XC95108-15PC84C - 108-Macrocell In-System CPLD | AMD
MPN: XC95108-15PC84C ✗ پایان تولیدXC95108-15PC84C نمای کلی
A CPLD combines programmable AND-array logic with an OR array to implement combinational and registered digital functions. Positioned in the hierarchy between individual gates and larger FPGAs, the XC95108 architecture provides deterministic timing, non-volatile configuration storage, and field reconfiguration for industrial control, telecommunications, instrumentation, and legacy system support.
The XC95108 family supports in-system programming, allowing a programmed configuration to be loaded or updated directly in the target circuit. Its 108 macrocells provide substantially more logic capacity than the smallest PLD devices while retaining the predictable timing behavior associated with CPLD architectures. The 69 available I/O lines support connections among external memories, interfaces, control logic, and bus transceivers.
The -15 speed designation identifies a 15 ns propagation-delay grade, while PC84C identifies the 84-terminal commercial-temperature package variant. Maximum supply voltage is 5.25 V, so designers should use the device with 5 V-class interface levels and confirm every external signal against the electrical characteristics in the XC95108 DS066 data sheet.
Typical implementations include legacy interface controllers, industrial automation modules, test and measurement equipment, embedded peripheral glue logic, and telecommunications line-interface subsystems. In-system programming also supports production programming, field upgrades, and configuration recovery after system maintenance.
Designers should treat the device as a legacy logic platform and verify the available configuration tools, programmer support, system-level timing, and supply requirements before committing a new production design. The PLCC-84 footprint also requires an appropriate socket or carefully designed land pattern rather than a typical fine-pitch BGA or QFP layout.
This page consolidates manufacturer documentation, distributor records, package characteristics, drop-in migration options, and application-oriented design guidance for engineers evaluating the XC95108-15PC84C.
جایگزینهای drop-in برای XC95108-15PC84C — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
XC95108-10PC84C
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC95108-20PC84C
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
XC95108-10PC84I
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC95108-20PC84I
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
ATF1508AS-15AU84
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
XC95108-15PC84C حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | In-system programmable CPLD |
| Macrocell Count | 108 macrocells |
| Propagation Delay | 15 ns |
| Maximum Supply Voltage | 5.25 V |
| I/O Line Count | 69 I/O lines |
| Programmable Logic Type | FLASH PLD |
| Configuration Method | In-system programmable |
| Package Code | QCCJ |
| Package Type | PLCC-84 square package with J-bend terminals |
| Terminal Count | 84 terminals |
| Temperature Grade | Commercial |
| Configuration Storage | Non-volatile FLASH configuration memory |
راهنمای پیکربندی پین XC95108-15PC84C plcc-84 square package with j-bend terminals
پیکربندی پین برای XC95108-15PC84C (پکیج plcc-84 square package with j-bend terminals). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای XC95108-15PC84C.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
XC95108-15PC84C مناسب است برای 6 کاربردs: Legacy Industrial Control Logic, Telecommunications Interface Support, Test and Measurement Instrumentation, Programmable Peripheral Glue Logic, Field-Programmable System Support, Aerospace and Defense Support Equipment.
Legacy Industrial Control Logic
The XC95108-15PC84C is suitable for consolidating control functions that were previously distributed across discrete gate arrays. Its 108 macrocells and 69 I/O lines provide substantial capacity for interlocks, state machines, sequencers, and interface decoding without relying on a soft processor. The 15 ns propagation-delay grade supports predictable control-path timing, while 5.25 V maximum supply voltage suits established 5 V industrial electronics. Because the device is obsolete, engineers should also evaluate tool availability, long-term component supply, and the work required to migrate to a currently supported CPLD or FPGA.
پیشنهادی
Telecommunications Interface Support
In established telecommunications equipment, the XC95108-15PC84C can implement protocol adaptation, framing, and control functions around external line-card or transceiver devices. Its 69 I/O lines are useful for parallel data buses and discrete control signals, while in-system programming permits configuration updates during manufacturing or field maintenance. The 15 ns grade and 108 macrocells allow moderate-speed logic pipelines and registered interface functions. For new designs, verify the legacy part's exact drive-strength, slew-rate, and I/O-standard requirements in DS066 before matching it to newer line-card components.
پیشنهادی
Test and Measurement Instrumentation
The XC95108-15PC84C is applicable to control and triggering logic in legacy test equipment where a compact PLCC device can coordinate mode selection, status decoding, and peripheral enables. The 108 macrocells provide room for multiple state machines and registered datapaths, while 69 I/O lines reduce the need for additional glue logic. Its FLASH configuration and in-system programming support repeatable production loading and service updates. Instrumentation designs must pay close attention to ground integrity and supply-noise isolation because timing margins depend on the board-level reference rather than the 15 ns device rating alone.
پیشنهادی
Programmable Peripheral Glue Logic
The XC95108-15PC84C is effective as configurable interface glue between asynchronous peripherals and a host controller. Address decoding, interrupt arbitration, FIFO control, and protocol translation can be consolidated into one device because 108 macrocells are available for moderate logic complexity. The 69 I/O lines allow multiple buses and chip selects to be implemented without another large logic package, and in-system programming supports board-level configuration management. Designers should confirm that each connected peripheral's voltage, direction, and timing requirements can be satisfied by the XC95108's specified I/O characteristics.
پیشنهادی
Field-Programmable System Support
In-system programmability makes the XC95108-15PC84C useful for designs that require configuration changes without replacing the component. Technicians can load a revised bitstream during maintenance, while production engineers can program assembled boards through the same interface. The 108 macrocells support moderate configuration revisions involving state-machine logic or interface remapping. This is particularly valuable in long-life industrial equipment, where component discontinuation can otherwise force a complete board replacement. Secure the programming interface in deployed products and establish a controlled revision process so field updates cannot silently change safety- or system-critical behavior.
پیشنهادی
Aerospace and Defense Support Equipment
The XC95108-15PC84C may be retained in legacy aerospace and defense ground-support equipment where changing an established logic board carries substantial requalification cost. Its 108 macrocells, 69 I/O lines, and deterministic 15 ns grade suit control, sequencing, and interface functions. The commercial C temperature designation does not satisfy an extended-temperature procurement requirement by itself, so an industrial or otherwise qualified ordering option must be selected and its ratings verified in DS066. For flight hardware or safety-critical systems, require formal traceability, change control, and manufacturer-approved sourcing before installation.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای XC95108-15PC84C — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | XC95108-10PC84C | XC95108-20PC84C | XC95108-10PC84I | XC95108-20PC84I | ATF1508AS-15AU84 |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | Microchip Technology |
| Package | PLCC-84 (QCCJ) | PLCC-84 (QCCJ) - same family package | PLCC-84 (QCCJ) - same family package | PLCC-84 (QCCJ) - same family package | PLCC-84 (QCCJ) - same family package | PLCC-84 - verify mechanical dimensions |
| Device Type | In-system programmable FLASH CPLD | In-system programmable FLASH CPLD | In-system programmable FLASH CPLD | In-system programmable FLASH CPLD | In-system programmable FLASH CPLD | FLASH PLD |
| Propagation Delay | 15 ns | 10 ns | 20 ns | 10 ns | 20 ns | 15 ns |
تفاوتهای کلیدی
- Exact XC95108 family architecture and 84-terminal footprint (در مقابلXC95108-20PC84C)
- Higher timing grade without changing family resources (در مقابلXC95108-10PC84C)
- Industrial-temperature family option for legacy temperature upgrades (در مقابلATF1508AS-15AU84)
- Documented in-system programmable FLASH configuration (در مقابلATF1508AS-15AU84)
یادداشتهای طراحی
Do not treat the PLCC-84 package designation as proof of cross-manufacturer pin compatibility. Before substituting ATF1508AS-15AU84, compare power pins, ground pins, configuration pins, user I/O assignments, and PLCC body dimensions against the AMD DS066 pinout. A matching terminal count alone does not establish that a programmed design will boot or operate correctly.
Route programming signals away from sensitive analog or high-speed nets and provide a stable, decoupled 5 V-class supply at the device pins. The 5.25 V figure is a maximum, not a recommended operating target. Keep configuration access accessible for production programming and service updates, and confirm the socket or land pattern against the QCCJ mechanical drawing before fabrication.
Legacy CPLD boards should be checked for aged or contaminated PLCC sockets before reuse. Contact resistance, corrosion, and thermal cycling can produce intermittent failures that are often misdiagnosed as configuration problems. Inspect sockets electrically, use a defined programming procedure for each board, and avoid repeated unnecessary power cycling of a legacy assembled system.
Use the DS066 timing tables to establish setup, hold, and clock-period budgets rather than deriving system timing from the 15 ns grade alone. Include propagation-delay variation, board loading, and external interface timing in the analysis. For new development, compare the migration device's I/O standards, clock resources, and tool-generated timing reports against the legacy XC95108 implementation.
اطلاعات انطباق
The available manufacturer document is the AMD XC95108 DS066 data sheet. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for this legacy device.