BTS3035TFATMA1 vs BTN9960LVAUMA1 Comparaison
Comparaison détaillée côte à côte de BTS3035TFATMA1 par Infineon et BTN9960LVAUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS3035TFATMA1 | BTN9960LVAUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,61 | $2,44 |
| Product Type | Low-Side Power Switch | Integrated Half-Bridge Motor Driver |
| Technology | N-Channel MOSFET | — |
| Number of Channels | 1 | — |
| Input Type | CMOS Logic Level | — |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| Plage de température de fonctionnement | -40C to +150C (junction) | -40C to +150C |
| Boîtier | PG-TO252-3-313 (DPAK) | PG-HSOF-7-1 |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | [DATA_NEEDED: MSL moisture sensitivity level] | — |
| Statut RoHS | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified | — |
| Topologie | — | P-channel high-side + N-channel low-side MOSFET with integrated driver IC |
| Path Resistance (typ @ 25C) | — | 9.7 mOhm |
| Overcurrent Detection Threshold | — | 35 A |
| Supply Voltage Range (operating) | — | 8 V to 18 V |
| Supply Voltage Range (max rating) | — | 40 V |
| Logic Input Low Voltage (max) | — | 1.3 V |
| Logic Input High Voltage (min) | — | 1.6 V |
| Turn-On Rise Time (typ) | — | 2.5 us |
| Turn-Off Fall Time (typ) | — | 250 ns |
| Dead Time (typ) | — | 250 ns |
| Standby Current (max) | — | 3.3 uA |
| Propagation Delay (typ) | — | 3.6 us |
| AEC-Q100 Qualification | — | Grade 1 qualified |
| Protection Features | — | Under-voltage, Over-current, Short-circuit, Over-temperature, Interleaved (shoot-through), Enable shutdown, Dead-time control |