PIC32MX564F064H-V/MR - 80MHz 32-bit MCU 64KB Flash USB OTG | Microchip
MPN: PIC32MX564F064H-V/MR ✓ فعالPIC32MX564F064H-V/MR نمای کلی
A 32-bit microcontroller (MCU) is a programmable processor that integrates a CPU core, memory, and peripherals on a single die. Within the semiconductor hierarchy, PIC32MX devices sit under Microcontrollers -> Integrated Circuits -> Semiconductors. The PIC32MX5xx family specifically targets USB-enabled embedded applications, combining a MIPS32 M4K core with on-chip USB OTG, CAN, and 10-bit ADC, all managed by an integrated DMA controller for low-overhead peripheral data movement.
Key features include 64 KB (64K x 8) Flash program memory, 32 KB SRAM, 80 MHz maximum CPU clock, USB On-The-Go (OTG) full-speed and low-speed transceiver, a 10-bit 1 Msps ADC with up to 16 channels, DMA with multiple channels for offloading CPU transfers, and configurable I/O. The 64-VQFN (9x9 mm) package offers a low-profile surface-mount footprint suitable for compact embedded designs.
Architecturally, the PIC32MX564 uses the MIPS32 M4K core with 5-stage pipeline, Harvard cache, and a peripheral bus that connects USB, ADC, SPI, I2C, UART, and CAN modules to the DMA engine. This architecture delivers deterministic interrupt latency and 1.56 DMIPS/MHz, which is sufficient for USB stack processing, motor control loops, and basic signal processing without external logic.
Typical applications include USB peripherals (HID, CDC, MSD), industrial control with CAN, embedded graphics controllers, low-cost sensor hubs, and consumer devices that need on-board USB connectivity. The integrated USB OTG PHY eliminates an external transceiver and reduces BOM cost.
When designing with this device, allocate sufficient decoupling on VDD/VSS pairs (typically 100 nF per pin) and keep the 80 MHz trace lengths short to avoid EMI. The 64-VQFN package exposes a thermal pad that must be soldered to a continuous ground plane for thermal dissipation and electrical reference.
This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes not found in the manufacturer datasheet. XAIPART cross-references the PIC32MX564F064H family against same-package Microchip variants and cross-brand MCU options for sourcing flexibility.
جایگزین‌های drop-in برای PIC32MX564F064H-V/MR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای PIC32MX564F064H-V/MR (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در ADC, Package, Operating Temperature, Operating Temperature Range, USB.
PIC32MX564F064H-I/MR
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MX564F064HT-V/MR
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MX564F064HT-I/MR
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MX564F128H-I/MR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PIC32MX534F064H-I/MR
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MX470F512H-I/MR
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MX564F064H-V/MR حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core Architecture | MIPS32 M4K |
| Family | PIC32MX5xx |
| عرض گذرگاه داده | 32-bit |
| Maximum CPU Frequency | 80 MHz |
| Program Memory (Flash) | 64 KB (64K x 8) |
| SRAM | 32 KB |
| USB Interface | USB OTG (Full-Speed / Low-Speed) |
| ADC | 10-bit, up to 16 channels |
| DMA Channels | Yes (multiple) |
| بسته‌بندی | 64-pin VQFN (9x9 mm) |
| نوع نصب | Surface Mount |
| دمای کاری | -40C to +105C |
| Temperature Grade (V suffix) | Extended -40C to +105C |
| Supply Voltage (VDD) | 2.3 V to 3.6 V |
| وضعیت RoHS | Compliant |
| Lead-Free | Yes |
پیکربندی پین PIC32MX564F064H-V/MR
| پین 1 | RG15 — General purpose I/O |
| پین 2 | VDD — Supply voltage |
| پین 3 | RA0 — General purpose I/O / analog input |
| پین 4 | RA1 — General purpose I/O / analog input |
| پین 5 | RA2 — General purpose I/O / analog input |
| پین 6 | RA3 — General purpose I/O / analog input |
| پین 7 | RA4 — General purpose I/O / analog input |
| پین 8 | RA5 — General purpose I/O / analog input |
| پین 9 | RA6 — General purpose I/O / analog input |
| پین 10 | RA7 — General purpose I/O / analog input |
| پین 11 | RB0 — General purpose I/O / programming |
| پین 12 | RB1 — General purpose I/O / programming |
| پین 13 | RB2 — General purpose I/O |
| پین 14 | RB3 — General purpose I/O |
| پین 15 | RB4 — General purpose I/O |
| پین 16 | RB5 — General purpose I/O |
| پین 17 | RB6 — General purpose I/O / programming clock |
| پین 18 | RB7 — General purpose I/O / programming data |
| پین 19 | RB8 — General purpose I/O |
| پین 20 | RB9 — General purpose I/O |
| پین 21 | RB10 — General purpose I/O |
| پین 22 | RB11 — General purpose I/O |
| پین 23 | VSS — Ground |
| پین 24 | RB12 — General purpose I/O |
| پین 25 | RB13 — General purpose I/O |
| پین 26 | RB14 — General purpose I/O |
| پین 27 | RB15 — General purpose I/O |
| پین 28 | RC1 — General purpose I/O |
| پین 29 | RC2 — General purpose I/O |
| پین 30 | RC3 — General purpose I/O |
| پین 31 | RC4 — General purpose I/O |
| پین 32 | VSS — Ground |
| پین 33 | VDD — Supply voltage |
| پین 34 | RD0 — General purpose I/O |
| پین 35 | RD1 — General purpose I/O |
| پین 36 | RD2 — General purpose I/O |
| پین 37 | RD3 — General purpose I/O |
| پین 38 | RD4 — General purpose I/O |
| پین 39 | RD5 — General purpose I/O |
| پین 40 | RD6 — General purpose I/O |
| پین 41 | RD7 — General purpose I/O |
| پین 42 | RD8 — General purpose I/O |
| پین 43 | RD9 — General purpose I/O |
| پین 44 | RD10 — General purpose I/O |
| پین 45 | RD11 — General purpose I/O |
| پین 46 | VSS — Ground |
| پین 47 | VDD — Supply voltage |
| پین 48 | RD12 — General purpose I/O |
| پین 49 | RD13 — General purpose I/O |
| پین 50 | RD14 — General purpose I/O |
| پین 51 | RD15 — General purpose I/O |
| پین 52 | RF0 — General purpose I/O |
| پین 53 | RF1 — General purpose I/O |
| پین 54 | RG0 — General purpose I/O |
| پین 55 | RG1 — General purpose I/O |
| پین 56 | RG2 — General purpose I/O |
| پین 57 | RG3 — General purpose I/O |
| پین 58 | RG6 — General purpose I/O |
| پین 59 | RG7 — General purpose I/O |
| پین 60 | RG8 — General purpose I/O |
| پین 61 | RG9 — General purpose I/O |
| پین 62 | VSS — Ground |
| پین 63 | OSC1 — Crystal oscillator input |
| پین 64 | OSC2 — Crystal oscillator output |
کاربردهای معمول
PIC32MX564F064H-V/MR مناسب است برای 6 کاربردs: USB Human Interface Device (HID) Peripherals, Industrial CAN Node Controllers, USB Barcode Scanners and POS Terminals, USB Audio Class Devices, Embedded Sensor Hubs and IoT Edge Nodes, USB-to-UART / USB-to-SPI Bridge Modules.
USB Human Interface Device (HID) Peripherals
The PIC32MX564F064H-V/MR's integrated USB OTG transceiver and DMA controller make it ideal for USB HID peripherals such as keyboards, mice, game controllers, and custom input devices. The 80 MHz MIPS32 M4K core provides sufficient headroom to run the USB stack, descriptor parsing, and HID report generation without external logic. With 64 KB Flash the device accommodates Microchip's MPLAB Harmony USB stack plus HID report handlers, while 32 KB SRAM covers ring buffers and endpoint RAM. Placing a 100 nF decoupling capacitor at each VDD/VSS pair and a 1 uF bulk capacitor near the USB VBUS pin ensures stable USB Full-Speed signalling per USB 2.0 spec.
پیشنهادی
Industrial CAN Node Controllers
Industrial automation nodes using CAN bus benefit from the PIC32MX564F064H-V/MR's integrated CAN module and extended -40C to +105C operating range. The 80 MHz core delivers deterministic interrupt response for CAN message handling, while the multi-channel DMA offloads CAN RX/TX buffer transfers from the CPU. The 10-bit ADC with up to 16 channels can sample analog sensors in parallel with CAN traffic, reducing external ADC cost. The 64-VQFN package with thermal pad enables compact IP67-rated field-mount designs when soldered to a continuous ground plane.
پیشنهادی
USB Barcode Scanners and POS Terminals
Point-of-sale terminals, barcode scanners, and receipt printers require reliable USB connectivity plus enough processing power for decoding and I/O management. The PIC32MX564F064H-V/MR runs at 80 MHz which is more than adequate for 1D/2D barcode decoding algorithms and USB CDC/ECP emulation. The 64 KB Flash stores the USB stack and application firmware, while the DMA channels allow background data transfer from a serial barcode sensor to USB endpoint memory. The 10-bit ADC can monitor battery voltage or thermal printer head temperature, reducing the need for an external supervisor.
پیشنهادی
USB Audio Class Devices
USB speakers, USB headsets, and USB audio streaming dongles leverage the PIC32MX564F064H-V/MR's full-speed USB plus 10-bit ADC or PWM for basic audio rendering. The DMA controller moves USB isochronous endpoint data directly to PWM or I2S peripherals, keeping the CPU free for envelope and volume control tasks. At 80 MHz the core has enough headroom for a 48 kHz stereo USB Audio Class 1.0 stack with minimal jitter. The 64-VQFN package fits inside compact audio dongle enclosures with single-layer ground pours for EMI mitigation.
پیشنهادی
Embedded Sensor Hubs and IoT Edge Nodes
IoT edge nodes that aggregate multiple sensor interfaces (I2C, SPI, UART) and stream data over USB benefit from the PIC32MX564F064H-V/MR's mix of peripherals. The 80 MHz core executes sensor fusion and protocol conversion locally, while DMA channels offload streaming samples from the 10-bit ADC to memory. USB OTG allows the node to act as either a USB device or a limited USB host, useful for commissioning via USB mass storage. The extended -40C to +105C range supports outdoor enclosures without additional thermal management.
پیشنهادی
USB-to-UART / USB-to-SPI Bridge Modules
Field-upgradeable bridges that expose legacy UART or SPI peripherals over USB use the PIC32MX564F064H-V/MR as a cost-effective bridge controller. The integrated USB OTG full-speed PHY removes the need for an external bridge IC, and the 80 MHz core runs CDC class drivers plus protocol translation with headroom. The 64 KB Flash stores USB stack plus command parsers, while 32 KB SRAM holds buffer queues. The 64-VQFN package supports very compact bridge dongle designs and the -40C to +105C range covers industrial cabinet installations.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای PIC32MX564F064H-V/MR — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | PIC32MX564F064H-I/MR | PIC32MX564F064HT-V/MR | PIC32MX564F064HT-I/MR | PIC32MX564F128H-I/MR | PIC32MX534F064H-I/MR | PIC32MX470F512H-I/MR |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-VQFN (9x9) | 64-VQFN (9x9) - same | 64-VQFN (9x9) - same | 64-VQFN (9x9) - same | 64-VQFN (9x9) - same | 64-VQFN (9x9) - same | 64-VQFN (9x9) - same |
| Core | MIPS32 M4K, 80 MHz | MIPS32 M4K, 80 MHz | MIPS32 M4K, 80 MHz | MIPS32 M4K, 80 MHz | MIPS32 M4K, 80 MHz | MIPS32 M4K, 80 MHz | MIPS32 M4K, 80 MHz |
| Flash | 64 KB | 64 KB | 64 KB | 64 KB | 128 KB | 64 KB | 512 KB |
| SRAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 128 KB |
| USB OTG | Yes (Full/Low Speed) | Yes | Yes | Yes | Yes | No | Yes |
| Operating Temperature | -40C to +105C | -40C to +85C | -40C to +105C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
تفاوت‌های کلیدی
- Integrated USB OTG full/low-speed transceiver (در مقابلPIC32MX534F064H-I/MR)
- Extended -40C to +105C operating range (در مقابلPIC32MX564F064H-I/MR)
- Tape-and-reel packaging variant available (در مقابلPIC32MX564F064H-V/MR (tray))
یادداشت‌های طراحی
Place one 100 nF ceramic decoupling capacitor adjacent to every VDD/VSS pair on the PIC32MX564F064H-V/MR. Add a single 1 uF to 4.7 uF bulk capacitor at the package entry. The core voltage range is 2.3 V to 3.6 V. For USB bus-powered designs add a 4.7 uF tantalum on VBUS to meet USB inrush transients. Estimated: at 80 MHz full activity the core draws ~70 mA; verify against actual peripheral activity budget before finalising the regulator.
The 64-VQFN package has an exposed thermal pad (EP) on the underside that must be soldered to a continuous ground plane on the top PCB layer. Provide at least 8 thermal vias in the EP pad (0.3 mm drill, 0.5 mm pitch) to inner ground layers. Without EP soldering, junction-to-ambient thermal resistance (theta_JA) rises sharply and the part may throttle under sustained 80 MHz + USB traffic. Estimated: a properly soldered EP drops theta_JA from ~40 C/W toward ~25 C/W in a 4-layer board.
Do not leave the USB D+/D- pins floating when the USB module is unused; tie them to ground through 10 kohm pull-downs to avoid false enumeration. The VBUS pin must see 5 V through a 10 uF bulk when the device acts as a USB device. Configuration bits (DEVCFG0/1/2/3) must be programmed early in the firmware - leaving them at default can disable JTAG and lock the device. Verify all unused I/O are configured as outputs (not inputs) to minimise current leakage in sleep modes.
اطلاعات انطباق
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - this is an industrial/consumer-grade MCU. Halogen-free status not explicitly stated in the verified data.
