INA110KPG4 vs INA110KP Comparaison
Comparaison détaillée côte à côte de INA110KPG4 par Texas Instruments et INA110KP par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA110KPG4 - Fast-Settling FET Instrumentation Amplifier | Texas Instruments
INA110KPG4 ObsoleteTexas Instruments
INA110KP - Fast-Settling FET-Input Instrumentation Amplifier | TI
INA110KP ✓ ActifComparaison des spécifications
| Paramètre | INA110KPG4 | INA110KP |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Obsolete | Actif |
| Product Type | Fast-settling FET-input instrumentation amplifier | — |
| Internal Amplifier Count | 3 amplifiers | — |
| Supply Voltage Range | ±6 V to ±18 V | 12 V to 36 V |
| Input Offset Voltage | 500 µV | — |
| Bandwidth | 2.5 MHz | 2.5 MHz |
| Type de sortie | Single-ended | — |
| Input Stage | FET-input | — |
| Available Gains | 1, 10, 100, and 1000 | — |
| Boîtier | 16-pin PDIP | 16-pin plastic DIP (PDIP) |
| Package Pin Count | 16 pins | — |
| Package Row Spacing | 7.62 mm | — |
| Package Pitch | 0.300 in | — |
| Style de montage | Through-hole | — |
| Statut du cycle de vie | Inactive | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Courant de repos | [DATA_NEEDED: quiescent current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | 106 dB minimum at 10 kHz |
| Slew Rate | [DATA_NEEDED: slew rate] | 17 V/µs |
| Amplifier Type | — | Instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Input Type | — | FET input |
| Topologie | — | Current feedback |
| Internal Gains | — | 1, 10, 100, 200, and 500 V/V |
| Settling Time | — | 4 µs to 0.01% |
| Maximum Input Bias Current | — | 50 pA |
| Gain Drift | — | 50 ppm/°C maximum |
| Offset Drift | — | 2 µV/°C maximum |
| Offset Voltage | — | 500 µV maximum |
| Nombre de broches | — | 16 pins |
| Type de montage | — | Through-hole |
| Input Filter Capability | — | Supported by high input impedance and low input bias current |