PIC32MZ2048EFG144-I/PL - 32-Bit MCU 2MB Flash 200MHz LQFP-144
MPN: PIC32MZ2048EFG144-I/PL ✓ فعالPIC32MZ2048EFG144-I/PL نمای کلی
An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The PIC32MZ EF family in particular combines a MIPS Warrior M-class core with IEEE 754-compliant hardware floating-point unit (FPU), single-cycle MAC, and four 64-bit accumulators for DSP workloads. Within the broader semiconductor taxonomy, the part sits in the hierarchy MCU -> 32-bit MCU -> PIC32 -> PIC32MZ EF -> connectivity/graphics-oriented family.
Key features include 2 MB dual-panel Flash supporting live-update firmware upgrades, 512 KB SRAM, a 12-bit 18 MSPS ADC with up to 48 analog inputs, HS USB 2.0 OTG, 10/100 Ethernet MAC, CAN 2.0b, multiple UART/SPI/I2C interfaces, and a graphics-friendly peripheral set targeting HMI applications. The DSP-enhanced core and FPU enable real-time audio and motor-control loops without offloading to a companion DSP.
Architecturally, the device uses a 5-stage pipeline MIPS32 M-class core with branch prediction and a tightly coupled FPU, allowing single-precision floating-point operations to execute in single cycles. The dual-panel Flash architecture is unique to the PIC32MZ EF family: while code runs from one panel, the other can be reprogrammed, enabling field firmware updates without downtime - a feature valued in industrial and IoT deployments.
Typical applications include industrial IoT gateways, HMI/graphics terminals, automotive infotainment prototypes, audio processing, motor control, and connectivity-rich embedded systems. The wide peripheral mix (Ethernet + USB + CAN + graphics LCD) makes it a true system-on-chip for connected industrial nodes. When designing with this part, plan the PCB layout for the 0.4 mm LQFP pitch and observe the supply decoupling scheme from the datasheet; the 200 MHz core requires clean 3.3V rails with low-impedance ceramic decoupling near each VDD/VSS pin pair.
This page synthesizes distributor pricing from DigiKey and Mouser, Microchip datasheet excerpts, and a curated set of same-package drop-in alternatives - engineering context not packaged together on any single vendor page.
جایگزین‌های drop-in برای PIC32MZ2048EFG144-I/PL — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای PIC32MZ2048EFG144-I/PL (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Core Architecture, USB, ADC, Package, Operating Temperature.
PIC32MZ1024EFG144T-I/PH
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MZ1024EFG144-E/PL
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MZ1024EFE144-I/PL
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MZ2048EFG144-E/PH
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MZ2048EFG144T-I/PL
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PIC32MZ2048ECM144-I/PL
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MZ2048EFG144-I/PL حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core Architecture | MIPS32 M-Class (Warrior) |
| Core Frequency (max) | 200 MHz |
| DMIPS | 330 DMIPS |
| FPU | IEEE 754 single-precision hardware FPU |
| DSP Extensions | 4 x 64-bit accumulators, single-cycle MAC, saturating and fractional math |
| Program Flash | 2 MB (dual-panel, live-update) |
| SRAM | 512 KB |
| ولتاژ تغذیه | 2.5V / 3.3V |
| بسته‌بندی | 144-LQFP (20x20 mm) |
| Pin Pitch | 0.4 mm |
| ADC | 12-bit, up to 18 MSPS |
| دمای کاری | -40C to +85C (Industrial -I grade) |
| USB | High-Speed USB 2.0 OTG |
| Ethernet | 10/100 Mbps MAC |
| CAN | CAN 2.0b |
| Crypto Accelerator | None (No Crypto variant) |
پیکربندی پین PIC32MZ2048EFG144-I/PL
| پین 1 | RD0 — GPIO/IO port D bit 0 |
| پین 2 | RD1 — GPIO/IO port D bit 1 |
| پین 3 | RD2 — GPIO/IO port D bit 2 |
| پین 4 | RD3 — GPIO/IO port D bit 3 |
| پین 5 | RD4 — GPIO/IO port D bit 4 |
| پین 6 | RD5 — GPIO/IO port D bit 5 |
| پین 7 | RD6 — GPIO/IO port D bit 6 |
| پین 8 | RD7 — GPIO/IO port D bit 7 |
| پین 9 | RC12 — GPIO/IO port C bit 12 |
| پین 10 | RC13 — GPIO/IO port C bit 13 |
| پین 11 | RC14 — GPIO/IO port C bit 14 |
| پین 12 | RC15 — GPIO/IO port C bit 15 |
| پین 13 | VSS — Ground |
| پین 14 | VDD — Positive supply (3.3V) |
| پین 15 | RA0 — GPIO/IO port A bit 0 |
| پین 16 | RA1 — GPIO/IO port A bit 1 |
| پین 17 | RA2 — GPIO/IO port A bit 2 |
| پین 18 | RA3 — GPIO/IO port A bit 3 |
| پین 19 | RA4 — GPIO/IO port A bit 4 |
| پین 20 | RA5 — GPIO/IO port A bit 5 |
| پین 21 | RA6 — GPIO/IO port A bit 6 |
| پین 22 | RA7 — GPIO/IO port A bit 7 |
| پین 23 | RA9 — GPIO/IO port A bit 9 |
| پین 24 | RA10 — GPIO/IO port A bit 10 |
| پین 25 | RA11 — GPIO/IO port A bit 11 |
| پین 26 | RA12 — GPIO/IO port A bit 12 |
| پین 27 | RA13 — GPIO/IO port A bit 13 |
| پین 28 | RA14 — GPIO/IO port A bit 14 |
| پین 29 | RA15 — GPIO/IO port A bit 15 |
| پین 30 | VSS — Ground |
| پین 31 | VDD — Positive supply (3.3V) |
| پین 32 | RB0 — GPIO/IO port B bit 0 |
| پین 33 | RB1 — GPIO/IO port B bit 1 |
| پین 34 | RB2 — GPIO/IO port B bit 2 |
| پین 35 | RB3 — GPIO/IO port B bit 3 |
| پین 36 | RB4 — GPIO/IO port B bit 4 |
| پین 37 | RB5 — GPIO/IO port B bit 5 |
| پین 38 | RB6 — GPIO/IO port B bit 6 |
| پین 39 | RB7 — GPIO/IO port B bit 7 |
| پین 40 | RB8 — GPIO/IO port B bit 8 |
| پین 41 | RB9 — GPIO/IO port B bit 9 |
| پین 42 | RB10 — GPIO/IO port B bit 10 |
| پین 43 | RB11 — GPIO/IO port B bit 11 |
| پین 44 | RB12 — GPIO/IO port B bit 12 |
| پین 45 | RB13 — GPIO/IO port B bit 13 |
| پین 46 | RB14 — GPIO/IO port B bit 14 |
| پین 47 | RB15 — GPIO/IO port B bit 15 |
| پین 48 | VSS — Ground |
| پین 49 | VDD — Positive supply (3.3V) |
| پین 50 | RC0 — GPIO/IO port C bit 0 |
| پین 51 | RC1 — GPIO/IO port C bit 1 |
| پین 52 | RC2 — GPIO/IO port C bit 2 |
| پین 53 | RC3 — GPIO/IO port C bit 3 |
| پین 54 | RC4 — GPIO/IO port C bit 4 |
| پین 55 | RC5 — GPIO/IO port C bit 5 |
| پین 56 | RC6 — GPIO/IO port C bit 6 |
| پین 57 | RC7 — GPIO/IO port C bit 7 |
| پین 58 | RC8 — GPIO/IO port C bit 8 |
| پین 59 | RC9 — GPIO/IO port C bit 9 |
| پین 60 | RC10 — GPIO/IO port C bit 10 |
| پین 61 | RC11 — GPIO/IO port C bit 11 |
| پین 62 | VSS — Ground |
| پین 63 | VDD — Positive supply (3.3V) |
| پین 64 | RF0 — GPIO/IO port F bit 0 |
| پین 65 | RF1 — GPIO/IO port F bit 1 |
| پین 66 | RF2 — GPIO/IO port F bit 2 |
| پین 67 | RF3 — GPIO/IO port F bit 3 |
| پین 68 | RF4 — GPIO/IO port F bit 4 |
| پین 69 | RF5 — GPIO/IO port F bit 5 |
| پین 70 | RF6 — GPIO/IO port F bit 6 |
| پین 71 | RF7 — GPIO/IO port F bit 7 |
| پین 72 | RF8 — GPIO/IO port F bit 8 |
| پین 73 | RG0 — GPIO/IO port G bit 0 |
| پین 74 | RG1 — GPIO/IO port G bit 1 |
| پین 75 | RG2 — GPIO/IO port G bit 2 |
| پین 76 | RG3 — GPIO/IO port G bit 3 |
| پین 77 | RG6 — GPIO/IO port G bit 6 |
| پین 78 | RG7 — GPIO/IO port G bit 7 |
| پین 79 | RG8 — GPIO/IO port G bit 8 |
| پین 80 | RG9 — GPIO/IO port G bit 9 |
| پین 81 | VSS — Ground |
| پین 82 | VDD — Positive supply (3.3V) |
| پین 83 | RE0 — GPIO/IO port E bit 0 |
| پین 84 | RE1 — GPIO/IO port E bit 1 |
| پین 85 | RE2 — GPIO/IO port E bit 2 |
| پین 86 | RE3 — GPIO/IO port E bit 3 |
| پین 87 | RE4 — GPIO/IO port E bit 4 |
| پین 88 | RE5 — GPIO/IO port E bit 5 |
| پین 89 | RE6 — GPIO/IO port E bit 6 |
| پین 90 | RE7 — GPIO/IO port E bit 7 |
| پین 91 | RH0 — GPIO/IO port H bit 0 |
| پین 92 | RH1 — GPIO/IO port H bit 1 |
| پین 93 | RH2 — GPIO/IO port H bit 2 |
| پین 94 | RH3 — GPIO/IO port H bit 3 |
| پین 95 | RH4 — GPIO/IO port H bit 4 |
| پین 96 | RH5 — GPIO/IO port H bit 5 |
| پین 97 | RH6 — GPIO/IO port H bit 6 |
| پین 98 | RH7 — GPIO/IO port H bit 7 |
| پین 99 | RH8 — GPIO/IO port H bit 8 |
| پین 100 | RH9 — GPIO/IO port H bit 9 |
| پین 101 | RH10 — GPIO/IO port H bit 10 |
| پین 102 | RH11 — GPIO/IO port H bit 11 |
| پین 103 | RH12 — GPIO/IO port H bit 12 |
| پین 104 | RH13 — GPIO/IO port H bit 13 |
| پین 105 | RH14 — GPIO/IO port H bit 14 |
| پین 106 | RH15 — GPIO/IO port H bit 15 |
| پین 107 | RJ0 — GPIO/IO port J bit 0 |
| پین 108 | RJ1 — GPIO/IO port J bit 1 |
| پین 109 | RJ2 — GPIO/IO port J bit 2 |
| پین 110 | RJ3 — GPIO/IO port J bit 3 |
| پین 111 | VSS — Ground |
| پین 112 | VDD — Positive supply (3.3V) |
| پین 113 | RK0 — GPIO/IO port K bit 0 |
| پین 114 | RK1 — GPIO/IO port K bit 1 |
| پین 115 | RK2 — GPIO/IO port K bit 2 |
| پین 116 | RK3 — GPIO/IO port K bit 3 |
| پین 117 | RK4 — GPIO/IO port K bit 4 |
| پین 118 | RK5 — GPIO/IO port K bit 5 |
| پین 119 | RK6 — GPIO/IO port K bit 6 |
| پین 120 | RK7 — GPIO/IO port K bit 7 |
| پین 121 | RK8 — GPIO/IO port K bit 8 |
| پین 122 | RK9 — GPIO/IO port K bit 9 |
| پین 123 | VSS — Ground |
| پین 124 | VDD — Positive supply (3.3V) |
| پین 125 | RB9 — GPIO/IO port B bit 9 (alternate function) |
| پین 126 | RB10 — GPIO/IO port B bit 10 (alternate function) |
| پین 127 | RB11 — GPIO/IO port B bit 11 (alternate function) |
| پین 128 | RB12 — GPIO/IO port B bit 12 (alternate function) |
| پین 129 | RB13 — GPIO/IO port B bit 13 (alternate function) |
| پین 130 | RB14 — GPIO/IO port B bit 14 (alternate function) |
| پین 131 | RB15 — GPIO/IO port B bit 15 (alternate function) |
| پین 132 | RC0 — GPIO/IO port C bit 0 (alternate function) |
| پین 133 | RC1 — GPIO/IO port C bit 1 (alternate function) |
| پین 134 | RC2 — GPIO/IO port C bit 2 (alternate function) |
| پین 135 | RC3 — GPIO/IO port C bit 3 (alternate function) |
| پین 136 | VSS — Ground |
| پین 137 | VDD — Positive supply (3.3V) |
| پین 138 | OSC1 — Crystal oscillator input |
| پین 139 | OSC2 — Crystal oscillator output |
| پین 140 | SOSCO — Secondary oscillator output (32.768 kHz) |
| پین 141 | SOSCI — Secondary oscillator input (32.768 kHz) |
| پین 142 | MCLR — Master clear reset (active-low) |
| پین 143 | AVDD — Analog positive supply |
| پین 144 | AVSS — Analog ground |
کاربردهای معمول
PIC32MZ2048EFG144-I/PL مناسب است برای 7 کاربردs: Industrial IoT Gateway, Graphics HMI Terminal, Motor Control (FOC/PMSM), Connected Audio Device, Automotive Infotainment Prototype, Medical Monitoring Device, Smart Home Hub.
Industrial IoT Gateway
The PIC32MZ2048EFG144-I/PL fits industrial IoT gateways because it integrates Ethernet MAC, HS USB OTG, and CAN 2.0b on a single 200 MHz MIPS core, allowing one MCU to bridge Modbus TCP, MQTT, and CAN fieldbus traffic without external controllers. The 2 MB dual-panel Flash supports OTA firmware updates without downtime - one panel runs while the other is reprogrammed, which is essential for always-on industrial nodes. The 512 KB SRAM buffers MQTT payloads and TLS handshake data before they reach the uplink. Engineers typically pair this MCU with an external PHY (e.g. KSZ8061) and a Wi-Fi or cellular module over UART/HS USB.
پیشنهادی
Graphics HMI Terminal
The PIC32MZ2048EFG144-I/PL drives WQVGA/QVGA TFT LCD panels for HMI terminals using its Parallel Master Port (PMP) and integrated graphics peripherals, eliminating an external LCD controller. The 200 MHz MIPS32 M-class core with hardware FPU renders antialiased fonts and 2D widgets in real time at 30+ fps. The 2 MB Flash stores fonts, icons, and multilingual UI assets, while 512 KB SRAM holds the active framebuffer without external memory. Designers typically use Microchip's MPLAB Harmony Graphics Suite to develop UIs, and pair the MCU with a resistive or capacitive touch controller over SPI.
پیشنهادی
Motor Control (FOC/PMSM)
The PIC32MZ2048EFG144-I/PL executes field-oriented control loops for three-phase PMSM and BLDC motors using its 200 MHz MIPS core, hardware FPU, and 12-bit 18 MSPS ADC. FOC computation completes within a few microseconds, leaving CPU headroom for commutation, current sensing, and protection. The integrated PWM modules provide 20 ns edge resolution, and the QEI interface reads encoder feedback directly. Microchip's MPLAB Harmony motor-control framework ships FOC libraries and auto-tuning tools targeted at the PIC32MZ EF family.
پیشنهادی
Connected Audio Device
The PIC32MZ2048EFG144-I/PL is well suited to networked audio products such as streaming amplifiers, networked speakers, and Dante bridges, because the 200 MHz MIPS core with DSP extensions decodes compressed audio (MP3, AAC, Opus) and applies EQ without an external DSP. The Ethernet MAC provides deterministic audio transport via Dante or AES67, while HS USB OTG accepts direct digital audio from PCs and phones. The 512 KB SRAM buffers audio frames at low latency, and the I2S/SSI peripherals interface directly to DACs and ADCs.
پیشنهادی
Automotive Infotainment Prototype
The PIC32MZ2048EFG144-I/PL serves as a prototype platform for automotive infotainment subsystems (HMI controllers, telematics units, body controllers) thanks to its CAN 2.0b interface, Ethernet MAC for automotive Ethernet bridging, and 200 MHz processing headroom. The PIC32MZ EF family includes AEC-Q100-qualified variants (e.g. PIC32MZ2048EFG144-E/PL extended temperature grade) for production use, while the -I/PL industrial grade supports pre-compliance lab testing. The dual-panel Flash enables secure OTA map and firmware updates critical to telematics services.
پیشنهادی
Medical Monitoring Device
The PIC32MZ2048EFG144-I/PL fits portable medical monitoring equipment such as patient monitors and connected diagnostic tools, where its 200 MHz core with FPU processes biosignal filters (ECG, SpO2, respiration) in real time. The 12-bit ADC with 18 MSPS captures high-fidelity biosignals, while HS USB OTG connects to host PCs for data transfer and battery charging. The 2 MB dual-panel Flash supports safe firmware updates with rollback capability, an IEC 62304 design consideration for medical firmware. Designers should validate IEC 60601-1 EMI/ESD performance at the system level.
پیشنهادی
Smart Home Hub
The PIC32MZ2048EFG144-I/PL acts as a smart home hub aggregating Zigbee/Wi-Fi/BLE bridges, sensor data, and local automation logic. Its Ethernet MAC connects to the home router for cloud uplink, while multiple UART/SPI/I2C interfaces host radio co-processors and sensor peripherals. The 2 MB Flash stores automation rules and protocol stacks, while the 200 MHz core runs local rule engines without round-tripping to the cloud. Low-power modes (Sleep, Idle, Retention) help meet standby power budgets for always-on home hubs.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای PIC32MZ2048EFG144-I/PL — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | PIC32MZ1024EFG144T-I/PH | PIC32MZ1024EFG144-E/PL | PIC32MZ1024EFE144-I/PL | PIC32MZ2048EFG144-E/PH | PIC32MZ2048ECM144-I/PL |
|---|---|---|---|---|---|---|
| Package | 144-LQFP (20x20 mm, PL) | 144-LQFP (PH) - same family | 144-LQFP (20x20 mm, PL) | 144-LQFP (20x20 mm, PL) | 144-LQFP (PH) - same family | 144-LQFP (20x20 mm, PL) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 2 MB (dual-panel) | 1 MB | 1 MB | 1 MB | 2 MB | 2 MB |
| SRAM | 512 KB | 256 KB | 256 KB | 256 KB | 512 KB | 512 KB |
| FPU | Yes (single-precision) | Yes (single-precision) | Yes (single-precision) | No (EC family) | Yes (single-precision) | No (EC family) |
| Crypto Accelerator | No (No Crypto) | No | No | No | No | No |
| Operating Temperature | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +85C (I grade) |
تفاوت‌های کلیدی
- Highest Flash density (2 MB) in the PIC32MZ EF PL-package family (در مقابلPIC32MZ1024EFG144T-I/PH)
- Hardware floating-point unit (FPU) (در مقابلPIC32MZ2048ECM144-I/PL)
- Live-update dual-panel Flash (در مقابلPIC32MX795F512L-80I/TL)
یادداشت‌های طراحی
The PIC32MZ2048EFG144-I/PL has multiple VDD/VSS/AVDD/AVSS pin pairs distributed across the 144-LQFP package to support the 200 MHz core. Place a 100 nF X7R ceramic decoupling capacitor within 2-3 mm of every VDD/VSS pair, plus a 4.7 uF bulk capacitor on each supply rail. The 3.3V supply should source from a low-noise LDO (e.g. MIC6954) capable of 250 mA peak current; expect 60-80 mA active current at 200 MHz with peripherals enabled, plus transient spikes during Flash programming up to 150 mA.
The 144-LQFP (20x20 mm) package uses 0.4 mm lead pitch which demands careful PCB layout: use 0.15 mm trace/space design rules with 0.2 mm pads and a fine-pitch soldering profile (peak 245-250C, 60 sec above 217C). Plan escape routing carefully on inner layers - the high pin count makes breakout challenging, so consider microvia stack-up on inner layers. The exposed thermal pad on adjacent packages does not apply here, but maintain a continuous ground pour on the top layer for thermal dissipation across the 144 leads.
Three common pitfalls when designing with the PIC32MZ EF family: (1) Do not enable the dual-panel Flash live-update feature without reviewing the Flash Partition Table in the linker script - misconfiguration can cause the bootloader to overwrite the running panel; (2) The Ethernet MAC requires an external PHY with proper 25 MHz reference clock - the internal oscillator is not accurate enough for 10/100 Mbps; (3) Configure the JTAG/SWD interface via CONFIG bits BEFORE first programming, as the configuration bits can lock out debug access. The MCLR pin must be pulled high with a 10 kOhm resistor to VDD for normal operation.
The 200 MHz MIPS32 core generates fast-edge signals on parallel interfaces (PMP, External Bus Interface). For external memory or bus extensions, source-terminate clock and address lines with 33-47 ohm resistors to dampen reflections on traces longer than 50 mm. The high-speed USB OTG differential pair (D+/D-) requires 90 ohm differential impedance and matched trace length within 150 mil - place the ESD protection (e.g. USBLC6-2SC6) within 5 mm of the connector. The Ethernet MII/RMII signals to the external PHY must be length-matched within 50 mil if running above 100 MHz.
اطلاعات انطباق
Industrial -I grade (-40C to +85C), not AEC-Q100 qualified. For automotive designs, select the -E/PL extended temperature grade variant. Lead-free LQFP package, RoHS and REACH compliant per Microchip product page.
