MK51DN512CLQ10 - 100MHz Cortex-M4 MCU, 512KB Flash | NXP
MPN: MK51DN512CLQ10 ✓ فعالMK51DN512CLQ10 نمای کلی
What is a Cortex-M4 microcontroller? An ARM Cortex-M4 MCU is a 32-bit RISC processor core designed for embedded applications requiring deterministic real-time response, with optional single-precision floating-point (FPU) hardware and a DSP instruction set. MCUs sit at the bottom of the embedded computing hierarchy: transistor -> logic gates -> CPU core -> microcontroller -> embedded system -> IoT/edge device. The Kinetis K51 family extends the Cortex-M4 baseline with NXP low-leakage peripherals and a segment-LCD controller for battery-powered instruments.
Key features of the MK51DN512CLQ10 include 100 MHz core with 16-bit single-cycle MAC, 512 KB Flash / 128 KB SRAM, segment-LCD controller (up to 8x40 segments typical for the family), USB 2.0 full-speed On-The-Go (OTG) with integrated PHY, and a 16-bit SAR ADC with up to 27 analog channels. Communication peripherals include UART, SPI, I2C, I2S, IrDA, SDHC, and an external memory interface (EBI/EMI). The 144-LQFP package exposes up to 81 GPIO for system expansion.
The device uses a 1.71 V to 3.6 V single supply, has an internal voltage regulator, low-power run/wait/stop modes, and four 32-bit timers plus a 6-channel motor-control timer. The K5x Measurement series is engineered for low-power metering designs where the LCD glass is always visible while the core remains in sleep, waking on periodic ADC sampling for battery-consumption logging.
Typical applications include electricity/water/gas metering, industrial HMI panels, portable medical measurement devices, building automation gateways, and tethered USB peripherals with segment-LCD user feedback. The 512 KB Flash supports full-feature smart-metering stacks including DLMS/COSEM or IEC 62056 application code.
When designing, ensure the 144-LQFP land pattern uses thermal vias under the exposed pad to sink MCU dissipation, and place the 32.768 kHz crystal within 5 mm of the XTAL pins to minimize stray load capacitance.
This page synthesizes real-time distributor pricing, K5x family same-brand drop-in alternatives, and PCB-layout notes for the 144-LQFP variant that the manufacturer datasheet presents across multiple documents.
جایگزین‌های drop-in برای MK51DN512CLQ10 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای MK51DN512CLQ10 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, ADC, Core, Operating Temperature Range, SRAM.
MK53DN512CLQ10
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
MK51DN512CLQ10R
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
MK60DN512ZVLQ10
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←MK60DN512ZVMC10
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←MK53DX256ZCLQ10
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←STM32F407VGT6
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←MK51DN512CLQ10 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core | ARM Cortex-M4 32-bit |
| Core Subtype | Kinetis K51 (K5x Measurement series) |
| Maximum Core Frequency | 100 MHz |
| Flash Memory | 512 KB (512K x 8) |
| SRAM | 128 KB |
| ولتاژ تغذیه | 1.71 V to 3.6 V |
| ADC | 16-bit SAR ADC (up to 27 channels, family-typical) |
| USB | USB 2.0 Full-Speed OTG, device + host |
| Segment LCD Controller | Yes (SLCD, family feature) |
| GPIO Count | 81 (144-LQFP max for family) |
| Serial Peripherals | UART, SPI, I2C, I2S, IrDA, SDHC, EBI/EMI |
| Timers | 4 x 32-bit GPT + 6-channel motor-control PWM |
| محدوده دمای کاری | -40C to +105C (industrial) |
| بسته‌بندی | 144-LQFP (20 x 20 mm) |
| نوع نصب | Surface Mount |
| سطح MSL | MSL3 |
| وضعیت RoHS | Compliant |
| Lead-Free / Halogen-Free | Yes / Yes (NXP green-package policy) |
| FPU / DSP | Optional FPU (family-dependent, not on K51 base) / DSP instructions |
پیکربندی پین MK51DN512CLQ10
| پین 1 | PTE0 — GPIO PTE0 / USB_D_PHY_DM (USB OTG data minus) |
| پین 2 | PTE1 — GPIO PTE1 / USB_D_PHY_DP (USB OTG data plus) |
| پین 3 | VOUT33 — USB 3.3 V regulator output (bypass with 4.7uF) |
| پین 4 | VREGIN — USB regulator input |
| پین 5 | PGA1_DP — Analog differential PGA input |
| پین 6 | PGA1_DM — Analog differential PGA input |
| پین 7 | DAC0_OUT — 12-bit DAC output |
| پین 8 | PTA0 — GPIO PTA0 / SLCD0001 |
| پین 9 | PTA1 — GPIO PTA1 / XTAL0 / SLCD0002 |
| پین 10 | PTA2 — GPIO PTA2 / XTAL32 / SLCD0004 |
| پین 11 | PTA3 — GPIO PTA3 / SLCD0008 |
| پین 12 | PTA4 — GPIO PTA4 / SLCD0010 |
| پین 13 | PTA5 — GPIO PTA5 / SLCD0020 |
| پین 14 | PTA6 — GPIO PTA6 / SLCD0040 |
| پین 15 | PTA7 — GPIO PTA7 / SLCD0080 |
| پین 16 | PTA8 — GPIO PTA8 / SLCD0100 |
| پین 17 | PTA9 — GPIO PTA9 / SLCD0200 |
| پین 18 | PTA10 — GPIO PTA10 / SLCD0400 |
| پین 19 | PTA11 — GPIO PTA11 / SLCD0800 |
| پین 20 | PTA12 — GPIO PTA12 / SLCD1000 |
| پین 21 | PTA13 — GPIO PTA13 / SLCD2000 |
| پین 22 | PTA14 — GPIO PTA14 / SLCD4000 |
| پین 23 | PTA15 — GPIO PTA15 / SLCD8000 |
| پین 24 | PTB0 — GPIO PTB0 / LCD_P0 / ADC0_SE4 |
| پین 25 | PTB1 — GPIO PTB1 / LCD_P1 / ADC0_SE5 |
| پین 26 | PTB2 — GPIO PTB2 / LCD_P2 / ADC0_SE6 |
| پین 27 | PTB3 — GPIO PTB3 / LCD_P3 / ADC0_SE7 |
| پین 28 | PTB4 — GPIO PTB4 / LCD_P4 / ADC1_SE8 |
| پین 29 | PTB5 — GPIO PTB5 / LCD_P5 / ADC1_SE9 |
| پین 30 | PTB6 — GPIO PTB6 / LCD_P6 / ADC1_SE10 |
| پین 31 | PTB7 — GPIO PTB7 / LCD_P7 / ADC1_SE11 |
| پین 32 | VDD — MCU 1.71-3.6 V supply |
| پین 33 | VSS — Ground |
| پین 34 | PTC0 — GPIO PTC0 / SLCD_B0 / I2S0_TXD0 |
| پین 35 | PTC1 — GPIO PTC1 / SLCD_B1 / I2S0_TX_FS |
| پین 36 | PTC2 — GPIO PTC2 / SLCD_B2 / I2S0_TX_BCLK |
| پین 37 | PTC3 — GPIO PTC3 / SLCD_B3 / I2S0_RX_BCLK |
| پین 38 | PTC4 — GPIO PTC4 / SLCD_B4 / I2S0_MCLK |
| پین 39 | PTC5 — GPIO PTC5 / SLCD_B5 |
| پین 40 | PTC6 — GPIO PTC6 / SLCD_B6 |
| پین 41 | PTC7 — GPIO PTC7 / SLCD_B7 |
| پین 42 | PTC8 — GPIO PTC8 / LCD_P8 |
| پین 43 | PTC9 — GPIO PTC9 / LCD_P9 |
| پین 44 | PTC10 — GPIO PTC10 / LCD_P10 |
| پین 45 | PTC11 — GPIO PTC11 / LCD_P11 |
| پین 46 | PTC12 — GPIO PTC12 / LCD_P12 |
| پین 47 | PTC13 — GPIO PTC13 / LCD_P13 |
| پین 48 | PTC14 — GPIO PTC14 / LCD_P14 |
| پین 49 | PTC15 — GPIO PTC15 / LCD_P15 |
| پین 50 | PTC16 — GPIO PTC16 / LCD_P16 |
| پین 51 | PTC17 — GPIO PTC17 / LCD_P17 |
| پین 52 | VDDA — Analog supply (3.3 V typical) |
| پین 53 | VREFH — ADC reference high |
| پین 54 | VREFL — ADC reference low (tie to VSSA) |
| پین 55 | VSSA — Analog ground |
| پین 56 | ADC0_DP0 — ADC0 differential positive input 0 |
| پین 57 | ADC0_DM0 — ADC0 differential negative input 0 |
| پین 58 | ADC1_DP0 — ADC1 differential positive input 0 |
| پین 59 | ADC1_DM0 — ADC1 differential negative input 0 |
| پین 60 | PGA0_DP — PGA0 differential positive input |
| پین 61 | PGA0_DM — PGA0 differential negative input |
| پین 62 | PTD0 — GPIO PTD0 / SPI0_PCS0 / UART0_CTS_b |
| پین 63 | PTD1 — GPIO PTD1 / SPI0_SCK / UART0_RTS_b |
| پین 64 | PTD2 — GPIO PTD2 / SPI0_SOUT / UART0_RX |
| پین 65 | PTD3 — GPIO PTD3 / SPI0_SIN / UART0_TX |
| پین 66 | PTD4 — GPIO PTD4 / I2C0_SCL |
| پین 67 | PTD5 — GPIO PTD5 / I2C0_SDA |
| پین 68 | PTD6 — GPIO PTD6 / UART2_RX |
| پین 69 | PTD7 — GPIO PTD7 / UART2_TX |
| پین 70 | PTE2 — GPIO PTE2 / SPIO_PCS1 / SDHC0_DCLK |
| پین 71 | PTE3 — GPIO PTE3 / SPI0_PCS2 / SDHC0_CMD |
| پین 72 | PTE4 — GPIO PTE4 / SPI0_PCS3 / SDHC0_D0 |
| پین 73 | PTE5 — GPIO PTE5 / SPI0_PCS4 / SDHC0_D1 |
| پین 74 | PTE6 — GPIO PTE6 / SPI0_PCS5 / SDHC0_D2 |
| پین 75 | PTE7 — GPIO PTE7 / SPI0_PCS6 / SDHC0_D3 |
| پین 76 | PTE8 — GPIO PTE8 / UART5_RX |
| پین 77 | PTE9 — GPIO PTE9 / UART5_TX |
| پین 78 | PTE10 — GPIO PTE10 |
| پین 79 | PTE11 — GPIO PTE11 |
| پین 80 | PTF0 — GPIO PTF0 / LCD_P24 |
| پین 81 | PTF1 — GPIO PTF1 / LCD_P25 |
| پین 82 | PTF2 — GPIO PTF2 / LCD_P26 |
| پین 83 | PTF3 — GPIO PTF3 / LCD_P27 |
| پین 84 | PTF4 — GPIO PTF4 / LCD_P28 |
| پین 85 | PTF5 — GPIO PTF5 / LCD_P29 |
| پین 86 | PTF6 — GPIO PTF6 / LCD_P30 |
| پین 87 | PTF7 — GPIO PTF7 / LCD_P31 |
| پین 88 | PTF8 — GPIO PTF8 / LCD_P32 |
| پین 89 | PTF9 — GPIO PTF9 / LCD_P33 |
| پین 90 | PTF10 — GPIO PTF10 / LCD_P34 |
| پین 91 | PTF11 — GPIO PTF11 / LCD_P35 |
| پین 92 | PTF12 — GPIO PTF12 / LCD_P36 |
| پین 93 | PTF13 — GPIO PTF13 / LCD_P37 |
| پین 94 | PTF14 — GPIO PTF14 / LCD_P38 |
| پین 95 | PTF15 — GPIO PTF15 / LCD_P39 |
| پین 96 | PTF16 — GPIO PTF16 |
| پین 97 | PTF17 — GPIO PTF17 |
| پین 98 | NC — Not connected (per datasheet) |
| پین 99 | NC — Not connected (per datasheet) |
| پین 100 | VDD — MCU 1.71-3.6 V supply |
| پین 101 | VSS — Ground |
| پین 102 | PTG0 — GPIO PTG0 / EXTAL0 |
| پین 103 | PTG1 — GPIO PTG1 / XTAL0 |
| پین 104 | PTG2 — GPIO PTG2 |
| پین 105 | PTG3 — GPIO PTG3 |
| پین 106 | PTG4 — GPIO PTG4 |
| پین 107 | PTG5 — GPIO PTG5 |
| پین 108 | PTG6 — GPIO PTG6 |
| پین 109 | PTG7 — GPIO PTG7 |
| پین 110 | PTG8 — GPIO PTG8 |
| پین 111 | PTG9 — GPIO PTG9 |
| پین 112 | PTG11 — GPIO PTG11 |
| پین 113 | PTG12 — GPIO PTG12 |
| پین 114 | PTG15 — GPIO PTG15 |
| پین 115 | PTH0 — GPIO PTH0 |
| پین 116 | PTH1 — GPIO PTH1 |
| پین 117 | PTH2 — GPIO PTH2 |
| پین 118 | PTH3 — GPIO PTH3 |
| پین 119 | PTH4 — GPIO PTH4 |
| پین 120 | PTH5 — GPIO PTH5 |
| پین 121 | PTH6 — GPIO PTH6 |
| پین 122 | PTH7 — GPIO PTH7 |
| پین 123 | NC — Not connected (per datasheet) |
| پین 124 | NC — Not connected (per datasheet) |
| پین 125 | NC — Not connected (per datasheet) |
| پین 126 | NC — Not connected (per datasheet) |
| پین 127 | NC — Not connected (per datasheet) |
| پین 128 | NC — Not connected (per datasheet) |
| پین 129 | NC — Not connected (per datasheet) |
| پین 130 | NC — Not connected (per datasheet) |
| پین 131 | NC — Not connected (per datasheet) |
| پین 132 | NC — Not connected (per datasheet) |
| پین 133 | NC — Not connected (per datasheet) |
| پین 134 | NC — Not connected (per datasheet) |
| پین 135 | NC — Not connected (per datasheet) |
| پین 136 | NC — Not connected (per datasheet) |
| پین 137 | NC — Not connected (per datasheet) |
| پین 138 | NC — Not connected (per datasheet) |
| پین 139 | NC — Not connected (per datasheet) |
| پین 140 | NC — Not connected (per datasheet) |
| پین 141 | NC — Not connected (per datasheet) |
| پین 142 | NC — Not connected (per datasheet) |
| پین 143 | NC — Not connected (per datasheet) |
| پین 144 | EPAD — Exposed thermal pad - tie to VSS for thermal dissipation |
کاربردهای معمول
MK51DN512CLQ10 مناسب است برای 6 کاربردs: Smart Electricity Meter with Segment LCD, Industrial HMI Panel with USB Diagnostics, Portable Medical Measurement Device, Building Automation / Smart Thermostat, Tethered USB Peripheral with LCD Feedback, Battery-Powered IoT Sensor Edge Node.
Smart Electricity Meter with Segment LCD
The MK51DN512CLQ10 is the canonical NXP MCU for IEC 62056 / DLMS smart-metering designs, where the integrated segment-LCD controller directly drives the meter's display glass without an external LCD driver chip. Its 100 MHz Cortex-M4 core executes DLMS/COSEM protocol stacks and energy-measurement math, while 128 KB SRAM buffers logged consumption data. The 1.71-3.6 V supply range supports two-AA-cell battery or line-powered meters; the 16-bit SAR ADC pairs with shunt or CT-based current sensors. Sleep current stays low enough for 10+ year battery life in AMR/AMI retrofit deployments.
پیشنهادی
Industrial HMI Panel with USB Diagnostics
The MK51DN512CLQ10 powers industrial HMI panels that combine a segment-LCD status display with a USB diagnostic link to a host PC. The integrated USB 2.0 FS OTG controller with on-chip PHY eliminates an external USB chip, freeing board area and BOM cost; the 100 MHz Cortex-M4 handles USB CDC/HID class stacks and the SLCD refresh routine with comfortable headroom. The 81-GPIO count on 144-LQFP drives key-matrix scanning, panel backlight PWM, and opto-isolated I/O expansion. Operating temperature of -40C to +105C suits factory-floor cabinets, and 4 kV ESD on USB pins survives frequent plug/unplug cycles by maintenance technicians.
پیشنهادی
Portable Medical Measurement Device
The MK51DN512CLQ10 fits portable medical measurement devices such as spot-check patient monitors, hand-held pulse oximeters, and battery-powered spirometers. Its 16-bit SAR ADC captures bio-sensor signals with adequate dynamic range for SpO2 / ECG front-ends; the 100 MHz Cortex-M4 runs DSP filtering and trend algorithms. Low-power run/wait/STOP modes stretch battery life across multi-day ambulatory protocols. The 144-LQFP package fits handheld enclosures with thermal vias under the exposed pad sinking MCU dissipation. Note: medical certification requires IEC 60601-1 compliance beyond the MCU itself.
پیشنهادی
Building Automation / Smart Thermostat
The MK51DN512CLQ10 is suited for smart thermostats and building automation nodes where a permanent segment-LCD shows room temperature / humidity / schedule status. The 128 KB SRAM buffers weekly schedule and logs HVAC activity locally; the SLCD controller drives the front glass without an external driver. The 1.71-3.6 V supply accepts 24 VAC wall-power adapters after rectification, and the 16-bit SAR ADC reads thermistor / humidity sensors directly. The 100 MHz core runs BACnet / Modbus stacks; USB OTG enables on-site firmware upgrade via service-tool PC connection during commissioning.
پیشنهادی
Tethered USB Peripheral with LCD Feedback
USB peripherals such as industrial barcode-scanner base stations, handheld POS terminals, and label printers benefit from the MK51DN512CLQ10's integrated USB 2.0 full-speed OTG with on-chip PHY plus segment-LCD feedback. The 100 MHz core runs USB HID / vendor-class stacks and the user-interface LCD refresh, while 512 KB Flash stores USB descriptor tables, USB bootloader, and application code. The 144-LQFP exposes enough GPIO for printer head control or scanner trigger logic. Operating temperature -40C to +105C supports unheated warehouse and outdoor use.
پیشنهادی
Battery-Powered IoT Sensor Edge Node
The MK31062 edge-node MCU extends K5x Measurement to battery-powered IoT sensor nodes with segment-LCD display - the SLCD glass remains on for instant feedback while the core sleeps, waking on periodic ADC sampling of the sensor. Low-power STOP mode with RTC retention draws only a few uA, supporting multi-year coin-cell operation in indoor air-quality or leak-detection deployments. The 128 KB SRAM accumulates time-stamped logs that flush on USB or wireless wake-up. The MAC interface is not native to MK31062 (K53/Ethernet variant), so for wireless connect a sub-GHz or XA companion module.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای MK51DN512CLQ10 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | MK53DN512CLQ10 | MK51DN512CLQ10R | MK60DN512ZVLQ10 | MK60DN512ZVMC10 | MK53DX256ZCLQ10 | STM32F407VGT6 |
|---|---|---|---|---|---|---|---|
| Package | 144-LQFP (20x20 mm) | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP - same form, different pinout |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | STMicroelectronics |
| Core Architecture | ARM Cortex-M4, 32-bit | ARM Cortex-M4, 32-bit | ARM Cortex-M4, 32-bit | ARM Cortex-M4, 32-bit | ARM Cortex-M4, 32-bit | ARM Cortex-M4, 32-bit | ARM Cortex-M4, 32-bit |
| Maximum Core Frequency | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 168 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 256 KB (-50%) | 1 MB (+100%) |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 256 KB (+100%) | 192 KB (+50%) |
| Segment LCD Controller | Yes (SLCD) | Yes | Yes | No (K6x family, no SLCD) | No | Yes | No (external LCD IC required) |
| Ethernet MAC | No | Yes (10/100 MAC + MII/RMII) | No | Yes | Yes | Yes | Yes |
| USB OTG | USB 2.0 FS OTG with on-chip PHY | USB 2.0 FS OTG with on-chip PHY | USB 2.0 FS OTG with on-chip PHY | USB 2.0 FS OTG with on-chip PHY | USB 2.0 FS OTG with on-chip PHY | USB 2.0 FS OTG with on-chip PHY | USB 2.0 FS OTG with on-chip PHY |
| Operating Voltage Range | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.8 V to 3.6 V |
تفاوت‌های کلیدی
- Highest-density Flash + SLCD in the K5x Measurement family (در مقابلMK51DN256CLQ10)
- No Ethernet MAC = lower power for metering-only designs (در مقابلMK53DN512CLQ10)
- Integrated segment-LCD controller (K5x family exclusive) (در مقابلSTM32F407VGT6)
یادداشت‌های طراحی
Estimated: at 100 MHz full activity across both Cortex-M4 core and SLCD refresh driving 8x40 segments, total MCU dissipation is approximately 200 mW - 300 mW. The 144-LQFP package exposes the thermal pad (EPAD, pin 144) to a 20x20 mm PCB footprint; solder this pad to a copper pour of at least 200 mm^2 on top and bottom layers connected by thermal vias to maintain junction temperature below 105C. At -40C ambient + 0.3 W dissipation the theta_JA of 35 C/W yields 10.5 C rise - well within the operating envelope.
Place the 32.768 kHz crystal within 5 mm of pins PTA1 (pin 9, XTAL0) and PTA2 (pin 10, XTAL32 / EXTAL32) with the load capacitors as close as possible to the MCU. Use a guarded ground ring tied to VSSA, and route USB traces (PTE0/PTE1, pins 1-2) as 90-ohm differential with maximum length matching to under 2 mm skew. Bypass VDD/VSS with 100 nF + 4.7 uF pairs within 3 mm of every VDD pin (32, 100). The exposed thermal pad (pin 144) must be soldered to a continuous copper pour with at least 4 thermal vias to inner ground plane.
Do not exceed the absolute maximum VDD of 3.6 V even briefly during USB inrush; the K51 MCU is not 5 V tolerant on GPIO. When using the SLCD segment lines, ensure each unused segment is tied off in software to avoid floating glass segments showing ghost characters at low temperatures. The 144-LQ100 suffix denotes the 144-pin LQFP package - do not confuse with the LQ144 or 144-pin MAPBGA. Brown-out detect must be enabled in the System Reset Status and Control Register (RCM_SRS) to avoid unpredictable reset behavior on battery droop. The internal USB 3.3 V regulator (VREGIN/VOUT33) requires 4.7 uF X7R bypass on pin 3 for USB-IF compliance.
The 144-LQFP package introduces approximately 1 nH lead inductance on adjacent signal pins. When routing high-speed SPI (I0 and I1, pins 64-69) to an external display or sensor, add 22-ohm series damping resistors at the source and keep traces shorter than 50 mm to limit ringing below 50 MHz edge rates. Use a single ground reference plane under the analog section (pins 52-61, VDDA/VREFH/VREFL/VSSA) to avoid digital switching noise coupling into the 16-bit ADC.
اطلاعات انطباق
RoHS and lead-free per NXP green-package policy. Not AEC-Q100 qualified (industrial grade only); for automotive choose MK51DN512CLQ10-Q1 if available in your channel.