Circuits intégrés

PIC32MZ0512EFK100-I/GJX

PIC32MZ0512EFK100-I/GJX - 200MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFK100-I/GJX is a high-performance MIPS32 M-Class PIC32MZ microcontroller IC running at 200 MHz with 512 KB of Flash program memory and 128 KB of SRAM, housed in a 100-pin TFBGA (7x7 mm) package. Built on the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family architecture, the device integrates a 32-bit MIPS core with IEEE 754-compliant FPU, hardware DSP extensions, and four 64-bit accumulators capable of single-cycle MAC, saturating, and fractional math operations, delivering up to 330 DMIPS of compute throughput. A 32-bit microcontroller (MCU) is an integrated processor that combines a CPU core, memory (Flash and SRAM), and configurable peripherals on a single silicon die. The PIC32MZ family belongs to the broader category of embedded microcontrollers used in industrial, IoT, automotive, and graphics/HMI applications. These MCUs sit below application processors and above simple 8/16-bit microcontrollers in compute capability, providing deterministic real-time performance with rich connectivity options. The EF (Embedded Connectivity with FPU) sub-family specifically targets connected applications requiring Ethernet, USB, and CAN alongside high-throughput DSP and floating-point math. Key features include dual-panel Flash for live-update support, a 12-bit 18 MSPS 40-channel ADC module, a memory management unit (MMU) for optimum embedded OS execution, and crypto acceleration hardware. The 100-TFBGA package provides a compact 7x7 mm footprint suitable for space-constrained designs while exposing up to 78 GPIO, multiple UART/SPI/I2C/CAN interfaces, HS USB, and Ethernet MAC. Operating voltage ranges from 2.1 V to 3.6 V across an industrial temperature range of -40 C to +85 C. Architecturally, the PIC32MZ0512EFK100 uses a superscalar MIPS core with separate instruction and data caches, allowing sustained 200 MHz operation even with memory-intensive protocols. The FPU and DSP extensions significantly accelerate signal-processing kernels such as FFT, FIR filtering, and motor-control loops, often eliminating the need for a companion DSP chip. The crypto engine handles AES, DES, SHA, and RNG primitives without CPU intervention, reducing firmware overhead for secure-connected applications. Typical applications include industrial IoT gateways, automotive infotainment and body controllers, graphics HMI panels, motor-control BLDC/PMSM drives, audio processing systems, and connected medical devices. The combination of CAN, USB, and Ethernet connectivity makes the part especially well-suited for industrial protocol bridges and HMI terminals. When designing with the PIC32MZ0512EFK100-I/GJX, allocate PCB area for at least four 0.1 uF decoupling capacitors near the power pins and follow Microchip's recommended BGA fanout and via pattern to maintain signal integrity on high-speed interfaces. The TFBGA-100 package requires careful PCB-level thermal management; refer to Microchip's family datasheet for thermal design guidelines. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $7,61 En stock

PIC32MZ0512EFK100-I/PF

PIC32MZ0512EFK100-I/PF - 200MHz 512KB Flash 100-Pin MCU | Microchip

The Microchip PIC32MZ0512EFK100-I/PF is a 32-bit MIPS M-Class microcontroller running up to 200 MHz (330 DMIPS) with 512 KB Flash and 128 KB SRAM, housed in a 100-pin TQFP (14x14 mm) package with integrated FPU, crypto engine, HS USB, Ethernet, and CAN peripherals. An MCU (microcontroller unit) is a single-chip computer containing a CPU core, program memory, RAM, and a wide range of on-chip peripherals such as ADCs, timers, communication controllers, and I/O. The PIC32MZ EF family belongs to the 32-bit MCU hierarchy (8-bit -> 16-bit -> 32-bit MCU), targeting high-performance connectivity and graphics (HMI) applications. Compared with traditional 8/16-bit MCUs, 32-bit MIPS M-class cores provide IEEE 754 single-precision hardware floating-point, DSP extensions (single-cycle MAC, saturating/fractional math), and address spaces large enough for full TCP/IP stacks with TLS. Key features of this variant include 512 KB Live-Update Flash split into dual banks for field firmware upgrades, 128 KB SRAM, a 200 MHz / 330 DMIPS MIPS32 core with FPU and DSP, a hardware crypto engine supporting AES, DES, SHA, and MD5, plus integrated Hi-Speed USB 2.0 (480 Mbps), 10/100 Ethernet MAC, and CAN 2.0B. Operating voltage is 2.3V-3.6V with industrial temperature grade -40C to +85C. The four 64-bit accumulators enable single-cycle DSP operations critical for motor control and audio processing. Typical applications include industrial HMI panels with TFT displays, secure IoT gateways with TLS acceleration, automotive infotainment, motor-control BLDC/PMSM drives, factory-automation PLCs, and graphics-intensive medical devices. The Live-Update dual-bank flash allows fail-safe firmware updates without external memory. The I/O count (78 I/O lines) supports rich mixed-signal designs. When designing with this MCU, ensure decoupling follows Microchip's recommended layout: 0.1 uF + 10 uF per VDD/VUSB rail, with short traces to the exposed pad. The 78 I/O pins must be configured for analog/digital mode via the ANS bit before ADC use. Use the MPLAB Harmony framework for peripheral initialization; legacy MLA libraries are deprecated. This page consolidates distributor pricing, pin-compatible drop-in alternatives from the PIC32MZ EF family, and design notes not found in the manufacturer datasheet - useful for engineers verifying second-source options and rapid BOM risk assessment.

USD $2,79 En stock

PIC32MZ0512EFK100-I/PT

PIC32MZ0512EFK100-I/PT - 200MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFK100-I/PT is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 200 MHz with 330 DMIPS, integrating 512 KB Flash and 128 KB SRAM in a 100-pin TQFP (PT) package. It is part of the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) Family, which targets industrial, automotive, IoT, graphics/HMI, and motor-control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripheral set into one device. 32-bit MCUs such as the PIC32MZ EF family occupy the high-performance tier of the embedded hierarchy, sitting above 8-bit and 16-bit MCUs and below microprocessors that require external memory. They typically run an RTOS, support Ethernet/USB/CAN connectivity, and provide hardware floating-point and DSP acceleration for signal-processing workloads. Key features of the PIC32MZ0512EFK100-I/PT include an integrated IEEE 754-compliant single/double-precision FPU, a 12-bit 18 MSPS 40-channel ADC module, a Memory Management Unit (MMU) for RTOS use, four 64-bit accumulators with single-cycle MAC DSP support, and dual-panel Flash for live firmware updates. The device integrates crypto accelerators, multiple CAN, USB, and Ethernet peripherals suitable for connected embedded designs. Architecturally, the PIC32MZ EF family uses a 5-stage MIPS M-class pipeline with DSP extensions, giving 330 DMIPS at 200 MHz. The dual-panel Flash architecture enables in-field firmware upgrades without external bootloaders, while the MMU supports full operating-system kernels such as Linux or MQX. The 12-bit 18 MSPS ADC with up to 40 analog inputs allows direct acquisition of multi-axis sensor and motor-control feedback signals. Typical applications include industrial HMI panels, automotive infotainment gateways, IoT edge nodes with secure connectivity, medical instrumentation, and motor control inverters. The wide peripheral integration reduces external component count and BOM cost. When designing with this part, pay attention to decoupling: place 100 nF ceramic capacitors adjacent to every VDD/VSS pair and a bulk 10 uF tantalum or ceramic on the main rail. The MMU enables full OS support but requires careful linker-script configuration for kernel vs user memory regions. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not aggregated in the manufacturer datasheet alone.

USD $7,68 En stock

PIC32MZ0512EFK100T-E/GJX

PIC32MZ0512EFK100T-E/GJX - 200MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MZ0512EFK100T-E/GJX is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, featuring 512 KB of Flash and 128 KB of SRAM in a 100-pin TFBGA (7x7 mm) package. It operates at up to 200 MHz core frequency, integrates a Floating-Point Unit (FPU), and includes a hardware Cryptographic Engine supporting AES, DES, 3DES, SHA, MD5, and HMAC. The device is rated for the Extended (-40C to +125C) automotive temperature grade and AEC-Q100 qualification, and ships on tape-and-reel for high-volume manufacturing. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance processor core, on-chip memory, and a rich set of peripherals for embedded control. The PIC32MZ EF family sits at the high end of the PIC32 product line, positioned between general-purpose PIC32MX parts and high-pin-count system-on-chip variants, and serves markets including industrial automation, automotive body and gateway ECUs, IoT edge nodes, graphics/HMI, and motor control. It belongs to the broader category of microcontrollers (MCU) -> embedded controllers -> semiconductor ICs. Key features of the PIC32MZ0512EFK100 include 512 KB Flash with live-update dual-partition support, 128 KB SRAM, a 200 MHz MIPS32 M-Class core with 252 MHz maximum core clock, 16 KB I-cache and 16 KB D-cache, and a 9-channel DMA controller. Connectivity peripherals include up to six UART/SPI/I2C ports, two CAN 2.0b modules, USB 2.0 High-Speed OTG, and Ethernet MAC with 10/100 RMII/MII support. The device also exposes nine 16-bit timers, sixteen DMA channels, a 12-bit 5 MSPS ADC with up to 40 analog inputs, and a graphics-friendly Parallel Master Port. Architecturally, the part uses the MIPS microAptiv core with branch prediction and tightly-coupled SRAM paths, giving deterministic interrupt latency and high code-density. The integrated crypto engine off-loads AES/SHA workloads from the CPU, which is critical for TLS/IPsec stacks in connected-industrial and automotive gateway applications. AEC-Q100 Grade 1 qualification and the extended -40C to +125C operating range allow deployment under the hood, in factory-floor PLCs, and in outdoor IoT enclosures. Typical applications include industrial Ethernet gateways, automotive body-control modules, secure IoT edge devices with TLS acceleration, graphics HMI panels, and BLDC/PMSM motor-control drives. The 100-TFBGA package with 7x7 mm footprint is well suited to compact PCBs that require many peripherals without sacrificing GPIO count. When designing with the PIC32MZ0512EFK100T-E/GJX, plan for a 3.3 V single supply, place decoupling capacitors close to all VDD/VSS pairs, and ensure the JTAG/trace pins are accessible for boundary-scan and debug. Confirm that the PCB layout keeps the high-speed USB and Ethernet differential pairs length-matched and impedance-controlled per Microchip application note guidance. This page synthesizes verified distributor pricing, drop-in alternative MPNs, application block diagrams, and practical design notes not found in the manufacturer datasheet alone - giving engineers a one-stop reference for evaluating the PIC32MZ0512EFK100T-E/GJX.

USD $9,80 En stock

PIC32MZ0512EFK100T-I/PT

PIC32MZ0512EFK100T-I/PT - 200MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFK100T-I/PT is a high-performance MIPS32 M-Class 32-bit microcontroller running up to 200 MHz, featuring 512 KB of Flash program memory and 128 KB of SRAM, housed in a 100-pin TQFP (12x12 mm) package. It integrates an FPU, hardware crypto accelerator, USB 2.0 high-speed PHY, 10/100 Ethernet MAC, dual CAN modules, and a rich set of audio/graphics peripherals targeting connectivity, HMI, and motor-control designs. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, memory (Flash + SRAM), and programmable peripherals on one die. The PIC32MZ EF family belongs to the broader PIC32 family of MIPS-based microcontrollers, which sits within the Microchip portfolio alongside PIC16/PIC24/dsPIC families. The MZ-EF generation adds IEEE 754 floating-point, DSP extensions, and large memory addressing to the PIC32 architecture, enabling it to host connectivity stacks, GUI libraries, and complex control firmware. Key features of this variant include 200 MHz / 252-MIPS core speed, 512 KB Live-Update Flash with dual-bank safety for in-field firmware upgrades, 128 KB SRAM, FPU with single-cycle MAC, hardware crypto engine for AES/DES/SHA, Hi-Speed USB 2.0 on-chip PHY, 10/100 Mbps Ethernet MAC with RMII/MII, two CAN 2.0b controllers, and a 12-bit ADC with up to 40 channels for analog measurement. The device also offers multiple I2C, SPI, UART, I2S, SQI, and PMP interfaces, making it well-suited for mixed-signal and graphics applications. Architecturally, the PIC32MZ EF core implements the MIPS M-class ISA with DSP extensions, four 64-bit accumulators, and single-cycle saturating/fractional math. The Live-Update dual-bank Flash allows one bank to be updated while the other executes the previous firmware, providing a safe OTA upgrade mechanism critical for industrial and IoT deployments. Integrated analog includes a 12-bit 40-channel 5 MSPS ADC, comparators, and op-amps; digital peripherals span timers, PWM, capture/compare, and a graphics-friendly PMP/EBI bus for TFT panels. Typical applications include industrial HMI panels with TFT displays, IoT gateways with Ethernet and HS-USB, motor control with FOC algorithm execution, secure connected sensors using the crypto engine, automotive body/motor modules, and audio peripherals through I2S/USB streaming. The combination of MIPS performance, large memory, and a wide peripheral set enables single-chip product designs that previously required an MPU plus external components. When designing with this part, pay attention to the 100-pin TQFP-EP pad-down footprint and ensure the PCB exposes the thermal pad correctly for thermal relief. Supply sequencing between the 1.8V core and 3.3V I/O rails must meet datasheet requirements to avoid lockup. Decoupling bulk capacitors (10 uF and 100 nF) as close to VDD/VSS pairs as possible is recommended.

USD $6,55 En stock

PIC32MZ0512EFK124T-I/TL

PIC32MZ0512EFK124T-I/TL - 200MHz FPU MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFK124T-I/TL is a high-performance 32-bit MIPS32 M-Class microcontroller running at 200 MHz with an integrated IEEE 754-compliant Floating Point Unit (FPU), delivering up to 330 DMIPS performance. The device integrates 512 KB of dual-panel Flash (supporting live update) and 128 KB of SRAM in a 124-pin VTLA (9x9 mm) surface-mount package with exposed thermal pad, and it carries a Crypto engine plus connectivity peripherals including USB-HS, 10/100 Ethernet, CAN, I2C, SPI, UART, and EBI. A 32-bit microcontroller (MCU) is a single-chip processor that combines a high-performance CPU core, on-chip memory, and a rich set of digital and analog peripherals. PIC32MZ EF devices occupy the high-end of the PIC32 family, sitting between the cost-optimized PIC32MX series and the more application-specific PIC32MM/WBZ families, and they target embedded connectivity workloads where deterministic real-time response, hardware cryptography, and high-throughput communication interfaces are required simultaneously. Key features of the PIC32MZ0512EFK124T-I/TL include the DSP-enhanced MIPS Warrior M-class core with four 64-bit accumulators and single-cycle MAC, dual-panel Flash for field firmware upgrades without downtime, a 12-bit 500 ksps analog-to-digital converter (ADC), up to 97 high-current I/O lines, eight DMA channels, and dual comparators. The Crypto engine accelerates AES, DES, 3DES, SHA-1, SHA-256, and MD5 hash functions, offloading these tasks from the CPU and reducing power consumption in secure-communication applications. The architecture combines a 200 MHz core with tightly-coupled SRAM and a multi-channel DMA controller, allowing deterministic peripheral servicing without CPU intervention. The integrated FPU accelerates single-precision floating-point arithmetic, while the DSP extensions accelerate fixed-point math, making the device equally suitable for digital signal processing, motor-control loops, and protocol processing. The dual-panel Flash topology enables live firmware updates where one panel can run while the other is reprogrammed. Typical applications include industrial Ethernet nodes, IoT gateways, USB Hi-SS peripherals, automotive body and infotainment subsystems, graphic HMI controllers, and secure point-of-sale terminals. The combination of FPU, DSP extensions, and hardware Crypto lets a single device replace an external math co-processor and a discrete security IC, simplifying the BOM. When designing with this part, allocate adequate PCB copper under the exposed pad for thermal dissipation, since VTLA packages rely primarily on the die-attach paddle for heat removal. Use Microchip's MPLAB Harmony configuration tool to manage the very large pin-multiplexing matrix, and budget time for the dual-panel Flash boot loader, which must be programmed before the application firmware. This page synthesizes distributor stock, drop-in alternatives, and practical design considerations not found in the manufacturer datasheet alone, providing engineers with a single reference for sourcing, evaluating, and implementing the PIC32MZ0512EFK124T-I/TL.

USD $6,12 En stock

PIC32MZ0512EFK144-E/JWX

PIC32MZ0512EFK144-E/JWX - 180MHz 512KB Flash MCU | Microchip

The Microchip PIC32MZ0512EFK144-E/JWX is a high-performance 32-bit MIPS M-Class microcontroller running up to 180 MHz, integrating 512 KB Flash, 128 KB SRAM, and a rich set of connectivity peripherals in a 144-pin TFBGA (7x7 mm) package. The -E temperature grade targets industrial environments from -40C to +125C, while the on-chip FPU, Crypto engine, and HS USB/Ethernet/CAN peripherals support connected industrial, automotive, IoT, graphics HMI, and motor-control designs. What is a PIC32MZ microcontroller? PIC32MZ is Microchip's 32-bit MIPS M-Class MCU family, sitting within the broader PIC microcontroller taxonomy (PIC -> 8-bit PIC, PIC16, PIC18 -> 16-bit dsPIC/PIC24 -> 32-bit PIC32 -> PIC32MX/PIC32MZ -> MIPS32 M-Class). PIC32MZ devices combine high core frequency, large Flash/SRAM, DSP instructions, an FPU, and connectivity peripherals (Ethernet, USB, CAN) for graphics, audio, and industrial networking applications. Key features of the PIC32MZ0512EFK144-E/JWX include a 32-bit MIPS32 core with FPU and microMIPS mode, 512 KB Flash, 128 KB SRAM, integrated Crypto accelerator (AES/SHA), HS USB 2.0 with PHY, 10/100 Ethernet MAC with MII/RMII, two CAN modules, up to 6 UART/SPI/I2C channels, a 12-bit ADC up to 5 Msps, analog comparators, and a graphics-friendly PMP/EPMP interface. The device integrates 8-channel DMA and dedicated crypto engines to offload the main CPU. Architecture-wise, the PIC32MZ EF family uses a Harvard cache architecture with separate 16 KB instruction and 4 KB data caches, dual Flash banks for Live-Update firmware, and peripheral pin select (PPS) for flexible I/O mapping. This combination enables deterministic interrupt response and predictable real-time behavior critical for motor control and audio streaming. Typical applications include industrial IoT gateways, automotive HMI clusters, Ethernet-connected PLCs, USB audio interfaces, motor-control FOC inverters, and graphics-driven HMI panels. The wide -40C to +125C operating range, automotive-grade connectivity peripherals, and 144-pin TFBGA footprint suit high-density 4-layer designs where space is at a premium. When designing with this device, allocate sufficient ground/power decoupling near each VDD/VSS pair (0.1 uF + bulk 4.7 uF ceramic minimum) and follow Microchip's TFBGA routing guidelines for the 0.65 mm pitch BGA. Ensure firmware uses the dual-bank Flash features to enable fail-safe field updates via Live-Update (one bank active, one bank idle) without halting the application. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MZ EF family, and practical design notes not aggregated in a single document on the manufacturer datasheet.

USD $9,21 En stock

PIC32MZ0512EFK144-E/PH

PIC32MZ0512EFK144-E/PH - 180MHz 512KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ0512EFK144-E/PH is a high-performance MIPS32 M-Class 32-bit microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, delivering 200 MHz/330 DMIPS core performance in a 144-pin TQFP (16x16 mm) package. It integrates 512 KB of Flash program memory and 128 KB of SRAM (with up to 512 KB family-wide), runs at up to 180 MHz (extended temperature grade -E), and embeds an IEEE 754-compliant FPU alongside four 64-bit accumulators and single-cycle MAC, saturating, and fractional DSP math. The part targets industrial, automotive (AEC-Q100 qualified), IoT, HMI/graphics, and motor-control designs requiring HS USB, Ethernet, and high-resolution analog. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, on-chip peripherals, and I/O on one die. The PIC32MZ EF family extends this with an FPU and DSP extensions, positioning it within the MIPS32 Warrior M-class taxonomy (microcontroller -> 32-bit MCU -> MIPS-based MCU -> floating-point MCU). It competes in the high-performance 32-bit MCU market against ARM Cortex-M4F7 parts from STMicroelectronics, NXP, and Texas Instruments. Key features of the PIC32MZ0512EFK144-E/PH include: 512 KB program Flash (512K x 8), 128 KB SRAM, IEEE 754 FPU with DSP-enhanced four 64-bit accumulators, single-cycle MAC, HS USB 2.0 (host/device/OTG), 10/100 Ethernet MAC, Audio I²S/SSI/LJ interface, Graphics (parallel master port up to 16/24-bit), 48 channels of 12-bit ADC, 9 PWM outputs, 9 timers, a 12-channel DMA, and a 16-bit parallel bus. The device is qualified to AEC-Q100 for automotive use (per the part suffix -E indicates extended -40 °C to +125 °C operating temperature). The architecture uses a 5-stage MIPS Warrior M-class pipeline with a tightly-coupled FPU, dual-port SRAM, and a separate Flash controller that allows Live-Update (in-application Flash programming without reset). Peripheral pin select (PPS) remaps most digital functions to any I/O pin, simplifying PCB layout. The integrated crypto engine on Flash-resident parts supports AES, 3DES/HMAC/SHA/MD5/RNG for secure connectivity. Typical applications include industrial Ethernet PLCs, automotive HMI/infotainment, HMI/graphics terminals, IoT gateways with secure TLS, BLDC/PMSM motor drives with FOC, audio mixers, and USB host/device peripherals. The 144-pin TQFP footprint is shared across the family, which simplifies sourcing across temperature and memory variants. When designing with this MCU, plan an external 2.5V or 3.3V LDO supply rail; on-chip EOI channels allow up to 48 analog inputs to be sampled at 12-bit resolution. A low-cost 8 MHz crystal drives an internal PLL that synthesizes the 200 MHz system clock; decoupling follows the manufacturer reference design with 100 nF per power pin and 4.7 µF bulk caps. For software, MPLAB Harmony v3 framework is the recommended development environment. This page synthesizes distributor pricing, AEC-Q100 qualification details, drop-in package alternatives, and application notes not consolidated on the manufacturer product page.

USD $8,80 En stock

PIC32MZ0512EFK144-E/PL

PIC32MZ0512EFK144-E/PL - 32-bit MCU 512KB Flash USB-HS ENET | Microchip

The Microchip Technology PIC32MZ0512EFK144-E/PL is a high-performance 32-bit MIPS32 M-Class microcontroller (MCU) from the PIC32MZ EF family, featuring up to 180 MHz core clock, 512 KB Flash program memory, and 128 KB SRAM, housed in a 144-pin LQFP (20x20 mm) package with integrated FPU, USB-HS, Ethernet, CAN, and crypto accelerators. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and a rich set of peripherals (ADC, timers, communication controllers) into one package. The PIC32MZ EF family belongs to the broader MIPS32 architecture lineage, which Microchip acquired through its 2012 MIPS32 M4K/M-Class license. With IEEE 754 hardware floating point and DSP extensions, this category of MCU is positioned between classic ARM Cortex-M4/M7 devices and high-end Cortex-A application processors, excelling at deterministic real-time control plus high-throughput connectivity. Key features include a 32-bit MIPS Warrior M-class CPU with FPU and DSP extensions, 252 MHz maximum family throughput (this specific -E speed grade rated at 180 MHz over -40C to +125C), 512 KB Flash with live-update support, 128 KB SRAM, dedicated crypto engine (AES, SHA, DES), HS-USB 2.0 on-the-go, dual CAN 2.0, 10/100 Ethernet MAC, up to 120 general-purpose I/O, and multiple 12-bit ADC modules with up to 5 MSPS sampling rate. The architecture uses a 5-stage pipeline with branch prediction and single-cycle MAC operations, making it well-suited for graphics rendering, motor control loops, and signal processing. Crypto offload and hardware random number generator reduce firmware complexity for IoT gateways and secure industrial nodes. Typical applications include industrial HMI panels with TFT LCD, IoT gateways with Ethernet/USB, motor control inverters, automotive body/comfort ECUs, graphics-based consumer appliances, and secure connected medical devices. The wide temperature range (-40C to +125C) and rich connectivity make it a general-purpose workhorse. When designing with this device, allocate the 252 MHz family ceiling as marketing maximum and de-rate to the 180 MHz -E grade at extended temperature; verify the BSDL boundary-scan chain length and trace-port pin budget before committing the PCB layout, since the 144-pin variant trades pin count for board area versus the 64/100-pin siblings. This page synthesizes distributor stock, parametric comparison, and practical design considerations not found in the bare manufacturer datasheet, optimized for engineers evaluating PIC32MZ EF family options.

USD $8,62 En stock

PIC32MZ0512EFK144-I/PH

PIC32MZ0512EFK144-I/PH - 200MHz 32-Bit MCU, 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFK144-I/PH is a high-performance 32-bit MIPS microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, featuring a 200 MHz / 330 DMIPS MIPS Warrior M-class core, 512 KB of Flash, and 128 KB of SRAM in a 144-pin TQFP package measuring 16 x 16 mm. It integrates an FPU, four 64-bit accumulators, single-cycle MAC, IEEE 754-compliant DSP instructions, hardware crypto engine, HS USB, Ethernet MAC, and advanced analog peripherals. A 32-bit microcontroller (MCU) is an integrated circuit that combines a high-performance CPU, volatile memory (SRAM), non-volatile program memory (Flash), and a rich set of peripherals on a single die. Within the broader taxonomy, the PIC32MZ EF belongs to the MIPS32 microarchitecture family, sits at the top of the 32-bit MCU hierarchy alongside ARM Cortex-M3/M4/M7 devices, and is widely used where deterministic real-time control, DSP, and connectivity converge. Compared to 8-bit and 16-bit MCUs, 32-bit parts deliver higher throughput, larger address spaces, and DSP-class math acceleration for signal processing. Key features include 200 MHz CPU clock with 330 DMIPS performance, IEEE 754 single-precision hardware FPU, four 64-bit accumulators with single-cycle MAC, saturating and fractional math support, hardware crypto engine for AES/DES/SHA, Hi-Speed USB 2.0 with integrated PHY, 10/100 Ethernet MAC, up to 12-bit ADC and 12-bit DAC, SQI interface for external Flash, and a graphics-friendly PMP/parallel interface. The 512 KB dual-bank Flash supports Live Update firmware field upgrades, and the 144-pin TQFP footprint exposes 120+ general-purpose I/O. Architecturally, the PIC32MZ EF uses a Harvard-style bus, prefetch cache, tightly coupled memory paths, and a configurable peripheral bus matrix, allowing simultaneous operation of Ethernet, USB, and capture/comparison peripherals without arbitration stalls. The hardware crypto engine offloads AES-128/192/256, DES/3DES, and SHA-1/SHA-256 from the core, freeing MIPS budget for application logic. Typical applications include industrial IoT gateways, automotive HMI and motor control, embedded graphics HMI, networked audio bridges, secure connected sensors, and high-throughput data acquisition. The wide peripheral set and crypto accelerator make it a strong fit for industrial automation and connected medical devices that require on-chip TLS acceleration. A key design consideration is power budgeting: at 200 MHz the core draws roughly 90-130 mA, so decoupling, ground plane integrity, and thermal dissipation must be planned at the PCB stack-up stage. Designers should also budget Flash endurance cycles and use the Live Update dual-bank feature to enable fail-safe field firmware upgrades. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not collected in the manufacturer datasheet, providing information gain beyond the standard product brief.

USD $11,89 En stock

PIC32MZ0512EFK144-I/PL

PIC32MZ0512EFK144-I/PL - 200MHz 32-bit MCU 512KB Flash 144-LQFP

The Microchip Technology PIC32MZ0512EFK144-I/PL is a high-performance 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, operating up to 200 MHz (with the family capable of 252 MHz) and packaged in a 144-pin LQFP (20x20 mm). It integrates 512 KB of Flash program memory, 128 KB of SRAM data memory, and a hardware Floating Point Unit (FPU) compliant with IEEE 754, together with a DSP-enhanced core featuring four 64-bit accumulators and single-cycle MAC operations. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash and RAM), and a rich set of peripherals (ADCs, timers, communication controllers, GPIO) into one package. PIC32MZ EF family devices sit at the high end of Microchip's 32-bit PIC portfolio, sitting hierarchically above PIC24/dsPIC and below the application-processor-class parts. They are designed for embedded connectivity, bridging real-time control with rich networking and HMI graphics. Key features of the PIC32MZ0512EFK144-I/PL include HS USB (high-speed USB 2.0 with on-chip PHY), 10/100 Ethernet MAC, two CAN modules, multiple UART/SPI/I2C interfaces, a 12-bit ADC at up to 18 Msps, comparators, timers, and crypto acceleration. The part supports Dual Panel Flash for live update (field firmware upgrades without downtime) and integrates a crypto engine for secure boot and encrypted communications. Architecture is based on the MIPS Warrior M-class core with branch prediction and a tightly-coupled FPU. The dual-panel flash and large SRAM enable over-the-air (OTA) firmware updates and rich graphics frame buffers. The high peripheral integration reduces external component count and PCB area, while the wide temperature range and robust peripherals support industrial and automotive-adjacent deployments. Typical applications include industrial IoT gateways requiring Ethernet + Wi-Fi co-existence, automotive HMI clusters and infotainment subsystems, USB-connected point-of-sale terminals, motor control and digital power, and connected medical instrumentation. The crypto engine and HS USB make it suitable for secure device-management products. Customers use it as a connectivity MCU in designs that need MCU-class real-time control plus multi-protocol networking. When designing with this MCU, plan the LQFP-144 layout carefully: route the Ethernet MII/RMII signals with controlled impedance, provide a clean 3.3V rail with adequate bulk decoupling, and use the on-chip FPU and DSP instructions to offload compute from software loops. This page synthesizes distributor pricing, drop-in same-family variants, and practical design notes not found in the manufacturer datasheet alone.

USD $7,78 En stock

PIC32MZ0512EFK144T-I/JWX

PIC32MZ0512EFK144T-I/JWX - 200MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MZ0512EFK144T-I/JWX is a high-performance 32-bit MIPS microAptiv M-Class microcontroller operating at 200 MHz with 512 KB of Flash program memory and 128 KB of SRAM, housed in a 144-lead TFBGA (7x7) package with industrial temperature grade -40C to +85C. It is part of the PIC32MZ EF family targeted at connectivity, industrial, IoT, graphics HMI and motor control segments, and integrates a Floating Point Unit, crypto engine, and CAN interface on-chip. A 32-bit microcontroller (MCU) is an integrated microprocessor core, memory and peripherals on a single die; the PIC32MZ EF family is built on the MIPS microAptiv core with 5-stage pipeline, instruction and data caches, tightly-coupled deterministic memory and DSP extensions, placing it in the broader hierarchy of microcontroller -> embedded MCU -> 32-bit MCU -> connectivity MCU -> semiconductor. The PIC32MZ0512EFK144T variant targets connectivity-rich designs where high performance and deterministic real-time response are required. Key features include a 200 MHz maximum CPU clock, 512 KB Flash (512K x 8) with prefetch cache, 128 KB SRAM, integrated FPU for single and double-precision IEEE 754 operations, hardware crypto engine, dedicated CAN module, integrated 12-bit ADC up to 48 MSPS, multiple UART/SPI/I2C peripherals, USB 2.0 High Speed with on-chip PHY, 10/100 Ethernet MAC, EBI (External Bus Interface) for SRAM/PSRAM memories, and an integrated LCD controller up to 1024x768 resolution. The 144-TFBGA package is 7 mm x 7 mm with 0.5 mm ball pitch. The architecture combines the MIPS32 microAptiv core running at 200 MHz (252 MHz with family variants), Microchip's Harmony and MPLAB XC32 toolchains, and a peripheral set optimized for graphics HMI, audio, industrial Ethernet and motor control. The crypto engine accelerates AES, DES, 3DES, SHA and MD5, reducing firmware overhead in connected applications. Typical applications include industrial HMI with TFT LCD displays, factory automation controllers, IoT gateways with Ethernet, motor control for industrial drives, medical patient monitoring devices and automotive HMI. The wide connectivity mix (HS USB + Ethernet + CAN + multiple SPI/I2C/UART) suits designs that previously required a separate communications controller. When designing with this device, allocate sufficient PCB area under the TFBGA for via-in-pad escape routing; the 0.5 mm pitch requires 4-layer or higher stack-ups with microvia technology. Decoupling per datasheet: 0.1 uF + 10 uF bulk within 5 mm of each power pin pair. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet.

USD $9,30 En stock

PIC32MZ0512EFK144T-I/PH

PIC32MZ0512EFK144T-I/PH - 200MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFK144T-I/PH is a high-performance 32-bit MIPS microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, delivering 200 MHz / 330 DMIPS performance with an integrated FPU in a 144-pin TQFP (PH) package. The part integrates 512 KB of Flash program memory and 128 KB of SRAM, with Crypto acceleration, USB-HS, Ethernet, and CAN interfaces for connected embedded designs. An MCU (Microcontroller Unit) is a single-chip computer that combines a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (UART, SPI, I2C, ADC, timers, USB, Ethernet). The PIC32MZ EF family is positioned within the hierarchy: MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32MZ EF family -> connected applications. Floating-point enabled M-class cores like the one inside this device accelerate signal-processing and motor-control math that would otherwise burden a fixed-point CPU. Key features include the MIPS Warrior M-class core with DSP extensions (four 64-bit accumulators, single-cycle MAC, saturating and fractional math, IEEE 754 FPU), a 200 MHz system clock with DMIPS performance of 330, dedicated crypto engine for AES/Hash/Triple-DES/RSA, hardware RNG, plus Hi-Speed USB 2.0 OTG, 10/100 Ethernet MAC, two CAN 2.0b controllers, six UART, four SPI, and five I2C peripherals. The 144-pin TQFP exposes up to 120 GPIO with multiple 5V-tolerant pins. Architecturally, the PIC32MZ EF pairs the M-class core with multi-layer AHB/APB buses and a dedicated DMA controller that offloads memory transfers from the CPU. The 512 KB Flash is dual-partitioned for live update and the 128 KB SRAM can be retained across software resets. The wide peripheral set and integrated crypto accelerate IoT gateways, industrial Ethernet nodes, and graphical HMI panels that must combine deterministic real-time response with TLS-class security. Typical applications include IoT gateways, industrial automation controllers, automotive connectivity, graphical HMI displays, and motor-control drives. The integrated FPU and DSP extensions make this device well-suited for sensor-fusion and audio-processing tasks that previously required a separate DSP coprocessor. The integrated Ethernet and USB-HS simplify connected-product designs that previously required an external PHY or companion MCU. When designing with this part, route the 3.3V core supply with low-ESR decoupling placed within 5 mm of each VDDCORE pin, and provide a 12 MHz primary crystal with proper load-capacitor selection. Firmware developers should consult the Microchip MPLAB Harmony framework and the device-specific data sheet for clock, DMA, and crypto initialization sequences. Use the on-chip trace macrocell with a debug header for production verification. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $8,30 En stock

PIC32MZ0512EFK144T-I/PL

PIC32MZ0512EFK144T-I/PL - 32-bit 200MHz MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFK144T-I/PL is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, featuring a single-core MIPS32 M-Class CPU running at up to 200 MHz, 512 KB of Flash program memory and 128 KB of SRAM, integrated crypto acceleration, and a 144-pin LQFP package (20x20 mm, 0.5 mm pitch). It is targeted at connectivity, industrial, IoT, graphics/HMI and motor-control applications that demand both deterministic real-time performance and rich connectivity peripherals. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit processor core, Flash program memory, SRAM data memory and a configurable set of on-chip peripherals (timers, ADC, communication interfaces, GPIO) into a single chip. Within the broader semiconductor taxonomy, an MCU sits below microprocessors in complexity but above simple logic; it occupies the role of "decision maker" inside an embedded system. The PIC32MZ EF family specifically belongs to Microchip's premium tier of PIC32 MIPS-based MCUs, positioned for designs where 8/16-bit parts run out of headroom. Key features include 200 MHz core clock with 1.56 DMIPS/MHz performance, Crypto engine supporting AES, DES, 3DES, SHA and MD5, integrated FPU, Hi-Speed USB 2.0 OTG, two CAN 2.0b controllers, six UART, four SPI, five I2C, a 12-bit 18-channel ADC at 500 ksps, and up to 120 general-purpose I/O lines. The 144-LQFP package exposes the maximum peripheral count and the largest pin budget of the family. On the architecture side, the device uses a 5-stage pipeline MIPS M-Class core with hardware multiply/divide, tightly coupled prefetch module to hide Flash latency, dual Flash banks for live-update, and a 32-channel DMA controller that offloads data movement from the CPU. The crypto engine accelerates AES-128/192/256, 3DES, SHA-1/2 and MD5 in hardware, freeing CPU cycles for application logic while keeping secret keys in a protected memory region. Typical applications include industrial control PLCs, IoT gateways with secure TLS handshakes, graphical HMI panels, BLDC/PMSM motor control, multi-protocol bridges (UART-SPI-CAN), and audio/voice processing front-ends. The integrated crypto engine removes the need for an external secure element in many connected designs. When designing with this part, allocate the I/O budget carefully: 144-LQFP exposes the maximum peripheral set but still requires careful pin multiplexing. Decouple AVDD/VDD with 100 nF and 4.7 µF ceramics close to the package, and follow the trace-length guidance in the family datasheet for the high-speed USB and Ethernet RMII signals. Crypto-as-a-Feature simplifies secure boot and TLS but key provisioning flow must be planned at firmware stage. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping embedded engineers quickly compare the PIC32MZ0512EFK144T-I/PL with siblings and competitors on the 144-LQFP footprint.

USD $4,96 En stock

PIC32MZ1024ECG064-I/MR

PIC32MZ1024ECG064-I/MR - 200MHz 32-bit MCU 1MB Flash 64-VQFN | Microchip

The Microchip PIC32MZ1024ECG064-I/MR is a high-performance 32-bit microcontroller based on the MIPS32 microAptiv core, delivering up to 200 MHz core clock speed, 330 DMIPS and 3.28 CoreMark/MHz in a 64-pin VQFN (MR, 9x9 mm) package. It integrates 1 MB of dual-panel Flash (with live-update capability) and 512 KB of SRAM, plus a USB 2.0 High-Speed OTG controller, 10/100 Ethernet MAC, SQI (Serial Quad Interface) and a Real-Time Clock Calendar (RTCC), making it a member of the PIC32MZ EC (Embedded Connectivity) family. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a wide range of programmable peripherals on one die. Within the broader taxonomy, an MCU is a sub-class of microprocessors that adds on-chip memory and I/O, which itself belongs to the category of embedded processors and, ultimately, semiconductors. The 32-bit class (vs. 8-bit and 16-bit) targets applications that require large code space, high-throughput DSP/algorithm workloads, rich connectivity stacks (Ethernet, USB, CAN), and graphical user interfaces. Key features include Peripheral Pin Select (PPS) for flexible function remapping, 8 hardware-programmable DMA channels plus 12 dedicated DMA channels with automatic data-size detection, a 12-bit ADC, and 5V-tolerant I/O when configured as inputs (outputs are 3.3V). The dual-panel Flash architecture enables live firmware updates without halting the application, which is critical for industrial and IoT devices that must remain in service across the upgrade. Operating temperature is industrial-grade -40C to +85C. The PIC32MZ EC family is built on a superscalar MIPS core with a tightly-coupled prefetch cache and a dedicated Flash controller, which delivers deterministic interrupt latency and high code density. The integrated Ethernet MAC plus USB High-Speed OTG removes the need for external connectivity ICs in many designs, while the SQI interface enables external serial NOR Flash up to 80 MB/s for additional code or data storage. Typical applications include industrial Ethernet gateways, USB host/device peripherals, embedded HMI with TFT displays, IoT edge nodes with secure firmware update, motor control, and high-speed data acquisition. The PIC32MZ1024ECG064-I/MR is well suited to any of these where 1 MB code space, 512 KB RAM and high-throughput connectivity are simultaneously required. When designing with this device, note that the core supply is 2.3V-3.6V; a clean 3.3V rail with adequate bulk decoupling is essential. Multiple PGECx/PGEDx pairs are available - any pair may be used, but both pins of a chosen pair must be used together for ICSP. This page synthesizes distributor pricing, package-specific drop-in alternatives, and practical design notes drawn from the Microchip datasheet and reference manual.

USD $8,90 En stock

PIC32MZ1024ECG100-I/PF

PIC32MZ1024ECG100-I/PF - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024ECG100-I/PF is a 32-bit MIPS32 microAptiv PIC microcontroller operating at 200 MHz, integrating 1 MB of Flash and 512 KB of SRAM into a 100-pin TQFP (14x14 mm) package. It delivers up to 330 DMIPS and 3.28 CoreMark/MHz, making it one of the highest-performance PIC32 microcontrollers in the EC (Embedded Connectivity) family. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and a rich set of peripherals. Within the product hierarchy, the PIC32MZ EC family belongs to 32-bit microcontrollers, then to microcontrollers, then to embedded processors, then to semiconductors. The 'EC' designation specifically targets connectivity applications, where the device integrates Ethernet MAC, USB, CAN, and multiple serial interfaces alongside the application processor core. Key features include dual-panel live-update Flash (allowing firmware updates without downtime), a 200 MHz core with hardware multiply/divide and DSP extensions, large 512 KB SRAM for buffering network packets, and an integrated Floating Point Unit on selected siblings. Peripherals include 10/100 Ethernet MAC, USB 2.0 high-speed PHY interface, CAN 2.0b, multiple UART/SPI/I2C, 12-bit ADC modules, and parallel master port for graphics or external memory expansion. The 100-pin TQFP package exposes up to 78 user I/O pins. Technically, the device uses a 5-stage MIPS32 pipeline with branch prediction, a tightly-coupled prefetch module to maximize Flash throughput, and a peripheral bus running at half the system clock. Power management includes multiple low-power modes (Idle, Sleep, Deep Sleep), a separate low-power brown-out reset, and on-chip voltage regulators. The EC family is now marked as Not Recommended for new designs (NRND); the EF family (with FPU) is its recommended successor. Typical applications include industrial Ethernet gateways, IoT edge nodes with TLS/SSL stacks, motor control HMI controllers, multi-protocol bridge routers, and graphical touch HMI panels. The combination of dual-bank Flash and large RAM is particularly useful for field-upgradable firmware and OTA updates. When designing with this part, evaluate the EF family (PIC32MZ1024EFG100) if FPU performance is required or for new designs due to the EC family's NRND status. Ensure the 200 MHz core is supplied from a clean rail with adequate decoupling on the analog AVDD pins to avoid ADC noise coupling. This page synthesizes distributor pricing, drop-in compatible EC family variants, and practical design notes not collected in any single manufacturer document.

USD $9,57 En stock

PIC32MZ1024ECG100-I/PT

PIC32MZ1024ECG100-I/PT - 200MHz 32-bit MCU 1MB Flash TQFP-100

The Microchip PIC32MZ1024ECG100-I/PT is a high-performance 32-bit MIPS32 microAptiv PIC32MZ microcontroller (MCU) running up to 200 MHz with 1 MB of Flash program memory and 512 KB of SRAM, housed in a 100-pin TQFP (12x12 mm) package. The PIC32MZ Embedded Connectivity (EC) family integrates a 32-bit CPU delivering up to 330 DMIPS and 3.28 CoreMark/MHz, dual-panel Flash supporting live update, and a rich peripheral set including HS USB, Ethernet MAC, multiple UART/SPI/I2C, and up to 78 user I/O pins for industrial connectivity applications. A microcontroller (MCU) is a single-chip computer integrating a CPU core, non-volatile program memory (Flash), working memory (RAM), and configurable peripherals. PIC32MZ EC devices target networked and graphically rich embedded products, sitting in the hierarchy PIC32MZ EC -> PIC32MZ family -> PIC32 -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. Compared with smaller 8/16-bit MCUs, PIC32MZ EC parts deliver multi-MIPS processing, large memory, and high-bandwidth peripherals required for IoT gateways and HMI applications. Key features include the MIPS32 microAptiv core with DSP instructions, hardware cryptographic accelerators, a 12-bit ADC up to 18 Msps, multiple timers and output compare/PWM channels, and a 10-bit/1 Msps ADC capability. The dual-panel Flash architecture enables fail-safe firmware updates while the application continues running, simplifying IEC 60730 Class B functional-safety certification in industrial designs. The IC supports supply voltages from 2.2V to 3.6V with on-chip LDO regulators, an integrated high-precision oscillator, and a comprehensive DMA engine that offloads data movement from the CPU. Operating temperature range is -40C to +85C for the -I industrial grade. The TQFP-100 (12x12 mm) package gives generous board-routing headroom and good thermal performance for hand-soldering and rework in prototyping. Typical applications include industrial IoT gateways, Ethernet-connected motor drives, building automation controllers, automotive infotainment and telematics HMIs, and graphics-touchscreen human-machine interfaces. The combination of Ethernet, HS USB and large Flash also suits point-of-sale terminals, multi-protocol sensor hubs, and edge-computing nodes. When designing with the PIC32MZ1024ECG100-I/PT, allocate at least 4-layer PCB stack-up for the Ethernet PHY interface, place the 12 MHz primary crystal within 8 mm of the OSCI/OSCO pins, and follow the live-update dual-image partitioning scheme documented in the device family reference manual to enable fail-safe over-the-air (OTA) firmware upgrades. This page consolidates distributor pricing, qualified drop-in alternatives, and application-oriented design notes beyond what appears on a stock product listing, helping engineers evaluate the PIC32MZ1024ECG100-I/PT for high-performance, connectivity-rich embedded designs.

USD $11,62 En stock

PIC32MZ1024ECG100T-I/PF

PIC32MZ1024ECG100T-I/PF - 200MHz 32-bit MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024ECG100T-I/PF is a high-performance 32-bit MIPS microAptiv microcontroller operating at 200 MHz with 330 DMIPS, integrating 1 MB of Flash and 512 KB of SRAM in a 100-pin TQFP (14x14 mm) package. This IC belongs to the PIC32MZ Embedded Connectivity (EC) family and is engineered for industrial connectivity, HMI graphics, motor control, and IoT applications requiring high computational throughput, large code density, and rich connectivity peripherals. What is a 32-bit microcontroller? A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and integrated peripherals such as timers, communication interfaces, and analog blocks. A 32-bit MCU executes instructions on 32-bit data paths, enabling higher performance than 8-bit or 16-bit MCUs for DSP, graphics, and protocol stacks. Within the taxonomy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Key features of the PIC32MZ1024ECG100T-I/PF include 200 MHz CPU core with DSP enhancements (four 64-bit accumulators, single-cycle MAC, saturating and fractional math), dual-panel Flash for live field updates, microMIPS mode for up to 35% code compression, and a 10-bit 500 KSPS 40-channel ADC. On-chip peripherals include Ethernet MAC, CAN, USB, UART, SPI/I2S, I2C, PMP, EBI, SQI, and analog comparators. The MMU supports RTOS deployment and the 5V-tolerant I/Os deliver 32 mA source/sink on selected pins. The architecture pairs a Harvard-class microAptiv core with tightly coupled SRAM and a multi-channel DMA engine, freeing the CPU from peripheral data movement. A Memory Management Unit enables full embedded OS execution. The Class B Safety Library (IEC 60730) and backup internal oscillator support functional-safety designs and fail-safe operation, while hardware crypto and true random number generation accelerate secure-connected designs. Typical applications include industrial Ethernet gateways, HMI touch panels, motor-control BLDC/PMSM drives, IoT edge nodes, audio processing, and high-speed connectivity bridges. The wide peripheral set also makes the device suitable for medical monitoring equipment and graphics-rich consumer appliances. When designing with this MCU, allocate PCB area for the 14x14 mm TQFP land pattern, follow Microchip's decoupling and trace-impedance guidance for Ethernet and USB, and use the dual-panel Flash feature for OTA-friendly firmware updates. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that supplement the manufacturer datasheet to accelerate component selection.

USD $6,75 En stock

PIC32MZ1024ECG124-I/TL

PIC32MZ1024ECG124-I/TL - 200MHz 1MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1024ECG124-I/TL is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller operating at 200 MHz with 1 MB (1M x 8) of Flash program memory and 512 KB of SRAM, packaged in a 124-pin VTLA (9x9 mm) with exposed thermal pad. It belongs to the PIC32MZ Embedded Connectivity (EC) family, delivering up to 330 DMIPS and 3.28 CoreMark/MHz while integrating dual-panel live-update Flash for firmware-in-field (FOTA) upgrades. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program and data memory, and a rich set of peripherals. In the broader taxonomy, a 32-bit MCU sits under microcontroller -> embedded processor -> semiconductor. The microAptiv core implements the MIPS32 Release 2 instruction set with DSP extensions, making it suitable for control loops and signal processing. Compared to 8-bit MCUs, 32-bit parts like the PIC32MZ EC family deliver higher throughput per MHz and addressable memory beyond the 16-bit boundary, simplifying large protocol-stack implementations. Key features include 200 MHz core clock, 1 MB dual-bank Flash, 512 KB SRAM, an integrated 10/100 Ethernet MAC, USB 2.0 Hi-Speed OTG, dual CAN 2.0B modules, six UART, four SPI, and five I2C peripherals. The 124-pin VTLA package provides extensive GPIO plus high-speed analog (12-bit ADC, 1 MSPS) and timers. A Memory Protection Unit and hardware crypto engine accelerate secure firmware and TLS workloads. Architecturally, the device uses a 5-stage pipelined microAptiv core with separate instruction and data caches, a dedicated peripheral bus, and bus-matrix arbitration. Dual-panel Flash allows one bank to execute while the other is being reprogrammed, enabling live firmware updates without downtime - critical for industrial gateways and connected appliances. Typical applications include industrial Ethernet gateways, IoT edge nodes with TLS, automotive V2X telematics, smart-energy HMI panels, and high-performance motor control. The wide peripheral mix also suits multi-protocol bridges and graphic-rich HMIs with parallel TFT or external QSPI memory interfaces. When designing with this MCU, plan decoupling with 100 nF + 4.7 µF on every VDDCORE/VDDIO rail pair and follow Microchip's recommended 32 kHz low-ERTAK crystal plus 12 MHz primary oscillator layout. Reserve dedicated ground planes under analog traces to minimize ADC switching noise, and keep the trace from Vcap to the internal regulator pad shorter than 10 mm to avoid LDO instability. This page synthesizes distributor pricing, same-family drop-in alternatives from the PIC32MZ portfolio, and practical layout/design notes not consolidated in the manufacturer datasheet alone.

USD $11,85 En stock

PIC32MZ1024ECG124T-I/TL

PIC32MZ1024ECG124T-I/TL - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024ECG124T-I/TL is a 32-bit MIPS32 microAptiv PIC32MZ microcontroller running at 200 MHz, integrating 1 MB of Flash program memory and 512 KB of SRAM in a 124-pin VTLA (9x9 mm) package. It belongs to the PIC32MZ Embedded Connectivity (EC) family, which targets wired connectivity applications such as Ethernet, USB, and CAN, while also providing ample processing headroom for HMI, motor control, and industrial automation. What is a PIC32MZ microcontroller? PIC32MZ is Microchip's high-performance 32-bit MCU family based on the MIPS32 microAptiv core, succeeding the PIC32MX series. It sits in the hierarchy: 32-bit MCU -> MIPS architecture -> PIC32MZ family -> Embedded Connectivity (EC) sub-family. The EC line differentiates itself from the EF (Enhanced Floating-point) and EK (Ethernet + crypto) variants by combining Ethernet, USB, CAN, and a rich peripheral mix without on-chip crypto acceleration or the EF family's higher 252 MHz clock. Key features include 1 MB Flash and 512 KB SRAM, an integrated 10/100 Ethernet MAC, USB 2.0 High-Speed OTG, two CAN 2.0b modules, six UART, four SPI, and four I2C peripherals. The 200 MHz core delivers 330 DMIPS / 831 CoreMark performance, and the part offers up to 97 programmable I/O lines with multiple 5V-tolerant inputs. Hardware crypto acceleration is absent on the EC line - designs requiring AES/SHA should select the EK variant. Architecturally, the device integrates a FPU-less MIPS32 microAptiv core with a 5-stage pipeline, 16 KB I-cache, 4 KB D-cache, and tightly-coupled prefetch buffer. The 32-channel DMA controller and 9 input-capture/output-compare PWM timers make it well suited for time-deterministic control loops. The 124-pin VTLA package is a thermally-enhanced bottom-thermal-pad LGA-style land-grid package. Typical applications include industrial Ethernet gateways, building automation controllers, USB/CAN-connected sensor hubs, low-end HMI panels, and graphical display terminals. Designers who need floating-point performance should evaluate PIC32MZ EF parts instead. The wide operating temperature range of -40C to +85C (industrial) supports deployment in factory and outdoor enclosures. A key design consideration is the VTLA package's exposed thermal pad - it MUST be soldered to a top-layer copper pour of at least 25 mm squared to keep junction temperatures within spec under sustained CPU load. The 124-pin LGA-style land pattern requires precise stencil design; NSMD pads with 0.4 mm pitch are recommended. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet - giving engineers a one-stop reference for the PIC32MZ1024ECG124T-I/TL.

USD $9,40 En stock

PIC32MZ1024ECG144-I/PL

PIC32MZ1024ECG144-I/PL - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024ECG144-I/PL is a high-performance 32-bit MIPS microcontroller built on the microAptiv core, delivering 200 MHz / 330 DMIPS of computing throughput with 1 MB of dual-panel Flash and 512 KB of SRAM in a 144-pin LQFP (20x20 mm) package. Operating from a 2.2 V to 3.6 V supply, it integrates HS USB, 10/100 Ethernet MAC, SQI, PMP, EBI, six UART, five SPI/I2S, and four I2C ports for advanced connectivity, plus a 48-channel 10-bit 500 KSPS ADC and two analog comparators for mixed-signal front ends. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data RAM, and a programmable peripheral set. The PIC32MZ family belongs to the broader 32-bit MCU category that bridges 8/16-bit legacy controllers and full application processors. Microchip's PIC32MZ Embedded Connectivity (EC) line targets connected industrial and consumer products where deterministic real-time control, large Flash for over-the-air (OTA) updates, and rich wired connectivity (USB, Ethernet, CAN) must coexist on one die. Within that family, the EC devices offer FPU-less MIPS32 microAptiv cores; the newer EF variants add a hardware Floating-Point Unit (FPU). The PIC32MZ1024ECG144 sits at the high end of the EC family with the largest Flash option in the 144-pin LQFP pinout. Key differentiating features include the 3.28 CoreMark/MHz DSP efficiency, four 64-bit accumulators with single-cycle MAC and saturating/fractional math for audio and motor-control DSP, dual-panel Flash enabling live field firmware updates without downtime, and a Memory Management Unit (MMU) for RTOS and embedded Linux portability. microMIPS mode compresses code by up to 35% to maximize the 1 MB Flash budget. An integrated 8-channel hardware DMA engine offloads data movement between peripherals and RAM, freeing CPU cycles for application logic. The part's crypto-capable MCU features and secure Flash regions support tamper-resistant firmware storage. Typical applications span industrial IoT gateways, building automation controllers, audio amplifiers with USB streaming, Ethernet-enabled HMI panels, multi-protocol sensor hubs, and graphics-rich control panels that use the parallel master port to drive external TFT LCDs. The combination of large RAM and SQI lets designers add fast SPI/QSPI memory expansion for data logging without redesigning the pinout. When laying out a board, keep the 144-pin LQFP decoupling network tight (100 nF + 1 µF per VDD/VSS pair) and route the HS USB differential pair as a 90 Ω impedance-matched length-matched pair with a grounded coplanar waveguide; missing this risks USB certification failures. Plan for firmware image storage in dual-panel Flash from day one to enable in-field live updates without bricking units.

USD $7,40 En stock

PIC32MZ1024ECG144T-I/PH

PIC32MZ1024ECG144T-I/PH - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024ECG144T-I/PH is a 32-bit MIPS32 microAptiv PIC32MZ microcontroller integrating 1 MB of Flash, 512 KB of SRAM, and a 200 MHz CPU core in a 144-pin TQFP (16x16 mm) package. The "T" suffix indicates tape-and-reel packaging and "-I/PH" denotes the industrial temperature grade (-40C to +85C) and the PH 144-TQFP package option. According to the Microchip product page, this part belongs to the PIC32MZ EC family, which adds a dedicated 10/100 Ethernet MAC and a High-Speed USB 2.0 PHY/Controller on top of the standard PIC32MZ EF peripheral set. A 32-bit MCU (microcontroller unit) is an integrated processor core with program memory, data RAM, and on-chip peripherals (timers, communication controllers, ADC) on a single die. The PIC32MZ family sits in the high-performance tier of Microchip's PIC32 portfolio, targeting industrial, HMI, and connected-embedded applications where both deterministic real-time behavior and rich connectivity are required. Key features of the PIC32MZ1024ECG144T-I/PH include a 200 MHz MIPS32 microAptiv core with single-cycle multiply/divide, dual I/O ports supplying up to 120 general-purpose I/O pins, a 12-bit 18 MSPS ADC with up to 48 analog inputs, six UART, four SPI, and five I2C peripherals, plus a 10/100 Mbps Ethernet MAC with MII/RMII interface and a USB 2.0 High-Speed PHY/OTG controller with dedicated transceiver. The 200 MHz core combined with the 32-bit data path delivers roughly 330 DMIPS and 1.5 DMIPS/MHz efficiency, while the 512 KB SRAM supports large TCP/IP stacks (TCP/IP Lite, MPLAB Harmony Net) without external memory. The Peripheral Pin Select (PPS) feature allows most digital peripheral signals to be remapped to a wide range of I/O pins, simplifying PCB layout and reducing pin conflicts in complex designs. Typical applications include industrial Ethernet gateways, networked PLCs and motor controllers, USB-enabled HMI terminals, secure IoT edge nodes, automotive infotainment peripherals (non-safety-relevant), and medical data acquisition front-ends. The integrated Ethernet MAC and USB HS controller allow designs to ship without external PHY/bridge chips on the same PCB. When designing with this device, pay attention to power-supply sequencing: the core (1.8V) and I/O (3.3V) domains should ramp together or core-first to avoid latch-up. Use a 22 uF + 0.1 uF decoupling network near each VDDCORE/VDDIO pin pair, and place the 12 MHz external crystal within 10 mm of the OSCI/OSCO pins with short, symmetric traces to meet the HS USB jitter budget. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $10,85 En stock

PIC32MZ1024ECG144T-I/PL

PIC32MZ1024ECG144T-I/PL - 200MHz 32-bit MCU, 1MB Flash, Ethernet | Microchip

The Microchip Technology PIC32MZ1024ECG144T-I/PL is a 32-bit MIPS32 microAptiv PIC32MZ microcontroller operating at up to 200 MHz with 1 MB of Flash program memory and 512 KB of SRAM, housed in a 144-pin LQFP (20x20 mm) package. It belongs to the PIC32MZ EC family and integrates an Ethernet MAC, USB, CAN, and a Peripheral Pin Select (PPS) system that maps digital peripherals to a wide range of I/O pins. A 32-bit microcontroller (MCU) is an integrated processor that combines a CPU core, program memory, data memory, and a rich set of peripherals into a single chip. Within the broader taxonomy, the PIC32MZ EC family sits at: 32-bit MCU -> embedded microcontroller -> microprocessor -> semiconductor IC. The PIC32MZ EC line specifically targets high-performance connected applications, bridging the gap between traditional 8/16-bit MCUs and Cortex-M-class parts by offering an instruction-efficient MIPS32 core plus deterministic interrupt handling and dual-bank Flash for live firmware updates. Key differentiating features of this part include 200 MHz core speed with hardware multiply/divide, dual 10-bit ADC blocks with up to 48 input channels, six UART, four SPI, five I2C, and dedicated Ethernet and USB controllers. The integrated crypto engine, real-time clock, and 16-bit Parallel Master Port make it a fit for gateways, industrial HMIs, and graphics-enabled edge nodes. Architecturally, the device uses a 5-stage MIPS32 pipeline with separate I-cache and D-cache (typically 16 KB each on the EC family), tightly coupled to 512 KB SRAM and 1 MB dual-panel Flash with live-update support. The 144-pin LQFP (PL suffix) package exposes the maximum I/O count for the family - all peripheral pin-select remappable signals, full 32-bit external bus, and dedicated analog/digital guard pins for noise isolation. Typical applications include industrial Ethernet gateways, building-automation controllers, point-of-sale terminals, medical instrumentation with USB connectivity, and 32-bit migration paths from PIC32MX designs. Its combination of deterministic interrupt latency and on-chip Ethernet makes it especially attractive for real-time communication stacks. When designing with this MCU, allocate at least 4-layer PCB routing for the external bus and place a 100 nF decoupling capacitor on every VDD/VSS pair. Use the PPS system carefully: the same physical pin cannot host multiple remapped peripherals, so plan the peripheral map in MPLAB Harmony Configurator before laying out the board. This page synthesizes distributor pricing, pin-to-pin compatible PIC32MZ siblings, and practical design considerations that are not aggregated in the manufacturer datasheet alone.

USD $8,95 En stock

PIC32MZ1024ECH064-I/MR

PIC32MZ1024ECH064-I/MR - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024ECH064-I/MR is a 32-bit MIPS32 microAptiv-based microcontroller running up to 200 MHz with 1 MB of Flash and 512 KB of SRAM, housed in a 64-pin VQFN (MR) package with exposed thermal pad. It delivers 330 DMIPS / 3.28 CoreMark/MHz and integrates high-speed connectivity including 10/100 Ethernet MAC, HS USB 2.0 (Host/Device/OTG), CAN 2.0, plus audio/graphics interfaces. A microcontroller (MCU) is a single-chip computer integrating a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), and a rich set of peripherals on one die. The PIC32MZ EC family belongs to Microchip's high-performance MIPS32 line, with the ECH variant emphasizing embedded connectivity (Ethernet + CAN + USB) for industrial HMI, IoT gateways, and audio/graphics products. Within the power management and embedded hierarchy: microcontroller -> embedded MCU -> 32-bit MCU -> PIC32MZ family. Key specifications include 200 MHz core with 2.5 MB dual-panel live-update Flash (1 MB primary + 1 MB secondary), 512 KB SRAM, 53 selectable I/O lines, eight hardware-programmable DMA channels plus 16 dedicated DMA channels, a 12-bit 5 MSPS ADC with up to 48 channels, four I2S/SPI audio interfaces, an integrated graphics LCD controller, and Peripheral Pin Select (PPS) for flexible function remapping. The architecture combines a 5-stage MIPS32 microAptiv pipeline with tightly-coupled SRAM and dedicated DMA, achieving deterministic real-time response at full 200 MHz while the dual-panel Flash allows field firmware upgrades without downtime. On-chip regulators and brown-out reset simplify power design at 3.3 V typical operation. Typical applications include industrial IoT gateways, Ethernet-enabled motor controllers, automotive infotainment head units, HMI panels with graphics LCD, audio processing (I2S/USB streaming), medical instrumentation, and USB device/host peripherals. For PCB layout, route the Ethernet MII/RMII differential pairs with 100-ohm impedance and length matching, place the 24 MHz crystal traces short and symmetric, and provide a solid ground plane under the exposed pad for thermal dissipation of up to 2 W continuous operation. This page synthesizes distributor pricing (DigiKey/Mouser/LCSC as of 2026-10-04), verified drop-in PIC32MZ alternative MPNs, and practical design notes not found in the manufacturer datasheet alone.

USD $4,95 En stock

Sous-catégories

Produits (32725)