SI3200-G-GS - Dual-Channel 3.3V SLIC | Skyworks Solutions Inc.
MPN: SI3200-G-GS ✓ ActiveSI3200-G-GS Overview
A Subscriber Line Interface Concept, or SLIC, is an integrated circuit category that terminates an analog telephone line, performs linefeed control, and connects the line to a digital voice processor. In the hierarchy, the SI3200-G-GS belongs to the SLIC family, telecom interface ICs, interface ICs, and ultimately integrated circuits. This dual-channel architecture lets one device handle two line channels while sharing control and power infrastructure, reducing board area in multi-line voice equipment.
Key specifications include two integrated circuits, a 3.3 V nominal supply with 5 V compatibility indicated by the device listing, a 45 mA channel-current figure, a 63 dB gain-related figure, and an operating-temperature range from -40 °C to 85 °C. GCI, PCM, and SPI interfaces allow connection to a host processor or codec, while the listed power rating of 941 mW reflects the device's maximum thermal design context rather than typical operating dissipation.
The SI3200-G-GS supports the BORSCHT functions required in line-interface equipment, which cover battery feed, overvoltage, ringing, supervision, coding, hybrid, and test functions. It also supports internal balanced and unbalanced ringing for Si3220, external bulk-ringer support for Si3225, and software-controlled operating modes associated with the Silicon Labs telecom interface family.
Typical uses include dual-channel voice gateways, Voice-over-IP terminals, digital PBX line cards, broadband voice adapters, and embedded telephone interfaces. Two channels per package are useful where a compact line card must terminate multiple subscriber loops. Designers should confirm the host-side clocking, linefeed components, hook-state implementation, and device-specific application circuit before releasing production hardware.
For layout, treat the exposed thermal pad as a heat-spreading and electrical connection that must follow the package drawing. Keep the SLIC supply and ground planes compact, place required bypass capacitors close to their pins, and isolate sensitive codec and clock routes from line-driver return currents. The 100 V linefeed rating refers to the external line interface, not to the 3.3 V device supply.
This page combines the device's core electrical limits, package constraints, application guidance, and same-package replacement analysis. It also highlights the key design distinction between low-voltage logic supply and high-voltage telephone-line exposure, helping engineers plan protection, thermal management, and PCB layout correctly.
Drop-in alternatives for SI3200-G-GS — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with SI3200-G-GS (same form factor and footprint) — differing in BORSCHT Functions, Number of Circuits, Operating Temperature, Package, Product Type.
SI3200-G-FS
✅ Drop-InContact for price
View Datasheet →SI3200-GS
✅ Drop-InContact for price
View Datasheet →SI3200-FS
✅ Drop-InContact for price
View Datasheet →SI3200-G-GS Specifications
| Product Type | Subscriber Line Interface Concept (SLIC) and telecom linefeed interface IC |
| Number of Circuits | 2 channels |
| Interface Type | GCI, PCM, and SPI |
| Nominal Supply Voltage | 3.3 V |
| Supported Supply Voltage | 3.3 V and 5 V |
| Supply Current | 110 µA |
| Channel Current | 45 mA |
| Gain | 63 dB |
| Maximum Linefeed Voltage | 100 V |
| Power Rating | 941 mW |
| Operating Temperature | -40 °C to 85 °C |
| Package | 16-pin SOIC with exposed pad |
| Mounting Type | Surface mount |
| BORSCHT Functions | Supported |
| Internal Ringing Support | Balanced and unbalanced ringing for Si3220 |
| Bulk Ringer Support | External bulk ringer support for Si3225 |
| Lead-Free Status | Lead-free |
| RoHS Status | Details listed as RoHS |
SI3200-G-GS 16-pin soic with exposed pad Pin Configuration Guide
Pin configuration for SI3200-G-GS (16-pin soic with exposed pad package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for SI3200-G-GS.
Refer to the datasheet for full pin configuration.
Typical Applications
SI3200-G-GS is suitable for 6 applications: Dual-Channel Voice-over-IP Terminal, Digital PBX Line Card, Broadband Voice Adapter, Analog Telephone Interface Card, Industrial Telephone Monitoring Interface, VoIP Endpoint and ATA Platform.
Dual-Channel Voice-over-IP Terminal
The SI3200-G-GS fits a Voice-over-IP terminal that must terminate two analog subscriber lines while passing voice traffic to a digital processor. Its two integrated SLIC channels consolidate two line interfaces into one 16-pin SOIC package, and the listed GCI, PCM, and SPI connectivity supports host-oriented digital control. The 3.3 V operating point is suitable for compact embedded voice hardware, while the 100 V linefeed rating belongs to the protected telephone-line side rather than the logic rail. Designers must add the required external protection, ringing, linefeed, and codec networks, and should route high-voltage line-side nets separately from the 3.3 V digital section.
Recommended
Digital PBX Line Card
A digital PBX line card can use the SI3200-G-GS to add two subscriber-line terminations without assigning a separate SLIC package to every channel. The dual-channel architecture reduces component count, while the GCI, PCM, and SPI interfaces allow the line card to connect to its channel codec and control processor. Its listed 110 µA supply current, 3.3 V operation, and -40 °C to 85 °C range support compact industrial or telecommunications equipment. The board still needs adequate protection from subscriber-side transients and careful isolation between linefeed current paths and low-level codec signals.
Recommended
Broadband Voice Adapter
The SI3200-G-GS is appropriate for a broadband voice adapter that bridges analog telephone wiring to an Ethernet-connected voice gateway. Two SLIC channels can support two simultaneous line connections, while the digital interface carries voice and control traffic to a processor. The 63 dB gain figure, 45 mA channel-current capability, and 3.3 V supply are useful attributes when sizing the analog front end. Because the device exposes a 100 V linefeed environment, the adapter must include correctly rated protection components and preserve the manufacturer-specified separation between line-side and logic-side copper.
Recommended
Analog Telephone Interface Card
The SI3200-G-GS can terminate two analog telephone lines on a dedicated interface card for paging, intercom, or legacy phone-system bridging. Its Subscriber Line Interface Concept role and listed BORSCHT support provide the relevant line-control functions, while internal balanced and unbalanced ringing support for Si3220 expands implementation options. The SOIC exposed-pad package is manageable in a multichannel card because one package handles two circuits, but thermal copper and line-side protection remain essential. Validate hook-state behavior, codec timing, and ringing implementations against the manufacturer reference design.
Recommended
Industrial Telephone Monitoring Interface
For industrial monitoring equipment that must connect legacy analog phone lines, the SI3200-G-GS provides a dual-channel interface to a control processor through GCI, PCM, or SPI. The two-channel arrangement can monitor two lines while sharing supply and control infrastructure, and the 3.3 V operation integrates readily with modern embedded logic. Its -40 °C to 85 °C operating range supports equipment intended for controlled industrial environments. The implementation must include the external high-voltage line interface, ringing paths, and protection network, and should avoid placing sensitive measurement or control traces beneath line-side nodes.
Recommended
VoIP Endpoint and ATA Platform
The SI3200-G-GS is well suited to a Voice-over-IP endpoint or analog telephone adapter that needs two subscriber-line channels in a small board area. Its dual-channel SLIC organization limits the number of line-interface packages, and the listed PCM or GCI options support digital voice transport to the endpoint processor. The 3.3 V supply, 110 µA supply-current figure, and -40 °C to 85 °C range are useful for compact customer-premises equipment. Final design work should verify clocking, gain distribution, codec selection, exposed-pad soldering, and the required subscriber-line protection components.
Recommended
Recommended Products Summary
Engineering reference data for SI3200-G-GS — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | SI3200-G-FS | SI3200-GS | SI3200-FS |
|---|---|---|---|---|
| Brand | Skyworks Solutions Inc. | Skyworks Solutions Inc. | Skyworks Solutions Inc. | Skyworks Solutions Inc. |
| Package | 16-pin SOIC with exposed pad | 16-pin SOIC with exposed pad | 16-pin SOIC with exposed pad | 16-pin SOIC with exposed pad |
| Device Type | Dual-channel SLIC and telecom linefeed interface IC | Telecom interface IC | 100 V linefeed interface IC | SLIC telecom interface IC |
Key Differentiators
- Two SLIC channels integrated in one package (vs SI3200-GS)
- Documented multi-interface control (vs SI3200-G-FS)
- Compact 3.3 V telecom integration (vs SI3200-FS)
Design Notes
Separate the 3.3 V logic supply from the 100 V subscriber-line environment at the board-layout level. Route linefeed, ringing, and protection networks according to the manufacturer reference design, maintain the specified clearance between line-side copper and low-level signal areas, and avoid placing codec or clock traces directly beneath high-voltage linefeed paths. This separation is essential because the 100 V rating belongs to the telephone interface rather than the device supply domain.
Use the exposed pad as both a thermal spreader and the package-specified electrical connection. Provide a continuous ground or other required pad connection beneath the device, follow the manufacturer land pattern, and use a controlled solder process to avoid voids. Although the listed power rating is 941 mW, actual dissipation depends on supply voltage, linefeed state, channel activity, and ambient temperature; calculate worst-case dissipation rather than assuming the maximum rating is continuously dissipated.
Place bypass capacitors immediately beside the SI3200-G-GS supply and ground pins and keep their current loops as small as practical. The listed 110 µA supply current does not describe the complete linefeed power budget, which also includes external switching and protection components. Verify startup, supply sequencing, and the interaction between the 3.3 V rail and ringing-control circuitry against the manufacturer application guidance before releasing the layout.
Do not treat a shared package name as proof that any SI3200 variant is interchangeable. The SI3200-G-GS, SI3200-G-FS, SI3200-GS, and SI3200-FS differ in documented configuration or require missing parameters to be confirmed, including channel count, interface set, firmware, and pin functions. For every proposed substitution, compare the manufacturer pin-description tables, application circuits, electrical limits, and exposed-pad requirements rather than relying on distributor categories alone.
Compliance Information
The product listings identify the SI3200-G-GS as lead-free, and the cross-reference listing reports RoHS details. The device is a telecom interface IC rather than an automotive-qualified component; no AEC-Q100 evidence is present.