ITS4035SEPDXUMA1 vs BTS70402EPGXUMA1 Comparaison
Comparaison détaillée côte à côte de ITS4035SEPDXUMA1 par Infineon et BTS70402EPGXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ITS4035SEPDXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,31 | $3,18 |
| Switch Type | Single-channel Smart High-Side Power Switch | — |
| Topologie | 1:1 N-Channel MOSFET | — |
| RDS(ON) (typical) | 35 mΩ at 25 °C | — |
| Continuous Output Current | 13.2 A | — |
| Current Limit (programmable) | 3 A to 13.2 A | — |
| Operating Supply Voltage (Vbb) | 5 V to 28 V | — |
| Logic-Level Input (IN) | Active high, CMOS/TTL compatible | — |
| Status Output (ST) | Open-drain diagnostic flag | — |
| Protection Features | Overcurrent, Overtemperature, Short-Circuit, Overvoltage, Ground-Loss, Reverse Polarity | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Plage de température de fonctionnement | -40 °C to +150 °C | -40 °C to +150 °C junction |
| Boîtier | PG-TSDSO-14 (Exposed Pad) | PG-TSDSO-14 (exposed thermal pad) |
| Type de montage | Surface Mount | Surface Mount |
| Family | PROFET™ Industrial | — |
| Niveau MSL | [DATA_NEEDED: MSL level] | — |
| Statut RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fonction | — | Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| Configuration de sortie | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |