INA110KPG4 vs INA110KP Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci INA110KPG4 disebabkan oleh Texas Instruments dan INA110KP disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
INA110KPG4 - Fast-Settling FET Instrumentation Amplifier | Texas Instruments
INA110KPG4 ObsoleteTexas Instruments
INA110KP - Fast-Settling FET-Input Instrumentation Amplifier | TI
INA110KP ✓ AktifPengandingan Spesifikasi
| Parametr | INA110KPG4 | INA110KP |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Obsolete | Aktif |
| Product Type | Fast-settling FET-input instrumentation amplifier | — |
| Internal Amplifier Count | 3 amplifiers | — |
| Supply Voltage Range | ±6 V to ±18 V | 12 V to 36 V |
| Input Offset Voltage | 500 µV | — |
| Bandwidth | 2.5 MHz | 2.5 MHz |
| Jenis Output | Single-ended | — |
| Input Stage | FET-input | — |
| Available Gains | 1, 10, 100, and 1000 | — |
| Kemasan | 16-pin PDIP | 16-pin plastic DIP (PDIP) |
| Package Pin Count | 16 pins | — |
| Package Row Spacing | 7.62 mm | — |
| Package Pitch | 0.300 in | — |
| Gaya Pemasangan | Through-hole | — |
| Status Lingkungan Hidup | Inactive | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Gambaran Suhu Operasi | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Arus Dalam Tentera | [DATA_NEEDED: quiescent current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | 106 dB minimum at 10 kHz |
| Slew Rate | [DATA_NEEDED: slew rate] | 17 V/µs |
| Amplifier Type | — | Instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Input Type | — | FET input |
| Tetstruktur | — | Current feedback |
| Internal Gains | — | 1, 10, 100, 200, and 500 V/V |
| Settling Time | — | 4 µs to 0.01% |
| Maximum Input Bias Current | — | 50 pA |
| Gain Drift | — | 50 ppm/°C maximum |
| Offset Drift | — | 2 µV/°C maximum |
| Offset Voltage | — | 500 µV maximum |
| Kiraan Pin | — | 16 pins |
| Jenis Pemasangan | — | Through-hole |
| Input Filter Capability | — | Supported by high input impedance and low input bias current |