XC4VLX15-11FFG676C - 13,824-Cell Virtex-4 LX FPGA | Xilinx
Référence : XC4VLX15-11FFG676C ✗ Fin de vieXC4VLX15-11FFG676C Présentation
A field-programmable gate array is a semiconductor whose digital logic and interconnections can be configured after fabrication. In the FPGA hierarchy, the XC4VLX15 belongs to the Virtex-4 LX family, a programmable-logic platform commonly used when designers need more flexibility than a fixed application-specific integrated circuit can provide. Its architecture supports parallel signal processing, protocol bridging, control, and data-processing functions within one configurable device.
The principal feature set includes 320 I/O, 13,824 logic cells, 18-bit by 18-bit multiplier blocks, cascadeable multiply and multiply-accumulate operations, and dedicated XtremeDSP slices operating up to 500 MHz. These resources make the device suitable for demanding parallel pipelines, digital signal processing, communications infrastructure, industrial control, and test equipment. Its 676-ball surface-mount package supports dense board layouts but requires careful via-in-pad and thermal design.
At the architectural level, the device combines dedicated DSP arithmetic with general-purpose programmable logic and block memory. An 18-bit by 18-bit multiplier can form the basis of multiply, multiply-accumulate, and complex multiply-add datapaths, while optional pipeline stages can support higher operating frequencies. This combination reduces the need to implement arithmetic operations entirely in fabric and can improve timing predictability in parallel processing architectures.
Typical applications include wireless and wired communications, industrial automation, video and image processing, instrumentation, and embedded control systems. The 320 available I/O can accommodate control signals, high-speed interfaces, memory connections, and external peripheral buses, while the DSP resources accelerate filtering, correlation, modulation, and other mathematically intensive operations.
PCB design requires a short, well-controlled power-distribution network, solid thermal paths through the 676-pin FCBGA, and clean routing between high-speed I/O and the FPGA core. The power, ground, and decoupling connections must follow the package and device guidance in the manufacturer datasheet, including layer-stack, via, and exposed-thermal-pad requirements.
This product page combines the exact device specifications, package details, lifecycle information, drop-in replacement candidates, and practical design guidance into one engineering reference. It also distinguishes speed-grade and temperature-grade options that use the same 676-pin FCBGA footprint, helping engineers select the correct device without assuming that every family member is functionally identical.
Alternatives de remplacement direct pour XC4VLX15-11FFG676C — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XC4VLX15-11FFG676C (même facteur de forme et même empreinte) — différant par Device Type, Package, Speed Grade.
XC4VLX15-10FFG676C
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →XC4VLX15-12FFG676C
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →XC4VLX15-11FFG676I
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →XC4VLX15-10FFG676I
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →XC4VLX15-12FFG676I
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XC4VLX15-11FFG676C Valeurs maximales et caractéristiques électriques
| Device Type | Virtex-4 LX Field-Programmable Gate Array |
| Logic Cells | 13,824 cells |
| User I/O | 320 I/O |
| Boîtier | 676-pin FCBGA |
| Type de montage | Surface mount |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -11 |
| DSP Slice Maximum Frequency | 500 MHz |
| Multiplier Width | 18 bits x 18 bits |
| Multiplier Architecture | Dedicated multiplier, multiply-accumulate, and multiply-adder blocks |
| DSP Pipeline Support | Optional pipeline stages |
| DSP Accumulator Width | Optional 48-bit accumulator |
| DSP Cascade Support | Cascadeable multiply and multiply-accumulate operation |
| Lead-Free Status | Lead free |
| Statut RoHS | RoHS compliant |
| Nombre de broches | 676 pins |
Guide de configuration des broches du XC4VLX15-11FFG676C 676-pin fcbga
Configuration des broches du XC4VLX15-11FFG676C (boîtier 676-pin fcbga). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC4VLX15-11FFG676C.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC4VLX15-11FFG676C convient pour 6 applications: Wireless Communications Baseband, Industrial Automation and Control, Digital Signal Processing, Video and Image Processing, Test and Measurement Equipment, Embedded Communication Gateways.
Wireless Communications Baseband
The XC4VLX15-11FFG676C is well suited to parallel baseband processing because it combines 13,824 logic cells with dedicated 18-bit by 18-bit multipliers and DSP slices rated up to 500 MHz. Filtering, symbol correlation, carrier generation, and symbol-rate conversion can be distributed across pipelined datapaths instead of relying entirely on soft multipliers. The 320 I/O support interfaces to transceivers, converters, memory, and control logic. For a new design, timing should be evaluated with the -11 speed grade, configured I/O standards, and production timing constraints.
Recommandé
Industrial Automation and Control
The XC4VLX15-11FFG676C can consolidate machine-control logic, sensor conditioning interfaces, motion sequencing, and safety monitoring in one FPGA. Its 320 I/O provide substantial connectivity for encoders, programmable I/O, industrial communications, and actuator drivers, while the DSP resources accelerate measurement filters and signal transformations. The -11 grade targets higher internal timing performance than the -10 option. A robust industrial design should also confirm the selected temperature grade and implement deterministic clocking, watchdog behavior, and isolated communications outside the FPGA.
Recommandé
Digital Signal Processing
Dedicated XtremeDSP slices make the XC4VLX15-11FFG676C useful for filters, complex arithmetic, modulation, and high-throughput multiply-accumulate pipelines. Each dedicated multiplier supports 18-bit by 18-bit operands, optional 48-bit accumulation, and cascadeable operation, while optional pipeline stages can support improved throughput. The device's 13,824 logic cells can host control state machines, interfaces, and non-arithmetic datapaths. Final throughput and latency depend on the selected arithmetic mode, DSP placement, clocking scheme, and timing constraints rather than the 500 MHz headline figure alone.
Recommandé
Video and Image Processing
The XC4VLX15-11FFG676C can support parallel pixel pipelines, thresholding, filtering, color processing, and image-region detection where deterministic latency is valuable. Its 320 I/O are suitable for high-speed parallel sensor interfaces, while the DSP blocks accelerate repeated multiplication operations common in filtering and correlation. The 676-pin FCBGA offers dense connectivity but demands careful ball-escape routing and a full power-and-ground plane structure. Video timing, color depth, external memory interface requirements, and supported I/O standards must be confirmed during architecture selection.
Recommandé
Test and Measurement Equipment
The XC4VLX15-11FFG676C is applicable to instrumentation requiring parallel acquisition, timing generation, pattern processing, and real-time control. Its programmable logic supports multiple bus formats and sequencing, while DSP blocks accelerate filtering, correlation, and numerical correction. The large I/O count simplifies parallel input/output organization, and the dedicated DSP resources reduce dependence on general-purpose fabric multipliers. For laboratory equipment, the design must address clock jitter, analog isolation, calibration, thermal drift, and deterministic I/O timing outside the programmable logic.
Recommandé
Embedded Communication Gateways
The XC4VLX15-11FFG676C can implement protocol termination, packet classification, buffering, encryption control, and traffic routing in a compact programmable platform. Its 13,824 logic cells allow substantial parallel protocol handling, while 320 I/O provide connections among PHYs, processors, memories, and management interfaces. The dedicated arithmetic resources are useful for checksum, filtering, and traffic-analysis functions. A production gateway should use a deterministic clock tree, validated configuration scheme, secure firmware process, and careful separation of I/O supplies from sensitive communication circuitry.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC4VLX15-11FFG676C — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC4VLX15-10FFG676C | XC4VLX15-12FFG676C | XC4VLX15-11FFG676I | XC4VLX15-10FFG676I | XC4VLX15-12FFG676I |
|---|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA |
| Speed Grade | -11 | -10 | -12 | -11 | -10 | -12 |
| Temperature-Grade Suffix | C | C | C | I | I | I |
| Logic Cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells |
| User I/O | 320 I/O | 320 I/O | 320 I/O | 320 I/O | 320 I/O | 320 I/O |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Multiplier Format | 18 bits x 18 bits | 18 bits x 18 bits | 18 bits x 18 bits | 18 bits x 18 bits | 18 bits x 18 bits | 18 bits x 18 bits |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
Principaux différenciateurs
- Higher speed grade within the same drop-in footprint (vs XC4VLX15-10FFG676C)
- FPGA and DSP resources combined in one programmable device (vs XC4VLX15-10FFG676I)
- Alternative speed option without requiring a larger package (vs XC4VLX15-12FFG676C)
- Same footprint and logic capacity across industrial-grade variants (vs XC4VLX15-12FFG676I)
Notes de conception
A 676-pin FCBGA concentrates both power dissipation and mechanical stress in a small area. Provide a continuous power-and-ground plane arrangement, adequate layer count, and numerous thermal vias directly beneath the device according to the manufacturer package guidance. Monitor junction temperature during worst-case clock, I/O, and DSP activity rather than relying only on ambient temperature. Avoid placing heat-generating components immediately beneath the FPGA because the exposed package path is a primary route for removing heat.
Separate core, auxiliary, and I/O supply requirements in the schematic and preserve the manufacturer-defined sequencing relationships. Keep the 1.2 V core rail and I/O rails on appropriately filtered, low-impedance planes, with decoupling placed directly at the relevant package balls. Validate ripple and transient response under maximum clock activity and high-speed I/O toggling. Incorrect supply partitioning or inadequate decoupling can corrupt configuration and create timing failures that appear unrelated to the original design.
Use the exact 676-pin FCBGA escape-routing geometry and differential-pair rules defined for this device. Do not substitute the 668-ball layout: the two packages have different ball counts and assignments. Keep high-speed I/O traces short, use appropriate reference-plane continuity, and place termination, biasing, and decoupling components near their associated balls. Run fabrication and assembly checks for via-in-pad design, solder-mask definition, thermal-via tenting, and component placement tolerances.
Clock quality and return paths are central to reliable operation of a device with dedicated DSP slices capable of operating up to 500 MHz. Use low-jitter clock sources, provide clean clock-power distribution, and maintain a continuous reference plane beneath routed interfaces. Check source-synchronous and chip-to-chip interfaces with board-level simulation when edge rates are high. Isolate noisy external connectors and switching power stages from sensitive clock, configuration, and DSP routing where the enclosure permits.
Do not treat the -10, -11, and -12 suffix changes as transparent for certification. Although the listed alternatives retain the 676-pin FCBGA footprint, speed and temperature-grade changes can alter timing margins, environmental qualification, and lifecycle planning. Re-run synthesis or implementation, static timing analysis, bitstream generation, and board validation after every substitution. Also verify that the configuration memory interface, pin constraints, and design tools remain supported for the selected exact suffix.
Informations de conformité
The device is identified as lead-free and RoHS compliant. REACH, halogen-free, and conflict-minerals declarations were not identified in the available manufacturer or distributor information.