STM32F103VEH6TR - 32-Bit 72MHz Cortex-M3 MCU | STMicroelectronics (Tape & Reel)
MPN: STM32F103VEH6TR ✓ فعالSTM32F103VEH6TR نمای کلی
جایگزین‌های drop-in برای STM32F103VEH6TR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای STM32F103VEH6TR (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Communication Interfaces, Core, Flash Memory, Series.
STM32F103VET6
✅ جایگزین مستقیم✗ ناموجود
$3.85 / واحد
مشاهده دیتاشیت ←STM32F103V8T6
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←STM32F103VBI6
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←GD32F103
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
AT32F403ARGT7
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←STM32F103VEH6TR حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core | ARM Cortex-M3 |
| Processor Bit Width | 32 bit |
| حداکثر فرکانس کلاک | 72 MHz |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bit |
| Series | STM32F1 |
| Product Type | ARM-based high-density performance line microcontroller |
| USB | Supported |
| CAN | Supported |
| Timer Count | 11 timers |
| ADC Count | 3 ADCs |
| Communication Interfaces | 13 communication interfaces |
| بسته‌بندی | 100-pin LQFP |
| نوع نصب | Surface Mount |
راهنمای پیکربندی پین STM32F103VEH6TR 100-pin lqfp
پیکربندی پین برای STM32F103VEH6TR (پکیج 100-pin lqfp). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.
داده پین‌آوت تفصیلی موجود نیست برای STM32F103VEH6TR.
به دیتاشیت برای پیکربندی کامل پین‌ها.
کاربردهای معمول
STM32F103VEH6TR مناسب است برای 6 کاربردs: USB-to-CAN Industrial Gateway, CAN-Connected Sensor Node, USB Firmware Update Controller, Industrial Data Acquisition Unit, Motor-Control and Timing Platform, Consumer and Communication Controller.
USB-to-CAN Industrial Gateway
The STM32F103VEH6TR fits a USB-to-CAN gateway because the verified device data identifies integrated USB and CAN connectivity, a 72 MHz Cortex-M3 core, 11 timers, and 3 ADCs. The MCU can manage USB command handling, CAN frame processing, local diagnostics, and basic analog supervision without requiring a separate interface controller. Place the MCU beside the appropriate USB and CAN transceivers, route interface traces away from switching nodes, and validate protocol timing under real bus load. The 512 KB Flash configuration provides useful space for firmware, bootloader logic, and communication stacks, although exact peripheral multiplexing and electrical limits must be confirmed from the official datasheet.
پیشنهادی
CAN-Connected Sensor Node
The STM32F103VEH6TR is suitable for a CAN-connected sensor node because the device combines CAN support, three ADCs, and a 72 MHz 32-bit core. The MCU can sample analog sensors, apply filtering and calibration, timestamp measurements, and publish results through a CAN protocol while retaining headroom for local status indicators and configuration storage. Use the ADC inputs with defined analog ground and filtering, and select an external CAN transceiver whose speed, supply, fault protection, and isolation match the installation. Verify ADC accuracy requirements and pin assignments from the manufacturer datasheet before finalizing the node.
پیشنهادی
USB Firmware Update Controller
The STM32F103VEH6TR can act as a USB-connected firmware update and configuration controller for embedded equipment. Its verified USB support and 512 KB Flash provide room for a bootloader, application image, and update metadata, while the Cortex-M3 core can handle USB enumeration and flash programming tasks. The design should include a controlled boot-mode entry method, write protection, brownout monitoring, and recovery behavior for interrupted updates. Confirm the exact USB device or host role, clock configuration, flash endurance requirements, and package pin assignments using the official STM32F103xE documentation.
پیشنهادی
Industrial Data Acquisition Unit
The STM32F103VEH6TR is appropriate for compact industrial data-acquisition equipment because it combines three ADCs, 13 communication interfaces, 11 timers, and a 72 MHz processing core. Engineers can use the MCU to sample analog channels, process sensor data, maintain timing, and bridge the results to USB, CAN, or other serial links. The high-density 100-pin LQFP package provides access to many GPIO and peripheral pins, but analog front-end design remains important: use suitable excitation, filtering, grounding, and protection around each ADC input. Validate scaling, sampling latency, and channel multiplexing against the target measurement accuracy.
پیشنهادی
Motor-Control and Timing Platform
The STM32F103VEH6TR supports motor-control and timing platforms that require deterministic peripheral resources and a fast 32-bit core. The verified feature set includes 11 timers and three ADCs, enabling motor-drive timing, current or position sensing, fault monitoring, and supervisory control functions. Timer channels and ADC triggers should be assigned only after checking the exact pin mux in the official datasheet, because package pins may be shared with alternate functions. External gate drivers, power-stage protection, current sensing, and emergency shutdown circuitry remain outside the MCU and must be designed for the motor voltage and fault conditions.
پیشنهادی
Consumer and Communication Controller
The STM32F103VEH6TR can serve as a compact control hub in consumer accessories and communication equipment where USB, CAN, timing, and mixed-signal functions are useful. The 32-bit Cortex-M3 core can coordinate user inputs, status indicators, communications, and local control logic, while the 100-pin package exposes a broad peripheral set. For a consumer product, firmware partitioning, brownout behavior, ESD protection, and long-term supply planning should be addressed early. Do not assume that a related STM32F103 MPN is interchangeable without checking suffix-specific temperature, memory, package, and lifecycle requirements.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای STM32F103VEH6TR — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | STM32F103VET6 | STM32F103V8T6 | GD32F103 | AT32F403A |
|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | GigaDevice | Artery Technology |
| Package | 100-pin LQFP | 100-pin LQFP | 100-pin LQFP | 100-pin LQFP | 100-pin LQFP |
تفاوت‌های کلیدی
- Verified 512 KB Flash configuration (در مقابلSTM32F103V8T6)
- Confirmed 72 MHz operating class (در مقابلGD32F103)
- STMicroelectronics ecosystem continuity (در مقابلAT32F403A)
یادداشت‌های طراحی
Decouple every required MCU supply rail close to its associated pins, using the capacitor values and placement guidance in the official STM32F103xE datasheet. Keep analog and digital return paths controlled, provide a clean reset and clock path, and account for the transient current required by USB and CAN transceiver operation. The verified data confirms USB and CAN support but does not provide the complete power-tree values, so do not infer those values from this summary.
Route USB and CAN interfaces with short, controlled traces and provide the external transceivers specified by the selected interface architecture. Keep switching-regulator loops and high-current motor traces away from ADC inputs and communication lines. The 100-pin LQFP package requires careful fanout and decoupling placement; confirm the land pattern, pin numbering, and exposed thermal or electrical requirements from the official mechanical documentation before release.
Do not treat a related STM32F103 or cross-brand MCU as an automatic drop-in replacement. Check exact suffix, package, memory size, temperature grade, clock tree, peripheral multiplexing, USB and CAN electrical requirements, startup behavior, and firmware dependencies. The supplied cross-reference sources describe candidates such as GD32F103 and AT32F403A, but the data does not provide enough verified detail to approve production substitution without engineering validation.
اطلاعات انطباق
The supplied verified data does not explicitly provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for STM32F103VEH6TR. Confirm exact suffix documentation with STMicroelectronics.
