XC7Z020-L1CLG484I - 667MHz Zynq SoC with 85K Cells | AMD
MPN: XC7Z020-L1CLG484I ✓ فعالXC7Z020-L1CLG484I نمای کلی
A Zynq-7000 SoC belongs to the FPGA and programmable-logic hierarchy while integrating a hard microcontroller system directly into the same silicon device. Unlike a conventional microcontroller paired with a separate FPGA, the Zynq architecture combines a dual-core ARM Cortex-A9 processing system, programmable Artix-7 logic, dedicated memory interfaces, high-speed serial transceivers, and integrated controllers. This allows software-controlled data processing and hardware-accelerated logic to operate within one device while sharing package-level resources.
The most prominent device characteristics are the 667 MHz dual-core ARM Cortex-A9 processor, 85K FPGA logic cells, and 484-CSPBGA package. The Artix-7 programmable logic section supports parallel interface, control, video, protocol, and data-processing functions, while the ARM processor side runs operating-system-level software. The 484-CSPBGA package provides a dense, high-speed interconnect platform suitable for demanding embedded and industrial systems.
The XC7Z020 device family is based on 28 nm Xilinx programmable-logic technology. Its heterogeneous architecture allows Linux, embedded real-time software, or bare-metal firmware to control programmable hardware accelerators without exchanging data across a separate chip-to-chip package boundary. This topology reduces system-level component count and can shorten data paths between software and FPGA logic. CoreSight support also provides integrated debugging and trace capabilities for processor-based development.
Typical applications include industrial automation and factory control, embedded vision, networked communications equipment, industrial Ethernet gateways, data-acquisition systems, and programmable-logic-based signal processing. The 667 MHz processor is suitable for control-plane software and real-time operating systems, while the 85K-cell fabric can implement parallel algorithms, custom peripheral interfaces, motion-control logic, or hardware protocol handling.
Board design should follow the AMD package pinout, PCB stack-up, power-plane, decoupling, and differential-pair requirements for the CLG484 device. Place high-speed transceiver and processor interfaces according to the manufacturer reference design, provide independent supply filtering for each power rail, and validate signal integrity across the complete I/O and clock topology. A 484-CSPBGA also requires careful assembly planning because its dense ball grid complicates rework and complicates thermal-mechanical validation.
This page consolidates the AMD Zynq-7000 device specifications, distributor availability information, same-package speed-grade alternatives, and practical engineering guidance into one engineering-focused reference for the XC7Z020-L1CLG484I.
جایگزینهای drop-in برای XC7Z020-L1CLG484I — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای XC7Z020-L1CLG484I (همان فرمفاکتور و فوتپرینت) — متفاوت در Mounting Type, Package, Logic Cells, Speed Grade, Debug Support.
XC7Z020-1CLG484I
✅ جایگزین مستقیم✓ موجود
$45.9375 / واحد
مشاهده دیتاشیت ←XC7Z020-2CLG484I
✅ جایگزین مستقیم✓ موجود
$49 / واحد
مشاهده دیتاشیت ←XC7Z020-2CLG484CES
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC7Z020-L1CLG484I حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | Zynq-7000 system-on-chip with Artix-7 FPGA |
| Processor Core | Dual-core ARM Cortex-A9 MPCore |
| Processor Clock | 667 MHz |
| FPGA Logic Cells | 85K logic cells |
| Programmable Logic Technology | 28 nm Xilinx FPGA technology |
| Package Type | 484-CSPBGA |
| Package Dimensions | 19 x 19 mm |
| Number of Ball Contacts | 484 balls |
| نوع نصب | Surface mount |
| دمای اتصال کاری | -40°C to +100°C |
| Temperature Grade | Industrial |
| Debug Support | ARM CoreSight |
| سطح MSL | 3 (168 hours) |
| REACH Status | REACH unaffected |
| ECCN | 3A991 |
| HTS Code | 8542.39.0001 |
| Architecture | Heterogeneous ARM processing system plus programmable logic |
| CPU Count | 2 cores |
| FPGA Family | Artix-7 |
| SoC Family | Zynq-7000 |
| Logic Block Count | 6650 CLBs |
| High-Speed Design Support | Integrated high-speed serial transceivers |
راهنمای پیکربندی پین XC7Z020-L1CLG484I 19 x 19 mm
پیکربندی پین برای XC7Z020-L1CLG484I (پکیج 19 x 19 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای XC7Z020-L1CLG484I.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
XC7Z020-L1CLG484I مناسب است برای 6 کاربردs: Industrial Automation and Factory Control, Embedded Vision and Image Processing, Industrial Ethernet and Network Gateway, Data Acquisition and Signal Conditioning, Programmable Logic-Accelerated Control, Industrial Networking and Remote I/O.
Industrial Automation and Factory Control
The XC7Z020-L1CLG484I fits machine-control systems where deterministic hardware timing and a high-level operating system are both required. Its dual-core ARM Cortex-A9 processor can run supervisory control, communications, and diagnostics at 667 MHz, while the 85K-cell Artix-7 fabric can implement encoder interfaces, motion-control pipelines, and discrete I/O handling. Placing both functions in one 484-CSPBGA device reduces external interface complexity. The industrial -40°C to +100°C junction range supports controlled factory environments, although enclosure temperature and FPGA utilization must be included in the thermal design.
پیشنهادی
Embedded Vision and Image Processing
The Zynq architecture in the XC7Z020-L1CLG484I is well suited to embedded vision systems that divide work between software and hardware. The 667 MHz dual-core ARM Cortex-A9 section can execute operating-system software, camera control, and protocol handling, while the 85K programmable-logic cells can accelerate pixel transport, thresholding, or filtering stages. This heterogeneous division avoids moving every operation through the processor. The 484-CSPBGA package also provides a high-density interconnect for external image sensors and DDR memory, subject to AMD layout and signal-integrity guidance.
پیشنهادی
Industrial Ethernet and Network Gateway
The XC7Z020-L1CLG484I can serve as the central processor in an industrial communications gateway by combining control software with dedicated hardware interfaces. The ARM Cortex-A9 MPCore section can manage protocol stacks, storage, security services, and management interfaces, while programmable logic can implement custom packet handling or deterministic I/O. Its 85K logic cells offer useful hardware parallelism without moving to a much larger FPGA. The 484-CSPBGA package requires careful high-speed routing, and transceiver-based interfaces must follow the manufacturer reference layouts for reliable signal integrity.
پیشنهادی
Data Acquisition and Signal Conditioning
For data-acquisition equipment, the XC7Z020-L1CLG484I allows sampling logic, triggering, filtering, and buffering to be implemented in programmable hardware while the processor handles calibration and data transfer. The 85K-cell fabric can execute parallel acquisition pipelines at rates that would otherwise burden the 667 MHz processor, and the ARM cores can organize the resulting data into local or network-based storage. This partitioning also improves timing repeatability. Board-level analog isolation, high-speed clocking, memory routing, and calibration remain system-level responsibilities outside the SoC.
پیشنهادی
Programmable Logic-Accelerated Control
The XC7Z020-L1CLG484I is appropriate when control software must exchange data rapidly with hardware algorithms. Software can configure the 85K-cell Artix-7 fabric at run time, while dedicated pipelines handle filtering, counting, timing, or protocol decoding in parallel with the 667 MHz ARM cores. This is more flexible than a fixed logic device and more integrated than separate processor and FPGA implementations. Performance depends on the memory interface, clocking architecture, and partition design, so Vivado timing closure and board-level DDR validation are essential before deployment.
پیشنهادی
Industrial Networking and Remote I/O
A remote I/O or industrial networking controller can use the XC7Z020-L1CLG484I to combine protocol processing with hardware-level I/O aggregation. The dual-core ARM Cortex-A9 processor at 667 MHz can handle network stacks, device management, and diagnostics, while the programmable-logic section provides deterministic timing for counters, encoders, isolated interfaces, or protocol-specific hardware. The industrial junction range supports factory conditions, but the complete module also needs power-loss recovery, secure boot, watchdog behavior, and remote firmware-update provisions. Validate those system functions during hardware and software bring-up.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای XC7Z020-L1CLG484I — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | XC7Z020-1CLG484I | XC7Z020-2CLG484I | XC7Z020-2CLG484CES |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | 484-CSPBGA (19 x 19 mm) | 484-CSPBGA - same package | 484-CSPBGA - same package | 484-CSPBGA - same package |
| Processor | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore |
| Processor Speed | 667 MHz | 667 MHz class | Higher -2 speed grade | Higher -2 speed grade |
| FPGA Logic Cells | 85K logic cells | 85K logic cells | 85K logic cells | 85K logic cells |
| Programmable Logic Technology | 28 nm Xilinx FPGA technology | 28 nm Xilinx FPGA technology | 28 nm Xilinx FPGA technology | 28 nm Xilinx FPGA technology |
| Debug Support | ARM CoreSight | ARM CoreSight | ARM CoreSight | ARM CoreSight |
| Speed Grade | L1 | -1 | -2 | -2 |
| Programmable Logic Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Number of Ball Contacts | 484 balls | 484 balls | 484 balls | 484 balls |
تفاوتهای کلیدی
- Combines processor and programmable logic in one SoC (در مقابلXC7Z020-2CLG484I)
- Maintains the dense CLG484 footprint across speed grades (در مقابلXC7Z020-1CLG484I)
- Provides a higher-performance upgrade path without changing the package (در مقابلXC7Z020-2CLG484I)
- Combines 667 MHz embedded processing with 85K programmable cells (در مقابلXC7Z020-2CLG484CES)
یادداشتهای طراحی
Treat the CLG484 layout as a high-speed, high-pin-count design rather than a generic BGA. Follow the AMD reference design for ball assignment, power islands, decoupling, and high-speed routing. Place decoupling capacitors at the associated supply balls using the shortest possible current loops, preserve the recommended stack-up, and route clock and transceiver interfaces as controlled-impedance nets. Complete extraction-based signal-integrity analysis before fabrication because a nominal schematic match does not guarantee a compliant 484-CSPBGA layout.
The industrial junction limit for the XC7Z020-L1CLG484I is -40°C to +100°C, but junction temperature depends on processor load, programmable-logic utilization, and board heat spreading. Use the AMD power-estimation and thermal tools for the selected utilization profile, then validate the assembled board with an appropriate heat spreader or enclosure strategy. Estimated: any thermal model must include the measured ambient temperature and the heat-flow path from the package to the board because the junction rating alone does not determine safe operating margin.
Do not substitute a CLG400 package for CLG484, or confuse a faster speed grade with a temperature-qualified equivalent. A PCB designed for the 400-ball package will not accept the 484-CSPBGA footprint. Likewise, replacing the industrial L1 option with a commercial-grade suffix can violate the system temperature requirement. Confirm the exact ordering code, package-ball map, operating-temperature class, power budget, and Vivado target before committing a substitution.
Use the AMD Zynq-7000 package-device pinout files in TXT and CSV formats, with UG865 defining the file structure. Match every power, ground, configuration, clock, JTAG, processor, DDR, and transceiver connection against the selected device and package rather than relying on a generic symbol. Keep debug access and configuration signals routed predictably, and review the pinout file whenever a board variant changes memory size, package, or operating-speed grade.
اطلاعات انطباق
The component listing identifies the device as REACH unaffected with MSL 3 and ECCN 3A991. RoHS, lead-free, halogen-free, and conflict-minerals statements were not identified and remain unclassified.