INA110KPG4 vs INA110KP Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA110KPG4 tarafından Texas Instruments ve INA110KP tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
INA110KPG4 - Fast-Settling FET Instrumentation Amplifier | Texas Instruments
INA110KPG4 ObsoleteTexas Instruments
INA110KP - Fast-Settling FET-Input Instrumentation Amplifier | TI
INA110KP ✓ AktifÖzellik Karşılaştırması
| Parametre | INA110KPG4 | INA110KP |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Obsolete | Aktif |
| Product Type | Fast-settling FET-input instrumentation amplifier | — |
| Internal Amplifier Count | 3 amplifiers | — |
| Supply Voltage Range | ±6 V to ±18 V | 12 V to 36 V |
| Input Offset Voltage | 500 µV | — |
| Bandwidth | 2.5 MHz | 2.5 MHz |
| Çıkış Türü | Single-ended | — |
| Input Stage | FET-input | — |
| Available Gains | 1, 10, 100, and 1000 | — |
| Paket | 16-pin PDIP | 16-pin plastic DIP (PDIP) |
| Package Pin Count | 16 pins | — |
| Package Row Spacing | 7.62 mm | — |
| Package Pitch | 0.300 in | — |
| Montaj Stili | Through-hole | — |
| Yaşam Döngüsü Durumu | Inactive | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Durağan Akım | [DATA_NEEDED: quiescent current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | 106 dB minimum at 10 kHz |
| Slew Rate | [DATA_NEEDED: slew rate] | 17 V/µs |
| Amplifier Type | — | Instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Input Type | — | FET input |
| Ağ Yapısı | — | Current feedback |
| Internal Gains | — | 1, 10, 100, 200, and 500 V/V |
| Settling Time | — | 4 µs to 0.01% |
| Maximum Input Bias Current | — | 50 pA |
| Gain Drift | — | 50 ppm/°C maximum |
| Offset Drift | — | 2 µV/°C maximum |
| Offset Voltage | — | 500 µV maximum |
| Pin Sayısı | — | 16 pins |
| Montaj Türü | — | Through-hole |
| Input Filter Capability | — | Supported by high input impedance and low input bias current |