ITS4035SEPDXUMA1 vs BTS70402EPGXUMA1 비교
다음의 상세 나란히 비교: ITS4035SEPDXUMA1 제조: Infineon 및 BTS70402EPGXUMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | ITS4035SEPDXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $1.31 | $3.18 |
| Switch Type | Single-channel Smart High-Side Power Switch | — |
| 토폴로지 | 1:1 N-Channel MOSFET | — |
| RDS(ON) (typical) | 35 mΩ at 25 °C | — |
| Continuous Output Current | 13.2 A | — |
| Current Limit (programmable) | 3 A to 13.2 A | — |
| Operating Supply Voltage (Vbb) | 5 V to 28 V | — |
| Logic-Level Input (IN) | Active high, CMOS/TTL compatible | — |
| Status Output (ST) | Open-drain diagnostic flag | — |
| Protection Features | Overcurrent, Overtemperature, Short-Circuit, Overvoltage, Ground-Loss, Reverse Polarity | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| 동작 온도 범위 | -40 °C to +150 °C | -40 °C to +150 °C junction |
| 패키지 | PG-TSDSO-14 (Exposed Pad) | PG-TSDSO-14 (exposed thermal pad) |
| 실장 유형 | Surface Mount | Surface Mount |
| Family | PROFET™ Industrial | — |
| MSL 레벨 | [DATA_NEEDED: MSL level] | — |
| RoHS 상태 | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| 기능 | — | Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| 출력 구성 | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |