMD package ESD protection industrial control asynchronous serial communication
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ