MAX3232IPWRG4 - 3-5.5V RS-232 Transceiver | Texas Instruments
N.º da peça: MAX3232IPWRG4 ✓ AtivoMAX3232IPWRG4 Visão geral
An RS-232 transceiver is a semiconductor interface that converts logic-level signals into RS-232 line levels and converts received line-level signals back into CMOS logic. The MAX3232 belongs to the interface IC and RS-232 transceiver hierarchy, using an on-chip dual charge-pump circuit to generate the positive and negative voltages required by true RS-232 operation. This makes it suitable for industrial control, instrumentation, point-of-sale equipment, and legacy serial-port systems.
Key features include a 3 V to 5.5 V supply range, full-duplex operation with two drivers and two receivers, and data rates up to 250 kbps according to the manufacturer product information. The device also provides ±15-kV ESD protection on the serial-port connection terminals and uses external 0.1 µF charge-pump capacitors. Its low-voltage operation reduces the power burden compared with traditional ±5 V or ±12 V RS-232 implementations.
The internal charge-pump circuitry generates the bipolar voltages required to meet TIA/EIA-232-F electrical requirements. Because the charge pump switches internally, PCB layout must keep the charge-pump capacitors close to their designated pins and preserve adequate routing away from sensitive analog or communication circuits. The receiver includes hysteresis, which helps reject noise and prevents excessive output chatter as an input signal crosses the logic threshold.
Typical applications include legacy RS-232 ports on industrial controllers, test and measurement equipment, programmable logic controllers, security systems, and computer peripherals. The part is particularly useful where a modern 3.3 V or 5 V controller must communicate with an RS-232 device through a DB9 or equivalent connector.
The principal design trade-off is that the MAX3232IPWRG4 is a mature RS-232 interface rather than a modern USB-to-serial bridge. It requires external charge-pump capacitors, a suitable connector, and careful treatment of the exposed cable-side pins. Its industrial temperature grade supports equipment intended for a wider operating environment than commercial-temperature parts.
This product record combines manufacturer specifications, exact package information, lifecycle status, source links, and verified substitute information to support component selection. Engineers can use the comparison table and replacement notes to determine whether an alternative preserves the TSSOP-16 footprint, supply range, channel count, and RS-232 operating characteristics.
Alternativas drop-in para MAX3232IPWRG4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MAX3232IPWRG4 (mesmo formato e footprint) — diferindo em Package, Supply Voltage Range, ESD Protection, Maximum Data Rate, Product Type.
MAX3232IPWR
✅ Drop-InConsulte o preço
Ver ficha técnica →MAX3232EIPWG4
✅ Drop-InConsulte o preço
Ver ficha técnica →MAX3232EIPWG4
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →MAX3232CPWR
✅ Drop-InConsulte o preço
Ver ficha técnica →MAX3232CPWG4
✅ Drop-InConsulte o preço
Ver ficha técnica →SP3232EBEY-L/TR
✅ Drop-InConsulte o preço
Ver ficha técnica →MAX3232IPWRG4 Especificações
| Device Type | RS-232 line transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Duplex Type | Full duplex |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| ESD Protection | ±15 kV terminal to terminal |
| Interface Standard | TIA/EIA-232-F |
| Charge-Pump Architecture | Dual charge-pump circuit |
| External Charge-Pump Capacitors | 0.1 µF each |
| Receiver Hysteresis | 300 mV |
| Encapsulamento | 16-pin TSSOP |
| Terminal Count | 16 |
| Tipo de montagem | Surface mount |
| Faixa de temperatura de operação | -40 °C to +85 °C |
Guia de Configuração de Pinos do MAX3232IPWRG4 16-pin tssop
Configuração de pinos para MAX3232IPWRG4 (pacote 16-pin tssop). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para MAX3232IPWRG4.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MAX3232IPWRG4 é adequado para 6 aplicaçãos: Industrial RS-232 Controller Interface, Programmable Logic Controller Communication, Test and Measurement Equipment, Point-of-Sale and Peripheral Communication, Security and Access-Control Equipment, Embedded Service and Debug Port.
Industrial RS-232 Controller Interface
The MAX3232IPWRG4 fits industrial controllers that retain RS-232 communication with drives, meters, or service equipment. Its 3- to 5.5-V supply range allows connection to 3.3 V or 5 V controller logic without separate ±12 V interface rails. The dual charge-pump generates compliant positive and negative line voltages, while the two transmitters and two receivers support full-duplex links. Its -40 °C to +85 °C operating range supports industrial enclosures, although connector ratings and system-level thermal rise must also be checked.
Recomendado
Programmable Logic Controller Communication
The MAX3232IPWRG4 is suitable for PLC communication modules that must translate controller logic into RS-232 signals. A maximum data rate of 250 kbps supports common asynchronous serial configurations, while the full-duplex arrangement permits simultaneous command transmission and status reception. Its single 3- to 5.5-V supply simplifies interface design around modern embedded processors. The four required 0.1 µF capacitors should be placed directly beside their charge-pump pins to reduce switching-loop area and cable-side noise.
Recomendado
Test and Measurement Equipment
The MAX3232IPWRG4 can provide a legacy RS-232 port on bench instruments, programmable power supplies, and automated test systems. The 3.3 V compatibility reduces the need for level shifting between the transceiver and modern control logic, while the integrated charge pump supplies the bipolar voltages required by RS-232. The device supports up to 250 kbps, allowing it to match conventional serial-control links. For laboratory equipment, use a suitable isolated or chassis-connected protection strategy at the external connector and verify grounding to avoid introducing noise into measurements.
Recomendado
Point-of-Sale and Peripheral Communication
The MAX3232IPWRG4 supports RS-232 links used by point-of-sale terminals, scales, printers, and other commercial peripherals. The two-transmitter, two-receiver configuration allows independent inbound and outbound channels, and the device operates from the 5 V rails commonly present in peripheral equipment. Its 250-kbps maximum rate is more than adequate for many short-distance transaction and configuration links. Cable length, connector grounding, and peripheral-specific protocol requirements should be validated together because the transceiver rating does not remove all RS-232 cable limitations.
Recomendado
Security and Access-Control Equipment
The MAX3232IPWRG4 can be used in access-control panels and security-system modules that maintain an RS-232 service or configuration port. Its low-voltage operation integrates cleanly with 3.3 V or 5 V system logic, and ±15-kV terminal-to-terminal ESD protection adds useful robustness at an exposed cable-side interface. The industrial temperature range is advantageous in equipment stored in unconditioned spaces. The design should still include connector grounding, surge protection appropriate to the installation, and verified separation between the protected cable interface and sensitive security circuitry.
Recomendado
Embedded Service and Debug Port
The MAX3232IPWRG4 is appropriate for embedded systems that expose an RS-232 configuration, firmware-update, or diagnostic port. It bridges low-voltage CMOS UART signals to true RS-232 levels without requiring the host system to generate bipolar voltages. The dual full-dupplex channels support common transmit-and-receive diagnostic workflows, and 250 kbps is suitable for many bootloaders and console protocols. Firmware should implement appropriate electrical safeguards because the RS-232 transceiver provides logical signaling but does not by itself establish a secure authenticated update channel.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MAX3232IPWRG4 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MAX3232IPWR | MAX3232EIPW | MAX3232EIPWG4 | MAX3232CPW | MAX3232CPWG4 | SP3232EBEY-L |
|---|---|---|---|---|---|---|---|
| Package | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin SSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Lattice Semiconductor |
| Device Type | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | RS-232 transceiver |
| Supply Voltage | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | Supports 3.3 V operation |
| Transmitters and Receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | Dual RS-232 transceiver |
Principais diferenciais
- Industrial-temperature MAX3232 configuration (vs MAX3232CPWG4)
- Manufacturer-supported improved family path (vs MAX3232EIPW)
- Direct same-family sourcing option (vs MAX3232IPWR)
Notas de projeto
Place the four 0.1 µF charge-pump capacitors directly beside the pins identified in the manufacturer reference circuit. Keep each capacitor-to-pin loop short and continuous, and avoid routing between the capacitor pads and their associated IC pins. This reduces charge-pump loop inductance and minimizes cable-side switching noise. Preserve the exposed connector and ground-pin layout shown in the datasheet rather than relying on general placement conventions.
Do not substitute a USB-to-serial bridge or a 5 V-only TTL transceiver for this device. The MAX3232IPWRG4 creates true bipolar RS-232 signal levels from a 3- to 5.5-V supply and uses a dedicated pinout. Also verify that a proposed alternative has the same charge-pump capacitor connections and connector-side pin mapping; an equivalent logic interface alone does not guarantee PCB compatibility.
Treat the RS-232 connector pins as an electrostatic-discharge and externally coupled noise entry point. Return connector shell or chassis ground to the enclosure reference appropriate to the installation, and avoid long unprotected traces between the IC and connector. Keep the charge-pump return current close to the device. In laboratory or industrial systems, evaluate whether isolation or additional surge protection is required for the cable length and installation environment.
Route the two transmit and two receive channels according to the manufacturer's reference layout, keeping sensitive receiver nodes away from the switching charge-pump nodes and connector pins. Use a solid ground plane, short receiver traces, and a controlled return path between logic ground and the interface reference. Validate operation with the intended cable because connector grounding, cable geometry, and neighboring switching circuits can materially affect RS-232 noise immunity.
Informações de conformidade
The manufacturer product information confirms TIA/EIA-232-F compatibility and ±15-kV terminal-to-terminal ESD protection. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the cited product information.