2EDL8033G4BXTMA1 vs 2EDL8034G4CXTMA1 Comparaison
Comparaison détaillée côte à côte de 2EDL8033G4BXTMA1 par Infineon et 2EDL8034G4CXTMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | 2EDL8033G4BXTMA1 | 2EDL8034G4CXTMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,49 | $1,55 |
| Topologie | Half-bridge (high-side + low-side) | — |
| Maximum Bootstrap Voltage (VBS) | 120 V | — |
| Source Drive Current | 3 A | — |
| Sink Drive Current | 4 A | — |
| Number of Channels | 2 (HS + LS) | — |
| Isolation Type | Junction-isolated (non-galvanic) | Junction-isolated (level-shifted) |
| Input Logic Compatibility | TTL | 3.3 V / 5 V |
| Input Common-Mode Range | -10 V to 20 V | — |
| Input Type | Independent HS and LS | — |
| Integrated Dead-Time Control | Yes (programmable) | — |
| Under-Voltage Lockout (VCC/VDD) | Yes | — |
| Under-Voltage Lockout (VBS/High-Side) | Yes | — |
| Shoot-Through Protection | Yes | — |
| Boîtier | PG-VDSON-8-5 | PG-VDSON-10-2 (DSN-10) with exposed pad |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant | — |
| Marking Code | 2ED8033G4B | — |
| Driver Type | — | Half-Bridge (High-Side / Low-Side) |
| Configuration | — | Non-Inverting |
| Bootstrap Voltage (Max) | — | 120 V |
| Peak Source Current | — | 3 A |
| Peak Sink Current | — | 4 A |
| Nombre de sorties | — | 2 |
| Rise Time (Typical) | — | [DATA_NEEDED: rise time ns] |
| Fall Time (Typical) | — | [DATA_NEEDED: fall time ns] |
| Propagation Delay (Typical) | — | [DATA_NEEDED: propagation delay ns] |
| VCC Supply Voltage | — | [DATA_NEEDED: VCC range V] |
| UVLO Protection | — | Yes (VCC and VBS) |
| ESD Rating (HBM) | — | [DATA_NEEDED: ESD HBM kV] |
| Température de jonction en fonctionnement | — | -40 C to +125 C |
| Lead-Free / RoHS | — | Yes (per Infineon product page) |
| Niveau MSL | — | [DATA_NEEDED: MSL level] |