INA110KPG4 vs INA110KP 比較
詳細な並列比較: INA110KPG4 メーカー: Texas Instruments および INA110KP メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
INA110KPG4 - Fast-Settling FET Instrumentation Amplifier | Texas Instruments
INA110KPG4 Obsolete仕様比較
| パラメータ | INA110KPG4 | INA110KP |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | Obsolete | 有効 |
| Product Type | Fast-settling FET-input instrumentation amplifier | — |
| Internal Amplifier Count | 3 amplifiers | — |
| Supply Voltage Range | ±6 V to ±18 V | 12 V to 36 V |
| Input Offset Voltage | 500 µV | — |
| Bandwidth | 2.5 MHz | 2.5 MHz |
| 出力タイプ | Single-ended | — |
| Input Stage | FET-input | — |
| Available Gains | 1, 10, 100, and 1000 | — |
| パッケージ | 16-pin PDIP | 16-pin plastic DIP (PDIP) |
| Package Pin Count | 16 pins | — |
| Package Row Spacing | 7.62 mm | — |
| Package Pitch | 0.300 in | — |
| 実装スタイル | Through-hole | — |
| ライフサイクル状態 | Inactive | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 静止電流 | [DATA_NEEDED: quiescent current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | 106 dB minimum at 10 kHz |
| Slew Rate | [DATA_NEEDED: slew rate] | 17 V/µs |
| Amplifier Type | — | Instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Input Type | — | FET input |
| トポロジー | — | Current feedback |
| Internal Gains | — | 1, 10, 100, 200, and 500 V/V |
| Settling Time | — | 4 µs to 0.01% |
| Maximum Input Bias Current | — | 50 pA |
| Gain Drift | — | 50 ppm/°C maximum |
| Offset Drift | — | 2 µV/°C maximum |
| Offset Voltage | — | 500 µV maximum |
| ピン数 | — | 16 pins |
| 実装タイプ | — | Through-hole |
| Input Filter Capability | — | Supported by high input impedance and low input bias current |