Xilinx

XC4VLX15-11FFG676C - 13,824-Cell Virtex-4 LX FPGA | Xilinx

MPN: XC4VLX15-11FFG676C ✗ پایان تولید
1.2 V Vdss 676-pin FCBGA Package -11 Speed
حداقل سفارش: 1 |

XC4VLX15-11FFG676C نمای کلی

The Xilinx XC4VLX15-11FFG676C is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 320 I/O, and a 676-pin FCBGA package. Built on 90 nm CMOS technology and powered from 1.2 V, this FPGA combines programmable logic, block RAM, XtremeDSP multiply-accumulate resources, and dedicated I/O resources in a single high-performance device. The -11 speed designation and G package suffix identify a lead-free member of the Virtex-4 LX family.

A field-programmable gate array is a semiconductor whose digital logic and interconnections can be configured after fabrication. In the FPGA hierarchy, the XC4VLX15 belongs to the Virtex-4 LX family, a programmable-logic platform commonly used when designers need more flexibility than a fixed application-specific integrated circuit can provide. Its architecture supports parallel signal processing, protocol bridging, control, and data-processing functions within one configurable device.

The principal feature set includes 320 I/O, 13,824 logic cells, 18-bit by 18-bit multiplier blocks, cascadeable multiply and multiply-accumulate operations, and dedicated XtremeDSP slices operating up to 500 MHz. These resources make the device suitable for demanding parallel pipelines, digital signal processing, communications infrastructure, industrial control, and test equipment. Its 676-ball surface-mount package supports dense board layouts but requires careful via-in-pad and thermal design.

At the architectural level, the device combines dedicated DSP arithmetic with general-purpose programmable logic and block memory. An 18-bit by 18-bit multiplier can form the basis of multiply, multiply-accumulate, and complex multiply-add datapaths, while optional pipeline stages can support higher operating frequencies. This combination reduces the need to implement arithmetic operations entirely in fabric and can improve timing predictability in parallel processing architectures.

Typical applications include wireless and wired communications, industrial automation, video and image processing, instrumentation, and embedded control systems. The 320 available I/O can accommodate control signals, high-speed interfaces, memory connections, and external peripheral buses, while the DSP resources accelerate filtering, correlation, modulation, and other mathematically intensive operations.

PCB design requires a short, well-controlled power-distribution network, solid thermal paths through the 676-pin FCBGA, and clean routing between high-speed I/O and the FPGA core. The power, ground, and decoupling connections must follow the package and device guidance in the manufacturer datasheet, including layer-stack, via, and exposed-thermal-pad requirements.

This product page combines the exact device specifications, package details, lifecycle information, drop-in replacement candidates, and practical design guidance into one engineering reference. It also distinguishes speed-grade and temperature-grade options that use the same 676-pin FCBGA footprint, helping engineers select the correct device without assuming that every family member is functionally identical.

جایگزین‌های drop-in برای XC4VLX15-11FFG676C — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای XC4VLX15-11FFG676C (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Device Type, Package, Speed Grade.

AMD
Device Type: Virtex-4 LX field-programmable gate array (FPGA)
Package: 676-BBGA FCBGA
Speed Grade: -12
مقایسه با XC4VLX15-11FFG676C →

XC4VLX15-10FFG676C

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
AMD
📦 676-pin FCBGA
Virtex-4 LX Field-Programmable Gate Array · 13,824 logic cells · 1,536 CLBs · 320 I/O · 884,736 bits · 1.2 V · 90 nm CMOS · -10

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

XC4VLX15-12FFG676C

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
AMD
📦 676-pin FCBGA
Virtex-4 LX field-programmable gate array (FPGA) · 320 outputs · 676-BBGA FCBGA · 676 balls · -12 · AMD / Xilinx · Virtex-4 LX

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

XC4VLX15-11FFG676I

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
AMD
📦 676-pin FCBGA
Virtex-4 LX FPGA · 13,824 · 320 · 676-BBGA, FCBGA · 676-pin FCBGA · 90 nm CMOS · 1.2 V · -11

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

XC4VLX15-10FFG676I

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Xilinx
📦 676-pin FCBGA
Virtex-4 LX field-programmable gate array · 13,824 cells · 320 I/O · 90 nm · 1.2 V · -10 · Industrial · 676-BBGA FCBGA

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

XC4VLX15-12FFG676I

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 676-pin FCBGA
Speed grade changes from -11 to -12, an 8.3% higher grade designation, and the C suffix changes to I while the 676-pin FCBGA footprint remains unchanged.

📋 جایگزین مرجع (خارج از کاتالوگ)

XC4VLX15-11FFG676C حداکثر مقادیر مجاز و مشخصات الکتریکی

Device Type Virtex-4 LX Field-Programmable Gate Array
Logic Cells 13,824 cells
User I/O 320 I/O
بسته‌بندی 676-pin FCBGA
نوع نصب Surface mount
Process Technology 90 nm CMOS
Core Supply Voltage 1.2 V
Speed Grade -11
DSP Slice Maximum Frequency 500 MHz
Multiplier Width 18 bits x 18 bits
Multiplier Architecture Dedicated multiplier, multiply-accumulate, and multiply-adder blocks
DSP Pipeline Support Optional pipeline stages
DSP Accumulator Width Optional 48-bit accumulator
DSP Cascade Support Cascadeable multiply and multiply-accumulate operation
Lead-Free Status Lead free
وضعیت RoHS RoHS compliant
تعداد پایه 676 pins

راهنمای پیکربندی پین XC4VLX15-11FFG676C 676-pin fcbga

پیکربندی پین برای XC4VLX15-11FFG676C (پکیج 676-pin fcbga). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 676-pin fcbga برای XC4VLX15-11FFG676C

داده پین‌آوت تفصیلی موجود نیست برای XC4VLX15-11FFG676C.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

XC4VLX15-11FFG676C مناسب است برای 6 کاربردs: Wireless Communications Baseband, Industrial Automation and Control, Digital Signal Processing, Video and Image Processing, Test and Measurement Equipment, Embedded Communication Gateways.

🌐

Wireless Communications Baseband

The XC4VLX15-11FFG676C is well suited to parallel baseband processing because it combines 13,824 logic cells with dedicated 18-bit by 18-bit multipliers and DSP slices rated up to 500 MHz. Filtering, symbol correlation, carrier generation, and symbol-rate conversion can be distributed across pipelined datapaths instead of relying entirely on soft multipliers. The 320 I/O support interfaces to transceivers, converters, memory, and control logic. For a new design, timing should be evaluated with the -11 speed grade, configured I/O standards, and production timing constraints.

🏭

Industrial Automation and Control

The XC4VLX15-11FFG676C can consolidate machine-control logic, sensor conditioning interfaces, motion sequencing, and safety monitoring in one FPGA. Its 320 I/O provide substantial connectivity for encoders, programmable I/O, industrial communications, and actuator drivers, while the DSP resources accelerate measurement filters and signal transformations. The -11 grade targets higher internal timing performance than the -10 option. A robust industrial design should also confirm the selected temperature grade and implement deterministic clocking, watchdog behavior, and isolated communications outside the FPGA.

⚡

Digital Signal Processing

Dedicated XtremeDSP slices make the XC4VLX15-11FFG676C useful for filters, complex arithmetic, modulation, and high-throughput multiply-accumulate pipelines. Each dedicated multiplier supports 18-bit by 18-bit operands, optional 48-bit accumulation, and cascadeable operation, while optional pipeline stages can support improved throughput. The device's 13,824 logic cells can host control state machines, interfaces, and non-arithmetic datapaths. Final throughput and latency depend on the selected arithmetic mode, DSP placement, clocking scheme, and timing constraints rather than the 500 MHz headline figure alone.

📺

Video and Image Processing

The XC4VLX15-11FFG676C can support parallel pixel pipelines, thresholding, filtering, color processing, and image-region detection where deterministic latency is valuable. Its 320 I/O are suitable for high-speed parallel sensor interfaces, while the DSP blocks accelerate repeated multiplication operations common in filtering and correlation. The 676-pin FCBGA offers dense connectivity but demands careful ball-escape routing and a full power-and-ground plane structure. Video timing, color depth, external memory interface requirements, and supported I/O standards must be confirmed during architecture selection.

🧰

Test and Measurement Equipment

The XC4VLX15-11FFG676C is applicable to instrumentation requiring parallel acquisition, timing generation, pattern processing, and real-time control. Its programmable logic supports multiple bus formats and sequencing, while DSP blocks accelerate filtering, correlation, and numerical correction. The large I/O count simplifies parallel input/output organization, and the dedicated DSP resources reduce dependence on general-purpose fabric multipliers. For laboratory equipment, the design must address clock jitter, analog isolation, calibration, thermal drift, and deterministic I/O timing outside the programmable logic.

🔧

Embedded Communication Gateways

The XC4VLX15-11FFG676C can implement protocol termination, packet classification, buffering, encryption control, and traffic routing in a compact programmable platform. Its 13,824 logic cells allow substantial parallel protocol handling, while 320 I/O provide connections among PHYs, processors, memories, and management interfaces. The dedicated arithmetic resources are useful for checksum, filtering, and traffic-analysis functions. A production gateway should use a deterministic clock tree, validated configuration scheme, secure firmware process, and careful separation of I/O supplies from sensitive communication circuitry.

What are the key specifications of XC4VLX15-11FFG676C that engineers should know?
The XC4VLX15-11FFG676C is a Virtex-4 LX FPGA with 13,824 logic cells, 320 user I/O, and a 676-pin FCBGA package. It uses 90 nm CMOS technology with a 1.2 V core supply and includes dedicated 18-bit by 18-bit XtremeDSP multipliers capable of operating up to 500 MHz. According to the manufacturer datasheet, optional pipeline stages and a 48-bit accumulator support high-throughput multiply, multiply-accumulate, and complex arithmetic pipelines.
Where to download the XC4VLX15-11FFG676C datasheet PDF?
The XC4VLX15-11FFG676C datasheet PDF is available through the manufacturer datasheet link on this page and through the package pinout resources published for Virtex-4 devices. The datasheet defines the pinout, DC operating limits, configuration requirements, AC timing, and package information needed for schematic capture and PCB layout. Always match the exact G suffix and 676-pin FCBGA variant when assigning balls and power connections.
Where can I find the XC4VLX15-11FFG676C pinout and package information?
The XC4VLX15-11FFG676C pinout is defined in the manufacturer datasheet and the AMD/Xilinx Virtex-4 package pinout resources. The device uses a 676-pin FCBGA package with 320 user I/O. Use the package-specific ball assignment and power-separation tables rather than the pinout of a 668-ball version. A complete 676-ball transcription is not included on this page because the package drawing is not available in the package library.
Is the XC4VLX15-11FFG676C a lead-free and RoHS-compliant FPGA?
Yes, the XC4VLX15-11FFG676C is identified as lead-free and RoHS compliant. The G suffix denotes the lead-free ordering option for this device family. RoHS compliance addresses restricted substances in the finished component, while lead-free status specifically describes the termination and assembly-related material designation. Other environmental and process-compliance declarations should be confirmed against the current manufacturer product documentation.
What is the XC4VLX15-11FFG676C used for?
The XC4VLX15-11FFG676C is used for parallel digital logic and signal-processing designs requiring 13,824 logic cells and 320 I/O. Its dedicated 18-bit by 18-bit multipliers, optional pipeline stages, and 48-bit multiply-accumulate mode make it suitable for filtering, modulation, correlation, protocol processing, and industrial control. The large FCBGA also supports dense mixed-signal board layouts when careful power and thermal routing are applied.
How fast is the DSP logic in the XC4VLX15-11FFG676C?
The dedicated XtremeDSP slices in the XC4VLX15-11FFG676C operate at up to 500 MHz. This figure applies to the manufacturer-defined DSP operating conditions and does not guarantee that every fabric design or I/O interface can run at the same rate. According to the manufacturer datasheet, optional pipeline stages can improve throughput, while the final design frequency depends on logic placement, routing, timing constraints, and board implementation.
What is the difference between XC4VLX15-10FFG676C and XC4VLX15-11FFG676C?
The XC4VLX15-10FFG676C is the -10 speed grade, while the XC4VLX15-11FFG676C is the -11 speed grade; both use the same 676-pin FCBGA family and retain the 13,824-cell Virtex-4 LX configuration. The -11 part offers the higher speed designation, approximately 10% above the -10 grade in that numeric comparison. Pin compatibility therefore permits substitution, but timing closure and operating conditions must be reverified after replacement.
When should I choose XC4VLX15-11FFG676C instead of XC4VLX15-10FFG676C?
Choose XC4VLX15-11FFG676C when the design benefits from the -11 speed grade or when timing analysis is too close to the limit with the -10 grade. Both devices use the same 676-pin FCBGA architecture and offer the same 13,824 logic cells, so the principal decision is performance qualification. The -10 grade can remain preferable when it satisfies timing with lower speed grade requirements and validated tool support.
Can XC4VLX15-11FFG676C replace XC4VLX15-10FFG676C without changing the PCB?
Yes, the XC4VLX15-11FFG676C can physically replace the XC4VLX15-10FFG676C because both use the same 676-pin FCBGA footprint and Virtex-4 LX configuration. The replacement changes the speed grade from -10 to -11, which is generally favorable for timing but does not eliminate design verification. Confirm pinout, configuration behavior, power sequencing, temperature grade, and tool compatibility before approving the substitution.
What can replace XC4VLX15-11FFG676C?
The closest drop-in replacements are other speed-grade or temperature-grade variants of the XC4VLX15 in the 676-pin FCBGA configuration, including the -10 and -12 variants. These candidates retain the same device architecture, 13,824 logic cells, and physical footprint while changing speed or environmental qualification. No verified cross-brand drop-in equivalent was identified, so an alternative from another FPGA manufacturer may require different power, configuration, tooling, and board considerations.
Is there a cross-brand drop-in equivalent for XC4VLX15-11FFG676C?
No verified cross-brand drop-in equivalent was identified for the XC4VLX15-11FFG676C. A different FPGA family may offer similar logic resources, but it cannot be treated as a pin-compatible replacement without verifying the 676-ball footprint, power rails, configuration interface, I/O standards, memory interfaces, clocking, and migration support. Use the Request a Quote form on this page when sourcing the exact device or qualified same-footprint alternatives.
XC4VLX15-11FFG676C vs XC4VLX15-12FFG676C - which is better for timing-critical DSP?
The XC4VLX15-12FFG676C carries the higher -12 speed designation and is generally preferable when a design is timing constrained in the DSP or core-logic domain. The XC4VLX15-11FFG676C remains suitable when -11 performance satisfies the clock and I/O requirements. Both use the same 676-pin FCBGA footprint, but final selection must follow post-route timing analysis under the actual voltage, temperature, and speed conditions.
Where to buy XC4VLX15-11FFG676C online and what is its price?
Use the Request a Quote form on this page to request XC4VLX15-11FFG676C pricing, stock confirmation, and current lead time. The form is the appropriate channel for an obsolete or legacy FPGA where inventory and lifecycle conditions can change quickly. Quote requests should state the required quantity, package suffix, temperature grade, assembly requirements, and whether traceability or a manufacturer's authorized supply chain is required.
Is XC4VLX15-11FFG676C in stock and what is the lead time?
Current stock and lead time for the XC4VLX15-11FFG676C should be confirmed through the Request a Quote form on this page. Because this is a mature Virtex-4 device, supply may depend on remaining factory inventory, authorized-channel availability, and traceability requirements. Submit the exact MPN and required quantity so the response can reflect the correct 676-pin FCBGA variant rather than another suffix or temperature grade.
How does the XC4VLX15-11FFG676C compare with XC4VLX15-11FFG668C?
The XC4VLX15-11FFG676C uses a 676-pin FCBGA, while the XC4VLX15-11FFG668C uses a smaller 668-pin FCBGA. They are not direct drop-in alternatives because the ball count and board footprint differ, even though both belong to the XC4VLX15 family and provide the same 13,824 logic cells. Conversion requires a full PCB and pinout review, including I/O availability, power connections, escape routing, and package thermal design.

داده‌های مرجع مهندسی برای XC4VLX15-11FFG676C — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the XC4VLX15-11FFG676C when the design requires the -11 Virtex-4 LX speed grade, the commercial C temperature suffix, 13,824 logic cells, 320 I/O, and a 676-pin FCBGA footprint. Select XC4VLX15-10FFG676C when the -10 timing margin is sufficient and a lower speed grade is acceptable. Select XC4VLX15-12FFG676C when additional timing margin is valuable, although the device must still pass complete timing verification. The I-suffix variants are appropriate when industrial environmental qualification is required, but their exact operating-temperature limits must be confirmed before substitution. None of these options should be treated as interchangeable with the 668-ball XC4VLX15 variants because the package geometry and ball assignments differ.

مقایسه با جایگزین‌ها

پارامتر این محصول XC4VLX15-10FFG676C XC4VLX15-12FFG676C XC4VLX15-11FFG676I XC4VLX15-10FFG676I XC4VLX15-12FFG676I
Brand Xilinx Xilinx Xilinx Xilinx Xilinx Xilinx
Package 676-pin FCBGA 676-pin FCBGA 676-pin FCBGA 676-pin FCBGA 676-pin FCBGA 676-pin FCBGA
Speed Grade -11 -10 -12 -11 -10 -12
Temperature-Grade Suffix C C C I I I
Logic Cells 13,824 cells 13,824 cells 13,824 cells 13,824 cells 13,824 cells 13,824 cells
User I/O 320 I/O 320 I/O 320 I/O 320 I/O 320 I/O 320 I/O
Process Technology 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS
Multiplier Format 18 bits x 18 bits 18 bits x 18 bits 18 bits x 18 bits 18 bits x 18 bits 18 bits x 18 bits 18 bits x 18 bits
Core Supply Voltage 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V

تفاوت‌های کلیدی

  • Higher speed grade within the same drop-in footprint (در مقابلXC4VLX15-10FFG676C)
  • FPGA and DSP resources combined in one programmable device (در مقابلXC4VLX15-10FFG676I)
  • Alternative speed option without requiring a larger package (در مقابلXC4VLX15-12FFG676C)
  • Same footprint and logic capacity across industrial-grade variants (در مقابلXC4VLX15-12FFG676I)

یادداشت‌های طراحی

A 676-pin FCBGA concentrates both power dissipation and mechanical stress in a small area. Provide a continuous power-and-ground plane arrangement, adequate layer count, and numerous thermal vias directly beneath the device according to the manufacturer package guidance. Monitor junction temperature during worst-case clock, I/O, and DSP activity rather than relying only on ambient temperature. Avoid placing heat-generating components immediately beneath the FPGA because the exposed package path is a primary route for removing heat.

Separate core, auxiliary, and I/O supply requirements in the schematic and preserve the manufacturer-defined sequencing relationships. Keep the 1.2 V core rail and I/O rails on appropriately filtered, low-impedance planes, with decoupling placed directly at the relevant package balls. Validate ripple and transient response under maximum clock activity and high-speed I/O toggling. Incorrect supply partitioning or inadequate decoupling can corrupt configuration and create timing failures that appear unrelated to the original design.

Use the exact 676-pin FCBGA escape-routing geometry and differential-pair rules defined for this device. Do not substitute the 668-ball layout: the two packages have different ball counts and assignments. Keep high-speed I/O traces short, use appropriate reference-plane continuity, and place termination, biasing, and decoupling components near their associated balls. Run fabrication and assembly checks for via-in-pad design, solder-mask definition, thermal-via tenting, and component placement tolerances.

Clock quality and return paths are central to reliable operation of a device with dedicated DSP slices capable of operating up to 500 MHz. Use low-jitter clock sources, provide clean clock-power distribution, and maintain a continuous reference plane beneath routed interfaces. Check source-synchronous and chip-to-chip interfaces with board-level simulation when edge rates are high. Isolate noisy external connectors and switching power stages from sensitive clock, configuration, and DSP routing where the enclosure permits.

Do not treat the -10, -11, and -12 suffix changes as transparent for certification. Although the listed alternatives retain the 676-pin FCBGA footprint, speed and temperature-grade changes can alter timing margins, environmental qualification, and lifecycle planning. Re-run synthesis or implementation, static timing analysis, bitstream generation, and board validation after every substitution. Also verify that the configuration memory interface, pin constraints, and design tools remain supported for the selected exact suffix.

اطلاعات انطباق

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Yes
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The device is identified as lead-free and RoHS compliant. REACH, halogen-free, and conflict-minerals declarations were not identified in the available manufacturer or distributor information.

تاریخ تأیید داده‌ها: 2026-11-18 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

xc4vlx15 10sfg363c XC4VLX15-11FFG676C datasheet XC4VLX15-11FFG676C pinout XC4VLX15-11FFG676C datasheet pdf XC4VLX15-11FFG676C equivalent XC4VLX15-11FFG676C replacement XC4VLX15-11FFG676C footprint XC4VLX15-11FFG676C price XC4VLX15-11FFG676C stock Xilinx XC4VLX15-11FFG676C XC4VLX15 676 FCBGA pinout XC4VLX15-11FFG676C vs XC4VLX15-12FFG676C XC4VLX15-11FFG676C DSP application circuit Virtex-4 LX 13824 logic cells 676-pin FCBGA FPGA 320 I/O

قطعات و اصطلاحات مرتبط

Xilinx AMD XC4VLX15-11FFG676C XC4VLX15-10FFG676C XC4VLX15-12FFG676C XC4VLX15-11FFG676I XC4VLX15-10FFG676I XC4VLX15-12FFG676I Virtex-4 LX field-programmable gate array FPGA programmable logic XtremeDSP slice 18-bit by 18-bit multiplier multiply-accumulate block RAM 676-pin FCBGA FCBGA package family surface-mount package 90 nm CMOS 1.2 V core supply 500 MHz DSP RoHS lead-free industrial control digital signal processing
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ