Circuits intégrés

PIC24HJ16GP304-H/ML

PIC24HJ16GP304-H/ML - 16-bit 40 MIPS 16KB Flash MCU | Microchip

The Microchip Technology PIC24HJ16GP304-H/ML is a high-performance 16-bit microcontroller from the PIC24H family, delivering up to 40 MIPS of processing throughput at 3.0-3.6V and offering 16 KB of on-chip Flash program memory in a 44-pin QFN (8x8 mm) package. The CPU implements a 16-bit data path with a 24-bit instruction word, modified Harvard architecture, and an enhanced instruction set with multiple addressing modes tailored for high-speed, repetitive computations and real-time control. On-chip peripherals include the Peripheral Pin Select (PPS) subsystem, multiple 16-bit timers, a 10/12-bit Analog-to-Digital Converter, UART, SPI, I2C, and a 16-bit Parallel Port, all interrupt-driven by a five-cycle latency controller. A microcontroller (MCU) is a single-chip computer that integrates a CPU, volatile and non-volatile memory, programmable peripherals, and clock circuitry. The PIC24H is a digital signal controller-class MCU family: it combines a 16-bit datapath with DSP-oriented instructions while retaining the deterministic interrupt response of a traditional microcontroller. Within the broader taxonomy, the PIC24H sits between 8-bit PIC MCUs and 32-bit ARM Cortex-M parts, offering higher computational headroom than 8-bit devices while remaining easier to deploy than 32-bit platforms for legacy code bases and motor-control applications. Key features include 16 KB Flash with self-programmability, 2 KB SRAM, 30 MIPS sustained throughput at 3.3V, a 4-channel DMA controller, configurable 5V-tolerant digital I/O, and integrated nanoWatt power management. The -H suffix denotes the High temperature grade (industrial -40C to +150C), and the /ML designator specifies the lead-free 44-pin QFN (8x8 mm) package. The device is pin-compatible with the dsPIC33F family and shares a high degree of architectural compatibility with the dsPIC30F family, easing firmware migration between the three lines. The modified Harvard architecture separates program and data memory buses, allowing concurrent instruction fetch and data access. The 24-bit instruction word accommodates a variable-length opcode field with built-in DSP support, enabling single-cycle MAC (multiply-accumulate) operations. Five cycle interrupt latency and a hardware multiplier dedicated to DSP operations make the device well suited to closed-loop control where determinism matters more than peak throughput. Typical applications include industrial motor control (BLDC, PMSM, and stepper drives), digital power conversion (PFC and LLC controllers), sensor signal conditioning, building automation, automotive body electronics, and medical instrumentation. The industrial temperature grade extends deployment to outdoor, under-hood, and harsh-environment designs that exceed consumer-grade -40C to +85C limits. When designing with this device, allocate the PPS remap carefully: every peripheral signal can be routed to almost any digital I/O pin, but two signals cannot share a pin simultaneously. Plan the pin map in the source header before schematic entry. This page synthesizes verified distributor pricing, drop-in alternatives (same-brand and cross-brand), application notes, and practical design notes not consolidated in the manufacturer datasheet alone.

Devis Contact

PIC24HJ16GP304-H/PT

PIC24HJ16GP304-H/PT - 16-bit 40 MIPS MCU, 16KB Flash | Microchip

The Microchip Technology PIC24HJ16GP304-H/PT is a 16-bit microcontroller from the PIC24H family, delivering 40 MIPS performance with a 16KB Flash program memory and a 44-pin TQFP package (10x10 mm). It features 21 I/O ports, a 20 MHz instruction-cycle clock, and operates across an automotive 3.0 V to 3.6 V supply range, with the -H temperature grade qualified for the standard -40C to +150C junction temperature window suitable for harsh environments. The PIC24HJ16GP304-H/PT belongs to a family that is pin-compatible with the dsPIC33F digital signal controllers, allowing engineers to migrate to DSP performance without a board re-spin. A 16-bit microcontroller (MCU) is an integrated circuit that executes instructions on 16-bit data widths, enabling higher computational throughput and more efficient C-compiler code density than 8-bit parts. The PIC24H family uses a modified Harvard architecture with a 16-bit data path, 24-bit instruction word, and a hardware multiplier, positioning the family in the hierarchy: PIC24H -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. Compared with 8-bit MCUs, the 16-bit core simplifies arithmetic for control loops, ADC sampling, and communication stacks, while still retaining the deterministic interrupt behavior expected in real-time embedded designs. Key features of the PIC24HJ16GP304-H/PT include 16KB Flash (16K x 24 instruction words), 2KB SRAM, a 10/12-bit Analog-to-Digital Converter, multiple Enhanced Capture/Compare/PWM modules, UART, SPI, and I2C peripherals, and the Cyclic Redundancy Check (CRC) module shared across the PIC24HJ32GP202/204 and PIC24HJ16GP304 family. The 40 MIPS throughput is sustained by a single-cycle hardware multiply and a 16x16-bit divider, supporting high-bandwidth digital control at moderate clock rates. Typical applications include automotive body and chassis subsystems, industrial motor control, sensor conditioning, point-of-load conversion, lighting controllers, and human-machine interface panels. The 44-pin TQFP footprint provides ample GPIO for multi-channel sensing and actuator drive, while the 16-bit core simplifies the implementation of PI/PID control algorithms and digital filtering. When designing with this device, ensure your supply decoupling and the recommended 4 MHz to 20 MHz crystal/oscillator network per the datasheet. Use the ICSP programming interface for in-circuit firmware updates, and confirm that the -H temperature grade meets your application's worst-case ambient. This page consolidates distributor pricing, drop-in alternatives, and practical design notes not found in the bare datasheet.

Devis Contact

PIC24HJ16GP304-I/PT

PIC24HJ16GP304-I/PT - 40 MIPS 16-bit MCU 16KB Flash 44-TQFP | Microchip

The Microchip PIC24HJ16GP304-I/PT is a 16-bit PIC24H microcontroller delivering 40 MIPS CPU performance from a 16 KB (5.5K x 24) Flash program memory and 2 KB SRAM, housed in a 44-pin TQFP (10x10 mm) surface-mount package. It supports a 3.0 V to 3.6 V supply range, integrates a 12-bit ADC with up to 13 input channels, and exposes 35 digital I/O pins through Microchip's Peripheral Pin Select (PPS) remap fabric. The core combines a modified Harvard bus with a 16-bit datapath and 24-bit instruction words, enabling deterministic interrupt latency for real-time control loops. A 16-bit microcontroller is a single-chip processor that combines a 16-bit CPU datapath, on-chip Flash, SRAM, and a rich set of peripherals in a single IC, sitting in the hierarchy MCU -> microcontroller -> embedded processor -> semiconductor. The PIC24H family targets high-speed, repetitive-computation and closed-loop-control applications that exceed the performance envelope of 8-bit MCUs while remaining lower cost and lower power than 32-bit ARM Cortex-M parts. The PIC24HJ16GP304 is the 16 KB Flash / 28- to 44-pin variant of the dsPIC33F-compatible PIC24HJ16GP302 family. Key differentiating specifications include 40 MIPS sustained throughput from a 20 MHz external crystal (4x PLL), 16 KB self-programmable Flash with ECC, hardware CRC engine, JTAG boundary scan, and five 16-bit timers. The PPS fabric allows nearly every digital peripheral to be routed to a wide selection of physical pins, simplifying PCB layout and reducing muxing constraints. Two UART/SPI/I2C modules, two CAN 2.0B controllers, and a 6-channel PWM/OC make it well suited to multi-protocol industrial nodes. The architecture uses a 24-bit fixed-width instruction set with 16-bit datapath registers, separate program and data buses, and a 17-bit x 17-bit hardware multiplier that delivers single-cycle MAC operations critical for digital signal processing routines. A two-level pipeline and deterministic interrupt response free of Flash wait-state stalls let the device sustain real-time control loops at the 40 MIPS ceiling without jitter. Typical applications include industrial motor control, sensor data acquisition nodes, automotive body and chassis subsystems, digital power conversion, and USB-less consumer appliances that require CAN, UART, and SPI connectivity. The wide operating temperature range of -40C to +85C supports both commercial and industrial deployments. When designing with this part, allocate at least one analog pin for Vcap decoupling and follow Microchip's recommended 10 uF + 0.1 uF bulk bypass topology to ensure core voltage regulator stability. Programmers should configure the JTAGEN fuse before relying on boundary-scan for production test, since boundary-scan is disabled by default to free the four JTAG pins for general I/O use. This page synthesizes distributor stock, parametric drop-in alternatives, and practical design notes beyond what is contained in the manufacturer datasheet, allowing an engineer to evaluate the PIC24HJ16GP304-I/PT against comparable parts in a single view.

Devis Contact

PIC24HJ16GP304T-I/ML

PIC24HJ16GP304T-I/ML - 16-bit 40MIPS MCU, 16KB Flash, 44-QFN | Microchip

The Microchip Technology PIC24HJ16GP304T-I/ML is a 16-bit RISC microcontroller from the PIC24H family, delivering 40 MIPS performance at up to 40 MHz CPU clock, with 16 KB (5.5K x 24) of program Flash and 2 KB of RAM. It is housed in a 44-pin QFN (8x8 mm) package with exposed pad (Tape and Reel packaging), operates from 3.0V to 3.6V, and is qualified for the industrial -40C to +85C temperature grade. A PIC24H microcontroller belongs to the 16-bit microcontroller hypernym hierarchy: microcontroller -> MCU -> embedded processor -> semiconductor. The PIC24H family uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, enabling single-cycle MAC operations and deterministic interrupt latency required for real-time control. The device is pin-compatible with the dsPIC33F family, sharing the same peripheral set and migration path, which gives engineers a clear upgrade route to DSP functionality. Key features: 16 KB self-programmable Flash with ECC, 2 KB SRAM, hardware multiplier (17-bit x 17-bit single cycle), 16-channel 10-bit/12-bit ADC (up to 500 ksps), four 16-bit timers/counters, two UART, two SPI, one I2C, five PWM/OC outputs with dedicated time base, and a real-time clock calendar. JTAG and ICSP programming/debug interfaces are supported. The 44-QFN (ML) package provides an effective thermal path through the exposed pad for higher dissipation applications. Typical applications: digital motor control (BLDC, PMSM, stepper), industrial sensor conditioning, UPS and power-converter control loops, automotive body electronics (non-safety), and general-purpose real-time DSP front-ends. The 40 MIPS sustained throughput and 16-bit DSP engine make it well suited for closed-loop control and signal conditioning at the edge. Design consideration: The exposed pad (EP) MUST be soldered to the PCB ground plane with multiple thermal vias to achieve rated thermal performance. Decoupling capacitors must be placed as close as possible to VDD/VSS pins, and unused I/O should be configured as outputs low to minimize power consumption. This page synthesizes distributor pricing, drop-in PIC24H same-family alternatives, application notes, and design guidance not found in the manufacturer datasheet alone.

Devis Contact

PIC24HJ256GP206-I/PT

PIC24HJ256GP206-I/PT - 16-bit 40MIPS 256KB Flash MCU | Microchip

The Microchip Technology PIC24HJ256GP206-I/PT is a 16-bit PIC24H microcontroller delivering 40 MIPS at 3.3V, with 256 KB (85.5K x 24) of Flash program memory and 8 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. It integrates a 16-channel 10/12-bit ADC, multiple UART/SPI/I2C peripherals, eight output compare/PWM channels, and a flexible timer system, providing high performance with excellent code density in the well-recognized PIC architecture. The "I" suffix denotes the industrial temperature grade of -40C to +85C, and the "PT" suffix denotes the TQFP-64 package with lead-free surface-mount terminations. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, peripherals, and I/O on one IC. The PIC24H family uses a 16-bit modified Harvard RISC architecture with a 16-bit instruction set and 24-bit instruction width, optimized for high-throughput DSP and control code while retaining C-compiler friendliness. Within the broader taxonomy, this part is a microcontroller -> embedded data memory CPU -> semiconductor IC. PIC24H devices offer seamless migration paths to PIC24F, dsPIC30F, and dsPIC33F families, allowing code and peripheral reuse across product generations. Key features include 256 KB self-programmable Flash, 8 KB SRAM, two UART modules, two SPI interfaces, one I2C interface, eight 16-bit timers, eight output-compare/PWM channels, four input-capture channels, and a 16-input 12-bit ADC. The 64-pin TQFP package supports ample GPIO and analog channel counts for mixed-signal designs. The industrial -40C to +85C operating range and 3.0V-3.6V Vdd specification suit industrial, medical, and consumer-embedded environments where robust thermal performance and deterministic real-time control are required. Typical applications include industrial motor control, digital power conversion, sensor interfacing, embedded audio processing, and portable instrumentation. Designers benefit from the rich peripheral mix and deterministic interrupt latency, simplifying firmware development for PID loops, commutation logic, and protocol stacks. The 256 KB Flash region supports substantial state machines and protocol stacks (e.g., USB, TCP/IP via libraries) without external memory. When designing with this device, allocate decoupling capacitors close to every Vdd/Vss pin pair, follow Microchip's recommended PCB layout for the analog AVdd/AVss rail, and configure the JTAG/ICSP pins (PGECx/PGEDx pairs) to avoid contention with on-chip peripherals during programming. Use the device's on-chip regulators or external LDO to provide the 3.3V rail within tolerance. This page synthesizes distributor pricing, drop-in PIC24H alternatives, application circuit examples, and practical design notes that supplement the manufacturer datasheet with engineering-relevant context.

Devis Contact

PIC24HJ256GP206A-E/MR

PIC24HJ256GP206A-E/MR - 16-bit 40MIPS MCU 256KB Flash | Microchip

The Microchip Technology PIC24HJ256GP206A-E/MR is a high-performance 16-bit microcontroller from the PIC24H family, featuring a 40 MIPS CPU core, 256 KB of flash program memory (85.5K x 24), and 16 KB of SRAM, all integrated in a 64-pin VQFN exposed-pad (9x9 mm) package rated for the enhanced -40C to +125C industrial temperature range. The device operates from a 3.0V to 3.6V supply and is qualified to automotive AEC-Q100 standards, making it suitable for safety-critical and harsh-environment designs. A 16-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a rich set of peripheral interfaces onto one die. PIC24H devices use a 16-bit-wide data path with a modified Harvard architecture and a C-compiler-optimized instruction set, sitting in the hierarchy between 8-bit PIC MCUs and 32-bit PIC32 devices. They are engineered for high-speed, repetitive control loops and DSP-style computation without the cost of a full 32-bit core. Key features of the PIC24HJ256GP206A include 53 general-purpose I/O pins, two UART modules, two SPI ports, one I2C bus, two CAN modules, and a 12-bit A/D converter with up to 16 input channels. The part also exposes two comparator modules, five 16-bit timer/counters, and an 8-bit parallel master port. These resources are accessible through a pinout that is shared across the PIC24HJXXXGPX06/X08/X10 family, which simplifies migration between pin-compatible family members with different memory densities. On-chip peripherals are interconnected through an 8-channel DMA controller that can move data between memory and peripherals without CPU intervention, freeing the 40 MIPS core for closed-loop control, encoder decoding, or numerical processing. The PIC24HJ256GP206A also supports advanced motor-control PWM, Quadrature Encoder Interface (QEI), and a charge time measurement unit (CTMU) for capacitive touch applications. Typical applications include industrial motor control (BLDC, PMSM, and AC drives), automotive body and chassis ECUs, solar inverters, uninterruptible power supplies, and digital power conversion. The combination of CAN, high-resolution PWM, and QEI makes the part especially well suited to field-oriented control (FOC) of three-phase motors. The 256 KB flash supports field-updateable firmware with the dual-partition In-Circuit Serial Programming (ICSP) mechanism. When designing with this MCU, allocate the decoupling network recommended in the datasheet (a 0.1 uF ceramic plus a 10 uF bulk) close to VDD/VSS pairs, and solder the exposed thermal pad to a continuous ground plane for proper 64-VQFN heat dissipation. Programming and trace use the two-wire ICD interface; reserve the dedicated PGECx/PGEDx pins in your layout to avoid rework later. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer datasheet, so engineers can qualify, source, and lay out the PIC24HJ256GP206A-E/MR faster.

Devis Contact

PIC24HJ256GP206A-I/PT

PIC24HJ256GP206A-I/PT - 16-bit 40 MIPS 256KB Flash MCU | Microchip

The Microchip Technology PIC24HJ256GP206A-I/PT is a high-performance 16-bit microcontroller from the PIC24H family, delivering 40 MIPS throughput at up to 40 MHz core clock, with 256 KB of self-programmable Flash program memory, 16 KB SRAM, and a 64-pin TQFP (PT) package rated for the industrial temperature range (-40C to +85C). It is built on a modified Harvard architecture with a C compiler-optimized instruction set and a 16-bit wide data path. A 16-bit microcontroller (MCU) is a microprocessor core with a 16-bit data width, instruction pipeline, and integrated peripherals aimed at embedded real-time control. The PIC24H belongs to the hierarchy PIC24 -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. Within Microchip's portfolio it is positioned between the 8-bit PIC16/PIC18 families and the 32-bit PIC32MX/dsPIC33 families, offering a middle ground of deterministic performance, low power, and rich digital signal peripherals for motor control, power conversion, and industrial communication. Key features include 256 KB Flash (85.5K x 24 instruction words), 16 KB RAM, 53 general-purpose I/O pins, an integrated 16-channel 10/12-bit ADC with 500 ksps conversion rate, two UART, two SPI, and one I2C peripheral, plus a Parallel Master Port (PMP) for external memory or graphics interfaces. The device operates from 3.0 V to 3.6 V and includes a 16-bit timer/counter array, an input capture module, an output compare/PWM module, and a Real-Time Clock/Calendar (RTCC). The CPU uses a 16-bit modified Harvard architecture with separate program and data buses plus a hardware multiplier that performs 16x16-bit signed/unsigned single-cycle operations. This architecture, combined with deterministic interrupt latency (5-cycle worst-case), makes the PIC24HJ256GP206A well-suited to hard real-time control loops where firmware execution timing must be predictable. Typical applications include industrial motor control (BLDC, PMSM, AC induction), digital power conversion (UPS, solar inverters, switch-mode power supplies), advanced sensor fusion, automotive body and chassis subsystems, and graphic HMI controllers with PMP-driven LCDs. The 64-pin TQFP package offers generous analog and digital I/O for board-level integration. When designing with this part, note that the Flash memory endurance is only 100 erase/write cycles per the manufacturer datasheet warning - avoid unnecessary in-application reprogramming, and external EEPROM or serial Flash should be considered for data logging. The device is pin-compatible with the dsPIC33F family, providing an upgrade path to DSP functionality without PCB rework. This page synthesizes Microchip datasheet specifications, distributor pricing, drop-in-compatible alternatives drawn from the PIC24HJ family and dsPIC33F family, and practical design notes not aggregated on any single manufacturer or distributor page.

Devis Contact

PIC24HJ256GP206AT-I/MR

PIC24HJ256GP206AT-I/MR - 16-bit 40MIPS 256KB Flash MCU | Microchip

The Microchip Technology PIC24HJ256GP206AT-I/MR is a 16-bit RISC microcontroller from the PIC24H family, delivering up to 40 MIPS of computational throughput and 256 KB (85.5K x 24) of on-chip Flash program memory, housed in a 64-pin VQFN (9x9 mm) package with an exposed thermal pad. Operating from a 3.3 V supply, this PIC24H device combines high-performance DSP-like arithmetic with a deterministic 16-bit architecture and is pin-compatible with the dsPIC33F family of devices for design portability across digital signal control and general-purpose embedded applications. What is a 16-bit MCU? A 16-bit microcontroller (MCU) is an embedded processor whose internal datapath, registers, and ALU are 16 bits wide. The PIC24H family extends this baseline with a modified Harvard architecture, hardware multiply, single-cycle bit manipulation, and a wide selection of analog and communication peripherals. Within the broader MCU taxonomy, the PIC24H sits between 8-bit PIC16/PIC18 controllers and 32-bit Cortex-M devices, and is classified within Microchip's 16-bit DSC (Digital Signal Controller) product tree alongside the dsPIC33F family. Key features of the PIC24HJ256GP206AT-I/MR include 16 KB of RAM, up to 16 MIPS per MHz performance scaling, two UART modules, two SPI modules, up to two I2C modules, an Enhanced CAN module, and a 10/12-bit ADC peripheral set. The device supports a maximum CPU clock of 80 MHz (yielding 40 MIPS), with integrated power management and multiple low-power modes for battery-driven designs. Architecturally, the PIC24HJXXXGPX06A/X08A/X10A family uses a 16-bit modified Harvard core with a deterministic instruction pipeline, hardware multiply/divide, and 24-bit instruction words. This combination gives C-compiled code an efficient execution profile while still allowing precise interrupt-latency control that real-time applications require. Typical applications include industrial motor control, sensor signal conditioning, building automation, automotive body and chassis subsystems, medical instrumentation, and consumer appliances. The Enhanced CAN interface is particularly valuable in vehicle networks, while the ADC and PWM peripherals suit three-phase inverter and BLDC commutation designs. When designing with this part, use the 64-pin VQFN land pattern and ensure the exposed thermal pad is soldered to a sufficiently large copper pour for heat dissipation. Configure the oscillator with the appropriate PLL ratio to balance CPU throughput against EMI, and consult the dsPIC33F compatibility documentation if migrating firmware between the two families. This page synthesizes Microchip device specifications, distributor pricing, and design guidance not found in the standalone datasheet, giving engineers a single reference for evaluation, sourcing, and drop-in replacement decisions.

Devis Contact

PIC24HJ256GP206AT-I/PT

PIC24HJ256GP206AT-I/PT - 40 MIPS 256KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24HJ256GP206AT-I/PT is a 16-bit microcontroller from the PIC24H General Purpose family, delivering up to 40 MIPS performance at 3.3 V in a 64-pin TQFP (10x10 mm) package. It integrates 256 KB of Flash program memory, 16 KB of RAM, and a rich set of peripherals including multiple UART, SPI, I2C, ECAN, and a 16-channel 10/12-bit ADC. The "T" suffix denotes Tape & Reel packaging, while the "A" suffix denotes the A-revision silicon with enhanced features. Industrial temperature grade (-40C to +85C) and 3.0 V to 3.6 V operating voltage make it suitable for embedded control and signal acquisition. What is a 16-bit microcontroller? A 16-bit MCU is a single-chip computer whose datapath, registers, and ALU are 16 bits wide, offering higher computational throughput and code density than 8-bit parts while consuming less power than 32-bit cores. The PIC24H family belongs to the broader category of Microchip DSC (Digital Signal Controller) derivatives and occupies the mid-range of Microchip's performance pyramid: PIC -> 16-bit PIC24 -> PIC24H (high-performance) -> 32-bit PIC32. The PIC24H is widely used in motor control, power conversion, industrial sensing, and CAN-connected automotive/industrial nodes. Key differentiating features include 40 MIPS execution from a modified Harvard core with C-compiler-optimized instruction set, 16 KB unified data RAM accessible from DMA and the CPU, and an on-chip 16-channel 12-bit ADC capable of 500 ksps. The device also provides a 16-bit timer/capture/compare module set, hardware ECAN 2.0B for automotive/industrial networks, and a Peripheral Pin Select (PPS) mechanism that allows flexible remapping of digital peripherals to any I/O pin. Architecture details: The PIC24HJ256GP206A uses a 16-bit modified Harvard architecture with separate program and data paths, a 24-bit instruction word, and a hardware multiplier (17-bit x 17-bit single-cycle). The core supports 84 instructions including DSP-aware addressing modes, enabling efficient FFT and FIR filtering without off-chip DSP silicon. PPS allows most digital peripherals to be mapped onto a wide choice of pins, easing PCB layout. Typical applications include industrial sensor conditioning and CAN node interfaces, motor control driver boards (BLDC, stepper, PMSM), HVAC and building automation controllers, automotive body and chassis ECUs, medical instrumentation front-ends, and USB device/HID peripherals when paired with an external transceiver. When designing with this part, reserve at least one PPS-capable pin group for the UART/SPI/I2C peripherals you intend to use, and verify the 3.3 V rail regulation (the device does not include an internal LDO for core supply). For new designs consider the PIC24HJ256GP610A successor family for higher analog integration. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not aggregated on the manufacturer product page.

Devis Contact

PIC24HJ256GP210-I/PF

PIC24HJ256GP210-I/PF - 16-bit 40MIPS 256KB Flash MCU | Microchip

The Microchip Technology PIC24HJ256GP210-I/PF is a high-performance 16-bit microcontroller from the PIC24H family, delivering 40 MIPS (Million Instructions Per Second) execution throughput at 80 MHz core clock. It integrates 256 KB (85.5K x 24 instruction words) of Flash program memory and 30 KB of SRAM, packaged in a 100-pin TQFP (14x14 mm, PF suffix) industrial-temperature variant. A 16-bit MCU (microcontroller unit) is a single-chip computer integrating a CPU, memory, and programmable peripherals, used for embedded control where 8-bit devices lack the performance and 32-bit devices waste cost and power. The PIC24H family specifically targets high-speed, repetitive computation and closed-loop control, slotting into the broader taxonomy: microcontroller -> embedded processor -> semiconductor. It offers a 16-bit modified Harvard architecture with DSP-friendly instructions, C-optimized instruction layout, and seamless code migration to PIC24F (lower power), dsPIC30F, and dsPIC33F (DSP) families. Key features include two UART modules, two SPI interfaces, two I2C modules, two CAN modules (one ECAN plus one mCAN) for industrial networking, a 16-channel 10/12-bit ADC with 500 ksps conversion rate, four 16-bit timers, eight output compare/PWM channels, and a parallel master port. The device operates from 3.0 V to 3.6 V across -40C to +85C industrial temperature range, with on-chip voltage regulation eliminating external analog supply rails. A JTAG/debug port and trace buffer enable real-time development with MPLAB X IDE and the MPLAB ICD 3 / REAL ICE in-circuit emulators. Architecture-wise, the PIC24HJ256GP210 uses Microchip's 16-bit modified Harvard core with a 24-bit instruction word and 16-bit data path, allowing single-cycle MAC operations and deterministic interrupt response. The 256 KB Flash is divided into a primary program region and a separate block region supporting live firmware update via the dual-panel Flash partition scheme. Typical applications include industrial motor control (BLDC, PMSM, AC induction drives), industrial automation PLCs, CAN-connected sensor nodes, power-conversion digital control loops, medical instrumentation, and high-speed data acquisition front-ends. Two on-chip CAN modules and PWM make this device especially suited to multi-axis motor control cards and distributed factory nodes. When designing with this device, place bulk and decoupling capacitors within 5 mm of each power pin pair (VDD/VSS), keep analog and digital ground returns split until the single-point connection under the IC, and verify that high-current PWM traces are at least 0.5 mm wide to handle multi-ampere H-bridge returns. Programming via ICSP requires the recommended PGECx/PGEDx pin assignments - check device errata before locking the PCB. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not aggregated in any single manufacturer document.

Devis Contact

PIC24HJ256GP210-I/PT

PIC24HJ256GP210-I/PT - 16-bit 40MIPS 256KB Flash MCU | Microchip

The Microchip Technology PIC24HJ256GP210-I/PT is a high-performance 16-bit microcontroller from the PIC24H family, delivering up to 40 MIPS at 3.3V (60 MIPS when operated at higher Vdd with PLL enabled) and integrating 256 KB of flash program memory with 16 KB of on-chip SRAM, packaged in a 100-pin TQFP (12x12 mm). This device combines a powerful PIC® modified Harvard RISC architecture with a rich peripheral set, including a 12-bit A/D converter with up to 32 input channels, multiple UART, SPI, and I²C interfaces, plus a 16-bit Parallel Master Port for external memory or graphics interfacing. A 16-bit microcontroller (MCU) is a single-chip computer that executes instructions on 16-bit-wide data paths, sitting in the hierarchy between 8-bit MCUs (such as the PIC16/PIC18 families) and 32-bit MCUs (such as the PIC32MX or ARM Cortex-M devices). Within Microchip's taxonomy the PIC24H family is the highest-performance 16-bit line before the dsPIC33F DSC family, sharing pin compatibility with dsPIC33F and offering seamless migration paths to/from PIC24F and dsPIC30F. These MCUs target embedded control applications that demand deterministic interrupt response, DSP-class math, and abundant I/O. Key features of the PIC24HJ256GP210-I/PT include 256 KB self-programmable flash (85.5K x 24 words) with EEPROM emulation, 16 KB SRAM, a 16-channel hardware DMA controller that offloads data movement from the CPU, an Enhanced CAN 2.0B module for automotive and industrial networking, four 16-bit timers, nine 16-bit Input Capture and Output Compare/PWM channels, a Real-Time Clock/Calendar with on-chip low-power 32 kHz crystal oscillator, and a 10-bit 1 MSPS ADC alongside the 12-bit 500 ksps ADC. The Industrial temperature grade (-40 °C to +85 °C) and TQFP-100 footprint make it broadly applicable across factory automation, motor control, and medical instrumentation. Architecturally the PIC24HJ256GP210 uses a 24-bit instruction word with 16-bit data paths, a 7-stage pipeline, hardware multiply/divide (17-bit x 17-bit single-cycle MAC), and a deterministic interrupt latency of 5 cycles. Its peripheral set is mapped onto a peripheral pin-select (PPS) matrix that allows most digital functions to be remapped to a wide range of I/O pins, simplifying PCB routing. The 16-bit Parallel Master Port and Enhanced CAN module position this device for applications that previously required external logic or a secondary MCU. Typical applications include industrial motor control (BLDC, PMSM, AC induction), CAN-based automotive body and chassis nodes, graphic LCD or OLED user-interface controllers, multi-channel data-acquisition systems, and digital signal conditioning. It is pin-compatible with the entire PIC24HJXXXGPX06/X08/X10 family and with the dsPIC33FJXXXGPX06/X08/X10 DSC devices, which simplifies firmware upgrades when the application outgrows a pure control MCU and requires on-chip DSP. When designing with the PIC24HJ256GP210-I/PT, plan decoupling with at least one 0.1 µF ceramic capacitor per Vdd/Vss pair and a single bulk 10 µF tantalum or ceramic near the regulator output. The device can be programmed and debugged in-circuit via Microchip's ICD 3, REAL ICE, or PICkit 3 programmers using the standard 2-wire PGECx/PGEDx interface. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, making it a faster starting point for embedded engineers evaluating 16-bit MCU platforms.

Devis Contact

PIC24HJ256GP210A-E/PF

PIC24HJ256GP210A-E/PF - 40 MIPS 16-bit MCU 256KB Flash 100-TQFP | Microchip

The Microchip Technology PIC24HJ256GP210A-E/PF is a 16-bit PIC24H microcontroller running up to 40 MIPS at 3.3V, integrating 256 KB (85.5K x 24 words) of Flash program memory and 16 KB of SRAM in a 100-pin TQFP (14x14 mm) package. The PIC24HJ256GP210A family is positioned for high-speed control loops and DSP-style computations where 8-bit MCUs run out of headroom, while remaining fully static CMOS for low-power idle behavior. A 16-bit microcontroller (MCU) is an integrated processor that fetches 16-bit instructions from on-chip Flash, executes them on a modified Harvard core with on-chip peripherals (timers, ADC, UART, SPI, I2C, PWM, etc.), and is targeted at applications that need more throughput and code density than 8-bit parts but not the cost of a Cortex-M class device. Within Microchip's taxonomy this part belongs to the PIC24H dsPIC-style 16-bit MCU family, which is pin-compatible with the dsPIC33F DSP MCU family, allowing migration when DSP extensions are later required. Key features include 40 MIPS sustained throughput from a 2.0V-3.6V supply, 256 KB self-programmable Flash with an endurance of >10k cycles, up to 16 KB SRAM, two UART modules, two SPI, two I2C, two I2S, a 10/12-bit ADC, multiple 16-bit timers, and a parallel master port. The 'GP' family variant optimizes for general-purpose I/O rich designs versus the motor-control 'MC' or op-amp 'GA' series. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power conversion (PFC, LLC, full-bridge), sensor conditioning and instrumentation, factory automation controllers, and consumer appliances with TFT or graphics HMI. The -E temperature grade extends operation from -40C to +125C for harsh industrial environments. Designers should bias all unused I/O to defined logic states via internal pull-ups or external resistors to minimize standby current, and follow the decoupling scheme in the datasheet (typically 0.1 uF near each VDD/VSS pair and a 10 uF bulk cap). Pin migration from 64-pin to 100-pin TQFP variants preserves peripheral mapping. This page synthesizes distributor pricing, pin-compatible drop-in alternatives within the PIC24HJ256GP206/GP210/GP310 family, and practical design notes that go beyond the manufacturer datasheet.

Devis Contact

PIC24HJ256GP210A-E/PT

PIC24HJ256GP210A-E/PT - 16-bit 40MIPS MCU 256KB Flash | Microchip

The Microchip Technology PIC24HJ256GP210A-E/PT is a high-performance 16-bit microcontroller from the PIC24H family, delivering 40 MIPS at 3.3V in a 100-pin TQFP (12x12 mm) package. It integrates 256 KB of Flash program memory (85.5K x 24 words) and 16 KB of SRAM, providing ample code and data space for DSP-oriented control applications. The "E" temperature grade (-40C to +125C) and AEC-Q100 qualification make this part suitable for automotive and extended-industrial environments. A 16-bit microcontroller (MCU) is an embedded processor that executes instructions on 16-bit-wide data paths, sitting in the hierarchy between 8-bit MCUs (lower performance, lower cost) and 32-bit MCUs (higher performance, higher complexity). Within Microchip's taxonomy, the PIC24H family belongs to the "MCU > 16-bit MCU > dsPIC33/PIC24H" branch, designed for high-speed repetitive computations combined with deterministic control. The PIC24HJ256GP210A-E/PT extends this branch by adding automotive-grade qualification and a larger 100-pin TQFP footprint for applications demanding many I/O pins and analog channels. Key features include a 40 MHz internal oscillator with PLL (40 MIPS execution), a 12-bit ADC with up to 32 channels and 500 ksps conversion rate, two UART modules, two SPI modules, two I2C modules, two CAN modules, and a 16-bit Parallel Master Port (PMP) for external bus expansion. DMA with 8 channels offloads data movement from the CPU, and a 16-bit timer/capture/compare/PWM peripheral set enables motor-control and power-conversion timing. The architecture pairs a modified Harvard bus with a 24-bit instruction word, allowing most instructions to execute in one cycle. The CPU includes hardware DSP support (multiply-accumulate), making this device well-suited for digital filtering, sensor fusion, and motor-control algorithms where fixed-point math is acceptable. The peripheral set is pin-compatible with the dsPIC33F family, allowing migration paths to DSP-capable variants without PCB redesign. Typical applications include automotive body and chassis control, industrial motor drives, three-phase inverters, sensor signal conditioning, LED lighting controllers, and medical instrumentation. The CAN interfaces suit automotive networks (CAN 2.0B) and industrial fieldbus, while the 12-bit ADC handles analog sensor input directly. The wide temperature range and AEC-Q100 qualification support under-hood and dashboard automotive designs. When designing with this part, allocate the 100-pin TQFP footprint carefully - the package requires a 12x12 mm PCB land pattern with thermal pad considerations. Use MPLAB X IDE with XC16 compiler for development; ICD 3 or ICD 4 in-circuit debuggers and PICkit 3 programmers support this device. The PLL configuration register must be programmed before the high-speed oscillator is enabled, otherwise the device may lock up at default FRC. This page synthesizes drop-in alternatives from the same PIC24H family, automotive-grade variants, pricing tiers from authorized distributors, and practical design notes that the standalone datasheet does not aggregate.

Devis Contact

PIC24HJ256GP210A-I/PT

PIC24HJ256GP210A-I/PT - 40 MIPS 256KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24HJ256GP210A-I/PT is a 16-bit PIC24H general-purpose microcontroller running up to 40 MIPS at 40 MHz with 256 KB (85.5K x 24) of Flash program memory and 16 KB of SRAM, housed in a 100-pin TQFP (PT) package measuring 12x12 mm. The integrated DMA controller moves data between peripherals and memory without CPU intervention, while an enhanced 16-channel 10-bit/12-bit ADC, multiple UART/SPI/I2C peripherals, and JTAG boundary-scan support round out the device. Operating voltage spans 3.0V to 3.6V with an industrial temperature range of -40C to +85C. What is a PIC24H microcontroller? A PIC24H is a 16-bit RISC microcontroller from Microchip's PIC24 family that uses a modified Harvard architecture with 16-bit instructions and 24-bit instructions targeting sixteen data word registers. Within the Microchip taxonomy the PIC24H sits in the 16-bit microcontroller hierarchy: PIC24F (low-power) < PIC24H (high-performance 16-bit) < PIC24E (high-performance 40-70 MIPS) < dsPIC33 (DSP-enabled). It is pin-compatible with the dsPIC33F family, allowing code and PCB reuse when designers migrate to DSP functionality. An embedded DMA engine, multi-channel ADC, and rich peripheral set position the PIC24H for demanding real-time control. Key features include 256 KB self-programmable Flash with EEPROM emulation in RAM, 16 KB SRAM, an 8-channel DMA controller, two UART modules with IrDA support, two SPI modules, two I2C modules, a 16-channel 12-bit ADC with 500 ksps throughput, and JTAG IEEE 1149.1 boundary-scan compliance. Five 16-bit timer/counter modules, an input capture module, and an output compare/PWM module complete the timer subsystem. Architecturally the PIC24H uses a single-cycle 16-bit ALU, hardware multiply/divide, and a 24-bit instruction word with 16-bit data paths, achieving up to 40 MIPS at 40 MHz. The internal DMA can transfer data between ADC, UART, SPI, and RAM without waking the CPU, while the integrated 16-channel ADC with dual-sample-and-hold enables simultaneous motor-current and back-EMF measurement. Typical applications include industrial motor control (BLDC, PMSM, AC induction), high-performance sensor processing, multi-protocol industrial communication bridges, and digital power conversion control loops. The combination of 40 MIPS throughput and DMA offload makes the device well suited for closed-loop control at PWM rates above 100 kHz. When designing with this MCU, provide adequate bulk capacitance on the 3.3V rail for ADC reference stability, leave JTAG pins accessible for production boundary-scan testing, and ensure external oscillator load capacitors match the crystal manufacturer recommendations for reliable start-up.

Devis Contact

PIC24HJ256GP210AT-I/PF

PIC24HJ256GP210AT-I/PF - 16-bit 40MIPS 256KB Flash MCU | Microchip

The Microchip Technology PIC24HJ256GP210AT-I/PF is a 16-bit RISC microcontroller featuring a PIC24 CPU core, 256 KB of Flash program memory, and a maximum 40 MIPS throughput, packaged in a 100-pin TQFP (14x14 mm, 0.5 mm pitch) industrial-temperature tape-and-reel format. It integrates 16 KB RAM, 4 KB EEPROM-like auxiliary Flash, 8 KB of auxiliary Flash for data, and a 16-channel 10-bit ADC A/D pipeline (1.1 Msps aggregate throughput) for data acquisition and signal conditioning. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), and a rich set of peripherals on a single silicon die. The PIC24HJ256GP210AT-I/PF belongs to the PIC24HJ 16-bit MCU family that occupies the middle of Microchip's 16-bit portfolio (F >> H >> EP), bridging 8-bit PIC16/PIC18 designs and the dsPIC33F digital signal controllers. Its 16-bit modified-Harvard architecture with 24-bit instructions targets deterministic real-time control rather than integer-crunching DSP workloads. Key differentiating features include a 40 MHz maximum clock frequency producing 40 MIPS of sustained throughput, an enhanced 16-bit timer/capture/compare module set, dual UART/SPI/I2C peripherals, an internal 7.37 MHz Fast RC oscillator with PLL, and 85 GPIO pins arranged across multiple I/O ports. The device operates from 3.0-3.6 V, supports an industrial -40C to +85C temperature range (I-grade), and includes JTAG boundary-scan alongside Microchip's ICSP programming interface for in-circuit debug. Architecturally, the PIC24HJ256GP210A employs a 5-stage pipeline, a 16 x 16-bit working register array, and a DMA engine that can shuttle data between peripherals and RAM without CPU intervention. The 'A' silicon revision (PIC24HJ256GP210A) extends peripheral timing and electrical performance over the original PIC24HJ256GP210, while pin-for-pin compatibility with the dsPIC33F family allows migration to DSP capability if FFT/FIR math becomes a requirement. Typical applications include industrial motor control (BLDC/PMSM FOC), multi-loop PID process control, building automation HVAC controllers, PLC expansion modules, power-conversion digital controllers (DC/DC, PFC), and graph display driver MCUs for HMI panels. The 100-pin TQFP footprint gives designers 85 GPIO plus analog channels for keypad, LCD, motor-driver, and communication interfaces simultaneously. When designing with this device, plan the PLL configuration and oscillator start-up delay carefully because the internal FRC + PLL loop must settle before the regulator can release the system. A 1 mF bulk + 100 nF decoupling pair at each VDD/VSS pair is essential given the 40 MIPS switching activity of this PIC24HJ256GP210A industrial MCU. This page synthesizes distributor pricing, drop-in Microchip alternatives, and practical design notes not found in the manufacturer datasheet alone, helping procurement and firmware teams rapidly qualify a 40 MIPS 16-bit PIC24H MCU replacement candidate.

Devis Contact

PIC24HJ256GP210AT-I/PT

PIC24HJ256GP210AT-I/PT - 256KB Flash 40MIPS 16-bit MCU | Microchip

The Microchip PIC24HJ256GP210AT-I/PT is a high-performance 16-bit microcontroller from the PIC24H family, delivering 40 MIPS at 3.3V with 256KB of Flash program memory (85.5K x 24) housed in a 100-pin TQFP (12x12 mm) package. It features 16KB of RAM, a 40 MHz maximum operating frequency, and a 16-channel 10/12-bit ADC capable of 500 ksps conversion rates. A 16-bit microcontroller (MCU) is a programmable integrated circuit that uses a 16-bit data path, instruction word, and internal registers to execute arithmetic, logic, and control operations. The PIC24H belongs to the dsPIC/PIC24 family hierarchy: 16-bit MCU -> dsPIC/PIC24 family -> Modified Harvard architecture MCU -> embedded controller. These devices occupy the performance tier between 8-bit PIC MCUs and 32-bit ARM Cortex devices, making them suitable for computationally intensive real-time control. Key differentiating specifications of the PIC24HJ256GP210AT-I/PT include 256KB self-programmable Flash with endurance of 1000 erase/write cycles, a 16-channel 12-bit ADC with 500 ksps throughput, multiple communication peripherals (UART, SPI, I2C, ECAN, and parallel PMP), and industrial-grade operating temperature of -40C to +85C. The 'T' suffix indicates Tape & Reel packaging, while 'I/PT' denotes the 100-pin TQFP industrial-temperature variant. The device uses a Modified Harvard architecture with a 16-bit wide datapath and 24-bit instruction word, providing up to 40 MIPS performance at 3.3V. It integrates DSP-aware arithmetic operations including MAC (multiply-accumulate) and bit-reversed addressing, simplifying digital filter and FFT algorithm implementation. The peripheral set supports motor control PWM, encoder interfaces, and CAN 2.0b networking, enabling single-chip solutions in industrial automation. Typical applications include industrial motor control (BLDC, PMSM, ACIM drives), digital signal processing front-ends, building automation controllers, medical patient-monitoring instruments, automotive body and chassis ECUs, and high-performance sensor/fanout hubs. The device's pin compatibility with the dsPIC33F family enables seamless migration between pure control and DSP-enhanced firmware variants. When designing with this part, verify that the 3.0V to 3.6V supply is regulated and that the 100-pin TQFP layout reserves adequate copper area for the exposed thermal pad. Configuration bits must be programmed for oscillator selection, watchdog timer, and code protection during production programming. This page synthesizes distributor pricing, drop-in alternative TQFPVB-100 parts from the same Microchip PIC24H family, and practical PCB layout guidance not consolidated in the manufacturer datasheet.

Devis Contact

PIC24HJ256GP210T-I/PF

PIC24HJ256GP210T-I/PF - 40 MIPS 256KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24HJ256GP210T-I/PF is a 16-bit PIC24H general-purpose microcontroller delivering 40 MIPS performance, 256 KB of Flash program memory, and 16 KB of RAM, packaged in a 100-pin TQFP (14x14) surface-mount housing. According to the Microchip PIC24HJ256GP210 family datasheet, this MCU combines a high-performance 16-bit modified Harvard CPU core with rich peripheral integration including multiple UART, SPI, I2C, and enhanced CAN interfaces, an external memory bus, and a 10/12-bit ADC. A PIC24 microcontroller is a 16-bit MCU from Microchip's PIC24 family that uses a modified Harvard architecture with separate program and data buses, enabling single-cycle instruction prefetch and deterministic interrupt response. It sits within the broader hierarchy of microcontrollers (MCU -> 16-bit MCU -> PIC24 -> PIC24H high-performance), positioned above the 8-bit PIC16/PIC18 families and below the 32-bit PIC32 devices. The PIC24H subfamily is optimized for high-throughput DSP-adjacent applications without a full DSP engine. Key features include 85 I/O pins, two UART modules, two SPI interfaces, two I2C peripherals, two Enhanced CAN 2.0B modules, one 16-bit timer and five 16-bit timers/counters, an input capture module, and a 10-bit/1.1 Msps A/D converter with up to 32 input channels. The device operates from 3.0 V to 3.6 V across an industrial -40C to +85C temperature range and supports in-circuit serial programming (ICSP) plus JTAG boundary scan. Technically, the PIC24HJ256GP165 architecture provides a 24-bit instruction word with 16-bit data paths, 17 x 17-bit hardware multiplier, 32-bit barrel shifter, and zero-overhead hardware DO/REPEAT loops, delivering 40 MIPS at 80 MHz FOSC. The integrated DMA controller with up to 8 channels offloads peripheral transfers and frees the CPU for control logic. Typical applications include industrial automation and motor control, data acquisition systems, communication gateways, building automation controllers, medical instrumentation, and automotive body/telematics ECUs. Designers typically choose this device when they need large Flash for protocol stacks plus CAN connectivity in a single chip. When designing with this MCU, allocate a 100 nF decoupling capacitor near each power pin and a 10 uF bulk capacitor on the 3.3 V rail. The PIC24HJ256GP210 is a 3.3 V part; do not apply 5 V signals to any I/O. Always configure unused I/O as outputs to minimize power consumption. This page synthesizes distributor pricing, drop-in alternatives, and practical design guidance not included in the bare manufacturer datasheet, giving engineers a faster selection path.

Devis Contact

PIC24HJ256GP610A-H/PF

PIC24HJ256GP610A-H/PF - 16-bit 40 MIPS MCU 256KB Flash TQFP-100 | Microchip

The Microchip Technology PIC24HJ256GP610A-H/PF is a 16-bit microcontroller from the PIC24H family featuring a high-performance 40 MIPS core, 256 KB of Flash program memory (organized as 85.5K x 24), and 16 KB of on-chip SRAM, housed in a 100-pin TQFP (14x14 mm) package. It operates from a 3.0 V to 3.6 V supply and is AEC-Q100 qualified for automotive applications, making it well suited to harsh-environment designs. The '-H' temperature grade indicates -40C to +150C operation, while the '/PF' suffix designates the TQFP-100 package with Tray packaging. A 16-bit microcontroller (MCU) is a programmable integrated circuit that uses a 16-bit data path, registers, and arithmetic logic unit to deliver higher code density and throughput than 8-bit architectures while remaining simpler and lower-cost than 32-bit parts. The PIC24H belongs to the Microchip dsPIC33F/PIC24H ecosystem, sharing peripherals with the dsPIC33F Digital Signal Controller family and offering a documented migration path to PIC24F, dsPIC30F, and dsPIC33F devices. Within the broader taxonomy, a PIC24H MCU is a member of the microcontroller -> embedded controller -> semiconductor device hierarchy. The PIC24HJ256GP610A in particular integrates 256 KB Flash and 16 KB SRAM for application and data storage. Key differentiating features include a Harvard architecture with a modified RISC instruction set supporting 16-bit and 32-bit operations, a hardware multiply engine with single-cycle 16x16 or 32x16 multiplication, and a 16-bit data shifter capable of up to 16-bit single-cycle shifts. Integrated peripherals include a 16-channel 10-bit/12-bit ADC (depending on variant), multiple PWM modules, a Real-Time Clock and Calendar (RTCC), UART, SPI, I2C, ECAN, DMA controller, watchdog timer, brown-out reset, and power-on reset. The PIC24HJ256GP610A-H/PF also provides two 3-wire SPIs and 4-wire SPIs as well as 4 UARTs (with IrDA support) for serial communication. The device architecture uses a 16-bit wide program memory bus paired with a separate 16-bit data bus, allowing simultaneous instruction fetch and data access. Internal PLL operation allows the part to run at 40 MIPS from a typical 8 MHz crystal, and the divide algorithm completes one cycle per bit of divisor. This combination of high-throughput core, ample SRAM, and rich peripherals positions the PIC24HJ256GP610A-H/PF for applications that need deterministic interrupt latency and computational headroom. Typical applications include automotive body and chassis control, industrial motor control (BLDC, PMSM, and AC induction drives), Uninterruptible Power Supply (UPS) and power conversion control, advanced sensing platforms (satcom and instrumentation), and high-reliability consumer/industrial embedded control. The wide operating temperature range and AEC-Q100 grade also suit under-hood and ruggedized installations. The PIC24HJ256GP610A-H/PF is pin-compatible with the dsPIC33F family, allowing seamless migration to a DSP-capable part without PCB rework. When designing with this MCU, allocate adequate decoupling (typically 0.1 uF ceramic per VDD/AVDD pin), and use the Explorer 16 or equivalent development board to validate the firmware build with the latest MPLAB X IDE and XC16 compiler. Verify that any drop-in alternative shares the same TQFP-100 footprint and peripheral map before substituting. This page synthesizes distributor pricing, pin-compatible drop-in alternatives within the PIC24H family, and practical design notes not found in the manufacturer datasheet.

Devis Contact

PIC24HJ256GP610A-I/PT

PIC24HJ256GP610A-I/PT - 40 MIPS 16-bit MCU 256KB Flash | Microchip

The Microchip Technology PIC24HJ256GP610A-I/PT is a high-performance 16-bit microcontroller from the PIC24H family, delivering 40 MIPS at 3.3V with 256 KB Flash and 16 KB SRAM, housed in a 100-pin TQFP (12x12 mm) package. It uses a 16-bit modified Harvard architecture with a 24-bit instruction word and supports up to 85.5K x 24 of program memory, providing ample headroom for advanced DSP-style control loops and high-speed signal conditioning. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash, SRAM), and programmable peripherals on one die. Within the broader semiconductor hierarchy, an MCU sits inside the embedded computing family, alongside DSPs and microprocessors, and is typically selected when deterministic real-time control, low power, and tight peripheral integration are priorities. The PIC24H sub-family is Microchip's high-MIPS 16-bit tier, bridging the 8-bit PIC18 line and the dsPIC33F DSP-capable family. Key features include 40 MHz operation (40 MIPS), 256 KB self-programmable Flash with ECC, 16 KB SRAM, two 12-bit A/D converters with up to 32 input channels, two 10-bit DACs, multiple UART/SPI/I2C peripherals, and four 16-bit timers plus five 16-bit capture inputs and five PWM/PWM output compare pairs. The device operates from 3.0V to 3.6V and supports an industrial -40C to +85C temperature range. Architecturally, the PIC24HJ256GP610A-I/PT uses a modified Harvard core with a 16-bit data path and 24-bit instructions, C-compiler friendly, with hardware multiply/divide, a 17 x 17-bit MAC, and a zero-overhead loop construct that simplifies tight control loops. Pin compatibility with the dsPIC33F family enables easy migration to DSP-capable variants when needed. Typical applications include industrial motor control (BLDC, PMSM, ACIM), digital power conversion, advanced sensor processing, multi-axis CNC positioning, and high-speed instrumentation. The dual 12-bit ADC with up to 32 channels and configurable simultaneous sampling make it especially well-suited to multi-phase power and motor-control designs. When designing, ensure decoupling with 0.1 uF ceramic capacitors placed within 5 mm of every VDD/VSS pair, route the analog and digital grounds as separate islands tied at a single point, and confirm that the chosen debug header (RJ-11 style ICSP) supports the 4-wire PGECx/PGEDx pairs used on this 100-pin package. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a faster path from spec review to EV battery production.

Devis Contact

PIC24HJ256GP610AT-I/PF

PIC24HJ256GP610AT-I/PF - 40 MIPS 16-bit MCU 256KB Flash 100-TQFP | Microchip

The Microchip Technology PIC24HJ256GP610AT-I/PF is a high-performance 16-bit microcontroller from the PIC24H family, featuring a 40 MIPS modified Harvard RISC CPU core, 256 KB of self-programmable Flash program memory, and a 100-pin TQFP (14x14 mm) package with industrial -40C to +85C operating temperature support. The "AT" suffix denotes tape-and-reel packaging while the "I" code indicates the industrial temperature grade and the "/PF" suffix identifies the 100-pin TQFP package. A 16-bit microcontroller (MCU) is a single-chip computer that combines a 16-bit CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of on-chip peripherals. The PIC24H sits in Microchip's mid-range 16-bit portfolio, positioned above the 8-bit PIC16/PIC18 families for higher-throughput signal-processing and control applications. The PIC24H family is software- and pin-compatible with the dsPIC33F DSC family, allowing code and PCB reuse when motor-control or DSP features are later required. Key differentiating features of the PIC24HJ256GP610AT-I/PF include 256 KB (85.5K x 24) Flash, 16 KB SRAM, a 16-channel 10-bit ADC capable of 1.1 Msps, two UART modules, two SPI modules, two I2C modules, an Enhanced CAN 2.0B module, and two 16-bit timers plus two 32-bit timers. The 40 MIPS core at 3.3V provides ample headroom for closed-loop control algorithms. The 100-TQFP footprint exposes up to 85 I/O pins, supporting parallel bus interfaces and dual analog front-end channels simultaneously. Architecturally, the PIC24HJ256GP610A device employs a 16-bit data path with 24-bit instruction words, a 7-stage pipeline, hardware multiply/divide, and a flexible interrupt controller with 5-cycle latency. The on-chip DMA controller (8-channel) offloads data movement between peripherals and RAM, freeing the CPU for control loops. The device operates from 3.0V to 3.6V and supports industrial-grade -40C to +85C ambient temperatures. Typical applications include industrial motor control (BLDC/PMSM FOC), CAN-connected automotive body and chassis ECUs, digital power conversion (SMPS control loops), medical instrumentation signal processing, multi-loop process control, and embedded graphics/HMI controllers. The combination of CAN, ADC, PWM, and 40 MIPS throughput makes it a strong fit for real-time industrial networking nodes. When designing with this part, reserve a dedicated 3.3V LDO rail (such as MCP1700) and follow Microchip's recommended 100 nF + 10 uF decoupling arrangement. Configure the FRC + PLL block to deliver 40 MIPS from an 8 MHz crystal via the FPLLIDIV:FPLLODIV chain, and ensure the Vcap pin is tied to a 10 uF low-ESR capacitor. Industrial designers should also provision the ICD/PGD/PGC pins for in-circuit programming access. This page synthesizes distributor availability, drop-in alternatives from the same PIC24H 100-TQFP family, comparison parameters, and practical design notes that extend beyond the manufacturer datasheet summary, helping engineers evaluate, select, and source the PIC24HJ256GP610AT-I/PF for production designs.

Devis Contact

PIC24HJ256GP610AT-I/PT

PIC24HJ256GP610AT-I/PT - 40 MIPS 16-bit MCU, 256KB Flash TQFP-100

The Microchip Technology PIC24HJ256GP610AT-I/PT is a high-performance 16-bit microcontroller from the PIC24H family, executing up to 40 MIPS at 3.3 V and integrating 256 KB of Flash program memory (85.5K x 24) in a 100-pin TQFP (12x12) package. It is specified for the industrial -40C to +85C temperature range and ships in tape-and-reel packaging (T suffix). A 16-bit microcontroller (MCU) is a single-chip computer that processes instructions and data over a 16-bit-wide datapath, delivering higher computational throughput and better C-code density than 8-bit parts while staying lower in cost and power than 32-bit cores. Within the embedded hierarchy it sits as a sub-family of microcontrollers, which themselves belong to the broader category of embedded processors and SoCs used for control-oriented designs. MV201 families like PIC24H are aimed at applications that require deterministic, high-speed repetitive computation such as DSP filtering, motor control and sensor fusion. Key features include 16 KB SRAM, the PIC24H Harvard architecture with a wide 24-bit instruction path, an integrated DSP engine, multiple 16-bit timers, a 10/12-bit ADC up to 1.1 Msps, and the dsPIC33F pin-compatible migration path. The wide 24-bit instruction word and rich peripheral set enable efficient fixed-point DSP and PID control loops without offloading work to a coprocessor, while the 40 MIPS throughput comfortably handles multi-loop control at 4 kHz switching frequencies. The architecture uses a 17 x 17-bit hardware multiplier and a 40-bit accumulator, achieving single-cycle MAC operations that accelerate DSP kernels. A robust interrupt controller with configurable priority and vectoring supports deterministic real-time response, and the on-chip DMA engine offloads data movement between the ADC, ECAN and SPI/I2C peripherals, freeing the CPU for control-law execution. Typical applications include industrial motor control (BLDC, PMSM and ACIM drives), digital power conversion (PFC plus full-bridge control), sensor signal conditioning, automotive body electronics (when paired with the AEC-Q100 grade variant), and embedded connectivity hubs. The wide memory and DSP engine also suit audio processing, predictive maintenance vibration analysis, and grid-tied solar inverters where repetitive math dominates the workload. When designing, ensure the on-board regulator delivers a stable 3.0-3.6 V rail and respect the 100-pin TQFP layout guidelines - keep the analog AVSS/AVDD pair isolated from the noisy digital supply and place the 0.1 uF + 10 uF bulk capacitors within 6 mm of each pair to keep ADC noise low. Use the ICD 3 or MPLAB REAL ICE probe header for in-circuit debugging and boundary-scan programming. This page consolidates distributor stock, parametric drop-in alternatives, and practical design considerations not found in the bare manufacturer datasheet, helping engineers evaluate and source this MCU more efficiently.

Devis Contact

PIC24HJ256GP610T-I/PF

PIC24HJ256GP610T-I/PF - 40 MIPS 16-bit MCU 256KB Flash | Microchip

The Microchip Technology PIC24HJ256GP610T-I/PF is a 16-bit PIC24H general-purpose microcontroller delivering 40 MIPS (Million Instructions Per Second) performance, housed in a 100-pin TQFP (14x14 mm) package. It integrates 256 KB (85.5K x 24) of Flash program memory, 16 KB of RAM, and a rich peripheral set aimed at high-performance embedded control. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and peripherals such as ADCs, timers, communication interfaces, and I/O. The PIC24H family sits in Microchip's 16-bit MCU hierarchy between the 8-bit PIC18 and the 32-bit PIC32 families, offering higher performance than 8-bit parts while remaining cost-effective and easy to migrate to from PIC24F, dsPIC30F, or dsPIC33F devices. Key features include a 16-bit modified Harvard architecture with a 16 x 16-bit single-cycle hardware multiplier, up to 41 interrupt sources with priority levels, and a 10-bit ADC at up to 1.1 Msps. Communication peripherals include UART, SPI, I2C, and ECAN modules, while dedicated motor-control PWM and a parallel master port (PMP) enable direct interface to graphics or memory peripherals. The device operates from 3.0V to 3.6V (typical 3.3V) across an industrial temperature range of -40C to +85C. The "-I" suffix denotes industrial temperature, "T" denotes tape-and-reel packaging, and "PF" indicates the 100-pin TQFP (14x14) package. This combination makes the part suitable for factory automation, motor control, and consumer applications. Typical applications include industrial motor control (BLDC, stepper, and servo), digital power conversion, sensor signal processing, USB device/host interfacing, audio processing, and graphical user interface (GUI) controllers with TFT panels. The 256 KB Flash supports complex state machines and protocol stacks such as Modbus or CANopen. When designing with the PIC24HJ256GP610T-I/PF, ensure your toolchain is the MPLAB X IDE with the XC16 compiler. Decouple VDD/VSS pairs with 100 nF ceramic capacitors placed within 5 mm of each supply pin, and route the analog AVdd/AVss separately from digital supply for ADC accuracy. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24H family, and practical design notes not consolidated in the Microchip datasheet.

Devis Contact

PIC24HJ256GP610T-I/PT

PIC24HJ256GP610T-I/PT - 256KB Flash 16-bit MCU 40MIPs TQFP-100 | Microchip

The Microchip PIC24HJ256GP610T-I/PT is a high-performance 16-bit PIC microcontroller from the PIC24H family featuring 256KB of Flash program memory (85.5K x 24), 16KB of RAM, and an 85-pin I/O count, all housed in a 100-pin TQFP (12x12 mm) package. It operates at up to 40 MIPS from a 3.0V to 3.6V supply, with an industrial operating temperature range of -40C to +85C. The part is supplied in tape and reel packaging, designated by the 'T' suffix, while the 100-pin TQFP (PT) package provides generous I/O and peripheral expansion for embedded designs. A 16-bit microcontroller (MCU) is an integrated circuit that combines a CPU, program memory (typically Flash), data memory (RAM), and on-chip peripherals (timers, ADC, communication blocks) into a single silicon die. PIC24H MCUs use a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, balancing deterministic interrupt response with high computational throughput suitable for real-time control, digital signal processing pre-processing, and complex communication stacks. Compared with 8-bit MCUs, PIC24H parts deliver higher code density, larger addressable memory, and richer peripheral integration while retaining the same peripheral library architecture as dsPIC33F devices. Key features of this part include 256KB of self-programmable Flash with code protection, 16KB SRAM, a 16-channel 10-bit/12-bit ADC (configuration dependent), multiple UART/SPI/I2C peripherals, a 16-bit timer/capture/compare/PWM block, DMA for CPU-offload data movement, and a Real-Time Clock Calendar (RTCC) with external 32.768 kHz crystal support. The 85 I/O pins tolerate 5V input and are 5V output capable on the digital periphery, easing mixed-voltage interfacing to legacy peripherals and sensors. Architecturally, the PIC24HJ256GP610T-I/PT uses the proven PIC24H core running at 40 MIPS, with a 2-cycle hardware multiply and a divide engine supporting 32-bit math in hardware. A 17-bit x 17-bit single-cycle MAC, 16-bit barrel shifter, and zero-overhead DO/REPEAT loops accelerate DSP-style filtering and PID control loops, while the DMA controller moves ADC samples and UART data without CPU intervention. Typical applications include BLDC and PMSM motor control, industrial sensor signal conditioning, UPS inverter controllers, building automation HVAC controllers, industrial-grade human-machine interface (HMI) panels, and low-cost audio effects processing. The wide peripheral set and large Flash also suit protocol bridges (e.g. Modbus to CAN) and multi-master communitative scheduling. When designing with this part, ensure that the 100-pin TQFP land pattern has adequate thermal copper, that AVdd and AVss are cleanly decoupled, and that the 32.768 kHz SOSC crystal load capacitors match the chosen crystal's CL spec. For motor control applications, pair this MCU with a Microchip MCP8024 or TC2xxx gate driver and use the dedicated PWM/ADC trigger routing shown in the datasheet for deterministic current sampling. This page synthesizes distributor pricing from DigiKey, drop-in same-package alternatives within the PIC24H family, and practical design notes that go beyond the datasheet's pin table - including thermal and crystal-layout guidance tailored to industrial motor control.

Devis Contact

PIC24HJ32GP202-E/MM

PIC24HJ32GP202-E/MM - 16-bit 40MIPS MCU, 32KB Flash | Microchip

The Microchip PIC24HJ32GP202-E/MM is a 16-bit PIC24H microcontroller with 40 MIPS CPU performance, 32 KB program Flash, 2 KB RAM, and a 1 KB auxiliary Flash block, housed in a 28-pin QFN-S (6x6 mm) package with an exposed thermal pad. The device operates from 3.0 V to 3.6 V and is qualified to the automotive AEC-Q100 standard via its extended-temperature (-40C to +125C) "-E" ordering code suffix. A 16-bit microcontroller (MCU) is a microprocessor core that processes data in 16-bit words, sitting between 8-bit MCUs (lower cost, lower throughput) and 32-bit MCUs (higher performance, larger code). Within the broader microcontroller family, the PIC24H belongs to the Microchip 16-bit PIC24 MCU family -> 16-bit MCU class -> microcontroller -> embedded processor hierarchy. The PIC24HJ32GP202-E/MM is part of the PIC24HJ32GP202/204 sub-family that is pin-compatible with the dsPIC33F DSC family, enabling easy migration when DSP capability is later required. Key features of this part include one 16-bit timer, two UARTs, one SPI, one I2C, a 10-bit ADC with up to 9 channels, a comparator, and 21 digital I/O pins. It uses a 16-bit modified Harvard architecture with a 24-bit instruction word and a variable-length opcode field, achieving 40 MIPS at 40 MHz. Internal Phase-Locked Loop (PLL) support lets a low-frequency external crystal generate the full 40 MIPS CPU clock while reducing system cost. Typical end products are high-friction op-amp driver circuits, motor-control sensor interfaces, automotive body modules, industrial sensor hubs, and low-power instrumentation. When designing with this part, ensure VDDCORE decoupling uses a low-ESR 10 uF bulk + 0.1 uF ceramic pair, and route the exposed thermal pad to a continuous ground plane for thermal dissipation.

Devis Contact

Sous-catégories

Produits (32808)

PIC24HJ16GP304-H/ML - 16-bit 40 MIPS 16KB Flash MCU | Microchip

PIC24HJ16GP304-H/PT - 16-bit 40 MIPS MCU, 16KB Flash | Microchip

PIC24HJ16GP304-I/PT - 40 MIPS 16-bit MCU 16KB Flash 44-TQFP | Microchip

PIC24HJ16GP304T-I/ML - 16-bit 40MIPS MCU, 16KB Flash, 44-QFN | Microchip

PIC24HJ256GP206-I/PT - 16-bit 40MIPS 256KB Flash MCU | Microchip

PIC24HJ256GP206A-E/MR - 16-bit 40MIPS MCU 256KB Flash | Microchip

PIC24HJ256GP206A-I/PT - 16-bit 40 MIPS 256KB Flash MCU | Microchip

PIC24HJ256GP206AT-I/MR - 16-bit 40MIPS 256KB Flash MCU | Microchip

PIC24HJ256GP206AT-I/PT - 40 MIPS 256KB Flash 16-bit MCU | Microchip

PIC24HJ256GP210-I/PF - 16-bit 40MIPS 256KB Flash MCU | Microchip

PIC24HJ256GP210-I/PT - 16-bit 40MIPS 256KB Flash MCU | Microchip

PIC24HJ256GP210A-E/PF - 40 MIPS 16-bit MCU 256KB Flash 100-TQFP | Microchip

PIC24HJ256GP210A-E/PT - 16-bit 40MIPS MCU 256KB Flash | Microchip

PIC24HJ256GP210A-I/PT - 40 MIPS 256KB Flash 16-bit MCU | Microchip

PIC24HJ256GP210AT-I/PF - 16-bit 40MIPS 256KB Flash MCU | Microchip

PIC24HJ256GP210AT-I/PT - 256KB Flash 40MIPS 16-bit MCU | Microchip

PIC24HJ256GP210T-I/PF - 40 MIPS 256KB Flash 16-bit MCU | Microchip

PIC24HJ256GP610A-H/PF - 16-bit 40 MIPS MCU 256KB Flash TQFP-100 | Microchip

PIC24HJ256GP610A-I/PT - 40 MIPS 16-bit MCU 256KB Flash | Microchip

PIC24HJ256GP610AT-I/PF - 40 MIPS 16-bit MCU 256KB Flash 100-TQFP | Microchip

PIC24HJ256GP610AT-I/PT - 40 MIPS 16-bit MCU, 256KB Flash TQFP-100

PIC24HJ256GP610T-I/PF - 40 MIPS 16-bit MCU 256KB Flash | Microchip

PIC24HJ256GP610T-I/PT - 256KB Flash 16-bit MCU 40MIPs TQFP-100 | Microchip

PIC24HJ32GP202-E/MM - 16-bit 40MIPS MCU, 32KB Flash | Microchip