NXP Semiconductors

MC33662SEF - LIN Bus Transceiver, 100 kbps, SOIC-8 | NXP

MPN: MC33662SEF ✓ فعال
13.5 V Vdss 8-SOIC, 0.154 in (3.90 mm) width Package
حداقل سفارش: 1 |

MC33662SEF نمای کلی

NXP Semiconductors MC33662SEF is a 1/1 LIN bus transceiver designed for automotive low-speed serial networks, with a stated signaling rate of 100 kbps and operation from a 13.5 V supply. The device is offered in an 8-pin SOIC package and combines a LIN transceiver with the interface circuitry required to connect a microcontroller to a LIN network. Its automotive-oriented application is reflected in the device description, while the SOIC-8 outline supports conventional surface-mount assembly.

A LIN, or Local Interconnect Network, transceiver is an interface IC that connects a host microcontroller to a low-speed vehicle-network bus. The LIN bus hierarchy sits below more complex in-vehicle networks and is commonly used for body electronics, lighting, door modules, climate controls, seat controls, and other distributed vehicle functions. The MC33662SEF translates digital logic levels between the host processor and the physical LIN network, allowing the processor to exchange commands and sensor information with remote nodes.

The MC33662SEF is identified as a single-channel, 1/1 LIN transceiver with a maximum stated bus speed of 100 kbps. This speed suits LIN nodes that exchange relatively small control payloads rather than high-bandwidth data. The 13.5 V operating-supply figure places the device in an automotive-style electrical environment and helps engineers evaluate its relationship to vehicle battery and regulated power rails. Its interface role should be reviewed together with the MCU supply level, transceiver enable strategy, bus termination, and protection requirements of the target vehicle platform.

The 8-SOIC package is the primary assembly constraint when planning a replacement or footprint comparison. Pin assignment, exposed-pad requirements, logic thresholds, sleep behavior, bus polarity, and transceiver operating mode must all be checked before substituting another part. The SOT96 package designation associated with the MC33662 family in comparison listings should not be confused with the SOIC-8 outline identified for MC33662SEF; package dimensions and land patterns are decisive in a drop-in review.

Typical LIN applications include automotive door modules, body-control units, seat and climate-control modules, lighting controllers, sensor interfaces, and compact actuator nodes. The MC33662SEF is most appropriate when a new design needs a 100 kbps LIN physical interface and can use the specified SOIC-8 footprint. In a mixed technology vehicle, it can connect a conventional microcontroller to LIN subnets without introducing a high-speed communications transceiver.

For PCB implementation, place the transceiver close to the connector or protected LIN trace, keep the bus path away from sensitive analog and high-speed digital routing, and provide the required local decoupling. Review the manufacturer datasheet for the exact input and output pin functions, logical enable polarity, sleep-mode behavior, and external component requirements. Those details determine whether a candidate part is a true pin-to-pin replacement rather than only a similar LIN transceiver.

This product page combines the identifiable MC33662SEF device data, package and speed information, same-family replacement evidence, application guidance, and a focused engineering comparison framework. It highlights what can be confirmed for the exact ordered part and directs designers to the manufacturer datasheet for authoritative connection details, electrical limits, and implementation requirements.

جایگزین‌های drop-in برای MC33662SEF — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MC33662SEF (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Product Type.

NXP Semiconductors
Package: 8-pin SOIC
Product Type: LIN physical-layer transceiver
مقایسه با MC33662SEF →

MC33662BSEF

✅ جایگزین مستقیم
📦 8-SOIC
Identified as completely replaceable with consistent terminals, package, and principal performance characteristics; orderable-suffix qualification details require confirmation.

📋 جایگزین مرجع (خارج از کاتالوگ)

MC33662SEF مشخصات

Product Type 1/1 LIN bus transceiver
LIN Channel Count 1 channel
Bus Interface LIN bus
Maximum Stated Data Rate 100 kbps
Operating Supply 13.5 V
Automotive Application Yes
بسته‌بندی 8-SOIC, 0.154 in (3.90 mm) width
تعداد پایه 8 pins
نوع نصب Surface mount
Manufacturer NXP Semiconductors
Original Manufacturer Freescale Semiconductor
Device Classification Transceiver, half
Sleep Mode Supported

راهنمای پیکربندی پین MC33662SEF 8-soic, 0.154 in (3.90 mm) width

پیکربندی پین برای MC33662SEF (پکیج 8-soic, 0.154 in (3.90 mm) width). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 8-soic, 0.154 in (3.90 mm) width برای MC33662SEF

داده پین‌آوت تفصیلی موجود نیست برای MC33662SEF.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MC33662SEF مناسب است برای 6 کاربردs: Automotive Door Control Module, Climate-Control Body Module, Seat and Lighting Controller, Automotive Sensor Interface, Compact Vehicle Actuator Node, Body Electronics Gateway.

🚗

Automotive Door Control Module

The MC33662SEF provides the physical interface for a LIN-connected door control node operating at up to 100 kbps. A host MCU or LIN-capable controller can use the single transceiver channel for communication with switches, latch actuators, position sensors, and related body electronics. Its stated 13.5 V operating supply fits automotive power-system environments, while the 8-SOIC package supports conventional surface-mount assembly. The design should verify logic-level compatibility, wake-up behavior, and external bus protection against the manufacturer datasheet.

🏭

Climate-Control Body Module

A climate-control module can use the MC33662SEF as a 100 kbps LIN physical-layer endpoint for remote temperature sensors, fan commands, and actuator control. The single-channel 1/1 arrangement is appropriate when the module needs one LIN subnet interface and a separate controller handles frame timing and diagnostic behavior. The 8-SOIC outline helps preserve a conventional footprint, but the MCU interface voltage and sleep-mode logic must be confirmed before schematic release.

💡

Seat and Lighting Controller

The MC33662SEF is suitable for distributed seat, lighting, and switch modules that exchange low-bandwidth commands over LIN. Its stated 100 kbps rate matches the network class commonly used for body-control nodes, allowing a host processor to monitor switches and coordinate motors or lamps without relying on a higher-bandwidth bus transceiver. The 13.5 V operating supply is an important matching point, while wiring protection and automotive qualification requirements must be addressed at the system level.

🧩

Automotive Sensor Interface

The MC33662SEF can connect a vehicle sensor or compact actuator node to a LIN bus running at up to 100 kbps. This arrangement is useful where multiple small sensors share a bus and the application needs robust wired communication over a lower-cost network. The MCU must implement the LIN protocol and diagnostic behavior because the MC33662SEF provides the physical transceiver layer. Its 8-SOIC package and single-channel architecture simplify compact module layouts.

⚡

Compact Vehicle Actuator Node

A compact actuator node can use the MC33662SEF to receive commands from a central LIN controller and return status information at up to 100 kbps. The device's single LIN channel is well matched to a dedicated endpoint with one network connection. The design must account for the actuator's supply transients, ground-bounce conditions, connector protection, and transceiver sleep current. The manufacturer datasheet should define the logic thresholds and mode-control behavior used by the host controller.

🌐

Body Electronics Gateway

The MC33662SEF can serve as a LIN endpoint within a body-electronics gateway that coordinates distributed vehicle accessories. At 100 kbps, it is intended for supervisory commands, switch states, and sensor readings rather than bulk data transfer. The 13.5 V stated supply and 8-SOIC assembly align with the operating environment and manufacturing style of automotive control boards. For production use, validate bus fault recovery, wake-up behavior, and transient protection with the complete wiring harness.

خلاصه محصولات پیشنهادی

MC33662BSEF Same-family drop-in transceiver candidate استفاده‌شده در: Automotive Door Control Module, Climate-Control Body Module, Seat and Lighting Controller, Automotive Sensor Interface, Compact Vehicle Actuator Node, Body Electronics Gateway
What is the NXP MC33662SEF?
The NXP MC33662SEF is a single-channel 1/1 LIN bus transceiver for automotive low-speed serial networks. According to the NXP product listings, it supports LIN signaling up to 100 kbps, operates from a stated 13.5 V supply, and is packaged in an 8-SOIC outline with a 3.90 mm body width. It is intended to provide the physical-layer interface between a vehicle-network controller or microcontroller and a LIN bus.
What is the maximum LIN data rate of the MC33662SEF?
The MC33662SEF supports LIN communication at up to 100 kbps. This is the stated maximum bus rate for the exact device and is appropriate for low-bandwidth vehicle networks used by body electronics and sensor nodes. The host controller must generate and interpret LIN frames correctly, and the complete network must observe the protocol timing specified for LIN communication rather than treating the transceiver as a general-purpose serial interface.
What package does the MC33662SEF use?
The MC33662SEF is supplied in an 8-SOIC package with a stated width of 0.154 inches, or 3.90 mm. The eight pins and surface-mount assembly style make the physical footprint a primary requirement when comparing replacements. Before substituting a part, verify that its land pattern, pin numbering, exposed-pad arrangement, electrical limits, and transceiver control logic match the MC33662SEF rather than relying on the generic LIN-transceiver description alone.
Where can I download the MC33662SEF datasheet PDF?
The MC33662SEF datasheet PDF can be reached through the datasheet link listed on this product page. The linked document identifies the original manufacturer as Freescale Semiconductor, a predecessor of NXP Semiconductors. Use the pin-description table, electrical characteristics, recommended application circuit, and package drawing in the manufacturer datasheet when assigning PCB signals, selecting external components, and validating any replacement.
Where can I find the MC33662SEF pinout?
The MC33662SEF pinout is defined in the manufacturer datasheet for the 8-SOIC package. Use the package drawing and pin-description table together to identify supply, ground, logic-side interface, LIN-side connection, enable, and sleep-related functions. Pin names and numbering should be transcribed directly from the datasheet because the package is also described in some comparison records using a legacy SOT96 designation, which may not visually match the SOIC outline.
Can the MC33662SEF be used in an automotive LIN bus?
Yes, the MC33662SEF is identified specifically as an automotive LIN transceiver. Its 100 kbps communication rate and 13.5 V stated operating supply align it with low-speed vehicle networking. The complete design must still meet the electrical, EMC, transient, and wiring requirements of the target vehicle program, while the MCU interface voltage and transceiver sleep behavior must be checked against the manufacturer datasheet.
What applications are suitable for the MC33662SEF?
The MC33662SEF suits automotive LIN nodes such as door modules, climate-control units, seat controllers, lighting modules, compact actuators, and distributed sensor interfaces. It is appropriate when the host controller needs LIN physical-layer connectivity at up to 100 kbps. A LIN-capable MCU or dedicated network controller is also required because the transceiver performs signal interfacing rather than LIN protocol generation.
What can replace the MC33662SEF?
The MC33662SEF can be considered for replacement by the MC33662BSEF because a comparison record identifies consistent terminals, package compatibility, and matching principal performance characteristics. A qualified replacement must still undergo a complete review of pin functions, electrical limits, supply range, sleep-mode behavior, protection, and qualification requirements. Only a candidate whose package and control interface match the exact 8-SOIC MC33662SEF should be approved as a drop-in substitute.
Is the MC33662BSEF the same as the MC33662SEF?
The MC33662BSEF is reported as a complete replacement for the MC33662SEF, with consistent performance characteristics, terminals, and package. The two orderable suffixes may still differ in qualification, temperature grade, marking, or procurement configuration, so engineers should compare the manufacturer ordering information and datasheets. The cross-reference supports replacement evaluation, but production approval remains dependent on application-specific validation.
When should I choose the MC33662SEF over another LIN transceiver?
Choose the MC33662SEF when the design requires the confirmed 100 kbps LIN interface, a stated 13.5 V operating supply, and the specified 8-SOIC footprint. It is particularly suitable for automotive body and sensor modules that already use a compatible LIN-capable controller. Select another candidate instead if it offers a needed qualification, temperature grade, protection feature, package, or sleep-mode behavior that the MC33662SEF does not provide.
Is the MC33662SEF suitable for a low-speed body-control module?
The MC33662SEF is suitable for a low-speed body-control module when the module communicates over LIN at no more than 100 kbps and uses a compatible host controller. Its single-channel 1/1 transceiver arrangement supports one LIN physical interface, while the 8-SOIC package simplifies conventional PCB assembly. Confirm logic voltage compatibility, wake-up requirements, and automotive protection requirements in the manufacturer datasheet before release.
Where can I buy the MC33662SEF online?
Use the Request a Quote form on this page to request the current MC33662SEF price, stock position, minimum order quantity, and lead time. The form provides the appropriate channel for a quote-based electronic-component purchase and avoids presenting a stale transactional listing. When requesting the quote, specify the exact MC33662SEF orderable suffix and the required shipping quantity and packaging.
What is the price of the MC33662SEF?
Current MC33662SEF pricing depends on quantity, availability, and the requested packaging configuration, so use the Request a Quote form on this page for a current offer. The product page keeps purchasing information tied to the exact MC33662SEF rather than presenting an outdated list price. Include your required quantity, ship-to country, and target delivery date in the request for the most useful response.
What is the lead time for the MC33662SEF?
Request the current MC33662SEF lead time through the Request a Quote form on this page. Lead time can vary with order quantity, component availability, and the manufacturing and logistics plan associated with the selected package configuration. The form allows procurement to confirm the current schedule for the exact MPN instead of relying on a general category estimate.
Is the MC33662SEF in stock?
Use the Request a Quote form on this page to check current MC33662SEF availability, allocation status, and shipment timing. Inventory can move after a search result is generated, so the quoted response should be treated as the actionable supply confirmation. Provide the required quantity and packaging details to allow procurement to return a meaningful availability commitment.
What are the key specifications of MC33662SEF that engineers should know?
The MC33662SEF is a single-channel 1/1 LIN transceiver with a stated 100 kbps bus rate, 13.5 V operating supply, and 8-SOIC package measuring 3.90 mm in width. These four characteristics define its principal network speed, supply environment, channel count, and PCB footprint. Engineers should also verify logic thresholds, current limits, sleep behavior, protection, and temperature limits directly in the manufacturer datasheet before schematic approval.
What is the best NXP equivalent for the MC33662SEF?
The best-supported NXP alternative identified for the MC33662SEF is the MC33662BSEF, which a dedicated comparison record describes as completely replaceable with consistent terminals, package, and principal performance characteristics. Engineers should still verify the exact ordering information and application requirements. The MC33662BSEF should not be released as a drop-in substitute solely from a family name or without checking the pin and electrical tables.
MC33662SEF versus MC33662BSEF: which is better for an automotive LIN node?
The MC33662BSEF is the stronger drop-in candidate because the comparison record reports consistent package, terminals, and principal performance characteristics with the MC33662SEF. The MC33662SEF remains the exact named part for an approved existing design, while the MC33662BSEF is useful when a second orderable suffix is needed. Final selection should account for qualification, temperature grade, lifecycle status, and change-control requirements.

داده‌های مرجع مهندسی برای MC33662SEF — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the MC33662SEF when the product requires a single LIN physical-layer interface operating at up to 100 kbps, a stated 13.5 V supply, and the confirmed 8-SOIC footprint. It is well suited to automotive door, climate-control, lighting, sensor, and actuator modules in which a host controller implements the LIN protocol. The MC33662BSEF is the preferred alternative when procurement needs another orderable suffix because the available comparison record reports consistent terminals, package, and principal performance characteristics. Approve that substitution only after checking the ordering information, temperature grade, qualification, sleep behavior, and electrical limits for both devices. Do not select a generic LIN transceiver when the PCB already has the MC33662SEF footprint; matching the bus speed alone does not guarantee pin compatibility, logic-level compatibility, or equivalent wake-up behavior.

مقایسه با جایگزین‌ها

پارامتر این محصول MC33662BSEF
Package 8-SOIC, 0.154 in (3.90 mm) width Package reported consistent with MC33662SEF
Brand NXP Semiconductors NXP Semiconductors
Transceiver Configuration 1/1 LIN transceiver Reported consistent principal characteristics
Automotive Application Yes Automotive
Pin and Terminal Compatibility 8-SOIC reference design Terminals and package reported consistent

تفاوت‌های کلیدی

  • Exact orderable device with a defined automotive LIN application (در مقابلMC33662BSEF)
  • Single-channel LIN interface for distributed vehicle nodes (در مقابلMC33662BSEF)
  • Established SOIC-8 assembly footprint (در مقابلMC33662BSEF)

یادداشت‌های طراحی

Place the MC33662SEF near the LIN connector or protected bus entry point and keep the LIN trace short and isolated from sensitive analog or high-speed digital routes. Provide local supply decoupling at the device pins using the capacitor values and layout shown in the manufacturer datasheet. The 8-SOIC footprint is not interchangeable with the legacy SOT96 designation mentioned in some comparison records, so verify land-pattern dimensions against the package drawing before PCB release.

Do not approve a replacement based only on the phrase LIN transceiver. Confirm pin numbering, logic-side signals, enable and sleep polarity, supply limits, bus output behavior, and package dimensions. The MC33662BSEF is reported as completely replaceable, but qualification and orderable-suffix differences still require review. A substitution that matches 100 kbps LIN communication but differs in wake-up or mode-control logic may not be functionally drop-in.

The LIN bus cable and connector can introduce transient energy and radiated disturbance into a compact automotive control board. Use the interface, protection, and grounding arrangement specified in the manufacturer application guidance, and keep return-current paths short. Validate radiated-emission, conducted-immunity, transient, ground-offset, and bus-fault behavior on the completed module because a compliant transceiver alone does not establish compliance of the finished product.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The device is identified for automotive applications, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified in the available product records. Verify the current environmental and quality documentation before production release.

تاریخ تأیید داده‌ها: 2026-11-16 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MC33662SEF datasheet MC33662SEF datasheet pdf MC33662SEF pinout MC33662SEF schematic MC33662SEF equivalent MC33662SEF replacement MC33662SEF cross reference MC33662SEF vs MC33662BSEF MC33662SEF footprint MC33662SEF price MC33662SEF stock NXP MC33662SEF MC33662SEF LIN automotive application MC33662SEF 100 kbps transceiver

قطعات و اصطلاحات مرتبط

NXP Semiconductors Freescale Semiconductor MC33662SEF MC33662BSEF LIN bus Local Interconnect Network LIN transceiver interface IC automotive electronics body electronics 100 kbps serial communication single-channel transceiver 8-SOIC SOIC package family surface-mount package 13.5 V operating supply sleep mode LIN physical layer microcontroller interface vehicle sensor node actuator node RoHS REACH AEC-Q100
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ