Skyworks Solutions

SI3200-G-GS - Dual-Channel 3.3V SLIC | Skyworks Solutions Inc.

MPN: SI3200-G-GS ✓ فعال
3.3 V Vdss 110 µA Id 16-pin SOIC with exposed pad Package
حداقل سفارش: 1 |

SI3200-G-GS نمای کلی

Skyworks Solutions Inc. SI3200-G-GS is a dual-channel Subscriber Line Interface Concept IC and telecom linefeed interface designed for voice-over-IP, voice terminal, and digital subscriber line equipment. It operates from a 3.3 V supply, supports two circuits, provides an interface specification of GCI, PCM, and SPI, and is packaged in a 16-pin SOIC with exposed-pad construction.

A Subscriber Line Interface Concept, or SLIC, is an integrated circuit category that terminates an analog telephone line, performs linefeed control, and connects the line to a digital voice processor. In the hierarchy, the SI3200-G-GS belongs to the SLIC family, telecom interface ICs, interface ICs, and ultimately integrated circuits. This dual-channel architecture lets one device handle two line channels while sharing control and power infrastructure, reducing board area in multi-line voice equipment.

Key specifications include two integrated circuits, a 3.3 V nominal supply with 5 V compatibility indicated by the device listing, a 45 mA channel-current figure, a 63 dB gain-related figure, and an operating-temperature range from -40 °C to 85 °C. GCI, PCM, and SPI interfaces allow connection to a host processor or codec, while the listed power rating of 941 mW reflects the device's maximum thermal design context rather than typical operating dissipation.

The SI3200-G-GS supports the BORSCHT functions required in line-interface equipment, which cover battery feed, overvoltage, ringing, supervision, coding, hybrid, and test functions. It also supports internal balanced and unbalanced ringing for Si3220, external bulk-ringer support for Si3225, and software-controlled operating modes associated with the Silicon Labs telecom interface family.

Typical uses include dual-channel voice gateways, Voice-over-IP terminals, digital PBX line cards, broadband voice adapters, and embedded telephone interfaces. Two channels per package are useful where a compact line card must terminate multiple subscriber loops. Designers should confirm the host-side clocking, linefeed components, hook-state implementation, and device-specific application circuit before releasing production hardware.

For layout, treat the exposed thermal pad as a heat-spreading and electrical connection that must follow the package drawing. Keep the SLIC supply and ground planes compact, place required bypass capacitors close to their pins, and isolate sensitive codec and clock routes from line-driver return currents. The 100 V linefeed rating refers to the external line interface, not to the 3.3 V device supply.

This page combines the device's core electrical limits, package constraints, application guidance, and same-package replacement analysis. It also highlights the key design distinction between low-voltage logic supply and high-voltage telephone-line exposure, helping engineers plan protection, thermal management, and PCB layout correctly.

جایگزین‌های drop-in برای SI3200-G-GS — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای SI3200-G-GS (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در BORSCHT Functions, Number of Circuits, Operating Temperature, Package, Product Type.

Skyworks Solutions
BORSCHT Functions: Per manufacturer datasheet listing
Number of Circuits: 2
Operating Temperature: -40 °C to +85 °C
مقایسه با SI3200-G-GS →

SI3200-G-FS

✅ جایگزین مستقیم
Skyworks Solutions
📦 16-pin SOIC with exposed pad
Subscriber Line Interface Concept (SLIC) IC · 2 channels · 100 V · 45 mA · 3.3 V · 63 dB · Telecom Interface IC · Dual-channel linefeed interface

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

SI3200-GS

✅ جایگزین مستقیم
Skyworks Solutions
📦 16-pin SOIC with exposed pad
مشخصات سازگار

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

SI3200-FS

✅ جایگزین مستقیم
Skyworks Solutions
📦 16-pin SOIC with exposed pad
Subscriber Line Interface Concept (SLIC) linefeed interface IC · 2 · GCI, PCM, SPI · 3.3 V, 5 V · 110 uA · 941 mW · -40 °C to +85 °C · 16-pin SOIC

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

SI3200-G-GS مشخصات

Product Type Subscriber Line Interface Concept (SLIC) and telecom linefeed interface IC
Number of Circuits 2 channels
نوع رابط GCI, PCM, and SPI
Nominal Supply Voltage 3.3 V
Supported Supply Voltage 3.3 V and 5 V
جریان تغذیه 110 µA
Channel Current 45 mA
Gain 63 dB
Maximum Linefeed Voltage 100 V
Power Rating 941 mW
دمای کاری -40 °C to 85 °C
بسته‌بندی 16-pin SOIC with exposed pad
نوع نصب Surface mount
BORSCHT Functions Supported
Internal Ringing Support Balanced and unbalanced ringing for Si3220
Bulk Ringer Support External bulk ringer support for Si3225
Lead-Free Status Lead-free
وضعیت RoHS Details listed as RoHS

راهنمای پیکربندی پین SI3200-G-GS 16-pin soic with exposed pad

پیکربندی پین برای SI3200-G-GS (پکیج 16-pin soic with exposed pad). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 16-pin soic with exposed pad برای SI3200-G-GS

داده پین‌آوت تفصیلی موجود نیست برای SI3200-G-GS.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

SI3200-G-GS مناسب است برای 6 کاربردs: Dual-Channel Voice-over-IP Terminal, Digital PBX Line Card, Broadband Voice Adapter, Analog Telephone Interface Card, Industrial Telephone Monitoring Interface, VoIP Endpoint and ATA Platform.

📞

Dual-Channel Voice-over-IP Terminal

The SI3200-G-GS fits a Voice-over-IP terminal that must terminate two analog subscriber lines while passing voice traffic to a digital processor. Its two integrated SLIC channels consolidate two line interfaces into one 16-pin SOIC package, and the listed GCI, PCM, and SPI connectivity supports host-oriented digital control. The 3.3 V operating point is suitable for compact embedded voice hardware, while the 100 V linefeed rating belongs to the protected telephone-line side rather than the logic rail. Designers must add the required external protection, ringing, linefeed, and codec networks, and should route high-voltage line-side nets separately from the 3.3 V digital section.

🏢

Digital PBX Line Card

A digital PBX line card can use the SI3200-G-GS to add two subscriber-line terminations without assigning a separate SLIC package to every channel. The dual-channel architecture reduces component count, while the GCI, PCM, and SPI interfaces allow the line card to connect to its channel codec and control processor. Its listed 110 µA supply current, 3.3 V operation, and -40 °C to 85 °C range support compact industrial or telecommunications equipment. The board still needs adequate protection from subscriber-side transients and careful isolation between linefeed current paths and low-level codec signals.

🌐

Broadband Voice Adapter

The SI3200-G-GS is appropriate for a broadband voice adapter that bridges analog telephone wiring to an Ethernet-connected voice gateway. Two SLIC channels can support two simultaneous line connections, while the digital interface carries voice and control traffic to a processor. The 63 dB gain figure, 45 mA channel-current capability, and 3.3 V supply are useful attributes when sizing the analog front end. Because the device exposes a 100 V linefeed environment, the adapter must include correctly rated protection components and preserve the manufacturer-specified separation between line-side and logic-side copper.

☎️

Analog Telephone Interface Card

The SI3200-G-GS can terminate two analog telephone lines on a dedicated interface card for paging, intercom, or legacy phone-system bridging. Its Subscriber Line Interface Concept role and listed BORSCHT support provide the relevant line-control functions, while internal balanced and unbalanced ringing support for Si3220 expands implementation options. The SOIC exposed-pad package is manageable in a multichannel card because one package handles two circuits, but thermal copper and line-side protection remain essential. Validate hook-state behavior, codec timing, and ringing implementations against the manufacturer reference design.

🏭

Industrial Telephone Monitoring Interface

For industrial monitoring equipment that must connect legacy analog phone lines, the SI3200-G-GS provides a dual-channel interface to a control processor through GCI, PCM, or SPI. The two-channel arrangement can monitor two lines while sharing supply and control infrastructure, and the 3.3 V operation integrates readily with modern embedded logic. Its -40 °C to 85 °C operating range supports equipment intended for controlled industrial environments. The implementation must include the external high-voltage line interface, ringing paths, and protection network, and should avoid placing sensitive measurement or control traces beneath line-side nodes.

📱

VoIP Endpoint and ATA Platform

The SI3200-G-GS is well suited to a Voice-over-IP endpoint or analog telephone adapter that needs two subscriber-line channels in a small board area. Its dual-channel SLIC organization limits the number of line-interface packages, and the listed PCM or GCI options support digital voice transport to the endpoint processor. The 3.3 V supply, 110 µA supply-current figure, and -40 °C to 85 °C range are useful for compact customer-premises equipment. Final design work should verify clocking, gain distribution, codec selection, exposed-pad soldering, and the required subscriber-line protection components.

What are the key specifications of SI3200-G-GS that engineers should know?
The SI3200-G-GS is a dual-channel 3.3 V SLIC with GCI, PCM, and SPI interfaces, a -40 °C to 85 °C operating range, and a 16-pin SOIC exposed-pad package. Product listings also identify 110 µA supply current, 45 mA channel current, 63 dB gain, a 941 mW power rating, and a 100 V linefeed interface. According to the manufacturer-derived specification listing, the device performs BORSCHT functions and supports internal ringing for Si3220 and external bulk ringing for Si3225.
What is the operating voltage of SI3200-G-GS?
The SI3200-G-GS operates at a nominal 3.3 V supply and is also listed as supporting 3.3 V and 5 V operation. The 100 V figure associated with this part describes the telephone linefeed interface rather than the logic supply. According to the device specification listing, supply current is 110 µA. Confirm the exact operating limits and decoupling requirements in the manufacturer datasheet before applying the IC to a new line-card design.
Where can I download the SI3200-G-GS datasheet PDF?
The SI3200-G-GS datasheet can be accessed through the Octopart datasheet page at https://octopart.com/datasheet/silicon-labs/SI3200-G-GS. The manufacturer-derived specifications identify a 16-pin SOIC exposed-pad telecom interface IC with two channels. Use the package drawing and pin-description table in that document to assign PCB nets, especially for supply, ground, the exposed pad, and linefeed-related pins.
Where can I find the SI3200-G-GS pinout?
The SI3200-G-GS pinout is published through the device datasheet and package documentation linked from https://octopart.com/datasheet/silicon-labs/SI3200-G-GS. Its package is identified as a 16-pin SOIC with exposed pad. Because the exposed-pad construction is not represented by the available package-diagram library, verify every numbered lead and the exposed-pad connection directly against the manufacturer drawing before drilling vias or assigning PCB tracks.
What can replace the SI3200-G-GS in a dual-channel line interface?
The closest identified same-family drop-in candidates are SI3200-G-FS and SI3200-GS, both listed in 16-pin SOIC telecom-interface packages. SI3200-G-FS appears in the cross-reference results as another SLIC, while SI3200-GS is described as a 100 V linefeed interface requiring two units for a dual-channel chipset. Confirm device revision, firmware, host interface, linefeed circuitry, and exposed-pad requirements before treating either candidate as a production replacement.
Is SI3200-G-GS the same as SI3200-G-FS?
No direct equivalence should be assumed solely because SI3200-G-GS and SI3200-G-FS are both associated with the 16-pin SOIC SLIC family. The cross-reference listing identifies SI3200-G-FS as a telecom interface IC, but the available information does not establish identical pin functions, firmware, electrical limits, or register behavior. Review the manufacturer pin tables and application notes for both parts before substituting SI3200-G-FS into an existing board.
SI3200-G-GS vs SI3200-GS: which is better for a dual-channel design?
SI3200-G-GS integrates two SLIC channels in one package, while the SI3200-GS listing states that two units are needed for a dual-channel chipset. Both are described as 100 V linefeed interface ICs in the available listings, so SI3200-G-GS can reduce component count and board area when its two channels are pin-compatible with the design. SI3200-GS may still be useful where separate channel placement, independent qualification, or established production tooling is required.
When should I choose SI3200-G-GS instead of two single-channel SLIC devices?
Choose SI3200-G-GS when the design needs two subscriber-line channels and the host processor can support the device's GCI, PCM, or SPI arrangement. The integrated dual-channel configuration can reduce package count and simplify shared supply routing compared with two separate line-interface ICs. Retain single-channel devices when independent thermal paths, channel isolation, field replacement, or an already qualified single-channel footprint is more important than board-area reduction.
Is SI3200-G-GS suitable for Voice-over-IP and digital PBX equipment?
Yes, the SI3200-G-GS is suitable for telecom interfaces requiring two telephone-line channels, including Voice-over-IP terminals and digital PBX line-card functions. Its 3.3 V supply, GCI/PCM/SPI interfaces, 100 V linefeed classification, and BORSCHT support align with embedded voice-system architecture. The complete application still requires correctly designed external linefeed, protection, isolation, ringing, and codec circuits around the IC.
What are the thermal and decoupling requirements for SI3200-G-GS?
Place the SI3200-G-GS bypass capacitors directly beside the device supply and ground connections, and provide adequate copper around the exposed pad for heat spreading. The listed maximum power rating is 941 mW, while typical dissipation depends on the actual supply voltage, channel activity, and linefeed operating state. Use the manufacturer power-dissipation equations to determine whether exposed-pad copper alone is adequate or whether additional thermal spreading is required.
How should the 3.3 V supply and 100 V line interface be handled on the PCB?
Keep the 3.3 V supply routing compact and separate from the exposed telephone-line and linefeed paths, because 100 V describes the line-side voltage rather than the IC supply. The listed 63 dB gain, 45 mA channel-current capability, and 100 V linefeed interface make layout isolation critical for signal integrity and safety. Follow the manufacturer reference layout for protection components, ringing paths, and high-voltage creepage rather than routing line-side nets like ordinary logic signals.
Where can I buy SI3200-G-GS online?
Use the Request a Quote form on this page to request current SI3200-G-GS availability, lead time, and order handling. The device is listed by multiple authorized distribution channels, but current commercial terms can change independently of technical documentation. Provide the exact SI3200-G-GS suffix, required quantity, date code, and packaging preference in the quotation request to avoid ambiguity.
What is the price of SI3200-G-GS?
The current SI3200-G-GS unit price is shown through the structured pricing area on this page, and the Request a Quote form provides a direct way to confirm the amount for your quantity. Historical web information lists a unit-price range, but it does not provide a current quantity-break table suitable for copying into the page's live pricing tiers. Request a quotation for the exact package suffix, date code, and volume needed for production.
What is the lead time for SI3200-G-GS?
The current SI3200-G-GS lead time must be confirmed through the Request a Quote form on this page because stock and manufacturing schedules can vary by volume and date code. Include your target quantity, acceptable delivery window, and whether an obsolete or active device is permitted. A lead-time confirmation tied to the exact MPN is more useful than a generic availability statement for this telecom interface IC.
Is SI3200-G-GS in stock?
Current SI3200-G-GS stock should be confirmed through the Request a Quote form on this page. The part is offered as a catalog component, but distributor inventory changes quickly and may not match a multi-year production plan. Specify quantity, reel or tray preference, date-code requirement, and acceptable partial shipment policy so the supplier can return an actionable availability response.
What is the best cross-brand equivalent for SI3200-G-GS?
No verified cross-brand drop-in equivalent was identified for the SI3200-G-GS, so the closest documented options are from the same manufacturer family rather than another supplier. The SI3200-G-FS and SI3200-GS appear in the cross-reference results, but the available information does not prove identical pin functions, firmware, electrical characteristics, or exposed-pad behavior. Treat them as candidates for engineering review, not guaranteed substitutions, and use the manufacturer documentation to confirm compatibility.

داده‌های مرجع مهندسی برای SI3200-G-GS — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the SI3200-G-GS when a compact voice interface needs two SLIC channels in one package and its GCI, PCM, or SPI configuration fits the host processor. It is particularly useful for VoIP terminals, analog telephone adapters, and digital PBX line cards where reducing line-interface package count improves routing and board utilization. Select SI3200-GS when the established design uses single-channel devices or requires independent placement of two line channels. Evaluate SI3200-G-FS or SI3200-FS only after checking their pin functions, firmware, electrical limits, and application circuits against the existing board. None of the listed replacements should be approved solely by package appearance: confirm exposed-pad connection, subscriber-line protection, ringing behavior, clocking, codec compatibility, and production test requirements before substitution.

مقایسه با جایگزین‌ها

پارامتر این محصول SI3200-G-FS SI3200-GS SI3200-FS
Brand Skyworks Solutions Inc. Skyworks Solutions Inc. Skyworks Solutions Inc. Skyworks Solutions Inc.
Package 16-pin SOIC with exposed pad 16-pin SOIC with exposed pad 16-pin SOIC with exposed pad 16-pin SOIC with exposed pad
Device Type Dual-channel SLIC and telecom linefeed interface IC Telecom interface IC 100 V linefeed interface IC SLIC telecom interface IC

تفاوت‌های کلیدی

  • Two SLIC channels integrated in one package (در مقابلSI3200-GS)
  • Documented multi-interface control (در مقابلSI3200-G-FS)
  • Compact 3.3 V telecom integration (در مقابلSI3200-FS)

یادداشت‌های طراحی

Separate the 3.3 V logic supply from the 100 V subscriber-line environment at the board-layout level. Route linefeed, ringing, and protection networks according to the manufacturer reference design, maintain the specified clearance between line-side copper and low-level signal areas, and avoid placing codec or clock traces directly beneath high-voltage linefeed paths. This separation is essential because the 100 V rating belongs to the telephone interface rather than the device supply domain.

Use the exposed pad as both a thermal spreader and the package-specified electrical connection. Provide a continuous ground or other required pad connection beneath the device, follow the manufacturer land pattern, and use a controlled solder process to avoid voids. Although the listed power rating is 941 mW, actual dissipation depends on supply voltage, linefeed state, channel activity, and ambient temperature; calculate worst-case dissipation rather than assuming the maximum rating is continuously dissipated.

Place bypass capacitors immediately beside the SI3200-G-GS supply and ground pins and keep their current loops as small as practical. The listed 110 µA supply current does not describe the complete linefeed power budget, which also includes external switching and protection components. Verify startup, supply sequencing, and the interaction between the 3.3 V rail and ringing-control circuitry against the manufacturer application guidance before releasing the layout.

Do not treat a shared package name as proof that any SI3200 variant is interchangeable. The SI3200-G-GS, SI3200-G-FS, SI3200-GS, and SI3200-FS differ in documented configuration or require missing parameters to be confirmed, including channel count, interface set, firmware, and pin functions. For every proposed substitution, compare the manufacturer pin-description tables, application circuits, electrical limits, and exposed-pad requirements rather than relying on distributor categories alone.

اطلاعات انطباق

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Yes
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The product listings identify the SI3200-G-GS as lead-free, and the cross-reference listing reports RoHS details. The device is a telecom interface IC rather than an automotive-qualified component; no AEC-Q100 evidence is present.

تاریخ تأیید داده‌ها: 2026-11-15 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

si3200 24h pwr scm si3200 SI3200-G-GS datasheet SI3200-G-GS datasheet pdf SI3200-G-GS pinout SI3200-G-GS specifications SI3200-G-GS equivalent SI3200-G-GS replacement SI3200-G-GS vs SI3200-GS SI3200-G-GS price SI3200-G-GS stock Skyworks Solutions SI3200-G-GS SI3200-G-GS 16 pin SOIC SI3200-G-GS VoIP interface

قطعات و اصطلاحات مرتبط

Skyworks Solutions Inc. Silicon Labs SI3200-G-GS SI3200-G-FS SI3200-GS SI3200-FS SLIC Subscriber Line Interface Concept telecom interface IC integrated circuit GCI PCM SPI BORSCHT functions linefeed interface 100 V linefeed 3.3 V supply balanced ringing unbalanced ringing Si3220 Si3225 SOIC-16 exposed pad Voice-over-IP digital PBX
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ