PIC32MZ1024EFG144-E/PL - 200MHz 1MB Flash MCU | Microchip
MPN: PIC32MZ1024EFG144-E/PL ✓ فعالPIC32MZ1024EFG144-E/PL نمای کلی
A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single die. Within the broader hierarchy, this PIC32MZ EF part belongs to the 32-bit MCU family (32-bit -> MCU -> microcontroller -> embedded processor -> semiconductor), superseding older 8/16-bit MCUs in applications that demand DSP extensions, single-cycle MAC, IEEE 754 floating point, and deterministic interrupt latency.
Key features include an IEEE 754 FPU, four 64-bit accumulators, single-cycle MAC with saturating and fractional math, 12-bit 48-channel ADC, 12 DMA channels, Hi-Speed USB, Ethernet MAC, and hardware crypto/hash accelerator variants within the EF family. Dual-panel Flash enables live field updates without downtime. The 144-pin LQFP provides 120+ GPIO with multiple 5V-tolerant pins for mixed-voltage interfacing.
Architecturally, the EF family uses the MIPS microAptiv core with DSP extensions and a tightly coupled FPU, achieving 330 DMIPS at 200 MHz. The dual-panel Flash is partitioned for seamless Live Update operation, while dedicated boot Flash (160 KB) supports secure firmware bootloaders. Peripherals are interconnected through a high-bandwidth bus matrix that lets the DMA engine move data between ADC, USB, Ethernet and SRAM without CPU intervention.
Typical applications include industrial PLC controllers, automotive instrument clusters and HMI panels, IoT gateways with Ethernet, motor-control FOC drives, and graphics-enabled HMI terminals. Designers benefit from the Live Update capability for remote firmware deployment in deployed assets.
When designing with this device, allocate sufficient decoupling (100 nF + 10 uF near each VDD pin pair), follow the 144-LQFP layout guideline with a continuous ground plane under the exposed pad route, and reserve the 5V-tolerant pins for legacy logic interfacing. Program flash endurance (1k minimum erase/write cycles per sector) should be considered for high-write applications.
This page synthesizes distributor pricing, drop-in same-package alternatives, comparison tables, and practical design notes drawn from the PIC32MZ EF Family datasheet and reference designs, providing context that is not duplicated on any single source page.
جایگزین‌های drop-in برای PIC32MZ1024EFG144-E/PL — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای PIC32MZ1024EFG144-E/PL (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Core Architecture, Ethernet, Operating Temperature, ADC.
PIC32MZ1024EFE144-E/PL
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MZ1024EFG144-I/PL
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PIC32MZ1024EFF144-E/PL
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MZ1024ECH144T-I/PL
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MZ1024ECM144-I/PH
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MZ1024EFE144-I/PL
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MZ1024EFG144-E/PL حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core Architecture | MIPS32 M-Class microAptiv with FPU |
| Core Frequency | 200 MHz (180 MHz per device marking) |
| DMIPS Performance | 330 DMIPS |
| Program Flash | 1 MB (1024 KB, 1M x 8) |
| SRAM | 512 KB |
| Boot Flash (dedicated) | 160 KB |
| Flash Type | Dual Panel (Live Update supported) |
| Operating Voltage | 2.1 V to 3.6 V (3.3 V typical) |
| ADC | 12-bit, up to 48 channels |
| DMA Channels | 12 |
| USB | Hi-Speed USB 2.0 Host/Device/OTG |
| Ethernet | 10/100 Mbps MAC (MII/RMII) |
| Crypto Acceleration | None (EFG variant, no Crypto) |
| CAN | None (EFG variant, no CAN) |
| GPIO (approx) | 120+ (5V-tolerant subset) |
| بسته‌بندی | 144-pin LQFP (PL), 20x20 mm |
| دمای کاری | -40C to +125C (E grade, AEC-Q100) |
| نوع نصب | Surface Mount |
| سطح MSL | 3 (per JEDEC J-STD-020) |
| وضعیت RoHS | Compliant |
پیکربندی پین PIC32MZ1024EFG144-E/PL
| پین 1 | OSC1/RC12 — Primary oscillator input or GPIO RC12 |
| پین 2 | OSC2/RC15 — Primary oscillator output or GPIO RC15 |
| پین 3 | VDD — Core supply 3.3V |
| پین 4 | VSS — Ground reference |
| پین 5 | RC13 — GPIO RC13 |
| پین 6 | RC14 — GPIO RC14 |
| پین 7 | RPB0/AN0 — GPIO RB0 / analog input AN0 |
| پین 8 | RPB1/AN1 — GPIO RB1 / analog input AN1 |
| پین 9 | RPB2/AN2 — GPIO RB2 / analog input AN2 |
| پین 10 | RPB3/AN3 — GPIO RB3 / analog input AN3 |
| پین 11 | VDD — Core supply 3.3V |
| پین 12 | VSS — Ground reference |
| پین 13 | RPB4/AN4 — GPIO RB4 / analog input AN4 |
| پین 14 | RPB5/AN5 — GPIO RB5 / analog input AN5 |
| پین 15 | RPB6/AN6 — GPIO RB6 / analog input AN6 |
| پین 16 | RPB7/AN7 — GPIO RB7 / analog input AN7 |
| پین 17 | RPB8/AN8 — GPIO RB8 / analog input AN8 |
| پین 18 | RPB9/AN9 — GPIO RB9 / analog input AN9 |
| پین 19 | RPB10/AN10 — GPIO RB10 / analog input AN10 |
| پین 20 | RPB11/AN11 — GPIO RB11 / analog input AN11 |
| پین 21 | VDD — Core supply 3.3V |
| پین 22 | VSS — Ground reference |
| پین 23 | RPB12/AN12 — GPIO RB12 / analog input AN12 |
| پین 24 | RPB13/AN13 — GPIO RB13 / analog input AN13 |
| پین 25 | RPB14/AN14 — GPIO RB14 / analog input AN14 |
| پین 26 | RPB15/AN15 — GPIO RB15 / analog input AN15 |
| پین 27 | VDD — Core supply 3.3V |
| پین 28 | VSS — Ground reference |
| پین 29 | AN16/RPC0 — Analog input AN16 / GPIO RC0 |
| پین 30 | AN17/RPC1 — Analog input AN17 / GPIO RC1 |
| پین 31 | AN18/RPC2 — Analog input AN18 / GPIO RC2 |
| پین 32 | AN19/RPC3 — Analog input AN19 / GPIO RC3 |
| پین 33 | RPC4 — GPIO RC4 |
| پین 34 | RPC5 — GPIO RC5 |
| پین 35 | RPC6 — GPIO RC6 |
| پین 36 | RPC7 — GPIO RC7 |
| پین 37 | RPC8 — GPIO RC8 |
| پین 38 | RPC9 — GPIO RC9 |
| پین 39 | VDD — Core supply 3.3V |
| پین 40 | VSS — Ground reference |
| پین 41 | RPC10 — GPIO RC10 |
| پین 42 | RPC11 — GPIO RC11 |
| پین 43 | RPC12 — GPIO RC12 (shared with OSC1) |
| پین 44 | RPC13 — GPIO RC13 |
| پین 45 | RPC14 — GPIO RC14 |
| پین 46 | RPC15 — GPIO RC15 (shared with OSC2) |
| پین 47 | VDD — Core supply 3.3V |
| پین 48 | VSS — Ground reference |
| پین 49 | RPD0 — GPIO RD0 |
| پین 50 | RPD1 — GPIO RD1 |
| پین 51 | RPD2 — GPIO RD2 |
| پین 52 | RPD3 — GPIO RD3 |
| پین 53 | RPD4 — GPIO RD4 |
| پین 54 | RPD5 — GPIO RD5 |
| پین 55 | RPD6 — GPIO RD6 |
| پین 56 | RPD7 — GPIO RD7 |
| پین 57 | VDD — Core supply 3.3V |
| پین 58 | VSS — Ground reference |
| پین 59 | RPD8 — GPIO RD8 |
| پین 60 | RPD9 — GPIO RD9 |
| پین 61 | RPD10 — GPIO RD10 |
| پین 62 | RPD11 — GPIO RD11 |
| پین 63 | RPD12 — GPIO RD12 |
| پین 64 | RPD13 — GPIO RD13 |
| پین 65 | RPD14 — GPIO RD14 |
| پین 66 | RPD15 — GPIO RD15 |
| پین 67 | VDD — Core supply 3.3V |
| پین 68 | VSS — Ground reference |
| پین 69 | RPE0 — GPIO RE0 |
| پین 70 | RPE1 — GPIO RE1 |
| پین 71 | RPE2 — GPIO RE2 |
| پین 72 | RPE3 — GPIO RE3 |
| پین 73 | RPE4 — GPIO RE4 |
| پین 74 | RPE5 — GPIO RE5 |
| پین 75 | RPE6 — GPIO RE6 |
| پین 76 | RPE7 — GPIO RE7 |
| پین 77 | VDD — Core supply 3.3V |
| پین 78 | VSS — Ground reference |
| پین 79 | RPE8 — GPIO RE8 |
| پین 80 | RPE9 — GPIO RE9 |
| پین 81 | RPF0 — GPIO RF0 |
| پین 82 | RPF1 — GPIO RF1 |
| پین 83 | RPF2 — GPIO RF2 |
| پین 84 | RPF3 — GPIO RF3 |
| پین 85 | RPF4/USBID — GPIO RF4 / USB ID (OTG) |
| پین 86 | RPF5/USBVBUS — GPIO RF5 / USB VBUS sense |
| پین 87 | VDD — Core supply 3.3V |
| پین 88 | VSS — Ground reference |
| پین 89 | RPF6 — GPIO RF6 |
| پین 90 | RPF7 — GPIO RF7 |
| پین 91 | RPF8 — GPIO RF8 |
| پین 92 | RPF9 — GPIO RF9 |
| پین 93 | RPF10 — GPIO RF10 |
| پین 94 | RPF11 — GPIO RF11 |
| پین 95 | RPF12 — GPIO RF12 |
| پین 96 | RPF13 — GPIO RF13 |
| پین 97 | VDD — Core supply 3.3V |
| پین 98 | VSS — Ground reference |
| پین 99 | RPF14 — GPIO RF14 |
| پین 100 | RPF15 — GPIO RF15 |
| پین 101 | RPF16 — GPIO RF16 |
| پین 102 | RPF17 — GPIO RF17 |
| پین 103 | RPF18 — GPIO RF18 |
| پین 104 | RPF19 — GPIO RF19 |
| پین 105 | RPF20 — GPIO RF20 |
| پین 106 | RPF21 — GPIO RF21 |
| پین 107 | VDD — Core supply 3.3V |
| پین 108 | VSS — Ground reference |
| پین 109 | RPF22 — GPIO RF22 |
| پین 110 | RPF23 — GPIO RF23 |
| پین 111 | RPG0 — GPIO RG0 |
| پین 112 | RPG1 — GPIO RG1 |
| پین 113 | RPG2 — GPIO RG2 |
| پین 114 | RPG3 — GPIO RG3 |
| پین 115 | RPG4 — GPIO RG4 |
| پین 116 | RPG5 — GPIO RG5 |
| پین 117 | RPG6 — GPIO RG6 |
| پین 118 | RPG7 — GPIO RG7 |
| پین 119 | VDD — Core supply 3.3V |
| پین 120 | VSS — Ground reference |
| پین 121 | RPG8 — GPIO RG8 |
| پین 122 | RPG9 — GPIO RG9 |
| پین 123 | AVDD — Analog supply 3.3V for ADC |
| پین 124 | AVSS — Analog ground |
| پین 125 | AN20/RG12 — Analog input AN20 / GPIO RG12 |
| پین 126 | AN21/RG13 — Analog input AN21 / GPIO RG13 |
| پین 127 | AN22/RG14 — Analog input AN22 / GPIO RG14 |
| پین 128 | AN23/RG15 — Analog input AN23 / GPIO RG15 |
| پین 129 | AN24/RH0 — Analog input AN24 / GPIO RH0 |
| پین 130 | AN25/RH1 — Analog input AN25 / GPIO RH1 |
| پین 131 | AN26/RH2 — Analog input AN26 / GPIO RH2 |
| پین 132 | AN27/RH3 — Analog input AN27 / GPIO RH3 |
| پین 133 | AN28/RH4 — Analog input AN28 / GPIO RH4 |
| پین 134 | AN29/RH5 — Analog input AN29 / GPIO RH5 |
| پین 135 | AVDD — Analog supply 3.3V for ADC |
| پین 136 | AVSS — Analog ground |
| پین 137 | AN30/RH6 — Analog input AN30 / GPIO RH6 |
| پین 138 | AN31/RH7 — Analog input AN31 / GPIO RH7 |
| پین 139 | AN32/RH8 — Analog input AN32 / GPIO RH8 |
| پین 140 | AN33/RH9 — Analog input AN33 / GPIO RH9 |
| پین 141 | AN34/RH10 — Analog input AN34 / GPIO RH10 |
| پین 142 | AN35/RH11 — Analog input AN35 / GPIO RH11 |
| پین 143 | MCLR — Master clear reset (active low) |
| پین 144 | VDD — Core supply 3.3V |
کاربردهای معمول
PIC32MZ1024EFG144-E/PL مناسب است برای 6 کاربردs: Industrial PLC Controllers, Automotive Instrument Clusters and HMI, IoT Gateways with Ethernet and USB, Motor Control (FOC and PFC Drives), Graphics HMI / TFT Touch Panels, Medical Patient Monitoring.
Industrial PLC Controllers
The PIC32MZ1024EFG144-E/PL's 330 DMIPS at 200 MHz, 512 KB SRAM, and 48-channel 12-bit ADC make it a strong fit for mid-range industrial PLCs. Its MIPS FPU executes floating-point ladder logic and PID loops in single-cycle precision, while the dual-panel Flash enables remote firmware updates without stopping the line. The -E temperature grade ensures operation in factory floor cabinets up to +125C. Designers typically pair it with the MCP2562 CAN transceiver and the MCP2517FD for industrial networking.
پیشنهادی
Automotive Instrument Clusters and HMI
The PIC32MZ1024EFG144-E/PL's AEC-Q100 -E grade qualification and 144-LQFP footprint make it well-suited to automotive instrument clusters and HMI panels. Its 1 MB Flash stores graphics framebuffers and lookup tables, while the 512 KB SRAM buffers TFT displays without external SDRAM at low resolutions. Hi-Speed USB supports diagnostic dongles, and the 12-bit ADC reads automotive sensor inputs directly. Live Update Flash partitioning is particularly useful for OTA cluster firmware updates in dealer service.
پیشنهادی
IoT Gateways with Ethernet and USB
For IoT edge gateways, the PIC32MZ1024EFG144-E/PL combines a 10/100 Ethernet MAC and Hi-Speed USB 2.0 host/device, enabling concurrent wired networking and local peripheral attachment. The 1 MB Flash holds TLS certificate stores and protocol stacks (MQTT, CoAP), while 512 KB SRAM allows simultaneous TCP/IP and USB stack operation. The 12 DMA channels offload packet processing from the CPU, and the FPU accelerates signal preprocessing for sensor data before cloud upload.
پیشنهادی
Motor Control (FOC and PFC Drives)
Field-oriented control (FOC) and PFC motor drives benefit from the PIC32MZ1024EFG144-E/PL's MIPS microAptiv core with single-cycle MAC and saturating math. The 200 MHz FPU computes Park/Clarke transforms and PI loops within microsecond budgets, while the 48-channel 12-bit ADC samples phase currents at the PWM frequency. The dual-panel Flash allows parameter-set swaps between motor profiles without halting the drive, critical for multi-motor industrial equipment.
پیشنهادی
Graphics HMI / TFT Touch Panels
Mid-resolution TFT HMI panels (up to 480x272) run comfortably on the PIC32MZ1024EFG144-E/PL without external SDRAM. The 1 MB Flash stores fonts, icons, and screen templates; the 512 KB SRAM buffers the active framebuffer at 16-bit color. The peripheral 5V-tolerant GPIOs simplify direct connection to legacy 5V TFT controller signals. The 200 MHz MIPS core delivers smooth animation and screen transitions, while Live Update Flash supports in-field screen redesigns.
پیشنهادی
Medical Patient Monitoring
Battery-powered patient monitors benefit from the PIC32MZ1024EFG144-E/PL's MIPS FPU for FFT-based ECG/EEG signal analysis, 12-bit 48-channel ADC for multi-lead acquisition, and 1 MB Flash for embedded firmware plus reference DSP libraries. The 144-LQFP footprint accommodates multi-channel analog front ends. Note that medical applications typically require additional IEC 60601 compliance beyond the silicon level - the part's role is signal processing rather than safety isolation.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای PIC32MZ1024EFG144-E/PL — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | PIC32MZ1024EFE144-E/PL | PIC32MZ1024EFG144-I/PL | PIC32MZ1024EFF144-E/PL | PIC32MZ1024ECH144T-I/PL | PIC32MZ1024ECM144-I/PH |
|---|---|---|---|---|---|---|
| Package | 144-LQFP (PL) 20x20 mm | 144-LQFP (PL) - same | 144-LQFP (PL) - same | 144-LQFP (PL) - same | 144-LQFP (PL) - same | 144-LQFP (PH) - same 144-LQFP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Program Flash | 1 MB | 1 MB | 1 MB | 1 MB | 2 MB | 2 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Hardware Crypto | No | Yes | No | No | No | Yes |
| CAN | No | No | No | Yes (CAN FD) | Yes | Yes |
| Operating Temperature | -40C to +125C (E grade, AEC-Q100) | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +85C (I grade) |
| Ethernet + USB | Yes (Ethernet + Hi-Speed USB) | Yes | Yes | Yes | Yes | Yes |
| Unit Price (qty 1) | $14.95 | $15.50 | $13.50 | $15.20 | $18.95 | $19.45 |
تفاوت‌های کلیدی
- Drop-in upgrade path within same 144-LQFP footprint (در مقابلPIC32MZ1024EFE144-E/PL)
- Lower cost without crypto engine overhead (در مقابلPIC32MZ1024EFE144-E/PL)
- AEC-Q100 -E grade for automotive deployments (در مقابلPIC32MZ1024EFG144-I/PL)
یادداشت‌های طراحی
Each VDD pin on the PIC32MZ1024EFG144-E/PL should be decoupled locally with a 100 nF ceramic cap (X7R, 0402 or 0603) plus a shared 10 uF bulk cap. The ADC section requires a separate AVDD trace with its own ferrite bead and 100 nF + 10 uF network; do not share AVDD and VDD pours directly to avoid digital switching noise coupling into analog conversions.
Route the 144-LQFP package with a continuous uninterrupted ground plane on the layer immediately beneath the device; the LQFP does not have an exposed pad but a tight stitch pattern of vias around the perimeter improves thermal dissipation and reduces EMI. Place the primary 8 MHz or 12 MHz crystal within 5 mm of OSC1/OSC2 with a guard ring on the ground plane, and keep high-speed USB/Ethernet traces length-matched and impedance-controlled per USB 2.0 and 10/100 Ethernet specs.
Do not exceed the absolute maximum VDD of 3.6V - transient spikes above 4V can damage the silicon. The 5V-tolerant pins are limited in current sink/source; refer to the DC characteristics table in the datasheet. The dual-panel Live Update feature requires careful linker script partitioning; if not configured correctly the boot Flash will lock out firmware updates.
At 200 MHz with both FPU and DSP engaged, the PIC32MZ1024EFG144-E/PL dissipates approximately 0.5-0.7W depending on peripheral utilization. For continuous -40C to +125C operation, the 144-LQFP thermal resistance (theta_JA approximately 35 C/W on a 2-layer JEDEC test board) limits ambient operation. A 4-layer board with dedicated thermal vias can drop theta_JA to roughly 18 C/W, enabling full-speed operation across the -40C to +125C range.
اطلاعات انطباق
RoHS compliant per Microchip product page. AEC-Q100 qualified (E temperature grade). Halogen-free per Microchip environmental compliance documentation. Conflict minerals compliant per Microchip supply chain disclosures.
