XC95108-15PC84C - 108-Macrocell In-System CPLD | AMD
Référence : XC95108-15PC84C ✗ Fin de vieXC95108-15PC84C Présentation
A CPLD combines programmable AND-array logic with an OR array to implement combinational and registered digital functions. Positioned in the hierarchy between individual gates and larger FPGAs, the XC95108 architecture provides deterministic timing, non-volatile configuration storage, and field reconfiguration for industrial control, telecommunications, instrumentation, and legacy system support.
The XC95108 family supports in-system programming, allowing a programmed configuration to be loaded or updated directly in the target circuit. Its 108 macrocells provide substantially more logic capacity than the smallest PLD devices while retaining the predictable timing behavior associated with CPLD architectures. The 69 available I/O lines support connections among external memories, interfaces, control logic, and bus transceivers.
The -15 speed designation identifies a 15 ns propagation-delay grade, while PC84C identifies the 84-terminal commercial-temperature package variant. Maximum supply voltage is 5.25 V, so designers should use the device with 5 V-class interface levels and confirm every external signal against the electrical characteristics in the XC95108 DS066 data sheet.
Typical implementations include legacy interface controllers, industrial automation modules, test and measurement equipment, embedded peripheral glue logic, and telecommunications line-interface subsystems. In-system programming also supports production programming, field upgrades, and configuration recovery after system maintenance.
Designers should treat the device as a legacy logic platform and verify the available configuration tools, programmer support, system-level timing, and supply requirements before committing a new production design. The PLCC-84 footprint also requires an appropriate socket or carefully designed land pattern rather than a typical fine-pitch BGA or QFP layout.
This page consolidates manufacturer documentation, distributor records, package characteristics, drop-in migration options, and application-oriented design guidance for engineers evaluating the XC95108-15PC84C.
Alternatives de remplacement direct pour XC95108-15PC84C — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
XC95108-10PC84C
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →XC95108-20PC84C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC95108-10PC84I
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XC95108-20PC84I
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ATF1508AS-15AU84
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC95108-15PC84C Valeurs maximales et caractéristiques électriques
| Device Type | In-system programmable CPLD |
| Macrocell Count | 108 macrocells |
| Propagation Delay | 15 ns |
| Maximum Supply Voltage | 5.25 V |
| I/O Line Count | 69 I/O lines |
| Programmable Logic Type | FLASH PLD |
| Configuration Method | In-system programmable |
| Package Code | QCCJ |
| Package Type | PLCC-84 square package with J-bend terminals |
| Terminal Count | 84 terminals |
| Temperature Grade | Commercial |
| Configuration Storage | Non-volatile FLASH configuration memory |
Guide de configuration des broches du XC95108-15PC84C plcc-84 square package with j-bend terminals
Configuration des broches du XC95108-15PC84C (boîtier plcc-84 square package with j-bend terminals). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC95108-15PC84C.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC95108-15PC84C convient pour 6 applications: Legacy Industrial Control Logic, Telecommunications Interface Support, Test and Measurement Instrumentation, Programmable Peripheral Glue Logic, Field-Programmable System Support, Aerospace and Defense Support Equipment.
Legacy Industrial Control Logic
The XC95108-15PC84C is suitable for consolidating control functions that were previously distributed across discrete gate arrays. Its 108 macrocells and 69 I/O lines provide substantial capacity for interlocks, state machines, sequencers, and interface decoding without relying on a soft processor. The 15 ns propagation-delay grade supports predictable control-path timing, while 5.25 V maximum supply voltage suits established 5 V industrial electronics. Because the device is obsolete, engineers should also evaluate tool availability, long-term component supply, and the work required to migrate to a currently supported CPLD or FPGA.
Recommandé
Telecommunications Interface Support
In established telecommunications equipment, the XC95108-15PC84C can implement protocol adaptation, framing, and control functions around external line-card or transceiver devices. Its 69 I/O lines are useful for parallel data buses and discrete control signals, while in-system programming permits configuration updates during manufacturing or field maintenance. The 15 ns grade and 108 macrocells allow moderate-speed logic pipelines and registered interface functions. For new designs, verify the legacy part's exact drive-strength, slew-rate, and I/O-standard requirements in DS066 before matching it to newer line-card components.
Recommandé
Test and Measurement Instrumentation
The XC95108-15PC84C is applicable to control and triggering logic in legacy test equipment where a compact PLCC device can coordinate mode selection, status decoding, and peripheral enables. The 108 macrocells provide room for multiple state machines and registered datapaths, while 69 I/O lines reduce the need for additional glue logic. Its FLASH configuration and in-system programming support repeatable production loading and service updates. Instrumentation designs must pay close attention to ground integrity and supply-noise isolation because timing margins depend on the board-level reference rather than the 15 ns device rating alone.
Recommandé
Programmable Peripheral Glue Logic
The XC95108-15PC84C is effective as configurable interface glue between asynchronous peripherals and a host controller. Address decoding, interrupt arbitration, FIFO control, and protocol translation can be consolidated into one device because 108 macrocells are available for moderate logic complexity. The 69 I/O lines allow multiple buses and chip selects to be implemented without another large logic package, and in-system programming supports board-level configuration management. Designers should confirm that each connected peripheral's voltage, direction, and timing requirements can be satisfied by the XC95108's specified I/O characteristics.
Recommandé
Field-Programmable System Support
In-system programmability makes the XC95108-15PC84C useful for designs that require configuration changes without replacing the component. Technicians can load a revised bitstream during maintenance, while production engineers can program assembled boards through the same interface. The 108 macrocells support moderate configuration revisions involving state-machine logic or interface remapping. This is particularly valuable in long-life industrial equipment, where component discontinuation can otherwise force a complete board replacement. Secure the programming interface in deployed products and establish a controlled revision process so field updates cannot silently change safety- or system-critical behavior.
Recommandé
Aerospace and Defense Support Equipment
The XC95108-15PC84C may be retained in legacy aerospace and defense ground-support equipment where changing an established logic board carries substantial requalification cost. Its 108 macrocells, 69 I/O lines, and deterministic 15 ns grade suit control, sequencing, and interface functions. The commercial C temperature designation does not satisfy an extended-temperature procurement requirement by itself, so an industrial or otherwise qualified ordering option must be selected and its ratings verified in DS066. For flight hardware or safety-critical systems, require formal traceability, change control, and manufacturer-approved sourcing before installation.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC95108-15PC84C — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC95108-10PC84C | XC95108-20PC84C | XC95108-10PC84I | XC95108-20PC84I | ATF1508AS-15AU84 |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | Microchip Technology |
| Package | PLCC-84 (QCCJ) | PLCC-84 (QCCJ) - same family package | PLCC-84 (QCCJ) - same family package | PLCC-84 (QCCJ) - same family package | PLCC-84 (QCCJ) - same family package | PLCC-84 - verify mechanical dimensions |
| Device Type | In-system programmable FLASH CPLD | In-system programmable FLASH CPLD | In-system programmable FLASH CPLD | In-system programmable FLASH CPLD | In-system programmable FLASH CPLD | FLASH PLD |
| Propagation Delay | 15 ns | 10 ns | 20 ns | 10 ns | 20 ns | 15 ns |
Principaux différenciateurs
- Exact XC95108 family architecture and 84-terminal footprint (vs XC95108-20PC84C)
- Higher timing grade without changing family resources (vs XC95108-10PC84C)
- Industrial-temperature family option for legacy temperature upgrades (vs ATF1508AS-15AU84)
- Documented in-system programmable FLASH configuration (vs ATF1508AS-15AU84)
Notes de conception
Do not treat the PLCC-84 package designation as proof of cross-manufacturer pin compatibility. Before substituting ATF1508AS-15AU84, compare power pins, ground pins, configuration pins, user I/O assignments, and PLCC body dimensions against the AMD DS066 pinout. A matching terminal count alone does not establish that a programmed design will boot or operate correctly.
Route programming signals away from sensitive analog or high-speed nets and provide a stable, decoupled 5 V-class supply at the device pins. The 5.25 V figure is a maximum, not a recommended operating target. Keep configuration access accessible for production programming and service updates, and confirm the socket or land pattern against the QCCJ mechanical drawing before fabrication.
Legacy CPLD boards should be checked for aged or contaminated PLCC sockets before reuse. Contact resistance, corrosion, and thermal cycling can produce intermittent failures that are often misdiagnosed as configuration problems. Inspect sockets electrically, use a defined programming procedure for each board, and avoid repeated unnecessary power cycling of a legacy assembled system.
Use the DS066 timing tables to establish setup, hold, and clock-period budgets rather than deriving system timing from the 15 ns grade alone. Include propagation-delay variation, board loading, and external interface timing in the analysis. For new development, compare the migration device's I/O standards, clock resources, and tool-generated timing reports against the legacy XC95108 implementation.
Informations de conformité
The available manufacturer document is the AMD XC95108 DS066 data sheet. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for this legacy device.