6EDL04N03PRXUMA1 vs 6EDL04N02PRXUMA1 Comparaison

Comparaison détaillée côte à côte de 6EDL04N03PRXUMA1 par Infineon et 6EDL04N02PRXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Infineon
6EDL04N02PRXUMA1 6EDL04N02PRXUMA1 - 200V 3-Phase Gate Driver IC | Infineon

6EDL04N02PRXUMA1 - 200V 3-Phase Gate Driver IC | Infineon

6EDL04N02PRXUMA1 ✓ Actif

Comparaison des spécifications

Paramètre 6EDL04N03PRXUMA1 6EDL04N02PRXUMA1
Marque Infineon Infineon
Catégorie Power MOSFET Drivers Power MOSFET Drivers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $1,85 $2,32
Driver Type Three-phase gate driver (6-channel half-bridge) —
Number of Drivers 6 —
Configuration de sortie Non-inverting half-bridge —
Supply Voltage (VDD) 10 V to 25 V —
Logic Supply Voltage (VSS) 3.3 V / 5 V —
Output Current (Source) 0.24 A —
Output Current (Sink) 0.375 A —
Temps de montée 60 ns (typical at 1 nF load) —
Temps de descente 26 ns (typical at 1 nF load) —
Bootstrap Diode Integrated (3 channels) Integrated (BSD) on all 3 high-side drivers
Over-Current Protection Yes (adjustable threshold via ITRIP) Yes (single-shunt, ITRIP/CIN pin)
Fault Output Yes (open-drain) —
Broche d'activation Yes (EN, active-high) —
Propagation Delay [DATA_NEEDED: propagation delay] —
Température de fonctionnement -40 C to +125 C —
Boîtier PG-TSSOP-25 PG-TSSOP-28 (28-pin, 4.40 mm width, exposed pad)
Type de montage Surface Mount Surface Mount
Niveau MSL 3 MSL3 (per JEDEC J-STD-020, [DATA_NEEDED: confirm level])
Statut RoHS Compliant Compliant
Blocking Voltage 200 V / 600 V family —
Product Type — 3-Phase Gate Driver IC
Driver Configuration — Half-bridge (3 high-side + 3 low-side)
Maximum Blocking Voltage — +180 V (VS referenced to GND for high side)
Rated Supply Voltage (VCC) — 200 V class (operating range 10 V to 20 V on VCC)
Source Current (typ.) — 0.375 A
Sink Current (typ.) — 0.75 A
Enable Pin (EN) — Yes (active-high)
Fault Output (nFAULT) — Yes (active-low, open-drain)
Input Logic Compatibility — CMOS / LSTTL, 3.3 V and 5 V
Interlocking / Anti-shoot-through — Yes (built-in per phase pair)
Process Technology — Thin-film SOI (Silicon-On-Insulator)
Plage de température de fonctionnement — -40 °C to +125 °C
Maximum Junction Temperature — +150 °C
Target Switches — MOSFETs up to 180 V, IGBTs up to 180 V

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis