ITS4035SEPDXUMA1 vs BTS70402EPGXUMA1 Сравнение
Подробное сравнение бок о бок ITS4035SEPDXUMA1 от Infineon и BTS70402EPGXUMA1 от Infineon. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Сравнение характеристик
| Параметр | ITS4035SEPDXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Бренд | Infineon | Infineon |
| Категория | Power MOSFET Drivers | Power MOSFET Drivers |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $1,31 | $3,18 |
| Switch Type | Single-channel Smart High-Side Power Switch | — |
| Топология | 1:1 N-Channel MOSFET | — |
| RDS(ON) (typical) | 35 mΩ at 25 °C | — |
| Continuous Output Current | 13.2 A | — |
| Current Limit (programmable) | 3 A to 13.2 A | — |
| Operating Supply Voltage (Vbb) | 5 V to 28 V | — |
| Logic-Level Input (IN) | Active high, CMOS/TTL compatible | — |
| Status Output (ST) | Open-drain diagnostic flag | — |
| Protection Features | Overcurrent, Overtemperature, Short-Circuit, Overvoltage, Ground-Loss, Reverse Polarity | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Диапазон рабочих температур | -40 °C to +150 °C | -40 °C to +150 °C junction |
| Корпус | PG-TSDSO-14 (Exposed Pad) | PG-TSDSO-14 (exposed thermal pad) |
| Тип монтажа | Surface Mount | Surface Mount |
| Family | PROFET™ Industrial | — |
| Уровень MSL | [DATA_NEEDED: MSL level] | — |
| Статус RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Функция | — | Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| Выходная конфигурация | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |