XC4VLX15-11FFG676C - 13,824-Cell Virtex-4 LX FPGA | Xilinx
부품 번호: XC4VLX15-11FFG676C ✗ 단종XC4VLX15-11FFG676C 개요
A field-programmable gate array is a semiconductor whose digital logic and interconnections can be configured after fabrication. In the FPGA hierarchy, the XC4VLX15 belongs to the Virtex-4 LX family, a programmable-logic platform commonly used when designers need more flexibility than a fixed application-specific integrated circuit can provide. Its architecture supports parallel signal processing, protocol bridging, control, and data-processing functions within one configurable device.
The principal feature set includes 320 I/O, 13,824 logic cells, 18-bit by 18-bit multiplier blocks, cascadeable multiply and multiply-accumulate operations, and dedicated XtremeDSP slices operating up to 500 MHz. These resources make the device suitable for demanding parallel pipelines, digital signal processing, communications infrastructure, industrial control, and test equipment. Its 676-ball surface-mount package supports dense board layouts but requires careful via-in-pad and thermal design.
At the architectural level, the device combines dedicated DSP arithmetic with general-purpose programmable logic and block memory. An 18-bit by 18-bit multiplier can form the basis of multiply, multiply-accumulate, and complex multiply-add datapaths, while optional pipeline stages can support higher operating frequencies. This combination reduces the need to implement arithmetic operations entirely in fabric and can improve timing predictability in parallel processing architectures.
Typical applications include wireless and wired communications, industrial automation, video and image processing, instrumentation, and embedded control systems. The 320 available I/O can accommodate control signals, high-speed interfaces, memory connections, and external peripheral buses, while the DSP resources accelerate filtering, correlation, modulation, and other mathematically intensive operations.
PCB design requires a short, well-controlled power-distribution network, solid thermal paths through the 676-pin FCBGA, and clean routing between high-speed I/O and the FPGA core. The power, ground, and decoupling connections must follow the package and device guidance in the manufacturer datasheet, including layer-stack, via, and exposed-thermal-pad requirements.
This product page combines the exact device specifications, package details, lifecycle information, drop-in replacement candidates, and practical design guidance into one engineering reference. It also distinguishes speed-grade and temperature-grade options that use the same 676-pin FCBGA footprint, helping engineers select the correct device without assuming that every family member is functionally identical.
드롭인 대체품: XC4VLX15-11FFG676C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC4VLX15-11FFG676C (동일 폼 팩터 및 풋프린트) — 차이점: Device Type, Package, Speed Grade.
XC4VLX15-10FFG676C
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XC4VLX15-12FFG676C
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XC4VLX15-11FFG676I
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XC4VLX15-10FFG676I
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XC4VLX15-12FFG676I
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC4VLX15-11FFG676C 최대 정격 & 전기적 특성
| Device Type | Virtex-4 LX Field-Programmable Gate Array |
| Logic Cells | 13,824 cells |
| User I/O | 320 I/O |
| 패키지 | 676-pin FCBGA |
| 실장 유형 | Surface mount |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -11 |
| DSP Slice Maximum Frequency | 500 MHz |
| Multiplier Width | 18 bits x 18 bits |
| Multiplier Architecture | Dedicated multiplier, multiply-accumulate, and multiply-adder blocks |
| DSP Pipeline Support | Optional pipeline stages |
| DSP Accumulator Width | Optional 48-bit accumulator |
| DSP Cascade Support | Cascadeable multiply and multiply-accumulate operation |
| Lead-Free Status | Lead free |
| RoHS 상태 | RoHS compliant |
| 핀 수 | 676 pins |
XC4VLX15-11FFG676C 676-pin fcbga 핀 구성 가이드
XC4VLX15-11FFG676C(676-pin fcbga 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC4VLX15-11FFG676C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC4VLX15-11FFG676C 적합 용도: 6 애플리케이션s: Wireless Communications Baseband, Industrial Automation and Control, Digital Signal Processing, Video and Image Processing, Test and Measurement Equipment, Embedded Communication Gateways.
Wireless Communications Baseband
The XC4VLX15-11FFG676C is well suited to parallel baseband processing because it combines 13,824 logic cells with dedicated 18-bit by 18-bit multipliers and DSP slices rated up to 500 MHz. Filtering, symbol correlation, carrier generation, and symbol-rate conversion can be distributed across pipelined datapaths instead of relying entirely on soft multipliers. The 320 I/O support interfaces to transceivers, converters, memory, and control logic. For a new design, timing should be evaluated with the -11 speed grade, configured I/O standards, and production timing constraints.
추천
Industrial Automation and Control
The XC4VLX15-11FFG676C can consolidate machine-control logic, sensor conditioning interfaces, motion sequencing, and safety monitoring in one FPGA. Its 320 I/O provide substantial connectivity for encoders, programmable I/O, industrial communications, and actuator drivers, while the DSP resources accelerate measurement filters and signal transformations. The -11 grade targets higher internal timing performance than the -10 option. A robust industrial design should also confirm the selected temperature grade and implement deterministic clocking, watchdog behavior, and isolated communications outside the FPGA.
추천
Digital Signal Processing
Dedicated XtremeDSP slices make the XC4VLX15-11FFG676C useful for filters, complex arithmetic, modulation, and high-throughput multiply-accumulate pipelines. Each dedicated multiplier supports 18-bit by 18-bit operands, optional 48-bit accumulation, and cascadeable operation, while optional pipeline stages can support improved throughput. The device's 13,824 logic cells can host control state machines, interfaces, and non-arithmetic datapaths. Final throughput and latency depend on the selected arithmetic mode, DSP placement, clocking scheme, and timing constraints rather than the 500 MHz headline figure alone.
추천
Video and Image Processing
The XC4VLX15-11FFG676C can support parallel pixel pipelines, thresholding, filtering, color processing, and image-region detection where deterministic latency is valuable. Its 320 I/O are suitable for high-speed parallel sensor interfaces, while the DSP blocks accelerate repeated multiplication operations common in filtering and correlation. The 676-pin FCBGA offers dense connectivity but demands careful ball-escape routing and a full power-and-ground plane structure. Video timing, color depth, external memory interface requirements, and supported I/O standards must be confirmed during architecture selection.
추천
Test and Measurement Equipment
The XC4VLX15-11FFG676C is applicable to instrumentation requiring parallel acquisition, timing generation, pattern processing, and real-time control. Its programmable logic supports multiple bus formats and sequencing, while DSP blocks accelerate filtering, correlation, and numerical correction. The large I/O count simplifies parallel input/output organization, and the dedicated DSP resources reduce dependence on general-purpose fabric multipliers. For laboratory equipment, the design must address clock jitter, analog isolation, calibration, thermal drift, and deterministic I/O timing outside the programmable logic.
추천
Embedded Communication Gateways
The XC4VLX15-11FFG676C can implement protocol termination, packet classification, buffering, encryption control, and traffic routing in a compact programmable platform. Its 13,824 logic cells allow substantial parallel protocol handling, while 320 I/O provide connections among PHYs, processors, memories, and management interfaces. The dedicated arithmetic resources are useful for checksum, filtering, and traffic-analysis functions. A production gateway should use a deterministic clock tree, validated configuration scheme, secure firmware process, and careful separation of I/O supplies from sensitive communication circuitry.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC4VLX15-11FFG676C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC4VLX15-10FFG676C | XC4VLX15-12FFG676C | XC4VLX15-11FFG676I | XC4VLX15-10FFG676I | XC4VLX15-12FFG676I |
|---|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA |
| Speed Grade | -11 | -10 | -12 | -11 | -10 | -12 |
| Temperature-Grade Suffix | C | C | C | I | I | I |
| Logic Cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells |
| User I/O | 320 I/O | 320 I/O | 320 I/O | 320 I/O | 320 I/O | 320 I/O |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Multiplier Format | 18 bits x 18 bits | 18 bits x 18 bits | 18 bits x 18 bits | 18 bits x 18 bits | 18 bits x 18 bits | 18 bits x 18 bits |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
주요 차별점
- Higher speed grade within the same drop-in footprint (vs XC4VLX15-10FFG676C)
- FPGA and DSP resources combined in one programmable device (vs XC4VLX15-10FFG676I)
- Alternative speed option without requiring a larger package (vs XC4VLX15-12FFG676C)
- Same footprint and logic capacity across industrial-grade variants (vs XC4VLX15-12FFG676I)
설계 노트
A 676-pin FCBGA concentrates both power dissipation and mechanical stress in a small area. Provide a continuous power-and-ground plane arrangement, adequate layer count, and numerous thermal vias directly beneath the device according to the manufacturer package guidance. Monitor junction temperature during worst-case clock, I/O, and DSP activity rather than relying only on ambient temperature. Avoid placing heat-generating components immediately beneath the FPGA because the exposed package path is a primary route for removing heat.
Separate core, auxiliary, and I/O supply requirements in the schematic and preserve the manufacturer-defined sequencing relationships. Keep the 1.2 V core rail and I/O rails on appropriately filtered, low-impedance planes, with decoupling placed directly at the relevant package balls. Validate ripple and transient response under maximum clock activity and high-speed I/O toggling. Incorrect supply partitioning or inadequate decoupling can corrupt configuration and create timing failures that appear unrelated to the original design.
Use the exact 676-pin FCBGA escape-routing geometry and differential-pair rules defined for this device. Do not substitute the 668-ball layout: the two packages have different ball counts and assignments. Keep high-speed I/O traces short, use appropriate reference-plane continuity, and place termination, biasing, and decoupling components near their associated balls. Run fabrication and assembly checks for via-in-pad design, solder-mask definition, thermal-via tenting, and component placement tolerances.
Clock quality and return paths are central to reliable operation of a device with dedicated DSP slices capable of operating up to 500 MHz. Use low-jitter clock sources, provide clean clock-power distribution, and maintain a continuous reference plane beneath routed interfaces. Check source-synchronous and chip-to-chip interfaces with board-level simulation when edge rates are high. Isolate noisy external connectors and switching power stages from sensitive clock, configuration, and DSP routing where the enclosure permits.
Do not treat the -10, -11, and -12 suffix changes as transparent for certification. Although the listed alternatives retain the 676-pin FCBGA footprint, speed and temperature-grade changes can alter timing margins, environmental qualification, and lifecycle planning. Re-run synthesis or implementation, static timing analysis, bitstream generation, and board validation after every substitution. Also verify that the configuration memory interface, pin constraints, and design tools remain supported for the selected exact suffix.
규정 준수 정보
The device is identified as lead-free and RoHS compliant. REACH, halogen-free, and conflict-minerals declarations were not identified in the available manufacturer or distributor information.