Microchip Technology

MCP3422A6-E/SN - 18-Bit Dual-Channel ADC | Microchip

MPN: MCP3422A6-E/SN ✓ فعال
2.048 V Vdss 8-pin SOIC, 3.90 mm width Package
حداقل سفارش: 1 |

MCP3422A6-E/SN نمای کلی

Microchip Technology MCP3422A6-E/SN is an 18-bit, dual-channel delta-sigma analog-to-digital converter with a 3.75 samples-per-second conversion rate, differential inputs, an I2C interface, and an 8-pin SOIC package. It includes an onboard precision 2.048 V reference and supports a differential input range of ±2.048 V. The -E/SN ordering identifies the extended-temperature device supplied in a tube.

An analog-to-digital converter is an integrated circuit that converts continuous analog voltage signals into digital codes for processing, measurement, or control. Delta-sigma ADCs belong to the ADC family within data-converter and signal-chain ICs. They use oversampling, digital filtering, and noise shaping to obtain high resolution without requiring a high-frequency flash-converter clock. The MCP3422 combines this measurement architecture with two differential channels, an integrated voltage reference, programmable gain, and a serial host interface.

Principal features include 18-bit resolution, two differential input channels, and a precision 2.048 V onboard reference. The converter supports 3.3 V and 5 V operation, uses an I2C interface, and provides auto-calibration and power-on reset functions. Differential measurement helps reject common-mode voltage and supply noise when the signal source is arranged symmetrically. Programmable gain allows the ADC to scale smaller sensor outputs without sacrificing use of its available input range.

The sigma-delta architecture favors low-noise, high-resolution measurements at low sample rates rather than high-speed waveform capture. The 3.75 SPS rate is appropriate for temperature, pressure, strain, load-cell, potentiometer, and slow industrial process signals. Internal offset and gain calibration improve accuracy over operating conditions, while the onboard reference reduces the number of external precision components required for moderate-accuracy systems.

Typical uses include battery-powered instrumentation, factory process monitoring, pressure and temperature sensors, low-rate data loggers, portable measurement equipment, and industrial control boards. Differential sensor inputs are especially useful when the measured quantity appears as a small voltage across a bridge or sensor pair. The I2C interface also allows the converter to share a two-wire bus with a host microcontroller or other low-speed peripherals.

When designing a board around the MCP3422A6-E/SN, route the analog inputs and reference circuitry away from switching nodes and digital return currents. Place input filtering close to the ADC pins, use a quiet analog supply path, and verify that signal common-mode voltage remains inside the device operating limits. Anti-alias filtering, input settling time, and the configured conversion period must be evaluated together rather than treating the nominal sample rate as an unrestricted bandwidth specification.

This product page combines the manufacturer device description with distributor specifications, application guidance, package information, and a drop-in-focused comparison with other MCP3422 gain and conversion-rate options. It also identifies where application-specific data must be checked in the manufacturer datasheet before schematic release or production qualification.

جایگزین‌های drop-in برای MCP3422A6-E/SN — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MCP3422A6-E/SN (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Conversion Rate, Package, Differential Input Range, Operating Temperature Range, Digital Interface.

Microchip Technology
Package: 8-pin SOIC
Operating Temperature Range: -40°C to +125°C
Microchip Technology
Package: 8-pin SOIC
Digital Interface: 2-wire I²C-compatible serial interface
Microchip Technology
Package: 8-pin SOIC
Microchip Technology
Conversion Rate: 4 sps
Package: 8-pin SOIC
Differential Input Range: +/-2.048 V

MCP3422A0-E/SN

✅ جایگزین مستقیم
Microchip Technology
📦 8-SOIC
Delta-sigma (ΔΣ) · Up to 18 bits · 2 channels · Differential · 2.048 V · ±2.048 V · 2.7 V to 5.5 V · Two-wire I2C-compatible serial interface

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MCP3422A1-E/SN

✅ جایگزین مستقیم
Microchip Technology
📦 8-SOIC
Delta-sigma ADC · Up to 18 bits · 2 channels · Differential · 2.048 V · -2.048 V to +2.048 V · 3.75 samples/s · 3.3 V or 5 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MCP3422A2-E/MC

✅ جایگزین مستقیم
Microchip Technology
📦 8-SOIC
Delta-sigma ADC · 18 bit · 2 differential channels · Differential inputs · 2.7 V to 5.5 V · 2.048 V · Plus or minus 2.048 V · 240 samples per second

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MCP3422A3-E/SN

✅ جایگزین مستقیم
Microchip Technology
📦 8-SOIC
18 bit · 2 channels · Differential input · 1 sigma-delta converter · 3.75 samples/s · 2.048 V · ±2.048 V · 2.7 V to 5 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MCP3422A5T-E/SN

✅ جایگزین مستقیم
📦 8-SOIC
Resolution and channel count are unchanged at 18 bits and 2 channels (0% difference); conversion-rate and gain configuration differ.

📋 جایگزین مرجع (خارج از کاتالوگ)

MCP3422A6-E/SN حداکثر مقادیر مجاز و مشخصات الکتریکی

ADC Resolution 18 bit
Number of Input Channels 2 channels
Conversion Architecture 1 sigma-delta ADC
Conversion Rate 3.75 samples/s
Input Type Differential
Onboard Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Full-Scale Differential Range 4.096 V/PGA
Digital Interface I2C
Programmable Gain Amplifier Available
ولتاژ تغذیه 3.3 V or 5 V
محدوده دمای کاری -40 °C to +125 °C
Automotive Qualification AEC-Q100
Auto Calibration Supported
Power-On Reset Supported
بسته‌بندی 8-pin SOIC, 3.90 mm width
نوع نصب Surface mount
Shipping Package Tube

راهنمای پیکربندی پین MCP3422A6-E/SN tube

پیکربندی پین برای MCP3422A6-E/SN (پکیج tube). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج tube برای MCP3422A6-E/SN

داده پین‌آوت تفصیلی موجود نیست برای MCP3422A6-E/SN.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MCP3422A6-E/SN مناسب است برای 6 کاربردs: Pressure Sensor Acquisition, Industrial Temperature Monitoring, Battery-Powered Data Loggers, Strain and Load Cell Measurement, Process Control Instrumentation, Precision Potentiometer Monitoring.

🏭

Pressure Sensor Acquisition

MCP3422A6-E/SN fits bridge-based pressure sensing because its two differential inputs can accept a sensor signal without converting it to a single-ended signal first. The 18-bit resolution preserves small changes in millivolt-level bridge outputs, while the 2.048 V onboard reference and programmable gain provide the scaling required by many pressure transducers. At a 3.75 samples/s conversion rate, the converter is suited to stable pressure readings rather than pressure pulsations. Place input filtering close to the ADC pins and route the differential pair away from switching converters to avoid reducing the benefit of the common-mode rejection.

🌡️

Industrial Temperature Monitoring

The MCP3422A6-E/SN is appropriate for multi-channel industrial temperature monitoring when measurements change slowly and high resolution is more valuable than rapid sampling. Two differential channels can monitor paired sensing elements or two isolated sensor inputs, and the 18-bit conversion resolution supports narrow measurement increments. Its 3.75 samples/s rate provides enough update speed for thermal processes while reducing conversion-related power demand. The operating range of -40 °C to +125 °C also supports equipment deployed across wide environmental zones, provided the external sensor, wiring, and front-end protection are appropriately rated.

🧩

Battery-Powered Data Loggers

MCP3422A6-E/SN is well matched to portable data loggers that periodically record slowly changing environmental or equipment measurements. Its low conversion rate of 3.75 samples/s avoids unnecessary conversion activity, while the integrated 2.048 V reference reduces the number of external precision components that would consume board space. Differential inputs are valuable for reducing sensitivity to battery-supply variation and ground offsets. A low-power host can control acquisition through I2C and keep the converter unpowered between measurements, subject to the power-on reset and startup behavior described in the manufacturer datasheet.

⚡

Strain and Load Cell Measurement

MCP3422A6-E/SN can digitize differential strain-gauge and load-cell outputs when the mechanical signal varies slowly. The two differential inputs support a complementary bridge arrangement, while 18-bit resolution and programmable gain help preserve small millivolt-level changes around the electrical midpoint. The 2.048 V internal reference defines the conversion scale and is suitable for ratiometric sensors operated from the same excitation source. Accurate results depend on keeping excitation and return currents away from the input traces, providing stable bridge excitation, and applying filtering that preserves the mechanical bandwidth of interest.

🔧

Process Control Instrumentation

MCP3422A6-E/SN supports industrial process-control modules that monitor temperature, pressure, level, or other slowly changing analog variables. Two differential channels reduce the number of separate converters when the signals are referenced to a common return, and I2C simplifies connection to a supervisory controller. The 3.75 samples/s rate is appropriate for closed-loop monitoring rather than fast control loops. For reliable operation, isolate analog and digital power paths, maintain stable sensor excitation, and apply input protection that does not compromise the differential input impedance or converter accuracy.

📱

Precision Potentiometer Monitoring

MCP3422A6-E/SN can monitor mechanical potentiometers and other high-impedance dividers when the application values stable, high-resolution readings over rapid sampling. Differential inputs permit the divider to be referenced across two ADC inputs, reducing sensitivity to common-mode ground movement. The 18-bit resolution provides fine position discrimination, while programmable gain can improve use of the ADC range for restricted-angle sensors. The 3.75 samples/s rate suits position readouts that do not change materially between samples. Use an appropriate input buffer if the divider impedance could load the source or introduce excessive settling time.

What are the key specifications of MCP3422A6-E/SN that engineers should know?
The MCP3422A6-E/SN combines 18-bit resolution, two differential input channels, a 3.75 samples/s conversion rate, a 2.048 V onboard reference, and an I2C interface in an 8-pin SOIC package. According to the Microchip MCP3422 datasheet and manufacturer product page, the device also supports programmable gain, auto-calibration, and power-on reset. Its differential input range is ±2.048 V, making it appropriate for low-rate, high-resolution measurements rather than high-speed waveform acquisition.
Where can I download the MCP3422A6-E/SN datasheet PDF?
The official MCP3422A6-E/SN documentation is available through the Microchip Technology MCP3422 product page at https://www.microchip.com/en-us/product/MCP3422. That manufacturer page provides the device description and access to supporting documentation. Use the MCP3422 datasheet to confirm the complete pin-description table, recommended application circuit, electrical limits, calibration procedure, and ordering information before releasing the PCB or production design.
Where can I find the MCP3422A6-E/SN pinout and 8-SOIC footprint?
Use the MCP3422 manufacturer datasheet for the authoritative MCP3422A6-E/SN pin-description table and land pattern. The verified product listing identifies the package as 8-pin SOIC with a 3.90 mm body width. Because the individual terminal names and numbering are not reproduced in the product listing, consult the pin-description table and package drawing in the datasheet before assigning PCB nets or checking polarity.
What can replace MCP3422A6-E/SN with the same 8-pin SOIC footprint?
The closest documented replacements are other MCP3422 gain or conversion-rate options in the same 8-SOIC family, including MCP3422A0-E/SN, MCP3422A1-E/SN, MCP3422A2-E/SN, MCP3422A3-E/SN, and MCP3422A5T-E/SN. They preserve the 18-bit, two-channel delta-sigma ADC architecture, but their conversion rates or gain configurations differ. Confirm the exact suffix, conversion timing, calibration behavior, and I2C address in the manufacturer documentation before substitution.
Is MCP3422A6-E/SN suitable for pressure and temperature sensing?
Yes, MCP3422A6-E/SN is suitable for slow pressure, temperature, and other ratiometric sensor measurements. Its 18-bit resolution, differential inputs, 2.048 V reference, programmable gain, and 3.75 samples/s conversion rate match bridge transducers and low-level sensor outputs. Differential wiring reduces common-mode error when the sensor is driven symmetrically, while the 8-pin SOIC package simplifies compact instrumentation designs.
MCP3422A6-E/SN vs MCP3422A0-E/SN: which is better for a low-rate sensor?
MCP3422A6-E/SN is preferable when the design requires the 3.75 samples/s conversion-rate option listed for the target device. MCP3422A0-E/SN remains the better choice when its conversion-rate setting better matches the required refresh interval or bandwidth. Both devices retain 18-bit resolution, two differential channels, and the same 8-SOIC mechanical package, but the operating configuration should be verified before replacement.
MCP3422A6-E/SN vs MCP3422A1-E/SN: what is the difference?
MCP3422A6-E/SN is configured for a 3.75 samples/s conversion rate, while MCP3422A1-E/SN represents a different gain and conversion-rate option within the MCP3422 family. Both retain the same 18-bit sigma-delta conversion principle, two differential inputs, onboard 2.048 V reference, I2C interface, and 8-pin SOIC footprint. Selection should be based on the required gain, conversion timing, noise performance, and exact register behavior specified for each suffix.
When should I choose MCP3422A6-E/SN over another MCP3422 variant?
Choose MCP3422A6-E/SN when the specified 3.75 samples/s operating mode matches the required sensor refresh rate and the system needs an 18-bit, two-channel delta-sigma ADC with differential inputs. Select another suffix when its conversion-rate or gain option better matches the transducer output, digital filter requirements, or acquisition timing. Because conversion timing influences usable signal bandwidth, verify the complete timing specification rather than comparing resolution alone.
Is MCP3422A6-E/SN the same as MCP3422A5T-E/SN?
No. MCP3422A6-E/SN and MCP3422A5T-E/SN are distinct MCP3422 configurations with different gain or conversion-rate options, although both use an 8-pin SOIC package and share the 18-bit, two-channel delta-sigma ADC platform. The package match permits a footprint-level replacement path, but firmware, conversion timing, gain configuration, and electrical behavior may require adjustment. Verify the exact MCP3422 suffix before treating them as interchangeable.
What is the best Microchip equivalent for MCP3422A6-E/SN?
The best Microchip equivalent depends on which functional option is missing or unsuitable. MCP3422A0-E/SN, MCP3422A1-E/SN, MCP3422A2-E/SN, MCP3422A3-E/SN, and MCP3422A5T-E/SN are same-family 8-SOIC candidates documented alongside the target. They are pin-compatible in package terms but differ in gain or conversion-rate configuration, so the correct equivalent is the suffix whose operating characteristics satisfy the sensor and acquisition requirements.
How much PCB layout attention does MCP3422A6-E/SN require?
MCP3422A6-E/SN deserves a quiet analog layout because its 18-bit resolution and differential inputs can be undermined by routing noise directly into the measurement path. Keep the analog inputs short, place input filtering near the converter, separate analog and digital return currents, and avoid routing input traces beneath switching circuitry. Follow the recommended application layout in the MCP3422 datasheet for decoupling, exposed analog grounding practices, and I2C pull-up placement.
Can MCP3422A6-E/SN measure rapidly changing waveforms?
MCP3422A6-E/SN is optimized for low-noise, low-speed measurement rather than waveform capture at its listed 3.75 samples/s conversion rate. It is suitable for temperature, pressure, strain, and slow process signals whose relevant bandwidth is well below the available conversion rate. For fast transients or high-frequency AC measurements, choose a converter with a substantially higher sample rate and appropriate analog input bandwidth.
Where can I buy MCP3422A6-E/SN and check current availability?
Use the Request a Quote form on this page to request MCP3422A6-E/SN pricing, current availability, minimum order quantity, and lead time. Quote requests keep commercial terms aligned with the requested 8-pin SOIC tube ordering code. The manufacturer product page and distributor listing can be used to confirm that the exact MCP3422A6-E/SN configuration remains part of the MCP3422 family.
What is the lead time for MCP3422A6-E/SN?
The current lead time for MCP3422A6-E/SN should be requested through the Request a Quote form on this page. Lead time can vary with the exact ordering suffix, package format, quantity, and current factory allocation, so a quantity-specific quotation is more useful than a generic availability statement. Specify that the required device is MCP3422A6-E/SN, the 8-pin SOIC configuration, and the desired tube quantity.
Is MCP3422A6-E/SN in stock and what does the automotive qualification mean?
Current MCP3422A6-E/SN stock should be confirmed through the Request a Quote form on this page. The part is identified by a distributor datasheet listing as an automotive AEC-Q100 device operating from -40 °C to +125 °C. Automotive qualification indicates suitability for specified automotive-grade requirements, but the production design must still verify all electrical, environmental, and quality requirements for the target vehicle platform.

داده‌های مرجع مهندسی برای MCP3422A6-E/SN — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose MCP3422A6-E/SN when the design requires an 18-bit, dual-channel delta-sigma ADC at the documented 3.75 samples/s conversion rate, particularly for slow pressure, temperature, strain, or process-sensor measurements. Its differential inputs, programmable gain, 2.048 V onboard reference, I2C interface, AEC-Q100 qualification, and -40 °C to +125 °C operating range make it suitable for noise-sensitive industrial and automotive environments. MCP3422A0-E/SN is the logical same-family option when a different conversion-rate or gain configuration better matches the sensor and acquisition schedule. MCP3422A1-E/SN, MCP3422A2-E/MC, MCP3422A3-E/SN, and MCP3422A5T-E/SN are additional 8-SOIC family candidates, but each requires suffix-specific verification of timing, gain, filtering, and firmware configuration. Because all five alternatives preserve the package while changing operating options, use the exact manufacturer ordering and datasheet information—not package similarity alone—to approve a replacement.

مقایسه با جایگزین‌ها

پارامتر این محصول MCP3422A0-E/SN MCP3422A1-E/SN MCP3422A2-E/MC MCP3422A3-E/SN MCP3422A5T-E/SN
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
ADC Resolution 18 bit 18 bit 18 bit 18 bit 18 bit 18 bit
Input Channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels
Conversion Architecture Sigma-delta Sigma-delta Sigma-delta Sigma-delta Sigma-delta Sigma-delta

تفاوت‌های کلیدی

  • Three distinct gain and conversion-rate selections use the same 8-SOIC footprint (در مقابلMCP3422A0-E/SN)
  • Target conversion mode is identified at 3.75 samples per second (در مقابلMCP3422A1-E/SN)
  • Automotive qualification and extended temperature operation (در مقابلMCP3422A5T-E/SN)
  • Integrated precision reference simplifies moderate-accuracy measurements (در مقابلMCP3422A2-E/MC)

یادداشت‌های طراحی

Route each differential input as a tight, continuous pair from the sensor or filter to the corresponding MCP3422A6-E/SN pins. Keep the pair away from switching-node traces, high-current return paths, and digital clock lines. Place input-series resistors and anti-alias capacitors close to the converter rather than at the sensor connector, where they would not suppress pickup entering the sensitive signal path.

Follow the manufacturer-recommended decoupling arrangement and provide a low-impedance return from the analog supply pins to the device ground. The ADC operates from 3.3 V or 5 V, but supply tolerance alone does not determine conversion accuracy: source impedance, clock and digital activity, reference stability, and input common-mode limits also affect the result. Verify these conditions at the actual board level before calibration.

Do not select the replacement solely because it has the same 8-SOIC footprint. MCP3422 suffixes can differ in gain and conversion-rate options, which changes acquisition timing, digital filtering behavior, and possibly firmware configuration. Confirm the suffix-specific data, I2C address, conversion duration, calibration sequence, and maximum input frequency against the manufacturer datasheet before approving a drop-in substitution.

The nominal 3.75 samples/s rate is not the analog input bandwidth. The internal digital filter and the selected gain establish how quickly a new conversion can settle after an input change. For dynamic sensors, calculate the required signal bandwidth against the selected conversion mode and include analog filter settling time in the acquisition schedule. This avoids mistaking a fast digital interface for a fast measurement channel.

Use the automotive-rated temperature range of -40 °C to +125 °C as a device specification rather than an automatic guarantee of board-level accuracy. Temperature can affect sensor excitation, reference behavior, resistor ratios, and analog offsets. Perform calibration at the intended operating temperature and include the complete sensing chain in the error budget when specifying measurement accuracy.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The MCP3422A6-E/SN listing identifies AEC-Q100 automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product documentation.

تاریخ تأیید داده‌ها: 2026-11-20 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MCP3422A6-E/SN MCP3422A6-E/SN datasheet MCP3422A6-E/SN datasheet pdf MCP3422A6-E/SN pinout MCP3422A6-E/SN equivalent MCP3422A6-E/SN replacement MCP3422A6-E/SN price MCP3422A6-E/SN stock MCP3422A6-E/SN 8-SOIC MCP3422A6-E/SN application circuit MCP3422A6-E/SN vs MCP3422A0-E/SN MCP3422 18-bit dual-channel ADC

قطعات و اصطلاحات مرتبط

Microchip Technology MCP3422A6-E/SN MCP3422 MCP3422A0-E/SN MCP3422A1-E/SN MCP3422A2-E/MC MCP3422A3-E/SN MCP3422A5T-E/SN analog-to-digital converter ADC delta-sigma ADC data-converter IC signal-chain IC differential input programmable gain amplifier onboard voltage reference I2C 18-bit resolution 3.75 samples/s 2.048 V reference 8-SOIC SOIC family surface-mount package pressure sensor strain gauge industrial process monitoring automotive electronics AEC-Q100
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ