PIC16C65B-04I/PQ - 8-Bit 4MHz MCU 7KB OTP 33 I/O | Microchip
MPN: PIC16C65B-04I/PQ ✗ پایان تولیدPIC16C65B-04I/PQ نمای کلی
A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, and peripheral interfaces. Within the broader semiconductor taxonomy, an MCU sits below microprocessor (MPU) and above DSP and ASIC in system-integration depth. The PIC16CXX mid-range family is one of Microchip's foundational 8-bit lines, characterized by a 14-bit instruction word and Harvard architecture - meaning separate program and data buses - delivering deterministic interrupt latency and compact code density relative to von-Neumann 8-bit alternatives.
Key features include 33 digital I/O pins arranged across multiple ports (PORTB through PORTE), two 8-bit timer/counters plus one 16-bit timer/counter, a synchronous serial port (SSP) supporting SPI and I2C master/slave modes, and a brown-out reset (BOR) circuit. The industrial temperature grade ('I' suffix) guarantees operation from -40 C to +85 C, while the 04 speed grade denotes a 4 MHz maximum oscillator input. The OTP memory architecture supports prototype runs and low-to-medium volume production where flash reprogrammability is not required.
Architecturally, the PIC16C65B uses a Harvard bus with a 14-bit program word and 8-bit data path, achieving single-cycle instruction execution except for branches. The 4 MHz oscillator combined with a 4:1 internal divider yields a 1 MHz instruction clock, with 1 MIPS sustained throughput. Brown-out reset, watchdog timer, and power-on reset are integrated, reducing external component count in cost-sensitive designs.
Typical applications include industrial automation controllers, embedded instrumentation with the on-chip ADC, motor control via the CCP PWM outputs, point-of-sale terminals, and legacy embedded systems where PIC16C-series firmware is already deployed. The OTP memory makes the device well-suited to production runs once firmware is finalized.
When designing with this part, verify that the 4 MHz oscillator limit is compatible with required throughput, and ensure the OTP memory strategy aligns with production volume - if firmware updates are anticipated, choose the PIC16F-series flash equivalent. The MQFP package requires a minimum 1 oz copper pour and thermal vias for reliable operation above 25 C ambient.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
جایگزین‌های drop-in برای PIC16C65B-04I/PQ — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای PIC16C65B-04I/PQ (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Timers, Package, Core Architecture, Mounting Type, CCP Modules.
PIC16C65B-04E/PQ
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16C65B-04/PQ
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16C65A-04I/PQ
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16C65AT-04I/PQ
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16C65A-20I/PQ
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16C65B-04I/PQ حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core Architecture | 8-bit PIC mid-range (Harvard) |
| Instruction Set Width | 14-bit |
| Program Memory Type | OTP (One-Time-Programmable) |
| Program Memory Size | 7 KB (4K x 14 words) |
| RAM Size | 192 bytes |
| حداکثر فرکانس کلاک | 4 MHz |
| Instruction Throughput | 1 MIPS |
| I/O Pins | 33 |
| ADC Channels | 5 x 8-bit (on 'B' silicon) |
| Timers | Two 8-bit + one 16-bit |
| CCP Modules | 2 |
| Communication Peripherals | USART, SSP (SPI / I2C), Parallel Slave Port |
| ولتاژ تغذیه | 4.0 V to 6.0 V |
| دمای کاری | -40 C to +85 C (Industrial, 'I' suffix) |
| بسته‌بندی | 44-pin MQFP (10 x 10 mm) |
| نوع نصب | Surface Mount |
| Speed Grade | 04 (4 MHz max) |
پیکربندی پین PIC16C65B-04I/PQ
| پین 1 | MCLR/VPP — Master Clear (reset) input / programming voltage |
| پین 2 | RA0/AN0 — PORTA bit 0 / Analog input 0 |
| پین 3 | RA1/AN1 — PORTA bit 1 / Analog input 1 |
| پین 4 | RA2/AN2 — PORTA bit 2 / Analog input 2 |
| پین 5 | RA3/AN3/VREF — PORTA bit 3 / Analog input 3 / ADC voltage reference |
| پین 6 | RA4/T0CKI — PORTA bit 4 / Timer 0 clock input |
| پین 7 | RA5/AN4/SS — PORTA bit 5 / Analog input 4 / SPI slave select |
| پین 8 | VSS — Ground |
| پین 9 | OSC1/CLKIN — Oscillator crystal input / external clock |
| پین 10 | OSC2/CLKOUT — Oscillator crystal output / clock output |
| پین 11 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer 1 oscillator output / Timer 1 clock input |
| پین 12 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer 1 oscillator input / CCP2 output |
| پین 13 | RC2/CCP1 — PORTC bit 2 / CCP1 output |
| پین 14 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| پین 15 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| پین 16 | RC5/SDO — PORTC bit 5 / SPI data out |
| پین 17 | RC6/TX/CK — PORTC bit 6 / USART TX / USART clock |
| پین 18 | RC7/RX/DT — PORTC bit 7 / USART RX / USART data |
| پین 19 | VSS — Ground |
| پین 20 | VDD — Positive supply voltage |
| پین 21 | RB0/INT — PORTB bit 0 / External interrupt |
| پین 22 | RB1 — PORTB bit 1 |
| پین 23 | RB2 — PORTB bit 2 |
| پین 24 | RB3 — PORTB bit 3 |
| پین 25 | RB4 — PORTB bit 4 |
| پین 26 | RB5 — PORTB bit 5 |
| پین 27 | RB6/PGC — PORTB bit 6 / ICSP clock |
| پین 28 | RB7/PGD — PORTB bit 7 / ICSP data |
| پین 29 | VSS — Ground |
| پین 30 | VDD — Positive supply voltage |
| پین 31 | VSS — Ground |
| پین 32 | RD0 — PORTD bit 0 (parallel slave port data) |
| پین 33 | RD1 — PORTD bit 1 (parallel slave port data) |
| پین 34 | RD2 — PORTD bit 2 (parallel slave port data) |
| پین 35 | RD3 — PORTD bit 3 (parallel slave port data) |
| پین 36 | RD4 — PORTD bit 4 (parallel slave port data) |
| پین 37 | RD5 — PORTD bit 5 (parallel slave port data) |
| پین 38 | RD6 — PORTD bit 6 (parallel slave port data) |
| پین 39 | RD7 — PORTD bit 7 (parallel slave port data) |
| پین 40 | RE0/RD/AN5 — PORTE bit 0 / parallel slave port read / Analog input 5 |
| پین 41 | RE1/WR/AN6 — PORTE bit 1 / parallel slave port write / Analog input 6 |
| پین 42 | RE2/CS/AN7 — PORTE bit 2 / parallel slave port chip select / Analog input 7 |
| پین 43 | VDD — Positive supply voltage |
| پین 44 | VSS — Ground |
کاربردهای معمول
PIC16C65B-04I/PQ مناسب است برای 6 کاربردs: Industrial Automation Controller, Embedded Instrumentation with ADC, Motor Control with CCP PWM, Point-of-Sale Terminal, Legacy System Maintenance, Educational and Training Boards.
Industrial Automation Controller
The PIC16C65B-04I/PQ fits industrial PLC and machine controller boards where its 33 digital I/O pins, two CCP/PWM modules, and 5-channel 8-bit ADC directly drive sensor inputs, relay outputs, and PWM-controlled valves or motors. The 4 MHz throughput is sufficient for sequencing relay logic and reading analog process variables at sub-kHz rates. Industrial -40 C to +85 C temperature rating supports factory-floor enclosures without additional thermal conditioning. Drop-in compatibility with PIC16C65B-04/PQ enables stocking a single PCB for both commercial and industrial variants.
پیشنهادی
Embedded Instrumentation with ADC
The PIC16C65B-04I/PQ's 5-channel 8-bit on-chip ADC eliminates an external converter in digital panel meters, weigh scales, and process indicators. Combined with the I2C/SPI SSP for sensor interfacing and USART for data logging output, the device functions as a complete single-chip measurement subsystem. The 192-byte RAM supports local data buffering before UART transmission. Industrial temperature rating suits outdoor and uncontrolled-environment deployments.
پیشنهادی
Motor Control with CCP PWM
The two on-chip Capture/Compare/PWM modules of the PIC16C65B-04I/PQ drive brushed DC motor speed control and small stepper sequencing in appliance, fan, and pump controllers. The 33 I/O pins handle direction relays, enable lines, and Hall-effect sensor inputs. At 4 MHz the PWM frequency is suitable for sub-10 kHz motor drive, well within audible band limits for low-noise applications. The industrial temperature grade supports HVAC and white-goods deployments.
پیشنهادی
Point-of-Sale Terminal
POS terminals and electronic cash registers use the PIC16C65B-04I/PQ for keyboard scanning, display driving, and serial communication to receipt printers via the USART. The 7 KB OTP program memory fits legacy firmware, and the 33 I/O pins accommodate 4x4 key matrices plus LCD interface lines. The 4 MHz throughput is adequate for transaction processing rates typical of retail terminals. Industrial temperature grade handles variable store environments.
پیشنهادی
Legacy System Maintenance
The PIC16C65B-04I/PQ is maintained in production lines supporting installed equipment where firmware compatibility is mandatory. Customers with field-deployed PIC16C65B firmware continue sourcing this part for repair and refurbishment. The OTP memory prevents accidental firmware corruption during board swap. Industrial temperature rating matches the original deployment environment. Distributors continue stocking the part despite Microchip's obsolete classification for this aftermarket support role.
پیشنهادی
Educational and Training Boards
Universities and embedded-systems training programs use the PIC16C65B-04I/PQ in microcontroller teaching laboratories because the mid-range 14-bit instruction set illustrates fundamental MCU concepts without the complexity of modern peripherals. The 44-pin MQFP package is widely accepted by academic soldering workstations, and the OTP architecture forces students to verify code before programming. The 4 MHz speed grade keeps timing analysis tractable for introductory coursework.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای PIC16C65B-04I/PQ — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | PIC16C65B-04E/PQ | PIC16C65B-04/PQ | PIC16C65A-04I/PQ | PIC16C65AT-04I/PQ | PIC16C65A-20I/PQ |
|---|---|---|---|---|---|---|
| Package | 44-pin MQFP (10x10 mm) | 44-pin MQFP (10x10 mm) - same | 44-pin MQFP (10x10 mm) - same | 44-pin MQFP (10x10 mm) - same | 44-pin MQFP (10x10 mm) - same | 44-pin MQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 20 MHz |
| Program Memory | 7 KB OTP | 7 KB OTP | 7 KB OTP | 7 KB OTP | 7 KB OTP | 7 KB OTP |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +125 C (Extended) | 0 C to +70 C (Commercial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) |
| ADC Channels | 5 x 8-bit | 5 x 8-bit | 5 x 8-bit | None | None | None |
| Parallel Slave Port | Yes | Yes | Yes | No | No | No |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
تفاوت‌های کلیدی
- Integrated 5-channel 8-bit ADC on B silicon (در مقابلPIC16C65A-04I/PQ)
- Parallel Slave Port for external bus interface (در مقابلPIC16C65A-04I/PQ)
- Industrial temperature range vs commercial-only alternative (در مقابلPIC16C65B-04/PQ)
یادداشت‌های طراحی
Estimated: At 4 MHz clock with all peripherals active and 33 I/O pins loaded at typical CMOS input levels, the PIC16C65B-04I/PQ draws approximately 10-15 mA from a 5 V supply, dissipating roughly 50-75 mW. Place a 100 nF decoupling capacitor within 5 mm of each VDD pin and a 10 uF bulk capacitor at the board supply entry. The four VDD pins (20, 30, 31, 43) and four VSS pins (8, 19, 29, 31) must all be connected for proper operation.
The 44-pin MQFP package has 0.8 mm pitch leads; the PCB land pattern must follow IPC-7351 MQFP standards with 0.4 mm wide pads and 1.5 mm pad length. Route signals on inner layers only; keep the area beneath the package free of traces to allow post-solder inspection. Add a thermal pad pattern to the exposed die attach pad even though the MQFP-44 is not a true no-lead package, since the die-attach paddle improves heat spreading.
The PIC16C65B silicon requires a precise programming sequence for OTP memory; using a generic device programmer without the PIC16C65B device file will fail verification. Brown-out reset must be enabled in the configuration word for industrial deployments, or the device may execute corrupted code at supply-edge transitions. The MCLR pin cannot be left floating - tie through a 10 kohm pull-up to VDD to prevent spurious resets.
اطلاعات انطباق
Legacy OTP MQFP package is not lead-free; not AEC-Q100 qualified (consumer/industrial grade only). REACH status compliant per Microchip product declaration. For RoHS-compliant equivalent, choose PIC16F877A-20I/PQ.
