Texas Instruments

TLV2371ID - 3MHz RRIO Op Amp | Texas Instruments

MPN: TLV2371ID ✓ فعال
2.7 V Vdss 550 µA per channel Id 8-pin SOIC Package
حداقل سفارش: 1 |

TLV2371ID نمای کلی

The Texas Instruments TLV2371ID is a single-supply, rail-to-rail input and output operational amplifier with a 3 MHz gain-bandwidth product, 2.1 V/us slew rate, and operation from 2.7 V to 16 V in an 8-pin SOIC package. It combines rail-to-rail signal handling with a low 550 µA quiescent-current demand, making it suitable for portable instrumentation, sensor interfaces, and low-power analog systems. The TLV2371ID also includes a shutdown function for reducing supply current when the amplifier is not needed.

A rail-to-rail operational amplifier is an analog amplifier whose input common-mode range and output voltage swing extend close to the positive and negative supply rails. This capability helps designers use nearly the full voltage range of a low-voltage supply while preserving usable signal range. In the broader component hierarchy, the TLV2371 belongs to the operational-amplifier family, combines with analog signal-chain ICs, and ultimately supports the wider category of analog and mixed-signal semiconductors.

The headline operating characteristics include a 3 MHz gain-bandwidth product, 2.1 V/us slew rate, and 550 µA quiescent current. Its rail-to-rail input and output behavior supports low-voltage designs in which the signal may approach either supply rail. The 2.7 V minimum operating supply is suitable for modern 3.3 V systems, while the 16 V maximum recommended supply provides additional flexibility for industrial and instrumentation applications operating from higher rails.

The single-amplifier architecture makes the TLV2371ID appropriate for independent gain, filtering, buffering, and level-shifting stages. A reported input bias current of 1 pA is particularly useful when high-impedance sources must not be heavily loaded. The 4.5 mV offset figure identified for the device helps engineers characterize small-signal accuracy, while the 2.1 V/us slew rate influences how quickly the output can follow large-signal transitions.

Typical uses include low-power sensor conditioning, battery-powered monitoring, current measurement, signal buffering, and general-purpose analog gain stages. The shutdown control can also reduce power consumption in intermittently sampled systems. In designs operating near the supply rails, engineers should account for input and output range limits, output loading, and the transition behavior associated with the rail-to-rail architecture.

When laying out an 8-pin SOIC implementation, place the decoupling capacitor close to the supply pins and connect the shutdown control to a defined logic level. Avoid leaving the shutdown pin floating, and check its required polarity in the manufacturer datasheet before finalizing control logic. Stable feedback-network layout and guarding of high-impedance inputs remain important for preserving accuracy.

This page combines the manufacturer electrical characteristics, ordering information, drop-in alternatives, and practical design guidance to support component selection and PCB implementation. It also highlights where shutdown polarity, supply limits, and input behavior must be checked during schematic review.

جایگزین‌های drop-in برای TLV2371ID — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای TLV2371ID (همان فرم‌فاکتور و فوت‌پرینت).

TLV2371IDG4

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-pin SOIC
Same TLV2371 electrical configuration and 8-pin SOIC footprint; ordering suffix differs by green-assembly designation, with no stated change to the 3 MHz bandwidth or 550 µA quiescent current.

📋 جایگزین مرجع (خارج از کاتالوگ)

TLV2371IDR

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-pin SOIC
Same TLV2371 electrical configuration and 8-pin SOIC footprint; ordering suffix differs for large reel packaging, with no stated change to the 3 MHz bandwidth or 550 µA quiescent current.

📋 جایگزین مرجع (خارج از کاتالوگ)

TLV2371ID حداکثر مقادیر مجاز و مشخصات الکتریکی

Amplifier Type Single operational amplifier
Number of Channels 1 channel
Gain-Bandwidth Product 3 MHz
Slew Rate 2.1 V/us
Minimum Operating Supply Voltage 2.7 V
Maximum Recommended Supply Voltage 16 V
جریان سکون 550 µA per channel
Input Offset Voltage 4.5 mV
Input Bias Current 1 pA
Input Common-Mode Range Rail-to-rail
Output Voltage Swing Rail-to-rail
Shutdown Control Yes
محدوده دمای کاری Extended industrial temperature range
بسته‌بندی 8-pin SOIC
نوع نصب Surface mount
وضعیت RoHS Compliant

پیکربندی پین TLV2371ID

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
پین 1 OUT — Operational-amplifier output
پین 2 V- — Negative supply or ground connection
پین 3 +IN — Noninverting input
پین 4 -IN — Inverting input
پین 5 NC — Not connected
پین 6 SHDN — Shutdown control input
پین 7 + — Positive supply
پین 8 V+ — Positive supply connection

کاربردهای معمول

TLV2371ID مناسب است برای 6 کاربردs: Low-Power Sensor Signal Conditioning, Battery-Powered Monitoring Circuit, Current-Shunt Amplifier, Precision Analog Signal Buffer, Active Low-Pass Filter, Industrial Control and Instrumentation.

🧩

Low-Power Sensor Signal Conditioning

The TLV2371ID fits low-power sensor-conditioning stages that require useful signal swing from a 2.7 V minimum supply. Its rail-to-rail input range allows the amplifier to process signals near the supply rails, while the reported 1 pA input bias current minimizes disturbance of high-impedance sensors. The 3 MHz gain-bandwidth product supports moderate-bandwidth instrumentation, and the 550 µA quiescent current limits idle demand. In a typical implementation, the device amplifies a sensor output and drives a sampled ADC or comparator input. Designers should still select suitable feedback resistors and check the output range against the connected load.

📱

Battery-Powered Monitoring Circuit

The TLV2371ID is appropriate for battery-powered monitoring circuits where every milliamp can shorten operating time. It operates from 2.7 V to 16 V and consumes 550 µA quiescent current, providing a useful low-power foundation for portable sensing and threshold-detection blocks. Rail-to-rail input and output behavior increases usable signal range in compact 3.3 V systems. The shutdown function can further reduce consumption when measurements occur intermittently. A practical design should define the shutdown logic level, confirm the required measurement bandwidth, and verify that output loading does not materially increase supply current.

⚡

Current-Shunt Amplifier

The TLV2371ID can serve as the gain stage in a low-side current-shunt measurement circuit. Its 1 pA input bias current is favorable for the high-impedance side of a shunt network, while rail-to-rail input operation helps accommodate small differential signals near a 2.7 V supply. The 3 MHz bandwidth and 2.1 V/us slew rate are suitable for many monitoring and control loops, subject to the selected shunt resistance and amplifier gain. Engineers should apply the correct differential sign, use Kelvin routing for precision measurements, and verify output-headroom limits across the intended current range.

🖥️

Precision Analog Signal Buffer

The TLV2371ID can buffer a high-impedance analog source into a downstream ADC, filter, or comparator. Rail-to-rail input operation helps maintain signal fidelity when the source swings close to the 2.7 V lower supply limit, and the single-channel 8-pin SOIC keeps the circuit compact. The 3 MHz gain-bandwidth product provides useful bandwidth for moderate-frequency signals, while the 2.1 V/us slew rate helps the output follow step changes. Because the listed input offset voltage is 4.5 mV, applications requiring sub-millivolt absolute accuracy should include offset and drift in the error budget and consider a more precise amplifier.

🔧

Active Low-Pass Filter

The TLV2371ID is suitable for building an active low-pass filter in low-voltage instrumentation. Its 3 MHz gain-bandwidth product leaves useful closed-loop bandwidth for common first- and second-order filter stages, and the 550 µA quiescent current supports power-constrained designs. Rail-to-rail input and output characteristics are especially helpful when filtering signals that occupy much of a 2.7 V to 5 V supply range. Component tolerances and the op-amp's frequency response determine the achieved cutoff and Q. Place feedback components close to the device, provide local supply decoupling, and verify filter stability across temperature and process variation.

🏭

Industrial Control and Instrumentation

The TLV2371ID supports industrial control and instrumentation blocks that need a compact, general-purpose amplifier with extended industrial-temperature operation. The 16 V maximum recommended supply provides flexibility for 12 V and lower-voltage control systems, while the 2.7 V minimum supports modern embedded rails. Its 3 MHz bandwidth and 2.1 V/us slew rate are adequate for many sensor, interface, and signal-conditioning functions. For factory equipment, engineers should account for surge, grounding, noise, and component tolerances at the board level, and they should verify the exact temperature grade and lifecycle status before production release.

What is the operating voltage range of TLV2371ID?
The TLV2371ID operates from 2.7 V to 16 V as a single-supply operational amplifier. According to the Texas Instruments TLV2371 product page and datasheet, the minimum operating supply is 2.7 V over the extended industrial temperature range, while 16 V is the maximum recommended supply voltage. The 2.7 V lower limit makes the device suitable for 3.3 V systems, and the 16 V upper limit supports higher-voltage instrumentation when the design must retain a single-supply architecture.
What are the key specifications of TLV2371ID?
The TLV2371ID is a single rail-to-rail input and output operational amplifier with 3 MHz gain-bandwidth product, 2.1 V/us slew rate, and 550 µA quiescent current. Texas Instruments identifies the device as a 2.7 V minimum, 16 V maximum single-supply amplifier in an 8-pin SOIC package. Other highlighted characteristics include 1 pA input bias current, 4.5 mV input offset voltage, rail-to-rail signal handling, and a shutdown control. These parameters position it for low-voltage, low-power analog signal-conditioning circuits.
Where to download the TLV2371ID datasheet PDF?
The official TLV2371ID datasheet is available from the Texas Instruments TLV2371 product page at https://www.ti.com/product/TLV2371 and through the manufacturer datasheet link at https://www.ti.com/lit/gpn/TLV2371. The manufacturer datasheet is the authoritative source for the complete ordering table, electrical characteristics, pin configuration, typical performance curves, shutdown behavior, and recommended application circuits. Use that document when assigning pins or confirming operating limits before laying out the PCB.
Where can I find the TLV2371ID pinout?
The TLV2371ID uses an 8-pin SOIC package with a standard operational-amplifier arrangement: pin 1 is OUT, pin 2 is V−, pin 3 is the noninverting input, pin 4 is the inverting input, pin 5 is NC, pin 6 is the shutdown control, pin 7 is the positive supply, and pin 8 is OUT. Confirm the final connection assignments against the pin-description table in the Texas Instruments TLV2371 datasheet, particularly the shutdown pin because incorrect logic polarity can disable or interfere with normal operation.
Is TLV2371ID suitable for 3.3 V applications?
Yes, the TLV2371ID is suitable for a 3.3 V supply because its specified minimum operating voltage is 2.7 V. Its rail-to-rail input and output characteristics also help preserve signal range in low-voltage systems. Texas Instruments specifies a 3 MHz gain-bandwidth product and 2.1 V/us slew rate at this low-power operating point. Designers should still verify output-current requirements and signal amplitudes, particularly when driving loads close to either supply rail.
What is the power consumption of TLV2371ID?
The TLV2371ID draws 550 µA quiescent current per amplifier, according to the Texas Instruments product family documentation. Because the device is a single amplifier in an 8-pin SOIC, quiescent supply current is a useful first-order indicator of its idle power demand. Actual consumption increases with output activity and load current. Use the shutdown function when additional current reduction is required, and verify the shutdown polarity and operating behavior in the manufacturer datasheet.
TLV2371ID vs TLV2372ID: which is better for a single-stage amplifier?
The TLV2371ID is the better choice for a design requiring one amplifier because it is a single-channel device, whereas the TLV2372ID is a dual-channel device and provides two amplifiers in the family. Both belong to the Texas Instruments TLV237x rail-to-rail family and are associated with 3 MHz bandwidth and low-power operation. A dual amplifier can reduce package count when two independent gain stages are required, but it is not a pin-for-pin substitute for the single TLV2371ID in an existing 8-pin SOIC footprint.
When should I choose TLV2371ID over a dual TLV2372ID?
Choose the TLV2371ID when the design requires exactly one rail-to-rail operational amplifier and minimizing channel count is more important than packaging two amplifiers in one device. The TLV2371ID provides 3 MHz gain-bandwidth product, 2.1 V/us slew rate, and 550 µA quiescent current in an 8-pin SOIC. Choose a dual-family option instead only when two independent channels are needed and the surrounding circuit can be redesigned around its dual-channel pinout.
What can replace TLV2371ID?
The TLV2371IDG4 is a close same-package ordering option because it retains the 8-pin SOIC footprint and TLV2371 electrical configuration. The TLV2371IDR is another ordering option listed for the same 8-pin SOIC device. A replacement should not be selected from package similarity alone: verify shutdown polarity, supply limits, input bias current, offset voltage, bandwidth, slew rate, and the complete pin description. Confirm any new part against the current Texas Instruments datasheet before approving it for production.
Is TLV2371ID the same as TLV9151?
No, the TLV2371ID and TLV9151 should not be treated as identical solely because both are low-power operational amplifiers. Texas Instruments support discussions identify the TLV9151 as a possible replacement family member, but they also identify meaningful shutdown differences. A shutdown pin connected for one device may not operate correctly with the other. Before substitution, compare the complete pin functions, shutdown logic, operating voltage, bandwidth, slew rate, quiescent current, offset voltage, and package dimensions.
What is the best Texas Instruments equivalent for TLV2371ID?
The TLV2371IDG4 is the closest same-brand ordering option identified for the TLV2371ID because it preserves the 8-pin SOIC package and the TLV2371 amplifier configuration. It is suitable when the additional green ordering designation does not affect procurement requirements. Engineers must still check the ordering table for grade, temperature, and lifecycle details. The TLV2371IDR is another ordering representation of the same package, but it should not be selected merely for mechanical interchangeability.
Where to buy TLV2371ID online?
Use the Request a Quote form on this page to request TLV2371ID pricing, availability, lead time, and an appropriate quantity. The form is the preferred commercial channel for this listing and supports direct confirmation of the exact 8-pin SOIC ordering code. Engineers should state the required quantity, shipment destination, and whether reel or tube packaging is needed. Avoid accepting an order based only on the base family name because the TLV2371 family contains multiple channel counts and package options.
What is the price of TLV2371ID?
Request current TLV2371ID pricing through the Request a Quote form on this page. Commercial terms can depend on quantity, package format, production status, and delivery schedule, so the form provides the most appropriate route for a current quotation. When submitting the request, identify TLV2371ID explicitly and specify the required order quantity and tape-and-reel or other packaging preference. This ensures the quotation is tied to the exact 8-pin SOIC device rather than another member of the TLV237x family.
What is the lead time and stock status for TLV2371ID?
Request the current TLV2371ID stock status and lead time through the Request a Quote form on this page. The confirmation should cover the exact TLV2371ID ordering code, requested quantity, packaging format, and delivery destination. Lead time may change with order size and manufacturing conditions, so purchasing decisions should use the quotation response rather than a static availability statement. Do not substitute another TLV237x channel count when confirming supply for an existing design.
Is TLV2371ID in stock?
Use the Request a Quote form on this page to request the current TLV2371ID inventory position. The form can confirm availability for the requested quantity and packaging configuration, allowing procurement to plan around the actual order rather than a general family-level indication. Include the destination and required delivery date in the request. Engineers should also verify the lifecycle status and exact ordering suffix when the quotation is returned.
Is TLV2371ID RoHS compliant?
Yes, the TLV2371ID is identified as RoHS compliant in its component listing. The Texas Instruments product family also operates from 2.7 V to 16 V and supports extended industrial temperatures, while the orderable TLV2371ID configuration is supplied in an 8-pin SOIC package. RoHS status addresses restricted-substance requirements for the device; it does not by itself establish REACH, halogen-free, conflict-minerals, or automotive qualification status for the exact ordering code.

داده‌های مرجع مهندسی برای TLV2371ID — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the TLV2371ID for low-voltage, low-power analog signal conditioning requiring one rail-to-rail amplifier in an 8-pin SOIC package. Its 2.7 V minimum supply, 3 MHz bandwidth, 2.1 V/us slew rate, and 550 µA quiescent current are well matched to portable sensors, monitoring circuits, current-shunt amplifiers, and small active filters. The listed 4.5 mV offset voltage makes it more appropriate for moderate rather than precision millivolt-level measurements unless offset is calibrated or tolerated. TLV2371IDG4 and TLV2371IDR provide the same core device configuration and footprint, with ordering or packaging differences; choose them according to procurement and reel requirements. Do not substitute the TLV9151 family solely for its similar amplifier specifications because shutdown behavior differs. For designs requiring multiple amplifier channels, compare the complete dual or quad pinouts rather than treating them as drop-in replacements.

مقایسه با جایگزین‌ها

پارامتر این محصول TLV2371IDG4 TLV2371IDR
Brand Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Number of Channels 1 channel 1 channel 1 channel
Gain-Bandwidth Product 3 MHz 3 MHz 3 MHz
Slew Rate 2.1 V/us 2.1 V/us 2.1 V/us
Operating Supply Range 2.7 V to 16 V 2.7 V to 16 V 2.7 V to 16 V
Quiescent Current 550 µA per channel 550 µA per channel 550 µA per channel
Input Offset Voltage 4.5 mV 4.5 mV 4.5 mV
Input Bias Current 1 pA 1 pA 1 pA
Shutdown Control Yes Yes Yes

تفاوت‌های کلیدی

  • Combines rail-to-rail operation with low quiescent current (در مقابلTLV2371IDG4)
  • Operates across a broad single-supply range (در مقابلTLV2371IDR)
  • Single-channel 8-pin SOIC implementation (در مقابلTLV2371IDG4)

یادداشت‌های طراحی

Place a local bypass capacitor directly between the positive supply and ground pins, with the ground connection following the shortest practical return path. The TLV2371ID operates from 2.7 V to 16 V, but the bypass network should be sized for the supply impedance and expected switching noise rather than only for the 550 µA quiescent current. If the shutdown pin is not used, connect it to the inactive level shown in the manufacturer datasheet instead of allowing it to float.

Keep the feedback resistors, input source, and noninverting input connection close to the 8-pin SOIC to minimize parasitic capacitance and susceptibility to injected noise. For high-impedance sources, minimize copper area around pins 3 and 4, clean the board surface after soldering, and avoid running sensitive traces parallel to switching-current paths. A solid ground plane beneath the amplifier can reduce ground inductance, but it should not replace a deliberate return-current path to the supply capacitor.

Do not assume that rail-to-rail input and output operation eliminates all range restrictions near the supply rails. Review the common-mode and output-swing graphs in the Texas Instruments TLV2371 datasheet for the actual supply voltage, output load, and temperature. Also verify shutdown polarity before connecting system-control logic. A shutdown command with the wrong polarity can disable the amplifier or interfere with intended power management.

Use the 3 MHz gain-bandwidth product and 2.1 V/us slew rate to define the usable signal bandwidth rather than assuming the amplifier has uniform performance to 3 MHz. For filters or pulse-processing circuits, calculate the closed-loop response at each gain setting and compare it with the required waveform bandwidth. The listed 4.5 mV input offset voltage should also be included when small DC signals are measured at high gain.

اطلاعات انطباق

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The component listing identifies the TLV2371ID as RoHS compliant. No explicit exact-part qualification was found for REACH, AEC-Q100, lead-free status, halogen-free status, or conflict-minerals compliance.

تاریخ تأیید داده‌ها: 2026-11-19 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

TLV2371ID datasheet TLV2371ID datasheet pdf TLV2371ID pinout TLV2371ID equivalent TLV2371ID replacement TLV2371ID price TLV2371ID stock Texas Instruments TLV2371ID TLV2371 3MHz RRIO amplifier TLV2371ID 8-SOIC TLV2371ID sensor signal conditioning TLV2371ID vs TLV9151 TLV2371ID shutdown pin TLV2371ID low power op amp

قطعات و اصطلاحات مرتبط

Texas Instruments TLV2371ID TLV2371IDG4 TLV2371IDR TLV9151 operational amplifier rail-to-rail input rail-to-rail output single-supply amplifier analog signal-chain IC mixed-signal semiconductor gain-bandwidth product slew rate quiescent current input bias current input offset voltage shutdown control SOIC-8 surface-mount package sensor signal conditioning current-shunt measurement active low-pass filter battery-powered monitoring RoHS
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ