BTS3035TFATMA1 vs BTN9960LVAUMA1 Comparação
Comparação detalhada lado a lado de BTS3035TFATMA1 por Infineon e BTN9960LVAUMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | BTS3035TFATMA1 | BTN9960LVAUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power MOSFET Drivers | Motor Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $0,61 | $2,44 |
| Product Type | Low-Side Power Switch | Integrated Half-Bridge Motor Driver |
| Technology | N-Channel MOSFET | — |
| Number of Channels | 1 | — |
| Input Type | CMOS Logic Level | — |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| Faixa de temperatura de operação | -40C to +150C (junction) | -40C to +150C |
| Encapsulamento | PG-TO252-3-313 (DPAK) | PG-HSOF-7-1 |
| Tipo de montagem | Surface Mount | Surface Mount |
| Nível MSL | [DATA_NEEDED: MSL moisture sensitivity level] | — |
| Status RoHS | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified | — |
| Topologia | — | P-channel high-side + N-channel low-side MOSFET with integrated driver IC |
| Path Resistance (typ @ 25C) | — | 9.7 mOhm |
| Overcurrent Detection Threshold | — | 35 A |
| Supply Voltage Range (operating) | — | 8 V to 18 V |
| Supply Voltage Range (max rating) | — | 40 V |
| Logic Input Low Voltage (max) | — | 1.3 V |
| Logic Input High Voltage (min) | — | 1.6 V |
| Turn-On Rise Time (typ) | — | 2.5 us |
| Turn-Off Fall Time (typ) | — | 250 ns |
| Dead Time (typ) | — | 250 ns |
| Standby Current (max) | — | 3.3 uA |
| Propagation Delay (typ) | — | 3.6 us |
| AEC-Q100 Qualification | — | Grade 1 qualified |
| Protection Features | — | Under-voltage, Over-current, Short-circuit, Over-temperature, Interleaved (shoot-through), Enable shutdown, Dead-time control |