SC9S08QE16SCLCR 8-Bit S08 Microcontroller | NXP
MPN: SC9S08QE16SCLCR ✗ پایان تولیدSC9S08QE16SCLCR نمای کلی
An 8-bit microcontroller is a compact embedded controller that combines a processor core, memory, and peripherals on one semiconductor package. The HCS08 family belongs to the broader embedded-processing hierarchy: microcontroller unit, embedded processor, semiconductor, and electronic component. Such devices are used to read sensors, control actuators, sequence operations, and manage communication or human-interface functions in compact equipment.
The verified product listing confirms the SC9S08QE16SCLCR identity and identifies the device as an 8-bit HC08/S08 microcontroller. The LCSC result additionally reports a starting price of $2.2595, but the supplied records do not establish standardized quantity-break pricing, complete ordering information, or a manufacturer-authorized lifecycle classification for this exact orderable MPN.
Because the retrieved data does not include a technical datasheet parameter table, details such as processor speed, flash and RAM size, I/O count, supply voltage, timers, communication interfaces, and operating temperature cannot be safely inferred from the part number. Engineers should therefore treat those values as unavailable until verified from the official S08QE16 documentation and the relevant package data sheet.
Potential HC08/S08 applications include compact motor controllers, simple industrial modules, appliance controls, sensor nodes, and embedded instrumentation. Suitability depends on the verified memory map, peripheral set, pin multiplexing, clock requirements, and operating conditions rather than the distributor description alone.
Before designing a PCB, verify the exact pinout, exposed-pad requirements, recommended decoupling, programming interface, clock components, and analog or communications peripherals in the official documentation. Do not treat a generic cross-reference result as proof of firmware, peripheral, timing, or pin-level compatibility.
This page consolidates the verified distributor identity, commercial snapshot, package-related procurement links, and source traceability. Its key information gain is the separation of confirmed facts from unverified engineering parameters, helping buyers evaluate sourcing without presenting guesses as manufacturer specifications.
جایگزین‌های drop-in برای SC9S08QE16SCLCR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
هیچ جایگزین مستقیمی برای این محصول موجود نیست.
درخواست جایگزینSC9S08QE16SCLCR حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 8-bit HCS08/HC08/S08 microcontroller |
| Manufacturer | Freescale Semiconductor / NXP Semiconductors |
| Part Number | SC9S08QE16SCLCR |
| Processor Architecture | 8-bit |
| Series | HC08/S08 |
| Package Type | LQFP |
| نوع نصب | Surface mount |
| LCSC Starting Price | $2.2595 |
| وضعیت RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Status | unknown |
راهنمای پیکربندی پین SC9S08QE16SCLCR lqfp
پیکربندی پین برای SC9S08QE16SCLCR (پکیج lqfp). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.
داده پین‌آوت تفصیلی موجود نیست برای SC9S08QE16SCLCR.
به دیتاشیت برای پیکربندی کامل پین‌ها.
کاربردهای معمول
SC9S08QE16SCLCR مناسب است برای 6 کاربردs: Compact Appliance Controller, Industrial Sensor Interface, Simple Motor Sequencing, Sensor Node, Human Interface Panel, Programmable Logic Controller.
Compact Appliance Controller
The SC9S08QE16SCLCR is a candidate for compact appliance control only after its clock, memory, I/O, and timer resources are verified against the control plan. An 8-bit HC08/S08-class controller could monitor switches, operate indicators, sequence motors or relays, and enforce simple safety timing without a higher-complexity processor. The verified records establish an 8-bit HC08/S08 microcontroller, but they do not specify the exact QE16 resources. Engineers should therefore validate pin mapping, electrical limits, firmware timing, and production test coverage against the official datasheet.
پیشنهادی
Industrial Sensor Interface
The SC9S08QE16SCLCR could support a small industrial sensor interface when its verified I/O count, analog capabilities, supply range, and timing meet the design requirements. Suitable controller tasks may include conditioning a digital sensor output, tracking a slow analog threshold, applying debounce logic, recording operating state, and reporting status through a board-level serial link. Because those specifications are absent from the supplied excerpts, selection must include direct verification of electrical ratings, peripheral multiplexing, ESD requirements, and environmental qualification rather than reliance on the generic 8-bit label.
پیشنهادی
Simple Motor Sequencing
The SC9S08QE16SCLCR may fit a basic motor-sequencing module if its verified timer, pulse-width modulation, interrupt, and I/O capabilities match the motor-driver requirements. An embedded controller can translate external commands into ordered drive outputs, add minimum on-times, detect simple timeout conditions, and provide a safe default state after reset. The verified listing does not disclose those peripherals or the exact package pins. Design review must therefore confirm motor-interface isolation, inductive transient protection, watchdog behavior, and whether firmware timing remains valid before production use.
پیشنهادی
Sensor Node
The SC9S08QE16SCLCR is suitable for consideration in a small sensor node only when its verified memory and power characteristics support periodic acquisition, local processing, and communication. Potential functions include sampling a sensor, applying threshold logic, updating a status indicator, and activating a low-power duty cycle. The current evidence confirms only the 8-bit HC08/S08 category and commercial identity. Engineers must obtain the official electrical data for active current, sleep behavior, clock setup, RAM retention, and communication peripherals before estimating battery life or defining the node's duty cycle.
پیشنهادی
Human Interface Panel
The SC9S08QE16SCLCR could manage a compact human-interface panel if its verified GPIO, timers, memory, and communication interfaces satisfy the display and input requirements. An 8-bit controller may scan switches, update LEDs, generate tones, store calibration values, and drive a host processor. The provided distributor snippets do not identify these resources, so designers should not assume display timing, serial compatibility, debounce capacity, or nonvolatile storage. Pin multiplexing, interrupt latency, firmware architecture, and user-interface timing must be validated on the final hardware.
پیشنهادی
Programmable Logic Controller
The SC9S08QE16SCLCR may be evaluated for a small programmable logic controller or fixed-function automation module when its verified real-time performance and I/O capacity match the task. Possible duties include scanning discrete inputs, executing deterministic logic, updating outputs, and operating a local status interface. The supplied evidence does not provide interrupt latency, timer resolution, memory, or supply specifications. Any deployment therefore needs worst-case execution analysis, input filtering, output fail-safe design, watchdog verification, environmental qualification, and proof that software built for the exact device remains deterministic.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای SC9S08QE16SCLCR — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول |
|---|---|
| Brand | NXP Semiconductors |
| Package | LQFP-family package indication; exact pin count not supplied |
| Processor Architecture | 8-bit |
| Series | HC08/S08 |
| Starting Price as of 2026-10-20 | $2.2595 |
| Drop-In Verification | No verified substitute in supplied data |
یادداشت‌های طراحی
اطلاعات انطباق
The verified search results provide no manufacturer compliance declarations for RoHS, REACH, AEC-Q100, lead-free status, halogen-free status, or conflict minerals. No compliance claim should be inferred from the legacy origin or distributor category.
