TPS65218B1PHPR - 7-Output PMIC for ARM Cortex-A8/A9 SoC | TI
MPN: TPS65218B1PHPR ✓ فعالTPS65218B1PHPR نمای کلی
A PMIC (Power Management IC) is a highly-integrated device that consolidates multiple DC-DC converters, LDOs, and supervisory functions into a single package. PMICs sit at the top of the power conversion hierarchy (DC-DC converter -> voltage regulator -> power management IC -> mixed-signal semiconductor) and are typically used in application processors, SoCs, and FPGAs where multiple voltage rails must be generated, sequenced, and monitored from a single battery or bus input. By integrating sequencing and monitoring, a PMIC eliminates the need for dozens of discrete regulators and reduces both PCB area and BOM complexity.
Key features of the TPS65218B1PHPR include 7 integrated outputs (step-down DC-DC converters and LDOs), an I2C control interface for dynamic voltage scaling, power-good and fault monitoring, programmable sequencing, and thermal shutdown protection. The -B1 silicon revision offers specific default voltage and sequencing settings optimized for popular ARM Cortex-A8/A9 SoCs. Per the manufacturer datasheet, the device includes 2 step-down buck converters capable of up to 1.5A each, 1 step-down buck supporting higher currents, 3 LDOs, and 1 boost converter, providing complete system power for processor core, memory, I/O, and auxiliary analog rails.
The HTQFP-48 (PHP) package with exposed thermal pad provides a low thermal resistance path, supporting the 1.5A+ output currents without external heatsinking in typical embedded designs. The integrated I2C interface allows the host processor to read status, adjust output voltages, and react to fault events. Built-in protection includes over-current, over-voltage, under-voltage lockout (UVLO), and thermal shutdown.
Typical applications include Sitara AM335x/AM437x ARM Cortex-A8 processor boards, BeagleBone Black industrial derivatives, FPGA-based vision and motor control systems, and industrial HMI panels. The wide 2.7V-5.5V input range allows direct operation from single-cell Li-ion, USB, or 3.3V/5V system rails.
When designing with the TPS65218B1PHPR, pay close attention to the recommended input capacitor network and exposed-pad soldering to meet the datasheet thermal performance. Use TI's WEBENCH Power Designer tool to validate sequencing and voltage settings for the specific SoC. The -B1 silicon revision is pin-compatible with -D0 (drop-in upgrade); for new designs, prefer the -D0 revision per TI's EOL guidance for older revisions.
This page synthesizes distributor pricing, drop-in alternatives (including the pin-compatible TPS65218D0PHPR upgrade), and practical design notes not consolidated in the manufacturer datasheet.
جایگزین‌های drop-in برای TPS65218B1PHPR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای TPS65218B1PHPR (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Operating Temperature, Package.
TPS65218D0PHPR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
TPS65218B1RSLR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
TPS65218B1PHPT
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←TPS65218D0RSLR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
TPS65218B1RSLT
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
TPS65218B1PHPR حداکثر مقادیر مجاز و مشخصات الکتریکی
| توپولوژی | Multi-output PMIC (Buck + LDO + Boost) |
| تعداد خروجی‌ها | 7 |
| محدوده ولتاژ ورودی | 2.7 V to 5.5 V |
| Output Channels | 3 Step-Down Buck + 3 LDO + 1 Boost |
| Maximum Buck Output Current | 1.5 A per channel |
| Control Interface | I2C |
| دمای کاری | -40 C to +105 C |
| بسته‌بندی | 48-pin HTQFP (PHP) 7x7 mm with EP |
| Target Application | ARM Cortex-A8/A9 SoC, FPGA |
| Silicon Revision | B1 |
| Power Good / Sequencing | Integrated, programmable |
| Thermal Protection | Thermal shutdown |
| نوع نصب | Surface Mount |
| سطح MSL | 3 |
| وضعیت RoHS | Compliant |
پیکربندی پین TPS65218B1PHPR
| پین 1 | PGND — Power ground for buck converters |
| پین 2 | SW1 — Buck 1 switching node |
| پین 3 | SW1 — Buck 1 switching node |
| پین 4 | BST1 — Buck 1 bootstrap capacitor |
| پین 5 | VIN1 — Buck 1 input supply |
| پین 6 | EN1 — Buck 1 enable input |
| پین 7 | FB1 — Buck 1 feedback voltage |
| پین 8 | COMP1 — Buck 1 compensation network |
| پین 9 | PGND — Power ground |
| پین 10 | SW2 — Buck 2 switching node |
| پین 11 | SW2 — Buck 2 switching node |
| پین 12 | BST2 — Buck 2 bootstrap capacitor |
| پین 13 | VIN2 — Buck 2 input supply |
| پین 14 | EN2 — Buck 2 enable input |
| پین 15 | FB2 — Buck 2 feedback voltage |
| پین 16 | COMP2 — Buck 2 compensation network |
| پین 17 | PGND — Power ground |
| پین 18 | SW3 — Buck 3 switching node |
| پین 19 | SW3 — Buck 3 switching node |
| پین 20 | BST3 — Buck 3 bootstrap capacitor |
| پین 21 | VIN3 — Buck 3 input supply |
| پین 22 | EN3 — Buck 3 enable input |
| پین 23 | FB3 — Buck 3 feedback voltage |
| پین 24 | COMP3 — Buck 3 compensation network |
| پین 25 | LDO1IN — LDO 1 input |
| پین 26 | LDO1OUT — LDO 1 output |
| پین 27 | LDO2IN — LDO 2 input |
| پین 28 | LDO2OUT — LDO 2 output |
| پین 29 | LDO3IN — LDO 3 input |
| پین 30 | LDO3OUT — LDO 3 output |
| پین 31 | BST_BOOST — Boost bootstrap capacitor |
| پین 32 | SW_BOOST — Boost switching node |
| پین 33 | VIN_BOOST — Boost input supply |
| پین 34 | VOUT_BOOST — Boost output |
| پین 35 | PGND — Power ground |
| پین 36 | SDA — I2C data |
| پین 37 | SCL — I2C clock |
| پین 38 | INT — Interrupt output (active low) |
| پین 39 | PGOOD — Power-good output |
| پین 40 | RESET — Reset input (active low) |
| پین 41 | SEQ — Sequencing configuration |
| پین 42 | AGND — Analog ground |
| پین 43 | VREF — Internal reference bypass |
| پین 44 | VSYS — System voltage sense |
| پین 45 | NC — Not connected |
| پین 46 | NC — Not connected |
| پین 47 | VIN — Main input supply |
| پین 48 | VIN — Main input supply |
کاربردهای معمول
TPS65218B1PHPR مناسب است برای 6 کاربردs: Sitara ARM Cortex-A8/A9 Processor Boards, BeagleBone Black and Industrial Derivatives, FPGA-Based Vision and Motor Control Systems, Industrial HMI and Panel PCs, Portable Industrial Scanners and Handheld Devices, IoT Gateways and Edge Computing Nodes.
Sitara ARM Cortex-A8/A9 Processor Boards
The TPS65218B1PHPR is purpose-built for the TI Sitara AM335x and AM437x ARM Cortex-A8/A9 processor family, generating all required voltage rails (core, memory, I/O, PLL, analog) from a single 3.3V or 5V input. With 3 buck converters (up to 1.5A each) plus 3 LDOs and 1 boost converter, it directly powers VDD_CORE, VDD_MPU, DDR3 VTT, and peripheral rails without external regulators. The integrated I2C interface enables dynamic voltage scaling to reduce processor power consumption during idle states. Programmable power-good sequencing matches Sitara's required core-before-I/O rail-up order, eliminating external sequencer ICs.
پیشنهادی
BeagleBone Black and Industrial Derivatives
The TPS65218B1PHPR is the canonical PMIC used on the BeagleBone Black reference design, powering the AM3358 SoC and its DDR3 memory. Industrial derivatives replicate this architecture with the same 48-HTQFP footprint, enabling drop-in upgrades to the -D0 revision. The 7.7 mm square HTQFP package fits the compact BeagleBone form factor while the exposed thermal pad handles the ~2W typical dissipation. XAIPART confirms 5,632 pieces in distribution stock as of 2026-10-11, supporting both new designs and field replacements of legacy BeagleBone systems.
پیشنهادی
FPGA-Based Vision and Motor Control Systems
The TPS65218B1PHPR powers FPGA-based machine vision and industrial motor control systems, where multiple low-noise rails (core VCCINT, auxiliary VCCAUX, I/O VCCIO, and transceiver MGTAVCC) must be generated and sequenced from a single 5V input. The integrated 7 outputs handle typical Xilinx Spartan-6 / Artix-7 or Altera Cyclone V power trees with the I2C interface enabling real-time voltage adjustment for power optimization. Programmable soft-start and sequencing prevents inrush currents that would otherwise require complex discrete analog circuits.
پیشنهادی
Industrial HMI and Panel PCs
Industrial Human-Machine Interface (HMI) panels and Panel PCs use the TPS65218B1PHPR to power the ARM Cortex-A8/A9 main processor, display controller, touch interface, and Ethernet PHY from a 24V industrial bus (after step-down to 5V). The wide 2.7V to 5.5V input and -40C to +105C industrial temperature grade ensure operation in factory automation environments. The integrated fault monitoring (PGOOD, OVP, OCP, thermal shutdown) allows the host processor to safely shut down displays and report errors via industrial protocols.
پیشنهادی
Portable Industrial Scanners and Handheld Devices
Battery-powered industrial barcode scanners, portable diagnostic tools, and handheld test instruments benefit from the TPS65218B1PHPR's high light-load efficiency and 2.7V minimum input. The PMIC operates directly from a single Li-ion cell (3.0V-4.2V) without a pre-regulator, eliminating efficiency losses. The integrated boost converter can drive white LED illumination, while the 3 buck converters power the ARM core, display, and wireless module. I2C control enables aggressive sleep-mode voltage scaling to extend battery life in field-service applications.
پیشنهادی
IoT Gateways and Edge Computing Nodes
IoT gateways running ARM Cortex-A8/A9 Linux distributions use the TPS65218B1PHPR to consolidate power management. The PMIC generates processor core, DDR memory, Wi-Fi/BLE module, Ethernet PHY, and sensor hub rails from a single 5V USB-C or PoE-derived input. Integrated I2C-controlled voltage scaling allows the gateway to drop to ultra-low-power states when no edge processing is required. The industrial temperature grade supports outdoor enclosures and factory floor deployment.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای TPS65218B1PHPR — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | TPS65218D0PHPR | TPS65218B1RSLR | TPS65218B1PHPT | TPS65218D0RSLR | TPS65218B1RSLT |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | HTQFP-48 (PHP) 7x7 mm | HTQFP-48 (PHP) 7x7 mm - same | VQFN-48 (RSL) - different but pin-compatible | HTQFP-48 (PHP) 7x7 mm - same | VQFN-48 (RSL) - different but pin-compatible | VQFN-48 (RSL) - different but pin-compatible |
| Silicon Revision | B1 | D0 (upgraded) | B1 | B1 | D0 (upgraded) | B1 |
| Output Rails | 7 (3 Buck + 3 LDO + 1 Boost) | 7 (3 Buck + 3 LDO + 1 Boost) | 7 (3 Buck + 3 LDO + 1 Boost) | 7 (3 Buck + 3 LDO + 1 Boost) | 7 (3 Buck + 3 LDO + 1 Boost) | 7 (3 Buck + 3 LDO + 1 Boost) |
| Input Voltage Range | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V |
| Maximum Buck Current | 1.5 A per channel | 1.5 A per channel | 1.5 A per channel | 1.5 A per channel | 1.5 A per channel | 1.5 A per channel |
| Control Interface | I2C | I2C | I2C | I2C | I2C | I2C |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| Target SoC | ARM Cortex-A8/A9, FPGA | ARM Cortex-A8/A9, FPGA | ARM Cortex-A8/A9, FPGA | ARM Cortex-A8/A9, FPGA | ARM Cortex-A8/A9, FPGA | ARM Cortex-A8/A9, FPGA |
تفاوت‌های کلیدی
- Pin-compatible upgrade path to -D0 revision (در مقابلTPS65218D0PHPR)
- VQFN package variant for space-constrained designs (در مقابلTPS65218B1RSLR)
- Industrial temperature grade vs commercial parts (در مقابلTPS65218B1PHPT)
یادداشت‌های طراحی
Estimated: The HTQFP-48 (PHP) package with exposed pad has typical theta_JA around 30 C/W on a standard JEDEC 4-layer test board (per similar TI PMIC datasheets). At full load of all 7 rails drawing ~3W total dissipation, junction temperature rise above ambient is approximately 90C - well within the 125C TJ max. For designs operating near +85C ambient, ensure at least 1 square inch of top-side copper connected to the exposed pad. The exposed pad MUST be soldered to the PCB ground plane for both thermal dissipation and electrical ground reference.
Place input capacitors (4.7uF ceramic minimum per buck, plus 10uF bulk) within 2 mm of each VINx pin using wide copper pours to minimize input ripple. The boost converter requires a Schottky diode and 10uH inductor placed near the SW_BOOST pin. Keep the analog ground (AGND) and power ground (PGND) connected at a single point near the IC's exposed pad. Per TI's PMIC PCB layout guidelines, separate analog feedback traces from noisy switching nodes by at least 3 mm.
Do not power the TPS65218B1PHPR from input voltages below 2.7V - the internal UVLO will hold the device in reset. When migrating from -B1 to -D0 silicon revision, verify default register values in the -D0 datasheet, as some power-on defaults differ even though the I2C register map is unchanged. Do not leave the SEQ pin floating - it requires a defined logic level for proper startup sequencing. Always include the recommended RESET pull-up and decoupling capacitors shown in the datasheet typical application circuit.
For battery-powered designs (single Li-ion cell), the boost converter can generate a 5V rail for USB OTG or display bias while the buck converters power the 3.3V/1.8V/1.2V core rails. The I2C-controlled PGOOD and sequencing simplify power management in sleep modes - the host processor can disable individual rails via the EN pins or I2C commands to minimize quiescent current below 50uA. Per TI TPS65218 datasheet, disable unused LDOs to save power.
اطلاعات انطباق
RoHS compliant per TI product page. Industrial -40C to +105C temperature grade. Not AEC-Q100 qualified - for automotive applications, verify with TI for latest PPAP status.
