MCP3422A6-E/SN - 18-Bit Dual-Channel ADC | Microchip
部品番号: MCP3422A6-E/SN ✓ 生産中MCP3422A6-E/SN 概要
An analog-to-digital converter is an integrated circuit that converts continuous analog voltage signals into digital codes for processing, measurement, or control. Delta-sigma ADCs belong to the ADC family within data-converter and signal-chain ICs. They use oversampling, digital filtering, and noise shaping to obtain high resolution without requiring a high-frequency flash-converter clock. The MCP3422 combines this measurement architecture with two differential channels, an integrated voltage reference, programmable gain, and a serial host interface.
Principal features include 18-bit resolution, two differential input channels, and a precision 2.048 V onboard reference. The converter supports 3.3 V and 5 V operation, uses an I2C interface, and provides auto-calibration and power-on reset functions. Differential measurement helps reject common-mode voltage and supply noise when the signal source is arranged symmetrically. Programmable gain allows the ADC to scale smaller sensor outputs without sacrificing use of its available input range.
The sigma-delta architecture favors low-noise, high-resolution measurements at low sample rates rather than high-speed waveform capture. The 3.75 SPS rate is appropriate for temperature, pressure, strain, load-cell, potentiometer, and slow industrial process signals. Internal offset and gain calibration improve accuracy over operating conditions, while the onboard reference reduces the number of external precision components required for moderate-accuracy systems.
Typical uses include battery-powered instrumentation, factory process monitoring, pressure and temperature sensors, low-rate data loggers, portable measurement equipment, and industrial control boards. Differential sensor inputs are especially useful when the measured quantity appears as a small voltage across a bridge or sensor pair. The I2C interface also allows the converter to share a two-wire bus with a host microcontroller or other low-speed peripherals.
When designing a board around the MCP3422A6-E/SN, route the analog inputs and reference circuitry away from switching nodes and digital return currents. Place input filtering close to the ADC pins, use a quiet analog supply path, and verify that signal common-mode voltage remains inside the device operating limits. Anti-alias filtering, input settling time, and the configured conversion period must be evaluated together rather than treating the nominal sample rate as an unrestricted bandwidth specification.
This product page combines the manufacturer device description with distributor specifications, application guidance, package information, and a drop-in-focused comparison with other MCP3422 gain and conversion-rate options. It also identifies where application-specific data must be checked in the manufacturer datasheet before schematic release or production qualification.
ドロップイン代替品: MCP3422A6-E/SN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MCP3422A6-E/SN (同一形状・フットプリント) — 相違点: Conversion Rate, Package, Differential Input Range, Operating Temperature Range, Digital Interface.
MCP3422A0-E/SN
✅ ドロップイン価格はお問い合わせください
データシートを見る →MCP3422A1-E/SN
✅ ドロップイン価格はお問い合わせください
データシートを見る →MCP3422A2-E/MC
✅ ドロップイン価格はお問い合わせください
データシートを見る →MCP3422A3-E/SN
✅ ドロップイン価格はお問い合わせください
データシートを見る →MCP3422A5T-E/SN
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MCP3422A6-E/SN 最大定格&電気的特性
| ADC Resolution | 18 bit |
| Number of Input Channels | 2 channels |
| Conversion Architecture | 1 sigma-delta ADC |
| Conversion Rate | 3.75 samples/s |
| Input Type | Differential |
| Onboard Reference Voltage | 2.048 V |
| Differential Input Range | ±2.048 V |
| Full-Scale Differential Range | 4.096 V/PGA |
| Digital Interface | I2C |
| Programmable Gain Amplifier | Available |
| 電源電圧 | 3.3 V or 5 V |
| 動作温度範囲 | -40 °C to +125 °C |
| Automotive Qualification | AEC-Q100 |
| Auto Calibration | Supported |
| Power-On Reset | Supported |
| パッケージ | 8-pin SOIC, 3.90 mm width |
| 実装タイプ | Surface mount |
| Shipping Package | Tube |
MCP3422A6-E/SN tube ピン配置ガイド
MCP3422A6-E/SN (tube パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: MCP3422A6-E/SN.
詳細は データシート をご参照ください。
主な用途
MCP3422A6-E/SN の用途: 6 件s: Pressure Sensor Acquisition, Industrial Temperature Monitoring, Battery-Powered Data Loggers, Strain and Load Cell Measurement, Process Control Instrumentation, Precision Potentiometer Monitoring.
Pressure Sensor Acquisition
MCP3422A6-E/SN fits bridge-based pressure sensing because its two differential inputs can accept a sensor signal without converting it to a single-ended signal first. The 18-bit resolution preserves small changes in millivolt-level bridge outputs, while the 2.048 V onboard reference and programmable gain provide the scaling required by many pressure transducers. At a 3.75 samples/s conversion rate, the converter is suited to stable pressure readings rather than pressure pulsations. Place input filtering close to the ADC pins and route the differential pair away from switching converters to avoid reducing the benefit of the common-mode rejection.
おすすめ
Industrial Temperature Monitoring
The MCP3422A6-E/SN is appropriate for multi-channel industrial temperature monitoring when measurements change slowly and high resolution is more valuable than rapid sampling. Two differential channels can monitor paired sensing elements or two isolated sensor inputs, and the 18-bit conversion resolution supports narrow measurement increments. Its 3.75 samples/s rate provides enough update speed for thermal processes while reducing conversion-related power demand. The operating range of -40 °C to +125 °C also supports equipment deployed across wide environmental zones, provided the external sensor, wiring, and front-end protection are appropriately rated.
おすすめ
Battery-Powered Data Loggers
MCP3422A6-E/SN is well matched to portable data loggers that periodically record slowly changing environmental or equipment measurements. Its low conversion rate of 3.75 samples/s avoids unnecessary conversion activity, while the integrated 2.048 V reference reduces the number of external precision components that would consume board space. Differential inputs are valuable for reducing sensitivity to battery-supply variation and ground offsets. A low-power host can control acquisition through I2C and keep the converter unpowered between measurements, subject to the power-on reset and startup behavior described in the manufacturer datasheet.
おすすめ
Strain and Load Cell Measurement
MCP3422A6-E/SN can digitize differential strain-gauge and load-cell outputs when the mechanical signal varies slowly. The two differential inputs support a complementary bridge arrangement, while 18-bit resolution and programmable gain help preserve small millivolt-level changes around the electrical midpoint. The 2.048 V internal reference defines the conversion scale and is suitable for ratiometric sensors operated from the same excitation source. Accurate results depend on keeping excitation and return currents away from the input traces, providing stable bridge excitation, and applying filtering that preserves the mechanical bandwidth of interest.
おすすめ
Process Control Instrumentation
MCP3422A6-E/SN supports industrial process-control modules that monitor temperature, pressure, level, or other slowly changing analog variables. Two differential channels reduce the number of separate converters when the signals are referenced to a common return, and I2C simplifies connection to a supervisory controller. The 3.75 samples/s rate is appropriate for closed-loop monitoring rather than fast control loops. For reliable operation, isolate analog and digital power paths, maintain stable sensor excitation, and apply input protection that does not compromise the differential input impedance or converter accuracy.
おすすめ
Precision Potentiometer Monitoring
MCP3422A6-E/SN can monitor mechanical potentiometers and other high-impedance dividers when the application values stable, high-resolution readings over rapid sampling. Differential inputs permit the divider to be referenced across two ADC inputs, reducing sensitivity to common-mode ground movement. The 18-bit resolution provides fine position discrimination, while programmable gain can improve use of the ADC range for restricted-angle sensors. The 3.75 samples/s rate suits position readouts that do not change materially between samples. Use an appropriate input buffer if the divider impedance could load the source or introduce excessive settling time.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MCP3422A6-E/SN — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MCP3422A0-E/SN | MCP3422A1-E/SN | MCP3422A2-E/MC | MCP3422A3-E/SN | MCP3422A5T-E/SN |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| ADC Resolution | 18 bit | 18 bit | 18 bit | 18 bit | 18 bit | 18 bit |
| Input Channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels |
| Conversion Architecture | Sigma-delta | Sigma-delta | Sigma-delta | Sigma-delta | Sigma-delta | Sigma-delta |
主な差別化要因
- Three distinct gain and conversion-rate selections use the same 8-SOIC footprint (vs MCP3422A0-E/SN)
- Target conversion mode is identified at 3.75 samples per second (vs MCP3422A1-E/SN)
- Automotive qualification and extended temperature operation (vs MCP3422A5T-E/SN)
- Integrated precision reference simplifies moderate-accuracy measurements (vs MCP3422A2-E/MC)
設計ノート
Route each differential input as a tight, continuous pair from the sensor or filter to the corresponding MCP3422A6-E/SN pins. Keep the pair away from switching-node traces, high-current return paths, and digital clock lines. Place input-series resistors and anti-alias capacitors close to the converter rather than at the sensor connector, where they would not suppress pickup entering the sensitive signal path.
Follow the manufacturer-recommended decoupling arrangement and provide a low-impedance return from the analog supply pins to the device ground. The ADC operates from 3.3 V or 5 V, but supply tolerance alone does not determine conversion accuracy: source impedance, clock and digital activity, reference stability, and input common-mode limits also affect the result. Verify these conditions at the actual board level before calibration.
Do not select the replacement solely because it has the same 8-SOIC footprint. MCP3422 suffixes can differ in gain and conversion-rate options, which changes acquisition timing, digital filtering behavior, and possibly firmware configuration. Confirm the suffix-specific data, I2C address, conversion duration, calibration sequence, and maximum input frequency against the manufacturer datasheet before approving a drop-in substitution.
The nominal 3.75 samples/s rate is not the analog input bandwidth. The internal digital filter and the selected gain establish how quickly a new conversion can settle after an input change. For dynamic sensors, calculate the required signal bandwidth against the selected conversion mode and include analog filter settling time in the acquisition schedule. This avoids mistaking a fast digital interface for a fast measurement channel.
Use the automotive-rated temperature range of -40 °C to +125 °C as a device specification rather than an automatic guarantee of board-level accuracy. Temperature can affect sensor excitation, reference behavior, resistor ratios, and analog offsets. Perform calibration at the intended operating temperature and include the complete sensing chain in the error budget when specifying measurement accuracy.
コンプライアンス情報
The MCP3422A6-E/SN listing identifies AEC-Q100 automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product documentation.